Biohybrid CO2 electrolysis for the direct synthesis of polyesters from CO2.

Converting anthropogenic CO2 to value-added products using renewable energy has received much attention to achieve a sustainable carbon cycle. CO2 electrolysis has been extensively investigated, but the products have been limited to some C1-3 products. Here, we report the integration of CO2 electrolysis with microbial fermentation to directly produce poly-3-hydroxybutyrate (PHB), a microbial polyester, from gaseous CO2 on a gram scale. This biohybrid system comprises electrochemical conversion of CO2 to formate on Sn catalysts deposited on a gas diffusion electrode (GDE) and subsequent conversion of formate to PHB by Cupriavidus necator cells in a fermenter. The electrolyzer and the electrolyte solution were optimized for this biohybrid system. In particular, the electrolyte solution containing formate was continuously circulated through both the CO2 electrolyzer and the fermenter, resulting in the efficient accumulation of PHB in C. necator cells, reaching a PHB content of 83% of dry cell weight and producing 1.38 g PHB using 4 cm2 Sn GDE. This biohybrid system was further modified to enable continuous PHB production operated at a steady state by adding fresh cells and removing PHB. The strategies employed for developing this biohybrid system will be useful for establishing other biohybrid systems producing chemicals and materials directly from gaseous CO2.

The energy metabolism of Cupriavidus necator in different trophic conditions.

The "knallgas" bacterium Cupriavidus necator is attracting interest due to its extremely versatile metabolism. C. necator can use hydrogen or formic acid as an energy source, fixes CO2 via the Calvin-Benson-Bassham (CBB) cycle, and grows on organic acids and sugars. Its tripartite genome is notable for its size and duplications of key genes (CBB cycle, hydrogenases, and nitrate reductases). Little is known about which of these isoenzymes and their cofactors are actually utilized for growth on different substrates. Here, we investigated the energy metabolism of C. necator H16 by growing a barcoded transposon knockout library on succinate, fructose, hydrogen (H2/CO2), and formic acid. The fitness contribution of each gene was determined from enrichment or depletion of the corresponding mutants. Fitness analysis revealed that (i) some, but not all, molybdenum cofactor biosynthesis genes were essential for growth on formate and nitrate respiration. (ii) Soluble formate dehydrogenase (FDH) was the dominant enzyme for formate oxidation, not membrane-bound FDH. (iii) For hydrogenases, both soluble and membrane-bound enzymes were utilized for lithoautotrophic growth. (iv) Of the six terminal respiratory complexes in C. necator H16, only some are utilized, and utilization depends on the energy source. (v) Deletion of hydrogenase-related genes boosted heterotrophic growth, and we show that the relief from associated protein cost is responsible for this phenomenon. This study evaluates the contribution of each of C. necator's genes to fitness in biotechnologically relevant growth regimes. Our results illustrate the genomic redundancy of this generalist bacterium and inspire future engineering strategies.IMPORTANCEThe soil bacterium Cupriavidus necator can grow on gas mixtures of CO2, H2, and O2. It also consumes formic acid as carbon and energy source and various other substrates. This metabolic flexibility comes at a price, for example, a comparatively large genome (6.6 Mb) and a significant background expression of lowly utilized genes. In this study, we mutated every non-essential gene in C. necator using barcoded transposons in order to determine their effect on fitness. We grew the mutant library in various trophic conditions including hydrogen and formate as the sole energy source. Fitness analysis revealed which of the various energy-generating iso-enzymes are actually utilized in which condition. For example, only a few of the six terminal respiratory complexes are used, and utilization depends on the substrate. We also show that the protein cost for the various lowly utilized enzymes represents a significant growth disadvantage in specific conditions, offering a route to rational engineering of the genome. All fitness data are available in an interactive app at https://m-jahn.shinyapps.io/ShinyLib/.

CO2-based production of phytase from highly stable expression plasmids in Cupriavidus necator H16.

BACKGROUND: Existing plasmid systems offer a fundamental foundation for gene expression in Cupriavidus necator; however, their applicability is constrained by the limitations of conjugation. Low segregational stabilities and plasmid copy numbers, particularly in the absence of selection pressure, pose challenges. Phytases, recognized for their widespread application as supplements in animal feed to enhance phosphate availability, present an intriguing prospect for heterologous production in C. necator. The establishment of stable, high-copy number plasmid that can be electroporated would support the utilization of C. necator for the production of single-cell protein from CO2. RESULTS: In this study, we introduce a novel class of expression plasmids specifically designed for electroporation. These plasmids contain partitioning systems to boost segregation stability, eliminating the need for selection pressure. As a proof of concept, we successfully produced Escherichia coli derived AppA phytase in C. necator H16 PHB- 4 using these improved plasmids. Expression was directed by seven distinct promoters, encompassing the constitutive j5 promoter, hydrogenase promoters, and those governing the Calvin-Benson-Bassham cycle. The phytase activities observed in recombinant C. necator H16 strains ranged from 2 to 50 U/mg of total protein, contingent upon the choice of promoter and the mode of cell cultivation - heterotrophic or autotrophic. Further, an upscaling experiment conducted in a 1 l fed-batch gas fermentation system resulted in the attainment of the theoretical biomass. Phytase activity reached levels of up to 22 U/ml. CONCLUSION: The new expression system presented in this study offers a highly efficient platform for protein production and a wide array of synthetic biology applications. It incorporates robust promoters that exhibit either constitutive activity or can be selectively activated when cells transition from heterotrophic to autotrophic growth. This versatility makes it a powerful tool for tailored gene expression. Moreover, the potential to generate active phytases within C. necator H16 holds promising implications for the valorization of CO2 in the feed industry.

Carbon dioxide valorization into resveratrol via lithoautotrophic fermentation using engineered Cupriavidus necator H16.

BACKGROUND: Industrial biomanufacturing of value-added products using CO2 as a carbon source is considered more sustainable, cost-effective and resource-efficient than using common carbohydrate feedstocks. Cupriavidus necator H16 is a representative H2-oxidizing lithoautotrophic bacterium that can be utilized to valorize CO2 into valuable chemicals and has recently gained much attention as a promising platform host for versatile C1-based biomanufacturing. Since this microbial platform is genetically tractable and has a high-flux carbon storage pathway, it has been engineered to produce a variety of valuable compounds from renewable carbon sources. In this study, the bacterium was engineered to produce resveratrol autotrophically using an artificial phenylpropanoid pathway. RESULTS: The heterologous genes involved in the resveratrol biosynthetic pathway-tyrosine ammonia lyase (TAL), 4-coumaroyl CoA ligase (4CL), and stilbene synthase (STS) -were implemented in C. necator H16. The overexpression of acetyl-CoA carboxylase (ACC), disruption of the PHB synthetic pathway, and an increase in the copy number of STS genes enhanced resveratrol production. In particular, the increased copies of VvSTS derived from Vitis vinifera resulted a 2-fold improvement in resveratrol synthesis from fructose. The final engineered CR-5 strain produced 1.9 mg/L of resveratrol from CO2 and tyrosine via lithoautotrophic fermentation. CONCLUSIONS: To the best of our knowledge, this study is the first to describe the valorization of CO2 into polyphenolic compounds by engineering a phenylpropanoid pathway using the lithoautotrophic bacterium C. necator H16, demonstrating the potential of this strain a platform for sustainable chemical production.

Production of succinate with two CO2 fixation reactions from fatty acids in Cupriavidus necator H16.

BACKGROUND: Biotransformation of CO2 into high-value-added carbon-based products is a promising process for reducing greenhouse gas emissions. To realize the green transformation of CO2, we use fatty acids as carbon source to drive CO2 fixation to produce succinate through a portion of the 3-hydroxypropionate (3HP) cycle in Cupriavidus necator H16. RESULTS: This work can achieve the production of a single succinate molecule from one acetyl-CoA molecule and two CO2 molecules. It was verified using an isotope labeling experiment utilizing NaH13CO3. This implies that 50% of the carbon atoms present in succinate are derived from CO2, resulting in a twofold increase in efficiency compared to prior methods of succinate biosynthesis that relied on the carboxylation of phosphoenolpyruvate or pyruvate. Meanwhile, using fatty acid as a carbon source has a higher theoretical yield than other feedstocks and also avoids carbon loss during acetyl-CoA and succinate production. To further optimize succinate production, different approaches including the optimization of ATP and NADPH supply, optimization of metabolic burden, and optimization of carbon sources were used. The resulting strain was capable of producing succinate to a level of 3.6 g/L, an increase of 159% from the starting strain. CONCLUSIONS: This investigation established a new method for the production of succinate by the implementation of two CO2 fixation reactions and demonstrated the feasibility of ATP, NADPH, and metabolic burden regulation strategies in biological carbon fixation.

Synthetic biology toolkit of Ralstonia eutropha (Cupriavidus necator).

Synthetic biology encompasses many kinds of ideas and techniques with the common theme of creating something novel. The industrially relevant microorganism, Ralstonia eutropha (also known as Cupriavidus necator), has long been a subject of metabolic engineering efforts to either enhance a product it naturally makes (polyhydroxyalkanoate) or produce novel bioproducts (e.g., biofuels and other small molecule compounds). Given the metabolic versatility of R. eutropha and the existence of multiple molecular genetic tools and techniques for the organism, development of a synthetic biology toolkit is underway. This toolkit will allow for novel, user-friendly design that can impart new capabilities to R. eutropha strains to be used for novel application. This article reviews the different synthetic biology techniques currently available for modifying and enhancing bioproduction in R. eutropha. KEY POINTS: • R. eutropha (C. necator) is a versatile organism that has been examined for many applications. • Synthetic biology is being used to design more powerful strains for bioproduction. • A diverse synthetic biology toolkit is being developed to enhance R. eutropha's capabilities.

Non-Destructive Monitoring of Foliar Fungicide Efficacy with Hyperspectral Sensing in Grapevine.

Frequent fungicide applications are required to manage grapevine powdery mildew (Erysiphe necator). However, this practice is costly and has led to widespread fungicide resistance. A method of monitoring in-field fungicide efficacy could help growers maximize spray-interval length, thereby reducing costs and the rate of fungicide resistance emergence. The goal of this study was to evaluate if hyperspectral sensing in the visible to shortwave infrared range (400 to 2,400 nm) can quantify foliar fungicide efficacy on grape leaves. Commercial formulations of metrafenone, Bacillus mycoides isolate J (BmJ), and sulfur were applied on Chardonnay grapevines in vineyard or greenhouse settings. Foliar reflectance was measured with handheld hyperspectral spectroradiometers at multiple days post-application. Fungicide efficacy was estimated as a proxy for fungicide residue and disease control measured with the Blackbird microscopy imaging robot. Treatments could be differentiated from the untreated control with an accuracy of 73.06% for metrafenone, 67.76% for BmJ, and 94.10% for sulfur. The change in spectral reflectance was moderately correlated with the cube root of the area under the disease progress curve for metrafenone- and sulfur-treated samples (R2 = 0.38 and 0.36, respectively) and with sulfur residue (R2 = 0.42). BmJ treatment impacted foliar physiology by enhancing the leaf mass/area and reducing the nitrogen and total phenolic content as estimated from spectral reflectance. The results suggest that hyperspectral sensing can be used to monitor in-situ fungicide efficacy, and the prediction accuracy depends on the fungicide and the time point measured. The ability to monitor in-situ fungicide efficacy could facilitate more strategic fungicide applications and promote sustainable grapevine protection. [Formula: see text] Copyright © 2024 The Author(s). This is an open access article distributed under the CC BY-NC-ND 4.0 International license.

Expanding the synthetic biology toolbox of Cupriavidus necator for establishing fatty acid production.

The Gram-negative betaproteobacterium Cupriavidus necator is a chemolithotroph that can convert carbon dioxide into biomass. Cupriavidus necator has been engineered to produce a variety of high-value chemicals in the past. However, there is still a lack of a well-characterized toolbox for gene expression and genome engineering. Development and optimization of biosynthetic pathways in metabolically engineered microorganisms necessitates control of gene expression via functional genetic elements such as promoters, ribosome binding sites (RBSs), and codon optimization. In this work, a set of inducible and constitutive promoters were validated and characterized in C. necator, and a library of RBSs was designed and tested to show a 50-fold range of expression for green fluorescent protein (gfp). The effect of codon optimization on gene expression in C. necator was studied by expressing gfp and mCherry genes with varied codon-adaptation indices and was validated by expressing codon-optimized variants of a C12-specific fatty acid thioesterase to produce dodecanoic acid. We discuss further hurdles that will need to be overcome for C. necator to be widely used for biosynthetic processes.

Evaluation of Germicidal UV-C Light for Suppression of Grape Powdery Mildew and Botrytis Bunch Rot in Western Oregon.

Germicidal UV light (UV-C) has been shown to effectively suppress several plant pathogens as well as some arthropod pests. Recent reports describe the efficacy of nighttime applications of UV-C at doses from 100 to 200 J/m2 in vineyards to reduce grape powdery mildew (Erysiphe necator). Our in vitro studies confirmed the efficacy of UV-C to inhibit germination of E. necator and Botrytis cinerea conidia, demonstrated a range of tolerances to UV-C within a collection of E. necator isolates, and showed growth stage-specific effects of UV-C on B. cinerea. Nighttime use of UV-C was evaluated at 48 to 96 J/m2 in small plot trials (<1,000 vines) from 2020 to 2023. Once- or twice-weekly UV-C applications significantly reduced the incidence of foliar powdery mildew compared with non-UV-C-treated controls (P < 0.02). Suppression of powdery mildew on fruit was less consistent, where once or twice weekly UV-C exposure reduced powdery mildew disease severity in 2020 (P = 0.04), 2021 (P = 0.02), and 2023 (P = 0.003) but less so in 2022 (P = 0.07). Bunch rot severity was not significantly reduced with UV-C treatment in any year of the study. Application of UV-C until the onset of fruit color change (veraison) also had a minimal effect on the fruit-soluble solids, pH, anthocyanins, or phenolics in harvested fruit at any UV-C dose or frequency (P > 0.10). Suppression of powdery mildew by nighttime application of UV-C at lower doses in small plots suggests that such treatments merit further evaluation in larger-scale studies in Western Oregon.

Evaluation of Reduced Fungicide Applications for Disease Management in Cold-Climate Wine Grapes in Wisconsin.

Cold-climate wine grapes are produced on 8,000 ha in the North Central region of the United States. Wisconsin has experienced considerable growth, with a 26% increase in acreage since 2017. Chemical management of fungal diseases in cold-climate, interspecific hybrid grapes mirrors that of traditional Vitis vinifera cultivars despite significant differences in disease susceptibility. Most cold-climate cultivars display disease tolerance or resistance to key pathogens such as Plasmopara viticola (downy mildew), Erysiphe necator (powdery mildew), and Phyllosticta ampelicida (black rot). Current fungicide programs in Wisconsin's cold-climate grape industry underutilize genetic resistance, resulting in overreliance on at-risk fungicides and an increased threat of fungicide resistance development. In vineyard trials, the impacts of a reduced fungicide application number compared to current grower "Standard" programs was assessed for disease incidence and severity for five diseases: anthracnose, black rot, downy mildew, Phomopsis cane and leaf spot and powdery mildew. In 2022, with moderate disease pressure at both vineyard sites, there were no significant differences observed when fewer fungicides (six or five applications vs. four applications) were applied. In 2023, higher disease incidence was observed in the "Standard" spray program at one study location which received a greater number of fungicide applications. In both years, grape cultivar was a significant factor with the 'LaCrosse' displaying greater average disease severity than the 'St. Pepin' in both the "Standard" and "Reduced" Programs. These findings present a promising opportunity for cold-climate grape growers to reduce the number of fungicide applications while maintaining disease control and marketable yield.

First Report of Powdery Mildew on Vitis bryoniifolia Caused by Erysiphe necator in China.

Grapes, belonging to the genus Vitis, are one of the world's most economically valuable fruit crops, which are widely used as the source of wine, raisins, and juice. The genus Vitis contains about 60 species mainly distributed in Asia, Europe, and North America to northern South America (Wan et al. 2013). In May 2022, severe powdery mildew symptoms were found on wild Vitis bryoniifolia plants at Guizhou Normal University, Guiyang, China. The incidence observed was approximately 85% among 50 V. bryoniifolia plants. Infected leaves appear white powdery patches, eventually leading to chlorosis to necrosis. Mycelia occurred on adaxial and abaxial leaf surfaces, petioles and young shoots. Upon microscopic observation hyphae were hyaline and 3.5-6 µm wide. Hyphal appressoria were solitary and lobed to multilobed. Conidiophores were erect, straight to somewhat flexuous and 80-130 µm long (n = 30). Foot cells were subcylindrical to curved-sinuous at the base, followed by 2-4 cells. Conidia formed singly (occasionally 2-6 in a chain) and were ellipsoid to ovoid in shape with dimensions of 22.5-38 × 12-19.5 µm (n = 50). No fibrosin bodies were observed on conidia. Based on these morphological characteristics, the powdery mildew fungus strongly resembled Erysiphe necator (Braun and Takamasu 2000; Zheng et al. 1987) that has been shown to cause powdery mildew on Vitis (Gadoury et al. 2012; Gaforio et al. 2011; Qiu et al. 2015). To confirm the identification, the ribosomal DNA internal transcribed spacer (ITS) and the ribosomal large subunit (LSU) region were amplified and sequenced using the ITS1/ITS4 primer pair (White et al. 1990) and the NL1/NL4 primer pair (Ziemiecki et al. 1990), respectively. The spliced 1250-bp ITS-LSU sequence (GenBank accession no. PP188565) shared 99.84-100% identity with ITS-LSU sequences of E. necator (LC028995, LC028996, ON073862, LC777882, and OM033353). Based on the phylogenetic analysis of the combined ITS-LSU dataset of Erysiphe species (Takamasu et al. 2015), PP188565 was grouped in a clade with E. necator strains MUMH530, MUMHs141, and VPRI19719. To perform pathogenicity analysis, leaves of three healthy, potted 1-year-old V. bryoniifolia plants were inoculated by gently pressing with diseased leaves. Three non-inoculated healthy plants served as controls. All plants were incubated in a greenhouse at 25 ± 2°C with 80% relative humidity. Powdery mildew symptoms, similar to field conditions were observed on inoculated plants 13 days after inoculation, whereas control plants remained symptomless. Fungus reisolated from inoculated V. bryoniifolia plants was morphologically identical to that on originally diseased plants, and the spliced ITS-LSU sequence of reisolated fungus shared 100% identity with PP188565, fulfilling Koch's postulates. Based on the morphological and molecular characterizations, the powdery mildew fungus was identified as E. necator. To our knowledge, this is the first report of powdery mildew caused by E. necator on V. bryoniifolia in China. This work further expands the host range of Erysiphe necator on Vitis species.

Production of polyhydroxybutyrate by coupled saccharification-fermentation of inulin.

Inulin is a fructose-based polysaccharide that can be found in several plant species, from grass and onions to chicory roots; thus, it has the potential to be an excellent renewable source of fructose for several industrial applications. Among them, inulin hydrolysis can be coupled to a fermentation operation to produce polyhydroxybutyrate (PHB) using Cupriavidus necator H16. This work reports the PHB production process involving chicory root inulin hydrolysis using inulinase Novozym 960 followed by a C. necator fermentation. It was found that the maximum saccharification (95% wt.) was reached at 269 U/ginulin after 90 min. The hydrolysates obtained were then inoculated with C. necator, leading to a biomass concentration of 4 g/L with 30% (w/w) polymer accumulation. Although PHB production was low, during the first hours, the cell growth and polymer accumulation detected did not coincide with a fructose concentration decrease, suggesting a simultaneous saccharification and fermentation process, potentially alleviating the product inhibition inherent to the inulinase-fructose system. The characterization of the obtained PHB showed a polymer with more homogeneous values of Mw, and better thermal stability than PHB produced using pure fructose as a fermentation substrate. The results obtained demonstrate a viable alternative carbon substrate for PHB production, opening the possibility for inulin-rich renewable feedstock valorization.

Surveillance for Soil-Transmitted Helminths in High-Risk County, Mississippi, USA.

Recent reports of hookworm infection in Alabama, USA, has prompted surveillance in Mississippi, given the states' similar environmental conditions. We collected stool specimens from 277 children in Rankin County, Mississippi. Kato-Katz microscopic smear, agar plate culture, and quantitative PCR indicated no soil-transmitted helminths. Nevertheless, further surveillance in other high-risk Mississippi counties is warranted.

Hexameric structure of the flagellar master regulator FlhDC from Cupriavidus necator and its interaction with flagellar promoter DNA.

Bacterial flagella are assembled with ∼30 different proteins in a defined order via diverse regulatory systems. In gram-negative bacteria from the Gammaproteobacteria and Betaproteobacteria classes, the transcription of flagellar genes is strictly controlled by the master regulator FlhDC. In Gammaproteobacteria species, the FlhDC complex has been shown to activate flagellar expression by directly interacting with the promoter region in flagellar genes. To obtain the DNA-binding mechanism of FlhDC and determine the conserved and distinct structural features of Betaproteobacteria and Gammaproteobacteria FlhDCs that are necessary for their functions, we determined the crystal structure of Betaproteobacteria Cupriavidus necator FlhDC (cnFlhDC) and biochemically analyzed its DNA-binding capacity. cnFlhDC specifically recognized the promoter DNA of the class II flagellar genes flgB and flhB. cnFlhDC adopts a ring-like heterohexameric structure (cnFlhD4C2) and harbors two Zn-Cys clusters, as observed for Gammaproteobacteria Escherichia coli FlhDC (ecFlhDC). The cnFlhDC structure exhibits positively charged surfaces across two FlhDC subunits as a putative DNA-binding site. Noticeably, the positive patch of cnFlhDC is continuous, in contrast to the separated patches of ecFlhDC. Moreover, the ternary intersection of cnFlhD4C2 behind the Zn-Cys cluster forms a unique protruding neutral structure, which is replaced with a charged cavity in the ecFlhDC structure.

Surface wax in the ancestral grapevine Vitis sylvestris correlate with partial resistance to Powdery Mildew.

BACKGROUND: Powdery Mildew of Grapevine belongs to the major diseases in viticulture and requires intensive use of fungicides. Genetic introgression of resistance factors from wild grapes from North America and, recently, China, has been successful, but wine made from those varieties is still confronted with low consumer acceptance, due to differences in taste. RESULTS: The current work explores the potential of Vitis vinifera sylvestris, the wild ancestor of domesticated Grapevine, with respect to containing Erysiphe necator, the causative agent of Powdery Mildew. Making use of a germplasm collection comprising the entire genetic variability remaining in Germany, we show that there is considerable genetic variation in the formation of leaf surface waxes exceeding wax formation in commercial varieties. CONCLUSIONS: High wax formation correlates with reduced susceptibility to controlled infection with E. necator linked with perturbations of appressoria formation. We propose V. vinifera sylvestris as novel source for resistance breeding since it is genetically much closer to domesticated grapevine than the hitherto used sources from beyond the species barrier.

Engineering the biological conversion of formate into crotonate in Cupriavidus necator.

To advance the sustainability of the biobased economy, our society needs to develop novel bioprocesses based on truly renewable resources. The C1-molecule formate is increasingly proposed as carbon and energy source for microbial fermentations, as it can be efficiently generated electrochemically from CO2 and renewable energy. Yet, its biotechnological conversion into value-added compounds has been limited to a handful of examples. In this work, we engineered the natural formatotrophic bacterium C. necator as cell factory to enable biological conversion of formate into crotonate, a platform short-chain unsaturated carboxylic acid of biotechnological relevance. First, we developed a small-scale (150-mL working volume) cultivation setup for growing C. necator in minimal medium using formate as only carbon and energy source. By using a fed-batch strategy with automatic feeding of formic acid, we could increase final biomass concentrations 15-fold compared to batch cultivations in flasks. Then, we engineered a heterologous crotonate pathway in the bacterium via a modular approach, where each pathway section was assessed using multiple candidates. The best performing modules included a malonyl-CoA bypass for increasing the thermodynamic drive towards the intermediate acetoacetyl-CoA and subsequent conversion to crotonyl-CoA through partial reverse ß-oxidation. This pathway architecture was then tested for formate-based biosynthesis in our fed-batch setup, resulting in a two-fold higher titer, three-fold higher productivity, and five-fold higher yield compared to the strain not harboring the bypass. Eventually, we reached a maximum product titer of 148.0 ± 6.8 mg/L. Altogether, this work consists in a proof-of-principle integrating bioprocess and metabolic engineering approaches for the biological upgrading of formate into a value-added platform chemical.

Improving growth of Cupriavidus necator H16 on formate using adaptive laboratory evolution-informed engineering.

Conversion of CO2 to value-added products presents an opportunity to reduce GHG emissions while generating revenue. Formate, which can be generated by the electrochemical reduction of CO2, has been proposed as a promising intermediate compound for microbial upgrading. Here we present progress towards improving the soil bacterium Cupriavidus necator H16, which is capable of growing on formate as its sole source of carbon and energy using the Calvin-Benson-Bassham (CBB) cycle, as a host for formate utilization. Using adaptive laboratory evolution, we generated several isolates that exhibited faster growth rates on formate. The genomes of these isolates were sequenced, and resulting mutations were systematically reintroduced by metabolic engineering, to identify those that improved growth. The metabolic impact of several mutations was investigated further using RNA-seq transcriptomics. We found that deletion of a transcriptional regulator implicated in quorum sensing, PhcA, reduced expression of several operons and led to improved growth on formate. Growth was also improved by deleting large genomic regions present on the extrachromosomal megaplasmid pHG1, particularly two hydrogenase operons and the megaplasmid CBB operon, one of two copies present in the genome. Based on these findings, we generated a rationally engineered ΔphcA and megaplasmid-deficient strain that exhibited a 24% faster maximum growth rate on formate. Moreover, this strain achieved a 7% growth rate improvement on succinate and a 19% increase on fructose, demonstrating the broad utility of microbial genome reduction. This strain has the potential to serve as an improved microbial chassis for biological conversion of formate to value-added products.

Medium-Chain-Length Fatty Acid Catabolism in Cupriavidus necator H16: Transcriptome Sequencing Reveals Differences from Long-Chain-Length Fatty Acid ß-Oxidation and Involvement of Several Homologous Genes.

The number of genes encoding ß-oxidation enzymes in Cupriavidus necator H16 (synonym, Ralstonia eutropha H16) is high, but only the operons A0459-A0464 and A1526-A1531, each encoding four genes for ß-oxidation enzymes, were expressed during growth with long-chain-length fatty acids (LCFAs). However, we observed that C. necator ΔA0459-A0464 ΔA1526-A1531 and C. necator H16 showed the same growth behavior during growth with decanoic acid and shorter FAs. The negative effect of the deletion of these two operons increased with an increasing chain length of the utilized FAs. Transcriptome sequencing (RNA-Seq) revealed the expression profiles of genes involved in the catabolism of medium-chain-length fatty acids (MCFAs) in C. necator H16. Operon A0459-A0464 was expressed only during growth with nonanoic acid, whereas operon A1526-A1531 was highly expressed during growth with octanoic and nonanoic acid. The gene clusters B1187-B1192 and B0751-B0759 showed a log2 fold change in expression of up to 4.29 and 4.02, respectively, during growth with octanoic acid and up to 8.82 and 5.50, respectively, with nonanoic acid compared to sodium gluconate-grown cells. Several acyl-CoA ligases catalyze the activation of MCFAs with coenzyme A (CoA), but fadD3 (A3288), involved in activation of LCFAs, was not detected. The expression profiles of C. necator strain ΔA0459-A0464 ΔA1526-A1531 showed that the growth with nonanoic acid resulted in the expression of further ß-oxidation enzyme-encoding genes. Additional insights into the transport of FAs in C. necator H16 revealed the complexity and putative involvement of the DegV-like protein encoded by A0463 in the transport of odd-chain-length FAs and of siderophore biosynthesis in the transport mechanism. IMPORTANCE Although Cupriavidus necator H16 has been used in several studies to produce polyhydroxyalkanoates from various lipids, the fatty acid metabolism is poorly understood. The ß-oxidation of long-chain-length FAs has been investigated, but the tremendous number of homologous genes encoding ß-oxidation enzymes hides the potential for variances in the expressed genes for catabolism of shorter FAs. The catabolism of medium-chain-length FAs and connected pathways has not been investigated yet. As more sustainable substrates such as lipids and the production of fatty acids and fatty acid derivates become more critical with the dependency on fossil-based substances, understanding the complex metabolism in this highly diverse workhorse for biotechnology, C. necator, is inevitable. For further metabolic engineering and construction of production strains, we investigated the metabolism during growth on medium-chain-length FAs by RNA-Seq.

Toxicological evaluation of protein powder derived from Cupriavidus necator.

Microorganisms have the potential to produce nutrient-rich products that can be consumed as food or feed. The protein-rich powder derived from heat treatment of the whole-cell biomass of polyhydroxybutyrate-deficient Cupriavidus necator, a metabolically versatile organism that uses elements found in the air, is an example of such a product. To assess the safety of the protein powder for use as a nutritional ingredient in human food, in accordance with internationally accepted standards, its genotoxic potential and repeated-dose oral toxicity were investigated. A bacterial reverse mutation test, an in vitro mammalian chromosomal aberration test, and an in vivo mammalian micronucleus test were performed. No evidence of mutagenicity or genotoxicity was found. Additionally, a 90-day repeated-dose oral toxicity study in rats was completed, in which a total of 100 male and female Wistar rats were exposed by gavage to daily doses of 1000, 2000, or 3000 mg/kg bw/day of the test material. Following 90 days of continuous exposure, no mortality or treatment-related adverse effects were observed and no target organs were identified. Therefore, a no observed adverse effect level was determined at 3000 mg/kg bw/day, the highest dose tested.

Improved preculture management for Cupriavidus necator cultivations.

OBJECTIVES: Research on hydrogenases from Cupriavidus necator has been ongoing for more than two decades and still today the common methods for culture inoculation are used. These methods were never adapted to the requirements of modified bacterial strains, resulting in different physiological states of the bacteria in the precultures, which in turn lead prolonged and different lag-phases. RESULTS: In order to obtain uniform and always equally fit precultures for inoculation, we have established in this study an optimized protocol for precultures of the derivative of C. necator HF210 (C. necator HP80) which is used for homologous overexpression of the genes for the NAD+-reducing soluble hydrogenase (SH). We compared different media for preculture growth and determined the optimal time point for harvest. The protocol obtained in this study is based on two subsequent precultures, the first one in complex nutrient broth medium (NB) and a second one in fructose -nitrogen mineral salt medium (FN). CONCLUSION: Despite having two subsequent precultures our protocol reduces the preculture time to less than 30 h and provides reproducible precultures for cultivation of C. necator HP80.