Co-adaptor driven assembly of a CUL3 E3 ligase complex.

Cullin-RING E3 ligases (CRLs) are essential ubiquitylation enzymes that combine a catalytic core built around cullin scaffolds with ∼300 exchangeable substrate adaptors. To ensure robust signal transduction, cells must constantly form new CRLs by pairing substrate-bound adaptors with their cullins, but how this occurs at the right time and place is still poorly understood. Here, we show that formation of individual CRL complexes is a tightly regulated process. Using CUL3KLHL12 as a model, we found that its co-adaptor PEF1-ALG2 initiates CRL3 formation by releasing KLHL12 from an assembly inhibitor at the endoplasmic reticulum, before co-adaptor monoubiquitylation stabilizes the enzyme for substrate modification. As the co-adaptor also helps recruit substrates, its role in CRL assembly couples target recognition to ubiquitylation. We propose that regulators dedicated to specific CRLs, such as assembly inhibitors or co-adaptors, cooperate with target-agnostic adaptor exchange mechanisms to establish E3 ligase complexes that control metazoan development.

Distinct roles of the major binding residues in the cation-binding pocket of the melibiose transporter MelB.

Salmonella enterica serovar Typhimurium melibiose permease (MelBSt) is a prototype of the major facilitator superfamily (MFS) transporters, which play important roles in human health and diseases. MelBSt catalyzed the symport of galactosides with Na+, Li+, or H+ but prefers the coupling with Na+. Previously, we determined the structures of the inward- and outward-facing conformation of MelBSt and the molecular recognition for galactoside and Na+. However, the molecular mechanisms for H+- and Na+-coupled symport remain poorly understood. In this study, we solved two x-ray crystal structures of MelBSt, the cation-binding site mutants D59C at an unliganded apo-state and D55C at a ligand-bound state, and both structures display the outward-facing conformations virtually identical as published. We determined the energetic contributions of three major Na+-binding residues for the selection of Na+ and H+ by free energy simulations. Transport assays showed that the D55C mutant converted MelBSt to a solely H+-coupled symporter, and together with the free-energy perturbation calculation, Asp59 is affirmed to be the sole protonation site of MelBSt. Unexpectedly, the H+-coupled melibiose transport exhibited poor activities at greater bulky ΔpH and better activities at reversal ΔpH, supporting the novel theory of transmembrane-electrostatically localized protons and the associated membrane potential as the primary driving force for the H+-coupled symport mediated by MelBSt. This integrated study of crystal structure, bioenergetics, and free energy simulations, demonstrated the distinct roles of the major binding residues in the cation-binding pocket of MelBSt.

Threshold Interphase Delay for Bipolar Pulses to Prevent Cancellation Phenomenon during Electrochemotherapy.

Electroporation-based procedures employing nanosecond bipolar pulses are commonly linked to an undesirable phenomenon known as the cancelation effect. The cancellation effect arises when the second pulse partially or completely neutralizes the effects of the first pulse, simultaneously diminishing cells' plasma membrane permeabilization and the overall efficiency of the procedure. Introducing a temporal gap between the positive and negative phases of the bipolar pulses during electroporation procedures may help to overcome the cancellation phenomenon; however, the exact thresholds are not yet known. Therefore, in this work, we have tested the influence of different interphase delay values (from 0 ms to 95 ms) using symmetric bipolar nanoseconds (300 and 500 ns) on cell permeabilization using 10 Hz, 100 Hz, and 1 kHz protocols. As a model mouse hepatoma, the MH-22a cell line was employed. Additionally, we conducted in vitro electrochemotherapy with cisplatin, employing reduced interphase delay values (0 ms and 0.1 ms) at 10 Hz. Cell plasma membrane permeabilization and viability dependence on a variety of bipolar pulsed electric field protocols were characterized. It was shown that it is possible to minimize bipolar cancellation, enabling treatment efficiency comparable to monophasic pulses with identical parameters. At the same time, it was highlighted that bipolar cancellation has a significant influence on permeabilization, while the effects on the outcome of electrochemotherapy are minimal.

Pulsed electric field-assisted extraction of hesperidin from tangerine peel and its technological optimization through response surface methodology.

BACKGROUND: Tangerine peel is rich in flavonoids, particularly hesperidin, which has anti-inflammatory, antioxidant and anticancer biological activities. However, it is often wasted during citrus processing. The current common extraction method for hesperidin is solvent extraction, which has the characteristics of low extraction rate and high contamination. The aim of this study was to investigate the effect of pulsed electric field-assisted alkali dissolution extraction, followed by an acidification precipitation method, on the extraction rate and structure of hesperidin from tangerine peel. RESULTS: The results showed that the selected factors (material/liquid ratio, electric field intensity and pulse number) had a significant effect on the extraction yield. An optimum condition of 66.00 mL g-1, 4.00 kV cm-1 and 35.00 pulses gave the maximum amount (669.38 µg mL-1), which was consistent with the theoretically predicted value by software (672.10 µg mL-1), indicating that the extraction process was feasible. In addition, the purified extract was further identified as hesperidin from UV and NMR spectra. CONCLUSION: An appropriate strength of pulsed electric field-assisted alkali dissolution extraction followed by an acidification precipitation method can effectively improve the extraction rate of orange peel, and the purity of the extracted orange peel is higher. Compared with the traditional extraction, the pulsed electric field-assisted extraction method may be a potential technology for hesperidin extraction, which is beneficial for the high-value utilization of citrus resources. © 2024 Society of Chemical Industry.

The impact of the clip-tone training device and its smartphone application to pressurized metered-dose inhaler in adult asthmatics.

BACKGROUND: Despite traditional inhaler technique counseling, many patients make clinically important mistakes when they use their inhalers. This study investigates the value of using a connected inhalation aid when adults with asthma use their metered-dose inhaler (pMDI). METHODS: Adult asthmatics (n = 221), using a pMDI, were randomly divided into a verbal training group (n = 110) and an enhanced training group (n = 111). 21 subjects were lost during the study, each group included 100 subjects at the end of the study. The study was divided into 3 visits. Traditional pMDI training was delivered at visit 1 to both groups which included an explanation of the steps with special stress on frequently mistaken steps e.g. exhalation before use and inhaling slowly and deeply. The enhanced training group was enhanced by using the Clip-Tone training aid linked to its dedicated smartphone app. enhanced training patients were encouraged to use this connected training aid during real-life use between the study visits. Baseline data were collected at the first visit. At all three visits (baseline, 1 month, and 2 months), subjects first completed all inhaler techniques, health outcome measures, received inhaler training, then took bronchodilators, and 30 min later repeated the lung function outcome measures. RESULTS: Both groups showed a significant decrease (p < 0.001) in the total mean number of pMDI inhalation techniques mistakes at visits 2 and 3, with a lower number of mistakes (p < 0.05) for slower inhalations for the enhanced training group compared to the verbal training group. Inhalation time (an indicator of a slow inhalation) significantly (p < 0.05) improved at each visit in the enhanced training group. In the enhanced training group, there was a gradual significant increase (p < 0.05) in lung functions while the improvements in the verbal training group were only significant (p < 0.05) at visit 3, and by visit 3, the enhanced training group had significantly higher scores than the verbal training group on both FEV1 and PEF% predicted. The asthma control test (ACT) score improved at each visit in both groups with a greater increase in the enhanced training group (p < 0.05) and more patients (44 and 21) improved their score by 3 or more in the second and third visit respectively. CONCLUSION: The connected Clip-Tone training aid helped patients improve their pMDI inhaler technique and their asthma control compared to traditional methods. These results highlight the potential of connected inhalers in the future management of inhaled therapy.

Wild poliovirus type 3 (WPV3)-shedding event following detection in environmental surveillance of poliovirus essential facilities, the Netherlands, November 2022 to January 2023.

On 21 November 2022, a wild poliovirus type 3 (WPV3) was isolated from an environmental surveillance sample of poliovirus essential facilities in the Netherlands. All 51 employees with access to this strain were screened for ongoing or recent poliovirus infection. One employee shedding WPV3 was identified on 8 December and placed in isolation; monitoring and contact tracing were initiated. WPV3 shedding continued for 4 weeks and stopped 5 January 2023. Isolation was lifted 11 January and no further transmission was detected.

Polyphenol Extraction from Food (by) Products by Pulsed Electric Field: A Review.

Nowadays, more and more researchers engage in studies regarding the extraction of bioactive compounds from natural sources. To this end, plenty of studies have been published on this topic, with the interest in the field growing exponentially. One major aim of such studies is to maximize the extraction yield and, simultaneously, to use procedures that adhere to the principles of green chemistry, as much as possible. It was not until recently that pulsed electric field (PEF) technology has been put to good use to achieve this goal. This new technique exhibits many advantages, compared to other techniques, and they have successfully been reaped for the production of extracts with enhanced concentrations in bioactive compounds. In this advancing field of research, a good understanding of the existing literature is mandatory to develop more advanced concepts in the future. The aim of this review is to provide a thorough discussion of the most important applications of PEF for the enhancement of polyphenols extraction from fresh food products and by-products, as well as to discuss the current limitations and the prospects of the field.

Effect of heat and pulsed electric field treatment on the physicochemical and nutritional properties of carrots.

BACKGROUND: Carrots are widely used in home cooking and vegetable processing industries because of their high nutritional value. However, different processing methods may produce a negative impact on carrot texture and nutrition quality. Therefore, the development of better processing methods to preserve the texture and nutrition quality of carrots will be beneficial to the carrot industry. RESULTS: The effects of heat and pulsed electric field (PEF) treatments with different heat temperatures (T) and holding time (th ) on comprehensive changes in thermal efficiency profiles, and physicochemical (color, hardness, cell structural damage) and nutritional (releasable ß-carotene contents) properties of carrots were studied. In addition, electrical conductivity (σ) and soluble matter contents (°Brix) were determined for the heat-treated extracts. The value of total color difference (∆E) and cell structural damage index (Z) of carrots, σ and °Brix of extracts all increased with increasing T and th under different heat experimental conditions, whereas the value of cutting force (F) presented an opposite tendency and content of releasable ß-carotene decreased after th > 2 min at T = 100 °C. CONCLUSION: The results show that PEF heating is beneficial in preventing changes in physicochemical and nutritional properties of carrots compared to traditional heat treatment. PEF has potential as a heating technology in the food industry. © 2022 Society of Chemical Industry.

The S. pombe CDK5 ortholog Pef1 regulates sexual differentiation through control of the TORC1 pathway and autophagy.

In Schizosaccharomyces pombe, a general strategy for survival in response to environmental changes is sexual differentiation, which is triggered by TORC1 inactivation. However, mechanisms of TORC1 regulation in fission yeast remain poorly understood. In this study, we found that Pef1, which is an ortholog of mammalian CDK5, regulates the initiation of sexual differentiation through positive regulation of TORC1 activity. Conversely, deletion of pef1 leads to activation of autophagy and subsequent excessive TORC1 reactivation during the early phases of the nitrogen starvation response. This excessive TORC1 reactivation results in the silencing of the Ste11-Mei2 pathway and mating defects. Additionally, we found that pef1 genetically interacts with tsc1 and tsc2 for TORC1 regulation, and physically interacts with three cyclins, Clg1, Pas1 and Psl1. The double deletion of clg1 and pas1 promotes activation of autophagy and TORC1 during nitrogen starvation, similar to what is seen in pef1Δ cells. Overall, our work suggests that Pef1-Clg1 and Pef1-Pas1 complexes regulate initiation of sexual differentiation through control of the TSC-TORC1 pathway and autophagy.

Lung function and self-rated symptoms in healthy volunteers after exposure to hydrotreated vegetable oil (HVO) exhaust with and without particles.

BACKGROUND: Diesel engine exhaust causes adverse health effects. Meanwhile, the impact of renewable diesel exhaust, such as hydrotreated vegetable oil (HVO), on human health is less known. Nineteen healthy volunteers were exposed to HVO exhaust for 3 h in a chamber with a double-blind, randomized setup. Exposure scenarios comprised of HVO exhaust from two modern non-road vehicles with 1) no aftertreatment system ('HVOPM+NOx' PM1: 93 µg m-3, EC: 54 µg m-3, NO: 3.4 ppm, NO2: 0.6 ppm), 2) an aftertreatment system containing a diesel oxidation catalyst and a diesel particulate filter ('HVONOx' PM1: ~ 1 µg m-3, NO: 2.0 ppm, NO2: 0.7 ppm) and 3) filtered air (FA) as control. The exposure concentrations were in line with current EU occupational exposure limits (OELs) of NO, NO2, formaldehyde, polycyclic aromatic hydrocarbons (PAHs), and the future OEL (2023) of elemental carbon (EC). The effect on nasal patency, pulmonary function, and self-rated symptoms were assessed. Calculated predicted lung deposition of HVO exhaust particles was compared to data from an earlier diesel exhaust study. RESULTS: The average total respiratory tract deposition of PM1 during HVOPM+NOx was 27 µg h-1. The estimated deposition fraction of HVO PM1 was 40-50% higher compared to diesel exhaust PM1 from an older vehicle (earlier study), due to smaller particle sizes of the HVOPM+NOx exhaust. Compared to FA, exposure to HVOPM+NOx and HVONOx caused higher incidence of self-reported symptoms (78%, 63%, respectively, vs. 28% for FA, p < 0.03). Especially, exposure to HVOPM+NOx showed 40-50% higher eye and throat irritation symptoms. Compared to FA, a decrement in nasal patency was found for the HVONOx exposures (- 18.1, 95% CI: - 27.3 to - 8.8 L min-1, p < 0.001), and for the HVOPM+NOx (- 7.4 (- 15.6 to 0.8) L min-1, p = 0.08). Overall, no clinically significant change was indicated in the pulmonary function tests (spirometry, peak expiratory flow, forced oscillation technique). CONCLUSION: Short-term exposure to HVO exhaust concentrations corresponding to EU OELs for one workday did not cause adverse pulmonary function changes in healthy subjects. However, an increase in self-rated mild irritation symptoms, and mild decrease in nasal patency after both HVO exposures, may indicate irritative effects from exposure to HVO exhaust from modern non-road vehicles, with and without aftertreatment systems.

Spirometry profiles among pregnant and non-pregnant African women: a cross-sectional study.

BACKGROUND: Spirometry is a commonly used lung function test. It assesses respiratory functions by measuring the air volume and the rate at which a person can exhale from lungs filled to their total capacity. The most helpful spirometry parameters are: forced vital capacity (FVC), forced expiratory volume in one second (FEV1), and peak expiratory flow (PEF). Pregnancy derives an altered physiological state due to hormonal and anatomical changes that affect the respiratory system. Despite that, spirometry is less commonly done during pregnancy, and if done, test results are evaluated against non-pregnancy references. OBJECTIVE: This study aimed to explore spirometry profiles in pregnant and non-pregnant women and describe their differences. METHODOLOGY: This cross-sectional study involved age-matched pregnant and non-pregnant participants recruited from Mnazi Moja ANC and Muhimbili University (MUHAS). A digital spirometer was used to assess respiratory function. Data were entered and analyzed using SPSS version 23. The mean spirometry values of pregnant participants were compared to those of non-pregnant participants using an independent sample t-test. A p-value of < 0.05 was considered statistically significant. RESULTS: The study included 92 pregnant and 98 non-pregnant participants subjected to spirometry. Both FVC and FEV1 values were significantly lower in pregnant than in non-pregnant participants (2.7 ± 0.5 L vs. 2.9 ± 0.5 L; p < 0.01 and 2.2 ± 0.4 L vs. 2.5 ± 0.4 L; p < 0.01 respectively). In addition, pregnant participants had significantly lower mean PEF values than their non-pregnant counterparts (303 ± 84 L/min versus 353 ± 64 L/min; p < 0.01). CONCLUSION: Spirometry test values are lower in pregnancy than in non-pregnant participants. RECOMMENDATIONS: Interpreting the spirometry test values of pregnant women using references obtained from non-pregnant women may be inappropriate. Future studies should evaluate the appropriateness of predicting spirometry values of pregnant women using reference equations derived from non-pregnant women.

Management of Acute Decompensated Heart Failure in Rural Versus Metropolitan Settings: An Australian Experience.

BACKGROUND: Acute decompensated heart failure (ADHF) is the most common cause of hospital admission in patients over 65, with poorer outcomes demonstrated in rural versus metropolitan areas. The aim of this study was to compare the in-hospital and post-discharge management of ADHF patients admitted to rural versus metropolitan hospitals in Victoria. METHODS: Data from the Victorian Cardiac Outcomes Registry, Heart Failure (VCOR-HF) project was used. This was a prospective, observational, non-randomised study of consecutive patients admitted to participating hospitals in Victoria, Australia, with ADHF as their primary diagnosis over four 30-day periods during consecutive years. All patients were followed up for 30 days post discharge. RESULTS: 1,357 patients (1,260 metropolitan, 97 rural) were admitted to study hospitals with ADHF during the study periods. Cohorts were similar in age (average 76.87±13.12 yrs) and percentage of male gender (56.4% overall). Metropolitan patients were more likely to have diabetes (44.4% vs 34.0%, p=0.046), kidney disease (65.8% vs 37.1%, p<0.01) and anaemia (31.9% vs 19.6%, p=0.01). There was no significant difference in length of stay between metropolitan and rural patients (7.49 vs 6.37 days, p=0.12). There was no significant difference between metropolitan and rural patients in 30-day rehospitalisations (19.1% vs 11.6%, p=0.07, respectively) and all-cause 30-day mortality (8.2% vs 4.1%, p=0.15, respectively). Metropolitan patients were significantly more likely to have seen their general practitioner (GP) (68.1% vs 53.2%, p<0.01) or attend an outpatient clinic (35.9% vs 10.6%, p<0.01) by 30 days. There was no significant difference in number of days to follow-up of any kind between groups. Referrals to a heart failure home visiting program remained low overall (19.9%). CONCLUSION: There was no significant difference in 30-day rehospitalisations or mortality between patients admitted to rural versus metropolitan hospitals. Geographical discrepancies were noted in follow-up by 30 days, with significantly more metropolitan patients having seen a doctor by 30 days post-discharge. Overall follow-up rates remain suboptimal.

Comparison of peak expiratory Flow(PEF) and COPD assessment test (CAT) to assess COPD exacerbation requiring hospitalization: A prospective observational study.

BACKGROUND: Acute exacerbation of chronic obstructive pulmonary disease (COPD) resulting in hospitalization is significantly associated with the increased morbidity and mortality, but there is a lack of an effective method to assess it. This study aimed to compare the ability of peak expiratory flow (PEF) and COPD assessment test (CAT) to assess COPD exacerbations requiring hospitalization. METHODS: A cohort of 110 patients with moderate to severe COPD was studied over a period of 12 months, and their daily morning PEFs and CAT scores were recorded throughout the study. RESULTS: After 12 months of follow-up, 72 patients experienced 156 COPD exacerbations, 74 (47%) that resulted in hospitalization and 82 (53%) that did not result in hospitalization. Change in CAT score from baseline to exacerbation was significantly related to change in PEF and Spearman's rho =0.375 (95% CI, 0.227 to 0.506; p < .001). Change in PEF and CAT score from baseline to hospitalized exacerbation was significantly larger than that from baseline to non-hospitalized exacerbation (p < .05). Multivariable analysis indicated that ΔPEF (OR 1.11, 95% CI 1.06-1.16, p < .001) and ΔCAT (OR 1.64 95% CI 1.18-2.27, p = .003) were independently associated with risk of hospitalized exacerbation. ROC analysis indicated that the optimal cutoff value of ΔPEF for identifying hospitalized exacerbation was 49 L/min (27% from baseline), with a sensitivity and specificity of 82.7% and 76.7% (area under the curve [AUC] = 0.872 (95% CI 0.80-0.944, p < .05). The optimal cutoff value of ΔCAT score for identifying hospitalized exacerbation was 10.5 (63% from baseline), with a sensitivity and specificity of 67.3% and 77.4% [AUC]=0.763 (95% CI 0.67-0.857, p < .05). The AUC of ΔPEF and ΔCAT combined for the identification of hospitalized exacerbation was 0.900 (95% CI 0.841-0.959, p < .05), which was larger than that of ΔCAT or ΔPEF. CONCLUSIONS: ΔPEF and ΔCAT were independently associated with risk of hospitalized exacerbation. Compared with CAT, PEF was superior to identify hospitalized exacerbation. Identification via PEF and CAT combined is more effective than using PEF or CAT alone. These results help to assess the severity of COPD exacerbation and provide valuable information for clinical decision-making.

Pulsed electric field energy calculation to damage red galangal (Alpinia purpurata, K. Scumm) rhizome slices and its essential oil yield and quality with hydrodistillation.

This study aimed to determine the amount of energy to damage the red galangal rhizome sliced cell tissue and the amount and quality of the essential oil obtained by steam-water distillation. This study was a randomized block design, with pulsed electric field (PEF) voltage treatment starting at 1000, 2000, 3000, 4000, and 5000 V and without PEF and repeated three times. The results showed that the voltage between 3000 and 4000 V (E = 120-160 V/cm) or equivalent to 271.5-365.0 kJ/cm3 had damaged the red galangal rhizome slice cell tissue. The increase in yield due to PEF ranged from 13% to 73%, and there was no change in the value of the refractive index and specific gravity, but there was a change in the chemical composition of the essential oil constituents. The benefits of research with PEF treatment are the increase in yield and shorter distillation time.

Starch modification through environmentally friendly alternatives: a review.

Starch is a versatile and a widely used ingredient, with applications in many industries including adhesive and binding, paper making, corrugating, construction, paints and coatings, chemical, pharmaceutical, textiles, oilfield, food and feed. However, native starches present limited applications, which impairs their industrial use. Consequently, starch is commonly modified to achieve desired properties. Chemical treatments are the most exploited to bring new functionalities to starch. However, those treatments can be harmful to the environment and can also bring risks to the human health, limiting their applications. In this scenario, there is a search for techniques that are both environmentally friendly and efficient, bringing new desired functionalities to starches. Therefore, this review presents an up-to-date overview of the available literature data regarding the use of environmentally friendly treatments for starch modification. Among them, we highlighted an innovative chemical treatment (ozone) and different physical treatments, as the modern pulsed electric field (PEF), the emerging ultrasound (US) technology, and two other treatments based on heating (dry heating treatment - DHT, and heat moisture treatment - HMT). It was observed that these environmentally friendly technologies have potential to be used for starch modification, since they create materials with desirable functionalities with the advantage of being categorized as clean label ingredients.

Asthma and rhinitis in Greek furniture workers.

Objective: The detection of asthma and rhinitis in furniture workers exposed to chemicals in the area of Thessaloniki Greece and the determination of the most useful tests for diagnosing the above occupational diseases.Methods: Eighty-three workers (76 men), 35 exposed to chemicals (CW), 23 to wood dust (WW), and 25 office workers (OW), serving as controls, filled in a specialized European Community Respiratory Health Survey (ECRHS) questionnaire for asthma and were submitted to clinical evaluation, spirometry, bronchodilation test, PEF computer algorithm OASYS-2, FeNO, skin prick tests (SPTs), rhinomanometry and methacholine inhalation challenge. Working conditions and protective measurements were also recorded. According to the results of all conducted tests, each subject was distributed to a subgroup: (a) normal, (b) asthma, (c) rhinitis, (d) asthma and rhinitis. Comparisons were performed among work groups.Results: The presence of asthma and/or rhinitis was higher among CW and WW compared to OW (p = 0.004). Significant differences among groups were observed in the questions «better weekend¼ (p < 0.034) and "improvement on vacation¼ (p < 0.000), in OASYS-2 Score (p < 0.000), in ABC Score (p < 0.000), and in methacholine score (p < 0.022). Rhinomanometry, FeNO, spirometry, and spirometry after bronchodilation had no significant differences among groups. Working conditions, ventilation system, work practice, use and type of mask revealed no significant differences.Conclusion: Asthma and rhinitis are significantly common among CW. Protective measurements used were not adequate to prevent asthma and or work related rhinitis. Early diagnosis might contribute to disease prevention and control.

The effect of acute outdoor air pollution on peak expiratory flow in individuals with asthma: A systematic review and meta-analysis.

OBJECTIVES: Acute exposures to outdoor air pollution have been shown to reduce lung function in children with asthma, but the effect on adults with asthma has not been established in a meta-analysis. The objective of this study was to conduct a systematic literature review and meta-analysis of studies that assessed the relationship of outdoor air pollution and peak expiratory flow (PEF) in adults with asthma. METHODS: Studies that contained data on outdoor air pollution levels (PM10, PM2.5, or NO2) and PEF in adults with asthma were eligible for inclusion. Effect estimates were quantified for each air pollution measure using random effects models. Heterogeneity was investigated with the Q-test and I2 statistics. Meta-regression and subgroup analyses were conducted to determine differences in effect by air pollution measures and the inclusion of smokers. RESULTS: A total of 22 effect estimates from 15 studies were included in this review. A 10 µg/m3 increase in acute PM10 exposure was associated with a -0.19 L/min (95% CI: 0.30, -0.09) change in PEF. For both PM10 and PM2.5, the inclusion of current smokers was a significant source of heterogeneity among studies (meta-regression: p = 0.04 and p = 0.03). Among studies that only included non-smokers, a 10 µg/m3 increase in acute exposure to PM10 and PM2.5 was associated with changes in PEF of -0.25 L/min (95% CI: 0.38, -0.13) and -1.02 L/min (95% CI: 1.79, -0.24), respectively. CONCLUSIONS: This study provides evidence that acute increases in PM10 and PM2.5 levels are associated with decreases in PEF in adults with asthma, particularly among non-smokers.

Accelerated Solvent Extraction and Pulsed Electric Fields for Valorization of Rainbow Trout (Oncorhynchus mykiss) and Sole (Dover sole) By-Products: Protein Content, Molecular Weight Distribution and Antioxidant Potential of the Extracts.

Fishery by-products are rich in biologically active substances and the use of green and efficient extraction methods to recover these high-added-value compounds is of particular importance. In this study, head, skin and viscera of rainbow trout and sole were used as the target matrices and accelerated solvent extraction (ASE) (45-55 °C, 15 min, pH 5.2-6.8, 103.4 bars) and pulsed electric fields (PEF) (1-3 kV/cm, 123-300 kJ/kg, 15-24 h) were applied as extraction technologies. The results showed that ASE and PEF significantly increased the protein extract efficiency of the fish by-products (p < 0.05) by up to 80%. SDS-PAGE results showed that ASE and PEF treatments changed the molecular size distribution of the protein in the extracts, which was specifically expressed as the change in the area or number of bands between 5 and 250 kDa. The antioxidant capacity of the extracts was evaluated by oxygen radical absorbance capacity (ORAC) and total antioxidant capacity (ABTS) assays. The results showed that both ASE and PEF treatments significantly increased the antioxidant capacity of rainbow trout and sole skin and head extracts (p < 0.05). ASE and PEF extraction processes can be used as new technologies to extract high-added-value compounds from fish by-products.

Exploring the Potential of Icelandic Seaweeds Extracts Produced by Aqueous Pulsed Electric Fields-Assisted Extraction for Cosmetic Applications.

A growing concern for overall health is driving a global market of natural ingredients not only in the food industry but also in the cosmetic field. In this study, a screening on potential cosmetic applications of aqueous extracts from three Icelandic seaweeds produced by pulsed electric fields (PEF) was performed. Produced extracts by PEF from Ulva lactuca, Alaria esculenta and Palmaria palmata were compared with the traditional hot water extraction in terms of polyphenol, flavonoid and carbohydrate content. Moreover, antioxidant properties and enzymatic inhibitory activities were evaluated by using in vitro assays. PEF exhibited similar results to the traditional method, showing several advantages such as its non-thermal nature and shorter extraction time. Amongst the three Icelandic species, Alaria esculenta showed the highest content of phenolic (mean value 8869.7 µg GAE/g dw) and flavonoid (mean value 12,098.7 µg QE/g dw) compounds, also exhibiting the highest antioxidant capacities. Moreover, Alaria esculenta extracts exhibited excellent anti-enzymatic activities (76.9, 72.8, 93.0 and 100% for collagenase, elastase, tyrosinase and hyaluronidase, respectively) for their use in skin whitening and anti-aging products. Thus, our preliminary study suggests that Icelandic Alaria esculenta-based extracts produced by PEF could be used as potential ingredients for natural cosmetic and cosmeceutical formulations.

The Use of Iron-Enriched Yeast for the Production of Flatbread.

The most common cause of iron deficiency is an improperly balanced diet, in which the body's need for iron cannot be met by absorption of this element from food. Targeted iron supplementation and food fortification may be the main treatments for iron deficiency in the population. However, many iron-rich supplements and foods have low bioavailability of this element. In our study, we used yeast enriched with iron ions to produce flatbread. The yeast cells accumulated iron ions from the medium supplemented with Fe(NO3)3·9H2O, additionally one of the cultures was treated with pulsed electric field in order to increase the accumulation. The potential bioavailability of iron from flatbread containing 385.8 ± 4.12 mg of iron in 100 g dry mass was 10.83 ± 0.94%. All the flatbreads had a moderate glycemic index. There were no significant differences in antioxidant activity against DPPH• between flatbread with iron-enriched and non-iron-enriched yeast. Sensory evaluation showed that this product is acceptable to consumers since no metallic aftertaste was detected. Iron enriched flatbread can potentially be an alternative to dietary supplements in iron deficiency states.