Photoreforming of Microplastics: Challenges and Opportunities for Sustainable Environmental Remediation.

Plastics are widely used in daily lives, but unfortunately, their inadequate recycling practices have led to the accumulation of microplastics in the environment, posing a threat to public health. The existing methods for treating microplastics are energy-intensive and environmentally damaging. In this context, photoreforming has emerged as a sustainable solution to address the microplastic crisis by simultaneously recycling them into value-added chemicals. This review presents a comprehensive overview of the application of photoreforming for upcycling microplastic. The underlying mechanisms of photoreforming reaction are discussed, followed by the exploration of recent advancements and innovative strategies in photoreforming techniques with particular emphasis on their real-world applications and potential for large-scale implementation. Also, critical factors influencing the efficiency of microplastic photoreforming are identified, providing guidance for further research and optimization.

Photocatalytic Upgrading of Polylactic Acid Waste into Alanine under Mild Conditions.

Polylactic acid (PLA) has attracted increasing interest as a sustainable plastic because it can be degraded into CO2 and H2O in nature. However, this process is sluggish, and even worse, it is a CO2-emitting and carbon resource waste process. Therefore, it is highly urgent to develop a novel strategy for recycling post-consumer PLA to achieve a circular plastic economy. Herein, we report a one-pot photoreforming route for the efficient and selective amination of PLA waste into value-added alanine using CoP/CdS catalysts under mild conditions. Results show the alanine production rate can reach up to 2.4 mmol gcat -1 h-1, with a high selectivity (>75 %) and excellent stability. Time-resolved transient absorption spectra (TAS) reveal that CoP can rapidly extract photogenerated electrons from CdS to accelerate proton reduction, favoring hole-dominated PLA oxidation to coproduce alanine. This study offers an appealing way for upcycling PLA waste and creates new opportunities for green synthesis of amino acids.

From Plastic Waste to Green Hydrogen and Valuable Chemicals Using Sunlight and Water.

Over 79 % of 6.3 billion tonnes of plastics produced from 1950 to 2015 have been disposed in landfills or found their way to the oceans, where they will reside for up to hundreds of years before being decomposed bringing upon significant dangers to our health and ecosystems. Plastic photoreforming offers an appealing alternative by using solar energy and water to transform plastic waste into value-added chemical commodities, while simultaneously producing green hydrogen via the hydrogen evolution reaction. This review aims to provide an overview of the underlying principles of emerging plastic photoreforming technologies, highlight the challenges associated with experimental protocols and performance assessments, discuss recent global breakthroughs on the photoreforming of plastics, and propose perspectives for future research. A critical assessment of current plastic photoreforming studies shows a lack of standardised conditions, hindering comparison amongst photocatalyst performance. Guidelines to establish a more accurate evaluation of materials and systems are proposed, with the aim to facilitate the translation of promising fundamental discovery in photocatalysts design.

Selective Photoreforming of Waste Plastics into Diesel Olefins via Single Reactive Oxygen Species.

The accumulation of plastic waste poses a pressing environmental challenge. Catalytic conversion stands out as an ideal approach for plastics upcycling, particularly through solar-driven plastics photoreforming. However, due to the common effects of multiple reactive oxygen species (ROS), selectively generating high-value chemicals becomes challenging. In this study, we developed a universal strategy to achieve >85 % selective production of diesel olefins (C15-C28) from polyolefin waste plastics via single ROS. Using tetrakis (4-carboxyphenyl) porphyrin supramolecular (TCPP) with different central metals as an example to regulate single ROS generation, results show Ni-TCPP facilitates triplet exciton production, yielding 1O2, while Zn-TCPP generates ⋅O2 - due to its strong built-in electric field (IEF). 1O2 directly dechlorinates polyvinyl chloride (PVC) due to the electro-negativity of chlorine atoms and the low dissociation energy of C-Cl bonds, while ⋅O2 - promotes direct dehydrogenation of polyethylene (PE) due to the electro-positivity of hydrogen atoms and the high dissociation energy of C-H bonds. This method is universally applicable to various single ROS systems. Installation experiments further affirm the application potential, achieving the highest diesel olefin production of 76.1 µmol h-1. Such a universally adaptive approach holds promise for addressing the global plastic pollution problem.

Direct Polyethylene Photoreforming into Exclusive Liquid Fuel over Charge-Asymmetrical Dual Sites under Mild Conditions.

Direct polyethylene photoreforming to high-energy-density C2 fuels under mild conditions is of great significance and still faces a huge challenge, which is partly attributed to the extreme instability of *CH2CH2 adsorbed on the traditional catalysts with single catalytic sites. Herein, charge-asymmetrical dual sites are designed to boost the adsorption of *CH2CH2 for direct polyethylene photoreforming into C2 fuels under normal temperature and pressure. As a prototype, the synthetic Zr-doped CoFe2O4 quantum dots with charge-asymmetrical dual metal sites realize direct polyethylene photoreforming into acetic acid, with 100% selectivity of liquid fuel and the evolution rate of 1.10 mmol g-1 h-1, outperforming those of most previously reported photocatalysts under similar conditions. In situ X-ray photoelectron spectra, density-functional-theory calculations, and control experiments reveal the charge-asymmetrical Zr-Fe dual sites may act as the predominate catalytic sites, which can simultaneously bond with the *CH2CH2 intermediates for the following stepwise oxidation to form C2 products.

Photoredox Cascade Catalyst for Efficient Hydrogen Production with Biomass Photoreforming.

Biomass photoreforming is a promising method to provide both a clean energy resource in the form of hydrogen (H2 ) and valuable chemicals as the results of water reduction and biomass oxidation. To overcome the poor contact between heterogeneous photocatalysts and biomass substrates, we fabricated a new photoredox cascade catalyst by combining a homogeneous catalyst, 2,2,6,6-tetramethylpiperidine 1-oxyl (TEMPO), and a heterogeneous dual-dye sensitized photocatalyst (DDSP) composed of two Ru(II)-polypyridine photosensitizers (RuP6 and RuCP6 ) and Pt-loaded TiO2 nanoparticles. During blue-light irradiation (λ=460±15 nm; 80 mW), the DDSP photocatalytically reduced aqueous protons to form H2 and simultaneously oxidized TEMPO• radicals to generate catalytically active TEMPO+ . It oxidized biomass substrates (water-soluble glycerol and insoluble cellulose) to regenerate TEMPO• . In the presence of N-methyl imidazole as a proton transfer mediator, the photocatalytic H2 production activities for glycerol and cellulose reforming reached 2670 and 1590 µmol H2 (gTiO2 )-1  h-1 , respectively, which were comparable to those of state-of-the-art heterogeneous photocatalysts.

Improved carrier dynamics in nickel/urea-functionalized carbon nitride for ethanol photoreforming.

Photoreforming has been shown to accelerate the H2 evolution rate compared to water splitting due to thermodynamically favorable organic oxidation. In addition, the potential to simultaneously produce solar fuel and value-added chemicals is a significant benefit of photoreforming. To achieve an efficient and economically viable photoreforming process, the selection and design of an appropriate photocatalyst is essential. Carbon nitride is promising as a metal-free photocatalyst with visible light activity, high stability, and low fabrication cost. However, it typically exhibits poor photogenerated charge carrier dynamics, thereby resulting in low photocatalytic performance. Herein, we demonstrate improved carrier dynamics in urea-functionalized carbon nitride with in situ photodeposited Ni cocatalyst (Ni/Urea-CN) for ethanol photoreforming. In the presence of 1 mM Ni2+ precursor, an H2 evolution rate of 760.5 µmol h-1 g-1 and an acetaldehyde production rate of 888.2 µmol h-1 g-1 were obtained for Ni/Urea-CN. The enhanced activity is ascribed to the significantly improved carrier dynamics in Urea-CN. The ability of oxygen moieties in the urea group to attract electrons and to increase the hole mobility via a positive shift in the valence band promotes an improvement in the overall carrier dynamics. In addition, high crystallinity and specific surface area of the Urea-CN contributed to accelerating charge separation and transfer. As a result, the electrons were efficiently transferred from Urea-CN to the Ni cocatalyst for H2 evolution while the holes were consumed during ethanol oxidation. The work demonstrates a means by which carrier dynamics can be tuned by engineering carbon nitride via edge functionalization.

Solar Reforming of Biomass with Homogeneous Carbon Dots.

A sunlight-powered process is reported that employs carbon dots (CDs) as light absorbers for the conversion of lignocellulose into sustainable H2 fuel and organics. This photocatalytic system operates in pure and untreated sea water at benign pH (2-8) and ambient temperature and pressure. The CDs can be produced in a scalable synthesis directly from biomass itself and their solubility allows for good interactions with the insoluble biomass substrates. They also display excellent photophysical properties with a high fraction of long-lived charge carriers and the availability of a reductive and an oxidative quenching pathway. The presented CD-based biomass photoconversion system opens new avenues for sustainable, practical, and renewable fuel production through biomass valorization.

Engineering titania nanostructure to tune and improve its photocatalytic activity.

Photocatalytic pathways could prove crucial to the sustainable production of fuels and chemicals required for a carbon-neutral society. Electron-hole recombination is a critical problem that has, so far, limited the efficiency of the most promising photocatalytic materials. Here, we show the efficacy of anisotropy in improving charge separation and thereby boosting the activity of a titania (TiO2) photocatalytic system. Specifically, we show that H2 production in uniform, one-dimensional brookite titania nanorods is highly enhanced by engineering their length. By using complimentary characterization techniques to separately probe excited electrons and holes, we link the high observed reaction rates to the anisotropic structure, which favors efficient carrier utilization. Quantum yield values for hydrogen production from ethanol, glycerol, and glucose as high as 65%, 35%, and 6%, respectively, demonstrate the promise and generality of this approach for improving the photoactivity of semiconducting nanostructures for a wide range of reacting systems.

Engineering Localized Surface Plasmon Interactions in Gold by Silicon Nanowire for Enhanced Heating and Photocatalysis.

The field of plasmonics has attracted considerable attention in recent years because of potential applications in various fields such as nanophotonics, photovoltaics, energy conversion, catalysis, and therapeutics. It is becoming increasing clear that intrinsic high losses associated with plasmons can be utilized to create new device concepts to harvest the generated heat. It is therefore important to design cavities, which can harvest optical excitations efficiently to generate heat. We report a highly engineered nanowire cavity, which utilizes a high dielectric silicon core with a thin plasmonic film (Au) to create an effective metallic cavity to strongly confine light, which when coupled with localized surface plasmons in the nanoparticles of the thin metal film produces exceptionally high temperatures upon laser irradiation. Raman spectroscopy of the silicon core enables precise measurements of the cavity temperature, which can reach values as high as 1000 K. The same Si-Au cavity with enhanced plasmonic activity when coupled with TiO2 nanorods increases the hydrogen production rate by ∼40% compared to similar Au-TiO2 system without Si core, in ethanol photoreforming reactions. These highly engineered thermoplasmonic devices, which integrate three different cavity concepts (high refractive index core, metallo-dielectric cavity, and localized surface plasmons) along with the ease of fabrication demonstrate a possible pathway for designing optimized plasmonic devices with applications in energy conversion and catalysis.

Solar Hydrogen Generation from Lignocellulose.

Photocatalytic reforming of lignocellulosic biomass is an emerging approach to produce renewable H2 . This process combines photo-oxidation of aqueous biomass with photocatalytic hydrogen evolution at ambient temperature and pressure. Biomass conversion is less energy demanding than water splitting and generates high-purity H2 without O2 production. Direct photoreforming of raw, unprocessed biomass has the potential to provide affordable and clean energy from locally sourced materials and waste.

Enhancing Hydrogen Production from the Photoreforming of Lignin.

Photoreforming of lignocellulose biomass is widely recognised as a challenging but key technology for producing value-added chemicals and renewable hydrogen (H2 ). In this study, H2 production from photoreforming of organosolv lignin in a neutral aqueous solution was studied over a 0.1 wt % Pt/TiO2 (P25) catalyst with ultraviolet A (UVA) light. The H2 production from the system employing the lignin (~4.8 µmol gcat -1 h-1 ) was comparable to that using hydroxylated/methoxylated aromatic model compounds (i. e., guaiacol and phenol, 4.8-6.6 µmol gcat -1 h-1 ), being significantly lower than that from photoreforming of cellulose (~62.8 µmol gcat -1 h-1 ). Photoreforming of phenol and reaction intermediates catechol, hydroquinone and benzoquinone were studied to probe the mechanism of phenol oxidation under anaerobic photoreforming conditions with strong adsorption and electron transfer reactions lowering H2 production from the intermediates relative to that from phenol. The issues associated with catalyst poisoning and low photoreforming activity of lignins demonstrated in this paper have been mitigated by implementing a process by which the catalyst was cycled through anaerobic and aerobic conditions. This strategy enabled the periodic regeneration of the photocatalyst resulting in a threefold enhancement in H2 production from the photoreforming of lignin.

Understanding Structure-Activity Relationship in Pt-loaded g-C3 N4 for Efficient Solar- Photoreforming of Polyethylene Terephthalate Plastic and Hydrogen Production.

Coupling the hydrogen evolution reaction with plastic waste photoreforming provides a synergistic path for simultaneous production of green hydrogen and recycling of post-consumer products, two major enablers for establishment of a circular economy. Graphitic carbon nitride (g-C3 N4 ) is a promising photocatalyst due to its suitable optoelectronic and physicochemical properties, and inexpensive fabrication. Herein, a mechanistic investigation of the structure-activity relationship of g-C3 N4 for poly(ethylene terephthalate) (PET) photoreforming is reported by carefully controlling its fabrication from a subset of earth-abundant precursors, such as dicyandiamide, melamine, urea, and thiourea. These findings reveal that melamine-derived g-C3 N4 with 3 wt.% Pt has significantly higher performance than alternative derivations, achieving a maximum hydrogen evolution rate of 7.33 mmolH2  gcat -1  h-1 , and simultaneously photoconverting PET into valuable organic products including formate, glyoxal, and acetate, with excellent stability for over 30 h of continuous production. This is attributed to the higher crystallinity and associated chemical resistance of melamine-derived g-C3 N4 , playing a major role in stabilization of its morphology and surface properties. These new insights on the role of precursors and structural properties in dictating the photoactivity of g-C3 N4 set the foundation for the further development of photocatalytic processes for combined green hydrogen production and plastic waste reforming.

Induced-aggregates in photocatalysis: An unexplored approach to reduce the noble metal co-catalyst content.

Photocatalysis has emerged as a promising and environmentally sustainable solution to produce high-purity hydrogen through ethanol photoreforming. It is commonly accepted that adding co-catalysts, especially noble metals, significantly enhances the catalytic activity of semiconductors. However, the high cost of noble metals such as Pt may limit the real application of this emerging technology. Here we evaluate the possibility of reducing the noble metal loading by creating the appropriate interface between pre-formed semiconductor nanoparticles. Commercial titania (P25) was selected as the semiconductor due to its commercial availability, facilitating the straightforward validation and corroboration of our results. Pt was selected as co-catalyst because one of the most efficient photocatalysts for the ethanol photo-reforming is still based on the use of P25 in combination with Pt. We report that the creation of induced aggregates dramatically improves the total hydrogen produced when very low loadings (≤0.05 wt%) of Pt are used. We have developed a pioneering reactor designed for conducting photoluminescence studies under authentic operational conditions of nanoparticle suspensions in the liquid phase. This approach allows us to obtain the average photoluminescence emission from the P25 agglomerates what it would be impossible to obtain by using standard solid samples holders. Thanks to this equipment, we can conclude that this remarkable improvement of the activity is mainly due to creation of an interface that favors the charge transfer between the particles of the aggregates. According to this, the titania nanoparticles of the agglomerates act as an antenna to collect the photons of the sun-light and produce the photo-excited electrons that will be transferred to the platinum nanoparticles located in the same agglomeration. In contrast, raw P25 with low loadings of Pt would have a high number of titania nanoparticles without platinum, and therefore, inactive. This result would be especially relevant in the case of immobilized photocatalytic systems for real future photocatalytic reactors because the immobilization of the semiconductors would generate similar interactions to the one created by our method. Consequently, the initial semiconductor immobilization followed by the subsequent photo-deposition of the co-catalyst emerges as a promising approach for a substantial reduction of the co-catalyst content.

Pt-TiO2 Systems for Enhanced Hydrogen Production from Glycerol: Direct vs Sequential Incorporation Through Photodeposition.

Pt-TiO2 systems are the most widely used photocatalysts in the production of green hydrogen from glycerol photoreforming. To incorporate metals on the surface of materials, photodeposition is the most used method because it employs mild conditions. However, despite its use, there are some parameters that have not been deeply studied, such as the appropriate metal loading and the method itself, to obtain a better dispersion of Pt. In this work, six Pt-TiO2 catalysts were synthesized by a classical photodeposition method employing UV radiation. The studied Pt wt.% range was 0.15-0.60 wt.%, being incorporated in one step or in subsequent ones. HRTEM analyses showed that both methods allowed a homogeneous distribution of Pt, and in both, the particle size was around 2.3-3.6 nm, increasing with metal loading. The photocatalytic activity of materials was tested in glycerol photoreforming under UV radiation, and the 0.45 wt.% Pt-containing solid that had been synthesized in one step was the one that allowed the highest hydrogen production. This might suggest that around 0.40% is the appropriate metal loading for hydrogen production under these conditions and that incorporating the desired metal percentage in one step is the most efficient method in terms of energy and time savings.

Upcycle polyethylene terephthalate waste by photoreforming: Bifunction of Pt cocatalyst.

Upcycle polyethylene terephthalate (PET) waste by photoreforming (PR) is a sustainable and green approach to tackle environmental problems but with challenges to obtain valuable oxidation products and high purity hydrogen simultaneously. Noble metal cocatalysts are essential to enhance the overall PR reaction efficacy. In this work, TiO2 nanotubes (TiO2 NTs) decorated with single Pt atoms (Pt1/TiO2) or Pt nanoparticles (PtNPs/TiO2) are used in the photoreforming reaction (in one batch), and the oxidation products from ethylene glycol (EG, hydrolysed product of PET) in liquid phase and hydrogen are detected. With Pt1/TiO2, EG is oxidized to glyoxal, glyoxylate or lactate, and hydrogen evolution rate (r H2) reaches 51.8 µmol⋅h-1⋅gcat-1, that is 30 times higher than that of TiO2. For PtNPs/TiO2 (size of Pt NPs: 1.97 nm), hydrogen evolution reaches 219.1 µmol⋅h-1⋅gcat-1, but with the oxidation product of acetate only. DFT calculation demonstrates that for Pt NPs, the reaction path for hydrogen evolution is preferred thermodynamically, due to the formation of Schottky junction. On the oxidation of EG, theoretical and spectroscopic analysis suggest that bidentate adsorption of EG at the interface is facile on Pt1/TiO2, compared to that on PtNPs/TiO2 (two Pt sites), but oxidation products, adsorb less strongly, compared to PtNPs/TiO2, that eventually regulates the distribution of oxidation products. The results thus demonstrate the bifunctions of Pt in the PR reaction, i.e., electron transfer mediator for hydrogen evolution and reactive sites for molecules adsorption. The oxidation reaction is dominated by the adsorption-desorption behavior of molecules but the reduction reaction is controlled by the electron transfer. In addition, acidification of pretreated PET alkaline solution achieves separation of pure terephthalic acid (PTA), which further improves the reaction efficiency possibly by offering high density of active sites and acidic environment. Our work thus demonstrates that to upcycle PET plastics, an optimized process can be reached by atomic design of photocatalysts and proper treatment on the plastic wastes.

CeO2-rGO Composites for Photocatalytic H2 Evolution by Glycerol Photoreforming.

The interaction between CeO2-GO or CeO2-rGO and gold as co-catalysts were here investigated for solar H2 production by photoreforming of glycerol. The materials were prepared by a solar photoreduction/deposition method, where in addition to the activation of CeO2 the excited electrons were able to reduce the gold precursor to metallic gold and the GO into rGO. The presence of gold was fundamental to boost the H2 production, whereas the GO or the rGO extended the visible-light activity of cerium oxide (as confirmed by UV-DRS). Furthermore, the strong interaction between CeO2 and Au (verified by XPS and TEM) led to good stability of the CeO2-rGO-Au sample with the evolved H2 that increased during five consecutive runs of glycerol photoreforming. This catalytic behaviour was ascribed to the progressive reduction of GO into rGO, as shown by Raman measurements of the photocatalytic runs. The good charge carrier separation obtained with the CeO2-rGO-Au system allowed the simultaneous production of H2 and reduction of GO in the course of the photoreforming reaction. These peculiar features exhibited by these unconventional photocatalysts are promising to propose new solar-light-driven photocatalysts for green hydrogen production.

An Integrated Plasma-Photocatalytic System for Upcycling of Polyolefin Plastics.

Nondegradable polyolefin plastics, which account for >60 % of total plastic waste, trigger severe global concerns and thus demand effective management technologies. However, owing to the chemical inertness of non-polar C-C backbones in the polyolefin structure, efficient upcycling of polyolefin plastics under ambient conditions remains a great challenge. This study introduces an integrated plasma-photocatalytic technology, coupling plasma treatment with solar-driven reforming under mild conditions, for the efficient upcycling of polyolefin plastics into value-added hydrogen and gaseous fuels. The first plasma step grafts oxygenated groups, such as -OH, O-C=O, and C=O, onto the polyolefin chains, which leads to the formation of a polar and hydrophilic polymer that facilitates the subsequent reforming in the photocatalytic step. Therefore, high hydrogen production activity with a benchmark efficiency of >100 µmol g-1 h-1 was achieved. Moreover, the integrated process also demonstrates high versatility in upcycling different polyolefin plastics including polyethylene, polypropylene and polyvinyl chloride. The findings provide a new avenue for plastic upcycling in an efficient and sustainable way.

Facile H2PdCl4-induced photoreforming of insoluble PET waste for C1-C3 compound production.

Plastic pollution has emerged as a pressing global concern, driven by the extensive production and consumption of plastic, resulting in over 8 billion tons of plastic waste generated to date. Conventional disposal methods have proven inadequate in effectively managing polymer waste, necessitating the exploration of novel techniques. Previous research has demonstrated the successful application of photoreforming (PR) in converting water-soluble oligomer fragments of plastics into valuable chemicals. However, an unresolved challenge remains in dealing with the insoluble oligomer fragments characterized by complex chemical structures and larger molecular sizes. In this study, we propose a facile approach that involves H2PdCl4-induced activation on PET substrate for PR of PET bottles. Remarkably, this method enables the production of C1-C3 compounds without the reliance on sacrificial reagents or photocatalysts. The significant findings of this study offer a practical solution to address the most formidable aspect of plastic PR, specifically targeting the insoluble oligomer fragments. Moreover, this research contributes to the advancement of effective strategies for the sustainable management of plastic waste.

Mini-review on remediation of plastic pollution through photoreforming: progress, possibilities, and challenges.

The increasing plastic pollution has raised significant concerns about the environment and the destruction of its precious resources. Making value-added products out of plastic waste is an effective way to reduce plastic pollution and use it as a valuable resource. Plastic reforming driven by sunlight offers a quick and low-energy way to produce hydrogen from waste. Photoreforming of plastic waste is an emerging technology that cannot only break down plastic polymer waste into value-added chemicals but also produce solar fuel cell quality H2. Technologies, such as pyrolysis, combustion, and advanced oxidation, are right now being studied for converting plastic pollution into energy. A thorough summary and comparison of different technologies have not yet been published. Open dumping and combustion are two main steps to deal with waste plastics, but these processes experience inefficiencies and cannot adequately address the challenges. In this mini-review, we aimed to provide a short overview of the recently reported conventional and novel plastic waste treatment methods. The current research on the photoreforming of plastics conducted by various groups and some advantages and disadvantages of this practice has been discussed thoroughly. Also, some notes were made on the prospective future scope present in this particular research area to achieve a carbon-free fuel system. The purpose of this review is to encourage the utilisation of plastic garbage as an alternative source of energy.