Ratiometric gibberellin biosensors for the analysis of signaling dynamics and metabolism in plant protoplasts.

Gibberellins (GAs) are major regulators of developmental and growth processes in plants. Using the degradation-based signaling mechanism of GAs, we have built transcriptional regulator (DELLA)-based, genetically encoded ratiometric biosensors as proxies for hormone quantification at high temporal resolution and sensitivity that allow dynamic, rapid and simple analysis in a plant cell system, i.e. Arabidopsis protoplasts. These ratiometric biosensors incorporate a DELLA protein as a degradation target fused to a firefly luciferase connected via a 2A peptide to a renilla luciferase as a co-expressed normalization element. We have implemented these biosensors for all five Arabidopsis DELLA proteins, GA-INSENSITIVE, GAI; REPRESSOR-of-ga1-3, RGA; RGA-like1, RGL1; RGL2 and RGL3, by applying a modular design. The sensors are highly sensitive (in the low pm range), specific and dynamic. As a proof of concept, we have tested the applicability in three domains: the study of substrate specificity and activity of putative GA-oxidases, the characterization of GA transporters, and the use as a discrimination platform coupled to a GA agonists' chemical screening. This work demonstrates the development of a genetically encoded quantitative biosensor complementary to existing tools that allow the visualization of GA in planta.

DNA Delivery by Virus-Like Nanocarriers in Plant Cells.

Tobacco mild green mosaic virus (TMGMV)-like nanocarriers were designed for gene delivery to plant cells. High aspect ratio TMGMVs were coated with a polycationic biopolymer, poly(allylamine) hydrochloride (PAH), to generate highly charged nanomaterials (TMGMV-PAH; 56.20 ± 4.7 mV) that efficiently load (1:6 TMGMV:DNA mass ratio) and deliver single-stranded and plasmid DNA to plant cells. The TMGMV-PAH were taken up through energy-independent mechanisms in Arabidopsis protoplasts. TMGMV-PAH delivered a plasmid DNA encoding a green fluorescent protein (GFP) to the protoplast nucleus (70% viability), as evidenced by GFP expression using confocal microscopy and Western blot analysis. TMGMV-PAH were inactivated (iTMGMV-PAH) using UV cross-linking to prevent systemic infection in intact plants. Inactivated iTMGMV-PAH-mediated pDNA delivery and gene expression of GFP in vivo was determined using confocal microscopy and RT-qPCR. Virus-like nanocarrier-mediated gene delivery can act as a facile and biocompatible tool for advancing genetic engineering in plants.

The leaf idioblastome of the medicinal plant Catharanthus roseus is associated with stress resistance and alkaloid metabolism.

Catharanthus roseus leaves produce a range of monoterpenoid indole alkaloids (MIAs) that include low levels of the anticancer drugs vinblastine and vincristine. The MIA pathway displays a complex architecture spanning different subcellular and cell type localizations, and is under complex regulation. As a result, the development of strategies to increase the levels of the anticancer MIAs has remained elusive. The pathway involves mesophyll specialized idioblasts where the late unsolved biosynthetic steps are thought to occur. Here, protoplasts of C. roseus leaf idioblasts were isolated by fluorescence-activated cell sorting, and their differential alkaloid and transcriptomic profiles were characterized. This involved the assembly of an improved C. roseus transcriptome from short- and long-read data, IDIO+. It was observed that C. roseus mesophyll idioblasts possess a distinctive transcriptomic profile associated with protection against biotic and abiotic stresses, and indicative that this cell type is a carbon sink, in contrast to surrounding mesophyll cells. Moreover, it is shown that idioblasts are a hotspot of alkaloid accumulation, suggesting that their transcriptome may hold the key to the in-depth understanding of the MIA pathway and the success of strategies leading to higher levels of the anticancer drugs.

A high-efficient protoplast transient system for screening gene editing elements in Salvia miltiorrhiza.

KEY MESSAGE: A high-efficiency protoplast transient system was devised to screen genome editing elements in Salvia miltiorrhiza. Medicinal plants with high-value pharmaceutical ingredients have attracted research attention due to their beneficial effects on human health. Cell wall-free protoplasts of plants can be used to evaluate the efficiency of genome editing mutagenesis. The capabilities of gene editing in medicinal plants remain to be fully explored owing to their complex genetic background and shortfall of suitable transformation. Here, we took the Salvia miltiorrhiza as a representative example for developing a method to screen favorable gene editing elements with high editing efficiency in medical plants by a PEG-mediated protoplast transformation. Results indicated that using the endogenous SmU6.1 of S. miltiorrhiza to drive sgRNA and the plant codon-optimized Cas9 driven by the promoter SlEF1α can enhance the efficiency of editing. In summary, we uncover an efficacious transient method for screening editing elements and shed new light on increasing gene editing efficiency in medicinal plants.

Development of PEG-mediated genetic transformation and gene editing system of Bryum argenteum as an abiotic stress tolerance model plant.

KEY MESSAGE: To establish a sterile culture system and protoplast regeneration system for Bryum argenteum, and to establish and apply CRISPR/Cas9 system in Bryum argenteum. Bryum argenteum is a fascinating, cosmopolitan, and versatile moss species that thrives in various disturbed environments. Because of its comprehensive tolerance to the desiccation, high UV and extreme temperatures, it is emerging as a model moss for studying the molecular mechanisms underlying plant responses to abiotic stresses. However, the lack of basic tools such as gene transformation and targeted genome modification has hindered the understanding of the molecular mechanisms underlying the survival of B. argenteum in different environments. Here, we reported the protonema of B. argenteum can survive up to 95.4% water loss. In addition, the genome size of B. argenteum is approximately 313 Mb by kmer analysis, which is smaller than the previously reported 700 Mb. We also developed a simple method for protonema induction and an efficient protoplast isolation and regeneration protocol for B. argenteum. Furthermore, we established a PEG-mediated protoplast transient transfection and stable transformation system for B. argenteum. Two homologues of ABI3(ABA-INSENSITIVE 3) gene were successfully cloned from B. argenteum. To further investigate the function of the ABI3 gene in B. argenteum, we used the CRISPR/Cas9 genetic editing system to target the BaABI3A and BaABI3B gene in B. argenteum protoplasts. This resulted in mutagenesis at the target in about 2-5% of the regenerated plants. The isolated abi3a and abi3b mutants exhibited increased sensitivity to desiccation, suggesting that BaABI3A and BaABI3B play redundant roles in desiccation stress. Overall, our results provide a rapid and simple approach for molecular genetics in B. argenteum. This study contributes to a better understanding of the molecular mechanisms of plant adaptation to extreme environmental.

Development of a Whole-Cell System Based on the Use of Genetically Modified Protoplasts to Detect Nickel Ions in Food Matrices.

Heavy metals are dangerous contaminants that constitute a threat to human health because they persist in soils and are easily transferred into the food chain, causing damage to human health. Among heavy metals, nickel appears to be one of the most dangerous, being responsible for different disorders. Public health protection requires nickel detection in the environment and food chains. Biosensors represent simple, rapid, and sensitive methods for detecting nickel contamination. In this paper, we report on the setting up a whole-cell-based system, in which protoplasts, obtained from Nicotiana tabacum leaves, were used as transducers to detect the presence of heavy metal ions and, in particular, nickel ions. Protoplasts were genetically modified with a plasmid containing the Green Fluorescent Protein reporter gene (GFP) under control of the promoter region of a sunflower gene coding for a small Heat Shock Protein (HSP). Using this device, the presence of heavy metal ions was detected. Thus, the possibility of using this whole-cell system as a novel tool to detect the presence of nickel ions in food matrices was assessed.

Improving the regeneration rate of deep lethal mutant protoplasts by fusion to promote efficient L-lysine fermentation.

BACKGROUND: L-lysine is widely used for feed and special diet products. The transformation of fermentation strains plays a decisive role in the development of these industries. Based on the mutation breeding theory and metabolic engineering methods, this study aimed to improve the regeneration rate of high-lethality protoplasts by combining multiple mutagenesis and homologous cell fusion techniques to efficiently concentrate multiple dominant mutations and optimize the L-lysine production strain Escherichia coli QDW. RESULTS: In order to obtain the best protoplasts, the optimal enzymolysis time was selected as 4 h. The optimal lysozyme concentration was estimated at 0.8 mg/mL, because the protoplast formation rate and regeneration rate reached 90% and 30%, respectively, and their product reached the maximum. In this study, it was necessary that UV mutagenesis be excessive to obtain an expanded mutation library. For high lethality protoplasts, under the premise of minimal influence on its recovery, the optimal time for UV mutagenesis of protoplasts was 7 min, and the optimal time for thermal inactivation of protoplasts at 85 ℃ was 30 min. After homologous fusion, four fusion strains of E. coli were obtained, and their stability was analyzed by flow cytometry. The L-lysine yield of QDW-UH3 increased by 7.2% compared with that of QDW in a fermentation experiment, which promoted the expression of key enzymes in L-lysine synthesis, indicating that the combination of ultraviolet mutagenic breeding and protoplast fusion technology improved the acid-production level of the fusion strain. CONCLUSION: This method provides a novel approach for the targeted construction of microbial cell factories.

Plant protoplasts in the age of synthetic biology.

Protoplasts, which are plant cells with their cell walls removed, have been used for decades in plant research and have been instrumental in genetic transformation and the study of various aspects of plant physiology and genetics. With the advent of synthetic biology, these individualized plant cells are fundamental to accelerate the 'design-build-test-learn' cycle, which is relatively slow in plant research. Despite their potential, challenges remain in expanding the use of protoplasts in synthetic biology. The capacity of individual protoplasts to hybridize to form new varieties, and to regenerate from single cells, creating individuals with new features is underexplored. The main objective of this review is to discuss the use of protoplasts in plant synthetic biology and to highlight the challenges to exploiting protoplast technologies in this new 'age of synthetic biology'.

Engineering and characterization of carbohydrate-binding modules for imaging cellulose fibrils biosynthesis in plant protoplasts.

Carbohydrate binding modules (CBMs) are noncatalytic domains that assist tethered catalytic domains in substrate targeting. CBMs have therefore been used to visualize distinct polysaccharides present in the cell wall of plant cells and tissues. However, most previous studies provide a qualitative analysis of CBM-polysaccharide interactions, with limited characterization of engineered tandem CBM designs for recognizing polysaccharides like cellulose and limited application of CBM-based probes to visualize cellulose fibrils synthesis in model plant protoplasts with regenerating cell walls. Here, we examine the dynamic interactions of engineered type-A CBMs from families 3a and 64 with crystalline cellulose-I and phosphoric acid swollen cellulose. We generated tandem CBM designs to determine various characteristic properties including binding reversibility toward cellulose-I using equilibrium binding assays. To compute the adsorption (nkon ) and desorption (koff ) rate constants of single versus tandem CBM designs toward nanocrystalline cellulose, we employed dynamic kinetic binding assays using quartz crystal microbalance with dissipation. Our results indicate that tandem CBM3a exhibited the highest adsorption rate to cellulose and displayed reversible binding to both crystalline/amorphous cellulose, unlike other CBM designs, making tandem CBM3a better suited for live plant cell wall biosynthesis imaging applications. We used several engineered CBMs to visualize Arabidopsis thaliana protoplasts with regenerated cell walls using confocal laser scanning microscopy and wide-field fluorescence microscopy. Lastly, we also demonstrated how CBMs as probe reagents can enable in situ visualization of cellulose fibrils during cell wall regeneration in Arabidopsis protoplasts.

Plant cellulose synthase membrane protein isolation directly from Pichia pastoris protoplasts, liposome reconstitution, and its enzymatic characterization.

Cellulose is synthesized by a plant cell membrane-integrated processive glycosyltransferase (GT) called cellulose synthase (CesA). Since only a few of these plant CesAs have been purified and characterized to date, there are huge gaps in our mechanistic understanding of these enzymes. The biochemistry and structural biology studies of CesAs are currently hampered by challenges associated with their expression and extraction at high yields. To aid in understanding CesA reaction mechanisms and to provide a more efficient CesA extraction method, two putative plant CesAs - PpCesA5 from Physcomitrella patens and PttCesA8 from Populus tremula x tremuloides that are involved in primary and secondary cell wall formation in plants were expressed using Pichia pastoris as an expression host. We developed a protoplast-based membrane protein extraction approach to directly isolate these membrane-bound enzymes, as confirmed by immunoblotting and mass spectrometry-based analyses. Our method gives 3-4-fold higher purified protein yield than the standard cell homogenization protocol. Our method resulted in liposome reconstituted CesA5 and CesA8 enzymes with similar Michaelis-Menten kinetic constants, Km = 167 µM, 108 µM and Vmax = 7.88 × 10-5 µmol/min, 4.31 × 10-5 µmol/min, respectively, in concurrence with the previous studies for enzymes isolated using the standard protocol. Taken together, these results suggest that CesAs involved in primary and secondary cell wall formation can be expressed and purified using a simple and more efficient extraction method. This protocol could help isolate enzymes that unravel the mechanism of native and engineered cellulose synthase complexes involved in plant cell wall biosynthesis.

Effects of Hyphomonas Strains on the Growth of Red Algae Pyropia Species by Attaching Specifically to Their Rhizoids.

Bacteria and marine macroalgae form close associations, while various bacteria affect the morphogenesis and growth of macroalgae. Hyphomonas strains exhibit normal morphogenetic activity in protoplasts of the red alga Pyropia yezoensis (nori). However, the effects of the bacteria on the growth of Pyropia from protoplast cells to regenerated thalli remain unknown. Here, we assessed the growth of P. yezoensis and Pyropia tenera using combined cultures of three Hyphomonas strains (LNM10-16, SCM-2, and LNM-9) and three algal media (artificial seawater with vitamins, artificial seawater, and natural seawater) over 7 weeks. Third week after culture, the three Hyphomonas strains showed almost similar levels of normal growth activity for both Pyropia species. However, at 7 weeks, significant differences were observed among the three Hyphomonas strains in terms of length, length-to-width ratio, and normal morphology of Pyropia thalli. LNM10-16 significantly promoted the thalli length and length-to-width ratios of both Pyropia species in artificial seawater without vitamins and natural seawater, compared with the other two Hyphomonas strains. P. yezoensis cultured in artificial seawater with vitamins showed a much higher demand for LNM10-16 in development of the thalli length than P. tenera. These results may be explained by differences in the growth activities of Hyphomonas strains and the nutrient requirements of Pyropia species. Furthermore, the bacteria were more specifically attached to the rhizoid surfaces of both species. This study is the first to reveal that Hyphomonas strains affect the growth of Pyropia species by attaching to their rhizoids.

Isolation, Purification, and Application of Protoplasts and Transient Expression Systems in Plants.

Protoplasts, derived from plant cells, exhibit remarkable totipotency and hold significant value across a wide spectrum of biological and biotechnological applications. These versatile applications encompass protein subcellular localization and interaction analysis, gene expression regulation, functional characterization, gene editing techniques, and single-cell sequencing. Protoplasts' usability stems from their inherent accessibility and their ability to efficiently incorporate exogenous genes. In this review, we provide a comprehensive overview, including details on isolation procedures and influencing factors, purification and viability assessment methodologies, and the utilization of the protoplast transient expression system. The aim is to provide a comprehensive overview of current applications and offer valuable insights into protoplast isolation and the establishment of transient expression systems in a diverse range of plant species, thereby serving as a valuable resource for the plant science community.

The SAH7 Homologue of the Allergen Ole e 1 Interacts with the Putative Stress Sensor SBP1 (Selenium-Binding Protein 1) in Arabidopsis thaliana.

In this study, we focused on a member of the Ole e 1 domain-containing family, AtSAH7, in Arabidopsis thaliana. Our lab reports for the first time on this protein, AtSAH7, that was found to interact with Selenium-binding protein 1 (AtSBP1). We studied by GUS assisted promoter deletion analysis the expression pattern of AtSAH7 and determined that the sequence 1420 bp upstream of the transcription start can act as a minimal promoter inducing expression in vasculature tissues. Moreover, mRNA levels of AtSAH7 were acutely increased under selenite treatment in response to oxidative stress. We confirmed the aforementioned interaction in vivo, in silico and in planta. Following a bimolecular fluorescent complementation approach, we determined that the subcellular localization of the AtSAH7 and the AtSAH7/AtSBP1 interaction occur in the ER. Our results indicate the participation of AtSAH7 in a biochemical network regulated by selenite, possibly associated with responses to ROS production.

Harnessing CRISPR/Cas9 for Enhanced Disease Resistance in Hot Peppers: A Comparative Study on CaMLO2-Gene-Editing Efficiency across Six Cultivars.

The Capsicum annuum Mildew Locus O (CaMLO2) gene is vital for plant defense responses against fungal pathogens like powdery mildew, a significant threat to greenhouse pepper crops. Recent advancements in genome editing, particularly using clustered regularly interspaced short palindromic repeats (CRISPR)/Cas9, have unlocked unprecedented opportunities for modifying disease-resistant genes and improving crop characteristics. However, the application of CRISPR technology in pepper cultivars has been limited, and the regeneration process remains challenging. This study addresses these limitations by investigating the feasibility of using the validated CaMLO2 genetic scissors system in six commercial hot pepper cultivars. We assessed the gene-editing efficiency of the previously reported high-efficiency Cas9/CaMLO2single-guide RNA (sgRNA)1-ribonucleoprotein (RNP) and the low-efficiency Cas9/CaMLO2sgRNA2-RNP systems by extending their application from the bell pepper 'Dempsey' and the hot pepper 'CM334' to six commercial hot pepper cultivars. Across the six cultivars, CaMLO2sgRNA1 demonstrated an editing efficiency ranging from 6.3 to 17.7%, whereas CaMLO2sgRNA2 exhibited no editing efficiency, highlighting the superior efficacy of sgRNA1. These findings indicate the potential of utilizing the verified Cas9/CaMLO2sgRNA1-RNP system to achieve efficient gene editing at the CaMLO2 locus in different Capsicum annuum cultivars regardless of their cultivar genotypes. This study provides an efficacious genome-editing tool for developing improved pepper cultivars with CaMLO2-mediated enhanced disease resistance.

CRISPR/Cas9 Mutagenesis through Introducing a Nanoparticle Complex Made of a Cationic Polymer and Nucleic Acids into Maize Protoplasts.

Presently, targeted gene mutagenesis attracts increasing attention both in plant research and crop improvement. In these approaches, successes are largely dependent on the efficiency of the delivery of gene editing components into plant cells. Here, we report the optimization of the cationic polymer poly(2-hydroxypropylene imine) (PHPI)-mediated delivery of plasmid DNAs, or single-stranded oligonucleotides labelled with Cyanine3 (Cy3) or 6-Carboxyfluorescein (6-FAM)-fluorescent dyes into maize protoplasts. Co-delivery of the GFP-expressing plasmid and the Cy3-conjugated oligonucleotides has resulted in the cytoplasmic and nuclear accumulation of the green fluorescent protein and a preferential nuclear localization of oligonucleotides. We show the application of nanoparticle complexes, i.e., "polyplexes" that comprise cationic polymers and nucleic acids, for CRISPR/Cas9 editing of maize cells. Knocking out the functional EGFP gene in transgenic maize protoplasts was achieved through the co-delivery of plasmids encoding components of the editing factors Cas9 (pFGC-pcoCas9) and gRNA (pZmU3-gRNA) after complexing with a cationic polymer (PHPI). Several edited microcalli were identified based on the lack of a GFP fluorescence signal. Multi-base and single-base deletions in the EGFP gene were confirmed using Sanger sequencing. The presented results support the use of the PHPI cationic polymer in plant protoplast-mediated genome editing approaches.

Genomic distribution and context dependent functionality of novel WRKY transcription factor binding sites.

BACKGROUND: The WT-boxes NGACTTTN are novel microbe-associated molecular pattern (MAMP)-responsive cis-regulatory sequences. Many of them are uncommon WRKY transcription factor (TF) binding sites. RESULTS: To understand their functional relevance, a genomic distribution analysis of the 16 possible WT-boxes and a functional analysis of a WT-box rich promoter was done. The genomic distribution analysis shows an enrichment of specific WT-boxes within 500 bp upstream of all Arabidopsis thaliana genes. Those that harbour a T 5' to the core sequence GACTTT can also be part of the classic WRKY binding site the W-box TTGACT/C. The MAMP-responsive gene ATEP3, a class IV chitinase, harbours seven WT-boxes within its 1000 bp upstream region. In the context of synthetic promoters, the four proximal WT-boxes confer MAMP responsivity while the three WT-boxes further upstream have no effect. Rendering the nucleotides adjacent and in the vicinity of the WT-box core sequence reveals their functional importance for gene expression. A 158 bp long ATEP3 minimal promoter harbouring the two WT-boxes CGACTTTT, confers WT-box-dependent basal and MAMP-responsive reporter gene expression. The ATEP3 gene is a proposed target of WRKY50 and WRKY70. WRKY50 negatively regulates MAMP responsivity of the two WT-boxes CGACTTTT, while WRKY70 activates gene expression in a WT-box dependent manner. Both WRKY factors bind directly to the WT-box CGACTTTT. CONCLUSION: In summary, WT-boxes are enriched in promoter regions and comprise novel and uncommon WRKY binding sites required for basal and MAMP-induced gene expression. WT-boxes not being part of a W-box may be a missing link for WRKY target gene prediction when these genes do not harbour a W-box.

Adaptive Diversification in the Cellular Circadian Behavior of Arabidopsis Leaf- and Root-Derived Cells.

The plant circadian system is based on self-sustained cellular oscillations and is utilized to adapt to daily and seasonal environmental changes. The cellular circadian clocks in the above- and belowground plant organs are subjected to diverse local environments. Individual cellular clocks are affected by other cells/tissues in plants, and the intrinsic circadian properties of individual cells remain to be elucidated. In this study, we monitored bioluminescence circadian rhythms of individual protoplast-derived cells from leaves and roots of a CCA1::LUC Arabidopsis transgenic plant. We analyzed the circadian properties of the leaf- and root-derived cells and demonstrated that the cells with no physical contact with other cells harbor a genuine circadian clock with ∼24-h periodicity, entrainability and temperature compensation of the period. The stability of rhythm was dependent on the cell density. High cell density resulted in an improved circadian rhythm of leaf-derived cells while this effect was observed irrespective of the phase relation between cellular rhythms. Quantitative and statistical analyses for individual cellular bioluminescence rhythms revealed a difference in amplitude and precision of light/dark entrainment between the leaf- and root-derived cells. Circadian systems in the leaves and roots are diversified to adapt to their local environments at the cellular level.

MicroRNA biogenesis and activity in plant cell dedifferentiation stimulated by cell wall removal.

BACKGROUND: Despite the frequent use of protoplast-to-plant system in in vitro cultures of plants, the molecular mechanisms regulating the first and most limiting stages of this process, i.e., protoplast dedifferentiation and the first divisions leading to the formation of a microcallus, have not been elucidated. RESULTS: In this study, we investigated the function of miRNAs in the dedifferentiation of A. thaliana mesophyll cells in a process stimulated by the enzymatic removal of the cell wall. Leaf cells, protoplasts and CDPs (cells derived from protoplasts) cultured for 24, 72 and 120 h (first cell division). In protoplasts, a strong decrease in the amount of AGO1 in both the nucleus and the cytoplasm, as well as dicing bodies (DBs), which are considered to be sites of miRNA biogenesis, was shown. However during CDPs division, the amounts of AGO1 and DBs strongly increased. MicroRNA transcriptome studies demonstrated that lower amount of differentially expressed miRNAs are present in protoplasts than in CDPs cultured for 120 h. Then analysis of differentially expressed miRNAs, selected pri-miRNA and mRNA targets were performed. CONCLUSION: This result indicates that miRNA function is not a major regulation of gene expression in the initial but in later steps of dedifferentiation during CDPs divisions. miRNAs participate in organogenesis, oxidative stress, nutrient deficiencies and cell cycle regulation in protoplasts and CDPs. The important role played by miRNAs in the process of dedifferentiation of mesophyll cells was confirmed by the increased mortality and reduced cell division of CDPs derived from mutants with defective miRNA biogenesis and miR319b expression.

Fluorescence activated cell sorting-A selective tool for plant cell isolation and analysis.

Instrumentation for flow cytometry and sorting is designed around the assumption that samples are single-cell suspensions. However, with few exceptions, higher plants comprise complex multicellular tissues and organs, in which the individual cells are held together by shared cell walls. Single-cell suspensions can be obtained through digestion of the cells walls and release of the so-called protoplasts (plants without their cell wall). Here we describe best practices for protoplast preparation, and for analysis through flow cytometry and cell sorting. Finally, the numerous downstream applications involving sorted protoplasts are discussed.

Laser microirradiation as a versatile system for probing protein recruitment and protein-protein interactions at DNA lesions in plants.

Plant protoplasts are generated by treatment with digestion enzymes, producing plant cells devoid of the cell wall and competent for efficient polyethylene glycol mediated transformation. This way fluorescently tagged proteins can be introduced to the protoplasts creating an excellent system to probe the localization and function of uncharacterized plant proteins in vivo. We implement the method of laser microirradiation to generate DNA lesions in Arabidopsis thaliana, which enables monitoring the recruitment and dynamics of the DNA repair factors as well as bimolecular fluorescence complementation assay to test transient, conditional interactions of proteins directly at sites of DNA damage. We demonstrate that laser microirradiation in protoplasts yields a physiological cellular response to DNA lesions, based on proliferating cell nuclear antigen (PCNA) redistribution in the nucleus and show that factors involved in DNA repair, such as MRE11 or PCNA are recruited to induced DNA lesions. This technique is relatively easy to adopt by other laboratories and extends the current toolkit of methods aimed to understand the details of DNA damage response in plants. The presented method is fast, flexible and facilitates work with different mutant backgrounds or even different species, extending the utility of the system.