Design and development of a new ambr250® bioreactor vessel for improved cell and gene therapy applications.

The emergence of cell and gene therapies has generated significant interest in their clinical and commercial potential. However, these therapies are prohibitively expensive to manufacture and can require extensive time for development due to our limited process knowledge and understanding. The automated ambr250® stirred-tank bioreactor platform provides an effective platform for high-throughput process development. However, the original dual pitched-blade 20 mm impeller and baffles proved sub-optimal for cell therapy candidates that require suspension of microcarriers (e.g. for the culture of adherent human mesenchymal stem cells) or other particles such as activating Dynabeads® (e.g. for the culture of human T-cells). We demonstrate the development of a new ambr250® stirred-tank bioreactor vessel which has been designed specifically to improve the suspension of microcarriers/beads and thereby improve the culture of such cellular systems. The new design is unbaffled and has a single, larger elephant ear impeller. We undertook a range of engineering and physical characterizations to determine which vessel and impeller configuration would be most suitable for suspension based on the minimum agitation speed (NJS) and associated specific power input (P/V)JS. A vessel (diameter, T, = 60 mm) without baffles and incorporating a single elephant ear impeller (diameter 30 mm and 45° pitch-blade angle) was selected as it had the lowest (P/V)JS and therefore potentially, based on Kolmogorov concepts, was the most flexible system. These experimentally-based conclusions were further validated firstly with computational fluid dynamic (CFD) simulations and secondly experimental studies involving the culture of both T-cells with Dynabeads® and hMSCs on microcarriers. The new ambr250® stirred-tank bioreactor successfully supported the culture of both cell types, with the T-cell culture demonstrating significant improvements compared to the original ambr250® and the hMSC-microcarrier culture gave significantly higher yields compared with spinner flask cultures. The new ambr250® bioreactor vessel design is an effective process development tool for cell and gene therapy candidates and potentially for autologous manufacture too.

Development of a high-throughput scale-down model in Ambr® 250 HT for plasmid DNA fermentation processes.

Recent advances in messenger ribonucleic acid (mRNA) vaccines and gene therapy vectors have increased the need for rapid plasmid DNA (pDNA) screening and production within the biopharmaceutical industry. High-throughput (HT) fermentor systems, such as the Ambr® 250 HT, can significantly accelerate process development timelines of pDNA upstream processes compared to traditional bench-scale glass fermentors or small-scale steam-in-place (SIP) fermentors. However, such scale-down models must be qualified to ensure that they are representative of the larger scale process similar to traditional small-scale models. In the current study, we developed a representative scale-down model of a Biostat® D-DCU 30 L pDNA fermentation process in Ambr® 250 HT fermentors using three cell lines producing three different constructs. The Ambr scale-down model provided comparable process performance and pDNA quality as the 30 L SIP fermentation process. In addition, we demonstrated the predictive value of the Ambr model by two-way qualification, first by accurately reproducing the prior trends observed in a 30 L process, followed by predicting new process trends that were then successfully reproduced in the 30 L process. The representative and predictive scale-down Ambr model developed in this study would enable a faster and more efficient approach to strain/clone/host-cell screening, pDNA process development and characterization studies, process scale-up studies, and manufacturing support.

Bioprocess Development and Characterization of a 13C-Labeled Hybrid Bispecific Antibody Produced in Escherichia coli.

Monoclonal antibodies (mAbs) are highly efficacious therapeutics; however, due to their large, dynamic nature, structural perturbations and regional modifications are often difficult to study. Moreover, the homodimeric, symmetrical nature of mAbs makes it difficult to elucidate which heavy chain (HC)-light chain (LC) pairs are responsible for any structural changes, stability concerns, and/or site-specific modifications. Isotopic labeling is an attractive means for selectively incorporating atoms with known mass differences to enable identification/monitoring using techniques such as mass spectrometry (MS) and nuclear magnetic resonance (NMR). However, the isotopic incorporation of atoms into proteins is typically incomplete. Here we present a strategy for incorporating 13C-labeling of half antibodies using an Escherichia coli fermentation system. Unlike previous attempts to generate isotopically labeled mAbs, we provide an industry-relevant, high cell density process that yielded >99% 13C-incorporation using 13C-glucose and 13C-celtone. The isotopic incorporation was performed on a half antibody designed with knob-into-hole technology to enable assembly with its native (naturally abundant) counterpart to generate a hybrid bispecific (BsAb) molecule. This work is intended to provide a framework for producing full-length antibodies, of which half are isotopically labeled, in order to study the individual HC-LC pairs.

Use of ambr®250 to assess mucic acid production in fed-batch cultures of a marine Trichoderma sp. D-221704.

Mucic acid, a diacid with potential use in the food, cosmetic, chemical and pharmaceutical industries, can be produced by microbial conversion of D-galacturonic acid, which is abundant in pectin. Using the ambr®250 bioreactor system, we found that a recently generated transformant (D-221704, formerly referred to as T2) of a marine Trichoderma species produced up to 53 g L-1 mucic acid in glucose-limited fed-batch culture with D-galacturonic acid in the feed at pH 4, with a yield of 0.99 g mucic acid per g D-galacturonic acid consumed. Yeast extract was not essential for high production, but increased the initial production rate. Reducing the amount of glucose as the co-substrate reduced the amount of mucic acid produced to 31 g L-1. Mucic acid could also be produced at pH values less than 4.0 (3.5 and 3.0), but the amount produced was less than at pH 4.0. Furthermore, the yield of mucic acid on D-galacturonic acid at the end of the cultivations (0.5 to 0.7 g g-1) at these low pH levels suggested that recovery may be more difficult at lower pH on account of the high level of crystal formation. Another strain engineered to produce mucic acid, Trichoderma reesei D-161646, produced only 31 g L-1 mucic acid under the conditions used with D-221704.

Transient ammonia stress on Chinese hamster ovary (CHO) cells yield alterations to alanine metabolism and IgG glycosylation profiles.

BACKGROUND: Ammonia concentrations typically increase during mammalian cell cultures, mainly due to glutamine and other amino acid consumption. An early ammonia stress indicator is a metabolic shift with respect to alanine. To determine the underlying mechanisms of this metabolic shift, a Chinese hamster ovary (CHO) cell line with two distinct ages (standard and young) was cultured in parallel fed-batch bioreactors with 0 mM or 10 mM ammonia added at 12 h. Reduced viable cell densities were observed for the stressed cells, while viability was not significantly affected. The stressed cultures had higher alanine, lactate, and glutamate accumulation. Interestingly, the ammonia concentrations were similar by Day 8.5 for all cultures. We hypothesized the ammonia was converted to alanine as a coping mechanism. Interestingly, no significant differences were observed for metabolite profiles due to cell age. Glycosylation analysis showed the ammonia stress reduced galactosylation, sialylation, and fucosylation. Transcriptome analysis of the standard-aged cultures indicated the ammonia stress had a limited impact on the transcriptome, where few of the significant changes were directly related metabolite or glycosylation reactions. These results indicate that mechanisms used to alleviate ammonia stress are most likely controlled post-transcriptionally, and this is where future research should focus.

Efficient high-throughput biological process characterization: Definitive screening design with the ambr250 bioreactor system.

The burgeoning pipeline for new biologic drugs has increased the need for high-throughput process characterization to efficiently use process development resources. Breakthroughs in highly automated and parallelized upstream process development have led to technologies such as the 250-mL automated mini bioreactor (ambr250™) system. Furthermore, developments in modern design of experiments (DoE) have promoted the use of definitive screening design (DSD) as an efficient method to combine factor screening and characterization. Here we utilize the 24-bioreactor ambr250™ system with 10-factor DSD to demonstrate a systematic experimental workflow to efficiently characterize an Escherichia coli (E. coli) fermentation process for recombinant protein production. The generated process model is further validated by laboratory-scale experiments and shows how the strategy is useful for quality by design (QbD) approaches to control strategies for late-stage characterization.