Concentration-Driven Interfacial Amorphization toward Highly Stable and High-Rate Zn Metal Batteries.

The interfacial structure holds great promise in suppressing dendrite growth and parasitic reactions of zinc metal in aqueous media. Current advancements prioritize novel component fabrication, yet the local crystal structure significantly impacts the interfacial properties. In addition, there is still a critical need for scalable synthesis methods for expediting the commercialization of aqueous zinc metal batteries (AZMBs). Herein, we propose a scalable concentration-controlled method for realizing crystalline to amorphous transformation of the Zn metal interface with exceptional scalability (>1 m2) and processing consistency (>30 trials). Theoretical and experimental analyses highlight the advantages of amorphous ZnO, which exhibits moderate adsorption energy, strong desolvation ability, and hydrophilicity. Employing the amorphous ZnO-coated zinc metal anode (AZO-Zn) significantly enhances the cycling performance, impressively maintaining 1000 cycles at 100 mA cm-2. The prototype AZO-Zn||MnO2@CNT pouch cell demonstrates a capacity of 15.7 mAh and maintains 91% of its highest capacity over 100 cycles, presenting promising avenues for the future commercialization of AZMBs.

Amorphous Materials for Lithium-Ion and Post-Lithium-Ion Batteries.

Lithium-ion and post-lithium-ion batteries are important components for building sustainable energy systems. They usually consist of a cathode, an anode, an electrolyte, and a separator. Recently, the use of solid-state materials as electrolytes has received extensive attention. The solid-state electrolyte materials (as well as the electrode materials) have traditionally been overwhelmingly crystalline materials, but amorphous (disordered) materials are gradually emerging as important alternatives because they can increase the number of ion storage sites and diffusion channels, enhance solid-state ion diffusion, tolerate more severe volume changes, and improve reaction activity. To develop superior amorphous battery materials, researchers have conducted a variety of experiments and theoretical simulations. This review highlights the recent advances in using amorphous materials (AMs) for fabricating lithium-ion and post-lithium-ion batteries, focusing on the correlation between material structure and properties (e.g., electrochemical, mechanical, chemical, and thermal ones).  We  review both the conventional and the emerging characterization methods for analyzing AMs and present the roles of disorder in influencing the performances of various batteries such as those based on lithium, sodium, potassium, and zinc. Finally,  we  describe the challenges and perspectives for commercializing rechargeable AMs-based batteries.

Amorphous Anode Materials for Fast-charging Lithium-ion Batteries.

Fast-charging technology is set to revolutionize the field of lithium-ion batteries (LIBs), driving the creation of next-generation devices with the ability to get charged within a short span of time. From the anode perspective, it is of paramount importance to design materials that can withstand continuous Li+ insertion/deinsertion at high charging rates and still remain unaffected by factors such as mechanical fractures, electrolyte side reactions, polarisation, lithium plating and heat generation. Herein, the recent advancements in the design of amorphous materials as anodes for fast-charging LIBs have been discussed. While the development of this particular class of materials for application in high-rate anodes has been paid limited attention in recent literature, it holds immense promise for improving the fast-charging capabilities. This concept summarizes the recent strides made in this emerging field, outlining the strategies employed in the design of amorphous anodes and emphasizing the crucial role played by the amorphous nature in achieving fast-charging performance. Further, the successive initiatives that can be undertaken to drive the progress of amorphous materials for fast charging LIBs have also been detailed, which could potentially improve their commercial viability.

Fragility and Tendency to Crystallization for Structurally Related Compounds.

The present study was designed to investigate the physical stability of three organic materials with similar chemical structures. The examined compounds revealed completely different crystallization tendencies in their supercooled liquid states and were classified into three distinct classes based on their tendency to crystallize. (S)-4-Benzyl-2-oxazolidinone easily crystallizes during cooling from the melt; (S)-4-Benzylthiazolidine-2-thione does not crystallize during cooling from the melt, but crystallizes easily during subsequent reheating above Tg; and (S)-4-Benzyloxazolidine-2-thione does not crystallize either during cooling from the melt or during reheating. Such different tendencies to crystallize are observed despite the very similar chemical structures of the compounds, which only differ in oxide or sulfur atoms in one of their rings. We also studied the isothermal crystallization kinetics of the materials that were shown to transform into a crystalline state. Molecular dynamics and thermal properties were thoroughly investigated using broadband dielectric spectroscopy, as well as conventional and temperature-modulated differential scanning calorimetry in the wide temperature range. It was found that all three glass formers have the same dynamic fragility (m = 93), calculated directly from dielectric structural relaxation times. This result verifies that dynamic fragility is not related to the tendency to crystallize. In addition, thermodynamic fragility predictions were also made using calorimetric data. It was found that the thermodynamic fragility evaluated based on the width of the glass transition, observed in the temperature dependence of heat capacity, correlates best with the tendency to crystallize.

A Six-Year Hydration Evaluation of Cs-Bearing Materials at Room Temperature and 55% Relative Humidity Simulating Radioactive Waste with Different Crystallinities.

Radioactive wastes often contain amorphous and crystalline phases, and vapor hydration can affect their durability. In this study, Cs-clinoptilolite was heated (at 1100 °C and for 2-36 h) to prepare the samples that were composed mainly of an amorphous phase (AmP) and CsAlSi5O12 (≥94%) with minor CsAlSi2O6. Six samples with an AmP/CsAlSi5O12 ratio from 26.5 to 0.1 were kept at 21 °C and 55% relative humidity, and their hydration was measured via thermogravimetry (TG) over a period of almost six years. The hydration that resulted was directly related to the AmP quantity. The increase in water content followed a logarithmic trend over time. It reached 1.95% in the AmP-richest material, while it attained only 0.07% in the most crystalline sample. The hydrolysis of the AmP led to an increase over time in the tightly bound water. Samples with an AmP of ≤19% demonstrated slightly higher durability due to the lower Cs content in the AmP.

Engineering Tunable Ratiometric Dual Emission in Single Emitter-based Amorphous Systems.

Molecular emitters with multi-emissive properties are in high demand in numerous fields, while these properties basically depend on specific molecular conformation and packing. For amorphous systems, special molecular arrangement is unnecessary, but it remains challenging to achieve such luminescent behaviors. Herein, we present a general strategy that takes advantage of molecular rigidity and S1 -T1 energy gap balance for emitter design, which enables fluorescence-phosphorescence dual-emission properties in various solid forms, whether crystalline or amorphous. Subsequently, the amorphism of the emitters based polymethyl methacrylate films endowed an in situ regulation of the dual-emissive characteristics. With the ratiometric regulation of phosphorescence by external stimuli and stable fluorescence as internal reference, highly controllable luminescent color tuning (yellow to blue including white emission) was achieved. There properties together with a persistent luminous behavior is of benefit for an irreplaceable set of optical information combination, featuring an ultrahigh-security anti-counterfeiting ability. Our research introduces a concept of eliminating the crystal-form and molecular-conformational dependence of complex luminescent properties through emitter molecular design. This has profound implications for the development of functional materials.

Platinum-Group Metal High-Entropy Selenides for the Hydrogen Evolution Reaction.

The selenides of platinum-group metals (PGMs) are emerging as promising catalysts for diverse electrochemical reactions. To date, most studies have focused on single metal or bimetallic systems, whereas the preparation of a high-entropy (HE) selenide consisting of five or more PGM elements holds the promise to further enhance catalytic performance by introducing abundant active sites with various local coordination environments and electronic structures. Herein, we report for the first time the synthesis of PGM-based HE-Selenide (HE-Se) nanoparticles with a unique amorphous structure. The atomic metal-Se coordination and the presence of short-range order were thoroughly revealed. It is further shown that the amorphous HE-Se can be facilely transformed into a single-phase crystalline HE-Se with a cubic structure by thermal annealing. Catalytically, the amorphous HE-Se showed better acidic hydrogen evolution activity over monometallic PGM-based selenides and the crystalline counterpart, demonstrating the advantages of high-entropy configuration and amorphous structure. Our findings may pave the way toward the synthesis and property exploration of amorphous PGM-based selenides with tunable compositions.

Understanding Defects in Amorphous Silicon with Million-Atom Simulations and Machine Learning.

The structure of amorphous silicon (a-Si) is widely thought of as a fourfold-connected random network, and yet it is defective atoms, with fewer or more than four bonds, that make it particularly interesting. Despite many attempts to explain such "dangling-bond" and "floating-bond" defects, respectively, a unified understanding is still missing. Here, we use advanced computational chemistry methods to reveal the complex structural and energetic landscape of defects in a-Si. We study an ultra-large-scale, quantum-accurate structural model containing a million atoms, and thousands of individual defects, allowing reliable defect-related statistics to be obtained. We combine structural descriptors and machine-learned atomic energies to develop a classification of the different types of defects in a-Si. The results suggest a revision of the established floating-bond model by showing that fivefold-bonded atoms in a-Si exhibit a wide range of local environments-analogous to fivefold centers in coordination chemistry. Furthermore, it is shown that fivefold (but not threefold) coordination defects tend to cluster together. Our study provides new insights into one of the most widely studied amorphous solids, and has general implications for understanding defects in disordered materials beyond silicon alone.

Polymeric Metal Halides with Bright Luminescence and Versatile Processability.

Most of current metal halide materials, including all inorganic and organic-inorganic hybrids, are crystalline materials with poor workability and plasticity that limit their application scope. Here, we develop a novel class of materials termed polymeric metal halides (PMHs) through introducing polycations into antimony-based metal halide materials as A-site cations. A series of PMHs with orange-yellow broadband emission and large Stokes shift originating from inorganic self-trapped excitons are successfully prepared, which meanwhile exhibit the excellent processability and formability of polymers. The versatility of these PMHs is manifested as the broad choices of polycations, the ready extension to manganese- and copper-based halides, and the tolerance to molar ratios between polycations and metal halides in the formation of PMHs. The merger of polymer chemistry and inorganic chemistry thus provides a novel generic platform for the development of metal halide functional materials.

Heteroatoms-Stabilized Single Palladium Atoms on Amorphous Zeolites: Breaking the Tradeoff between Catalytic Activity and Selectivity for Alkyne Semihydrogenation.

As a fundamental industrial catalytic process, the semihydrogenation of alkynes presents a challenge in striking a balance between activity and selectivity due to the issue of over-hydrogenation. Herein, we develop an efficient catalytic system based on single-atom Pd catalysts supported on boron-containing amorphous zeolites (Pd/AZ-B), achieving the tradeoff breaking between the activity and selectivity for the selective hydrogenation of alkynes. Advanced characterizations and theoretical density functional theory calculations confirm that the incorporated B atoms in the Pd/AZ-B can not only alter the geometric and electronic properties of Pd atoms by controlling the electron migration from Pd but also mitigate the interaction between alkene and the catalyst supports. This boosts the exceptional catalytic efficacy in the semihydrogenation of phenylacetylene to styrene under mild conditions (298 K, 2 bar H2), achieving a recorded turnover frequency (TOF) value of 24198 h-1 and demonstrating 95 % selectivity to styrene at full conversion of phenylacetylene. By comparison, the heteroatom-free amorphous zeolite-anchored Pd nanoparticles and the commercial Lindlar catalyst have styrene selectivities of 73 % and 15 %, respectively, under identical reaction conditions. This work establishes a solid foundation for developing highly active and selective hydrogenation catalysts by controllably optimizing their electronic and steric properties.

Enhanced Charge Transfer Process and Photocatalytic Activity over a Phosphonate-based MOF via Amorphization Strategy.

Recently, amorphous materials have gained great attention as an emerging kind of functional material, and their characteristics such as isotropy, absence of grain boundaries, and abundant defects are very likely to outrun the disadvantages of crystalline counterparts, such as low conductivity, and ultimately lead to improved charge transfer efficiency. Herein, we investigated the effect of amorphization on the charge transfer process and photocatalytic performance with a phosphonate-based metal-organic framework (FePPA) as the research object. Comprehensive experimental results suggest that compared to crystalline FePPA, amorphous FePPA has more distorted metal nodes, which affects the electron distribution and consequently improves the photogenerated charge separation efficiency. Meanwhile, the distorted metal nodes in amorphous FePPA also greatly promote the adsorption and activation of O2. Hence, amorphous FePPA exhibits a better performance of photocatalytic C(sp3)-H bond activation for selective oxidation of toluene to benzaldehyde. This work illustrates the advantages of amorphous MOFs in the charge transfer process, which is conducive to the further development of high performance MOFs-based photocatalysts.

Amorphous Fe-Phytate Enables Fast Polysulfide Redox for High-Loading Lithium Sulfur Batteries.

Utilizing catalysts to accelerate polysulfides conversion are of paramount importance to eliminate the shuttling effect and improve the practical performance of lithium-sulfur (Li-S) batteries. The amorphism, attributes to the abundant unsaturated surface active sites, has recently been recognized as a contribution to increase the activity of catalysts. However, the investigation on amorphous catalysts has received limited interest in lithium-sulfur batteries due to lack of understanding of their composition structure activity. Herein, a amorphous Fe-Phytate structure is proposed to enhance polysulfide conversion and suppress polysulfide shuttling by modifying polypropylene separator (C-Fe-Phytate@PP). The polar Fe-Phytate with distorted VI coordination Fe active centers strongly intake polysulfide electron by forming FeS bond to accelerate the polysulfide conversion. The surface mediated polysulfides redox gives rise to a higher exchange current in comparison with carbon. Furthermore, Fe-Phytate owns robust adsorption to polysulfide and effectively reduce the shuttling effect. With the C-Fe-Phytate@PP separator, the Li-S batteries exhibit an outstanding rate capability of 690 mAh g-1 at 5 C and an ultrahigh areal capacity of 7.8 mAh cm-2 even at a high sulfur loading of 7.3 mg cm-2 . The work provides a novel separator for facilitating the actual applications of Li-S batteries.

Review: understanding the properties of amorphous materials with high-performance computing methods.

Amorphous materials have no long-range order in their atomic structure. This makes much of the formalism for the study of crystalline materials irrelevant, and so elucidating their structure and properties is challenging. The use of computational methods is a powerful complement to experimental studies, and in this paper we review the use of high-performance computing methods in the simulation of amorphous materials. Five case studies are presented to showcase the wide range of materials and computational methods available to practitioners in this field. This article is part of a discussion meeting issue 'Supercomputing simulations of advanced materials'.

Explaining the low-frequency shear elasticity of confined liquids.

Experimental observations of unexpected shear rigidity in confined liquids, on very low frequency scales on the order of 0.01 to 0.1 Hz, call into question our basic understanding of the elasticity of liquids and have posed a challenge to theoretical models of the liquid state ever since. Here we combine the nonaffine theory of lattice dynamics valid for disordered condensed matter systems with the Frenkel theory of the liquid state. The emerging framework shows that applying confinement to a liquid can effectively suppress the low-frequency modes that are responsible for nonaffine soft mechanical response, thus leading to an effective increase of the liquid shear rigidity. The theory successfully predicts the scaling law [Formula: see text] for the low-frequency shear modulus of liquids as a function of the confinement length L, in agreement with experimental results, and provides the basis for a more general description of the elasticity of liquids across different time and length scales.

Structure of Amorphous Two-Dimensional Materials: Elemental Monolayer Amorphous Carbon versus Binary Monolayer Amorphous Boron Nitride.

The structure of amorphous materials has been debated since the 1930s as a binary question: amorphous materials are either Zachariasen continuous random networks (Z-CRNs) or Z-CRNs containing crystallites. It was recently demonstrated, however, that amorphous diamond can be synthesized in either form. Here we address the question of the structure of single-atom-thick amorphous monolayers. We reanalyze the results of prior simulations for amorphous graphene and report kinetic Monte Carlo simulations based on alternative algorithms. We find that crystallite-containing Z-CRN is the favored structure of elemental amorphous graphene, as recently fabricated, whereas the most likely structure of binary monolayer amorphous BN is altogether different than either of the two long-debated options: it is a compositionally disordered "pseudo-CRN" comprising a mix of B-N and noncanonical B-B and N-N bonds and containing "pseudocrystallites", namely, honeycomb regions made of noncanonical hexagons. Implications for other nonelemental 2D and bulk amorphous materials are discussed.

Supercritical CO2 -Induced Amorphization in 2D Materials: Mechanism and Applications.

Supercritical carbon dioxide (SC CO2 )-assisted chemical and material processing has shown great success in the fabrication of 2D amorphous materials, while the amorphization mechanism in SC CO2 is quite complicated to be understand. In this review, we introduce different kinds of 2D amorphous materials prepared with SC CO2 and discuss the possible amorphization mechanism and how they affect the structures and properties of 2D materials. Their applications are further presented and discussed. In addition, the prospective of future development of SC CO2 -assisted fabrication of 2D amorphous materials is also involved. The investigation of SC CO2 induced amorphization not only provides theoretic understanding of amorphization process, but also directs to the preparation and application of 2D amorphous materials with specific structure and property, suggesting the promising future of SC CO2 -assisted process in material design and engineering.

Structure and Bonding in Amorphous Red Phosphorus.

Amorphous red phosphorus (a-P) is one of the remaining puzzling cases in the structural chemistry of the elements. Here, we elucidate the structure, stability, and chemical bonding in a-P from first principles, combining machine-learning and density-functional theory (DFT) methods. We show that a-P structures exist with a range of energies slightly higher than those of phosphorus nanorods, to which they are closely related, and that the stability of a-P is linked to the degree of structural relaxation and medium-range order. We thus complete the stability range of phosphorus allotropes [Angew. Chem. Int. Ed. 2014, 53, 11629] by now including the previously poorly understood amorphous phase, and we quantify the covalent and van der Waals interactions in all main phases of phosphorus. We also study the electronic densities of states, including those of hydrogenated a-P. Beyond the present study, our structural models are expected to enable wider-ranging first-principles investigations-for example, of a-P-based battery materials.

Enabling the Operation of Highly Compatible LiI-3-Hydroxypropionitrile Small-Molecule Solid-State Electrolytes in Lithium Metal Batteries via Stepped-Amorphization Strategy.

Integrating the advantages of both inorganic ceramic and organic polymer solid-state electrolytes, small-molecule solid-state electrolytes represented by LiI-3-hydroxypropionitrile (LiI-HPN) inorganic-organic hybrid systems possess good interfacial compatibility and high modulus. However, their lack of intrinsic Li+ conduction ability hinders potential application in lithium metal batteries until now, despite containing LiI phase composition. Herein, inspired by evolution tendency of ionic conduction behaviors together with first-principles molecular dynamics simulations, we propose a stepped-amorphization strategy to break the Li+ conduction bottleneck of LiI-HPN. It involves three progressive steps of composition (LiI-content increasing), time (long-time standing), and temperature (high-temperature melting) regulations, to essentially construct a small-molecule-based composite solid-state electrolyte with intensified amorphous degree, which realizes efficient conversion from an I- to Li+ conductor and improved conductivity. As a proof, the stepped-optimized LiI-HPN is successfully operated in lithium metal batteries cooperated with Li4 Ti5 O12 cathode to deliver considerable compatibility and stability over 250 cycles. This work not only clarifies the ionic conduction mechanisms of LiI-HPN inorganic-organic hybrid systems, but also provides a reasonable strategy to broaden the application scenarios of highly compatible small-molecule solid-state electrolytes.

Properties of Single-Component Metal-Organic Framework Crystal-Glass Composites.

The formation, and subsequent structural, thermal and adsorptive properties of single-component metal-organic framework crystal-glass composites (MOF-CGCs) are investigated. A series of novel materials exhibiting chemically identical glassy and crystalline phases within the same material were produced, where crystalline ZIF-62(Zn) was incorporated within an ag ZIF-62(Zn) matrix. X-ray diffraction showed that the crystalline phase was still present after heating to above the glass transition temperature of ag ZIF-62(Zn), and interfacial compatibility between the crystalline and glassy phases was investigated using a mixed-metal (ZIF-62(Co))0.5 (ag ZIF-62(Zn))0.5 analogue. CO2 gas adsorption measurements showed that the CO2 uptakes of the MOF-CGCs were between those of the crystalline and glassy phases.

CO2 Entropy Depletion-induced 2D Amorphous Structure in Non-van der Waals VO2.

Few studies focus on the plastic deformations of inorganic semiconductors because they are usually brittle and do not deform easily. Here, a peculiar internal shear stress originated from the entropy deletion of CO2 in the tunnels of non-van der Waals VO2 crystal, is employed to introduce hierarchical plastic deformations, including dislocations, point vacancies, twins, and amorphous bands. The strength of such stress field increases by more than three orders of magnitude compared to that of external experimental CO2 pressure. We further demonstrate that 2D amorphous structures can be obtained by the synergetic effect of hierarchical deformations in 3D crystal.