The effect and mechanism of liraglutide on the biological functions of BMSCs in diabetic patients.

OBJECTIVES: To investigate the effect of liraglutide on osteogenesis in human alveolar bone marrow mesenchymal stem cells (BMSCs) and the influence of liraglutide on implant-bone integration in rats with T2DM. SUBJECTS AND METHODS: Extracting BMSCs from the alveoli of diabetic patients treated with insulin. BMSCs were treated with different concentrations of liraglutide. Osteogenesis and the underlying mechanism were investigated via ALP detection, ALP staining, Alizarin Red S staining, Western blotting, and RT-PCR. Liraglutide was given to Wistar and GK rats after implantation, and new bone formation around the implants was analyzed via micro-CT. Implant-bone integration in rats was investigated via toluidine blue staining. RESULTS: Liraglutide enhanced osteogenesis in BMSCs via the BMP2/Smad/Runx2 signaling pathway. The optimal concentration of liraglutide that promoted osteogenesis was 10-8 mol/L. At concentrations higher than 10-7 mol/L, liraglutide had a negative effect on BMSCs. At a concentration of 10-8 mol/L liraglutide, BMSCs and diabetes mellitus-bone marrow stromal cells (DM-BMSCs) showed optimal osteogenesis. Liraglutide promoted implant-bone integration and new bone formation in Wistar and GK rats. CONCLUSIONS: Liraglutide not only promotes osteogenesis of BMSCs in normoglycemic individuals but also enhances osteogenesis of BMSCs in diabetic patients treated with insulin and enhances osseointegration in rats.

Probing the Influence of Hybrid Thread Design on Biomechanical Response of Dental Implants: Finite Element Study and Experimental Validation.

This study aimed to perform quantitative biomechanical analysis for probing the effect of varying thread shapes in an implant for improved primary stability in prosthodontics surgery. Dental implants were designed with square (SQR), buttress (BUT), and triangular (TRI) thread shapes or their combinations. Cone-beam computed tomography images of mandible molar zones in human subjects belonging to three age groups were used for virtual implantation of the designed implants, to quantify patient-specific peri-implant bone microstrain, using finite element analyses. The in silico analyses were carried out considering frictional contact to simulate immediate loading with a static masticatory force of 200 N. To validate computational biomechanics results, compression tests were performed on three-dimensional printed implants having the investigated thread architectures. Bone/implant contact areas were also quantitatively assessed. It was observed that, bone/implant contact was maximum for SQR implants followed by BUT and TRI implants. For all the cases, peak microstrain was recorded in the cervical cortical bone. The combination of different thread shapes in the middle or in the apical part (or both) was demonstrated to improve peri-implant microstrain, particularly for BUT and TRI. Considering 1500-2000 microstrain generates in the peri-implant bone during regular physiological functioning, BUT-SQR, BUT-TRI-SQR, TRI-SQR-BUT, SQR, and SQR-BUT-TRI design concepts were suitable for younger; BUT-TRI-SQR, BUT-SQR-TRI, TRI-SQR-BUT, SQR-BUT, SQR-TRI for middle-aged, and BUT-TRI-SQR, BUT-SQR-TRI, TRI-BUT-SQR, SQR, and SQR-TRI for the older group of human patients.

Semaphorin3A promotes osseointegration of titanium implants in osteoporotic rabbits.

OBJECTIVE: In the present study, we intend to assess the function of Sema3A in osteointegration of titanium implants both in vivo and in vitro. MATERIAL AND METHODS: Briefly, Sema3A was transfected in HBMSCs cells to detect its effect on osteogenesis. Subsequently, an in vivo rabbit model was established. Eighteen female rabbits were randomly assigned into three groups (n=6), and rabbits in the two treatment groups (OVX groups) were subjected to bilateral ovariectomy, while those in the control group were treated with sham operation. Twelve weeks later, we first examined expression levels of Sema3A in rabbits of the three groups. Titanium implants were implanted in rabbit proximal tibia. Specifically, rabbits in sham group were implanted with Matrigel, while the remaining in the OVX experimental group (OVX+Sema3A group) and OVX group were implanted with Matrigel containing Sema3A adeno-associated virus or empty vector, respectively. RESULTS: Histomorphometry results uncovered that rabbits in the OVX+Sema3A group had a significantly higher BIC compared with those of the OVX group on the 12th week of post-implantation. And compared with the OVX group, the maximum push-out force increased by 89.4%, and the stiffness increased by 39.4%, the toughness increased by 63.8% in the OVX+Sema3A group at 12 weeks. CONCLUSION: Sema3A has a positive effect on promoting early osseointegration of titanium implants in osteoporotic rabbits. CLINICAL RELEVANCE: Our research found that Sema3A can improve the osteogenic ability of bone marrow stem cells and promotes osseointegration during osteoporosis.

Mixed oxide nanotubes in nanomedicine: A dead-end or a bridge to the future?

Nanomedicine has seen a significant rise in the development of new research tools and clinically functional devices. In this regard, significant advances and new commercial applications are expected in the pharmaceutical and orthopedic industries. For advanced orthopedic implant technologies, appropriate nanoscale surface modifications are highly effective strategies and are widely studied in the literature for improving implant performance. It is well-established that implants with nanotubular surfaces show a drastic improvement in new bone creation and gene expression compared to implants without nanotopography. Nevertheless, the scientific and clinical understanding of mixed oxide nanotubes (MONs) and their potential applications, especially in biomedical applications are still in the early stages of development. This review aims to establish a credible platform for the current and future roles of MONs in nanomedicine, particularly in advanced orthopedic implants. We first introduce the concept of MONs and then discuss the preparation strategies. This is followed by a review of the recent advancement of MONs in biomedical applications, including mineralization abilities, biocompatibility, antibacterial activity, cell culture, and animal testing, as well as clinical possibilities. To conclude, we propose that the combination of nanotubular surface modification with incorporating sensor allows clinicians to precisely record patient data as a critical contributor to evidence-based medicine.

Computed tomography assessment of maxillary bone density for orthodontic mini-implant placement with respect to vertical growth patterns.

OBJECTIVE: To quantitatively measure and report bone density of maxilla in the interradicular (alveolar and basal bone) and infrazygomatic crest (IZC) region in various growth patterns among Dravidian individuals. DESIGN: This was a retrospective spiral computed tomography (CT) study. SETTING: The study was conducted at the Department of Orthodontics, Saveetha Dental College and Hospital, Tamil Nadu, India. METHODS: Sixty CT scans (24 men, 36 women; mean age = 25.3 years and 23.8 years, respectively) divided equally into three groups based on vertical facial proportions were included. Bone density measurements in Hounsfield units (HU) were performed using Philips and RadiAnt DICOM viewers. Buccal cortical, palatal cortical and cancellous bone regions were analysed in a Philips DICOM viewer and IZC region was analysed in a RadiAnt DICOM viewer. Statistical analysis with one-way ANOVA and post-hoc Tukey HSD test was done. RESULTS: The hypodivergent group had a significantly higher bone density at the buccal cortex in posterior region (P < 0.05) when compared to the normodivergent and hyperdivergent groups. Buccal basal bone was denser than buccal alveolar bone (P < 0.05) in all three groups. In the IZC region, hypodivergent groups had significantly higher density values when compared to the normodivergent and hyperdivergent groups (P < 0.05). CONCLUSION: The present study concluded that cancellous bone density in the interradicular regions was greatest in the anterior sites and was not influenced by growth pattern. Hypodivergent groups tend to have higher density in the posterior regions (buccal and palatal cortical bone) and at the IZC region compared to normodivergent and hyperdivergent groups.

Role of TiO2 Nanotubes on the Surface of Implants in Osseointegration in Animal Models: A Systematic Review and Meta-Analysis.

PURPOSE: This systematic review and meta-analysis aims to synthesize evidence relating to the effects of TiO2 nanotubes on osseointegration in animal models. MATERIALS AND METHODS: The focused question was "Does the preparation of TiO2 nanotubes on the surface of implants enhance osseointegration?" Searches were performed for relevant manuscripts up to September 2019 using the PubMed, Embase, Scopus and Google Scholar databases with terms such as "TiO2 nanotubes" in combination with "osseointegration", "osteogenic", "osteogenesis", and "bone regeneration". The titles, abstracts and full texts of the manuscripts were reviewed in accordance with the eligibility criteria. The meta-analysis were then performed to analyze the effects of TiO2 nanotubes in bone-implant contact (BIC) and biomechanical tests. RESULTS: Fourteen manuscripts were included for the systematic review and meta-analysis. Eleven studies showed that the results of a histological analysis, micro-CT evaluation and biomechanical tests were significantly higher near TiO2 than titanium. The meta-analysis demonstrating similar results in the BIC and biomechanical tests were obtained. The selected studies also showed the preferable nanotube diameter (70, 80, or 100 nm) to enhance osseointegration in BIC and/or bone area (BA). CONCLUSION: TiO2 nanotubes, especially those with large diameters, enhanced osseointegration near titanium implants. Compared to bare nanotubes, TiO2 nanotube composite coatings resulted in higher osteogenic ability.

Does high fat diet effect the bone-implant connection?

OBJECTIVE: Obesity induced by a high fat diet is associated with chronic up-regulation of inflammatory cytokines which stimulate osteoclast activity and bone resorption. However, the role of high-fat diet on bone-implant connectivity has not been studied in detail. In this study, we investigated whether a high-fat diet (HFD) affects bone implant connection (BIC) in periimplant bone. METHODS: Twenty female Sprague Dawley rats were divided in two groups: 1) Control rats were fed with normal chow and titanium implants were integrated into tibial bones at the end of 3rd month and no treatment was applied 2) HFD group; rats were fed a high-fat diet (42 % of calories as fat), then the titanium implants were integrated into tibial bones at the end 3rd month. Following surgical integration of the implants, the rats were fed with control and HFD diets for 3 months. After the 6 months experimental period all rats were sacrificed and the implants and surrounded bone tissues were collected and the BIC was assessed histomorphometrically after the non-decalcifiing histological methods. Bone implant connection was detected with the ratio of the implant surface directly connected with the peri-implant bone tissues to the total implant surface length. RESULTS: Histologic analysis showed that HFD was not impaired BIC (p>0.05). CONCLUSION: In conclusion, within the limitation of this research, HFD did not effect the BIC rat tibias (Tab. 2, Fig. 2, Ref. 26). Text in PDF www.elis.sk.

Socket preservation with demineralized freeze-dried bone allograft and platelet-rich fibrin for implant site development: A randomized controlled trial.

AIM: This in vivo study compared clinical, histological, and radiological differences in bone formation in human extraction sockets grafted with demineralized freeze-dried bone allograft (DFDBA) and platelet-rich fibrin (PRF), with nongrafted sockets and bone-implant contact (BIC) at 3 and 6 months after implant placement. SETTINGS AND DESIGN: Randomised controlled trial. MATERIALS AND METHODS: The study comprised thirty posterior teeth sockets in either arch in patients ranging from 25 to 60 years. The patients were divided into two equal groups - Group I: control group wherein no graft was placed and the extraction socket was left to heal normally and Group II: test group in which DFDBA and PRF were placed after extraction. 12-16 weeks after extraction, a trephine biopsy was done just prior to implant placement, followed by implant placement. Cone-beam computed tomography (CBCT) at 3 and 6 months after implant placement was done to assess BIC. STATISTICAL ANALYSIS USED: Descriptive and Inferential statistical analysis was done. Parametric test: Independent t-test was used for intergroup analysis and dependent t-test for intra-group analysis. RESULTS: Lower buccal bone levels were seen in the control group versus test group at all intervals though moderately significant. Lingual bone levels significantly reduced at all the three intervals for the control group as compared to the test group. Ridge width in both groups reduced in a time span of 6-7 months without any significant difference. Better bone conversion was noted in the preserved sockets. The preserved sockets also showed better BIC 3 months after implant placement and loading. CONCLUSION: Indigenously developed DFDBA material shows promising results as an osteoinductive material.

Influence of mini-screw diameter and loading conditions on static and dynamic assessments of bone-implant contact: An animal study.

OBJECTIVES: The goal was to compare static versus dynamic bone-implant interface histology of mini-screws and to evaluate its relation to diameter and load. SETTING AND SAMPLE POPULATION: Canine animal model. MATERIAL AND METHODS: Custom-machined, titanium alloy (Ti6AI4V) mini-screws (n = 70) of 1.60, 2.00, 3.00 and 3.75 mm diameter were placed into edentulous sites in five skeletally mature beagle dogs. Using a split-mouth design, no load (NL) was applied to one side while a 2N load (L) was applied by calibrated coil springs on the other side. Intravenous bone labels were administered 21 and 7 days prior to sacrifice. Dogs were euthanized 90 days after screw placement. Bone sections were analysed under bright-field and epifluorescent light. The region of interest was defined as the bone within the threads of the screws. The following parameters were quantified: (a) Static-bone volume/tissue volume (BV/TV %) and bone-implant contact (BIC, %); (b) Dynamic-labelled bone/bone volume (LB/BV, %), and dynamic BIC (DBIC, %). RESULTS: BV/TV ranged from 71.2% to 85.0% of the screw surface. BIC ranged from 45.7% to 55.4% of the screw surface and was not affected by diameter (P = 0.66). In contrast, the percentage of DBIC did not vary with the applied load (P = 0.41); however, it correlated significantly with the diameter of the screw (P = 0.001). CONCLUSION: The percentage of DBIC that is actively remodelling increases with increasing diameter of the screw. Dynamic histomorphometry is more sensitive to detecting changes in bone-implant contact when compared to static measurements.

Biomimetic Surfaces Coated with Covalently Immobilized Collagen Type I: An X-Ray Photoelectron Spectroscopy, Atomic Force Microscopy, Micro-CT and Histomorphometrical Study in Rabbits.

BACKGROUND: The process of osseointegration of dental implants is characterized by healing phenomena at the level of the interface between the surface and the bone. Implant surface modification has been introduced in order to increase the level of osseointegration. The purpose of this study is to evaluate the influence of biofunctional coatings for dental implants and the bone healing response in a rabbit model. The implant surface coated with collagen type I was analyzed through X-ray Photoelectron Spectroscopy (XPS), Atomic Force Microscopy (AFM), micro-CT and histologically. METHODS: The sandblasted and double acid etched surface coated with collagen type I, and uncoated sandblasted and double acid etched surface were evaluated by X-ray Photoelectron Spectroscopy (XPS) and Atomic Force Microscopy (AFM) analysis in order evaluate the different morphology. In vivo, a total of 36 implants were positioned in rabbit articular femoral knee-joint, 18 fixtures for each surface. Micro-CT scans, histological and histomorphometrical analysis were conducted at 15, 30 and 60 days. RESULTS: A histological statistical differences were evident at 15, 30 and 60 days (p < 0.001). Both implant surfaces showed a close interaction with newly formed bone. Mature bone appeared in close contact with the surface of the fixture. The AFM outcome showed a similar roughness for both surfaces. CONCLUSION: However, the final results showed that a coating of collagen type I on the implant surface represents a promising procedure able to improve osseointegration, especially in regions with a low bone quality.

Effects on the osseointegration of titanium implants incorporating calcium-magnesium: a resonance frequency and histomorphometric analysis in rabbit tibia.

OBJECTIVE: This study assessed the bone formation around titanium surface incorporating the calcium-magnesium (CaMg) deposited by blasted in rabbit tibia bone to determine whether this surface would further enhance bone healing compared with commercially available implant surface. MATERIAL AND METHODS: The deposition of CaMg on the titanium SLA surface were obtained by blasting formed the experimental group (EX group), while implants with traditional SLA surface were used as control group (CO group), in this study. Fifty cylindrical threaded implants with a length of 8 mm were used (P = 25 per group). Five implants of each group were used to surface characterization by scanning electron microscopy, energy dispersive spectrometry, and optical profilometry. Ten New Zealand white rabbits received 40 implants (n = 20 per group). Resonance frequency analysis was performed three times (0, 4, and 6 weeks). Histomorphometric analysis was performed 4 and 6 weeks after implantation. Statistical significance was set at P < 0.05. RESULTS: Blasted CaMg deposition on SLA implant surface displayed almost identical surface morphologies and R(a) values at the micron scale. In comparing the implant stability quotient at the three time points, highly significant statistic differences were found (P < 0.001). Histomorphological analysis showed higher degrees of bone organization in the samples of test implant surfaces at both implantation times. CONCLUSION: Within the limitations of this study, the results indicate that the deposition of CaMg on the SLA titanium surface may be effective in enhancing the osseointegration of moderately rough grit-blasted implants by increasing the degree of bone-implant contact.

Comparative 3D micro-CT and 2D histomorphometry analysis of dental implant osseointegration in the maxilla of minipigs.

AIM: The bone implant contact (BIC) has traditionally been evaluated with histological methods. Thereupon, strong correlations of two-dimensional (2D) BIC have been detected between µCT and destructive histology. However, due to the high intra-sample variability in BIC values, one histological slice is not sufficient to represent 3D BIC. Therefore, our aim has been to correlate the averaged values of 3-4 histological sections to 3D µCT. MATERIAL AND METHODS: Fifty-four implants inserted into the maxilla of 14 minipigs were evaluated. Two different time points were selected to assess the 3D BIC (distance to implant: 2-5 voxels), an inner ring (6-30 voxels) and an outer ring (55-100 voxels) using µCT (voxel size: 10 µm) and to correlate the values to histomorphometry. RESULTS: Strong correlations (p < 0.0001; 28 days, 56 days, total) were seen between µCT and histomorphometry concerning BIC (r = 0.84, r = 0.85, r = 0.83), the inner ring (r = 0.87, r = 0.87, r = 0.88) and the outer ring (r = 0.85, r = 0.85, r = 0.88). Closer to the implant, µCT values were higher compared with histomorphometry. CONCLUSION: Although 3-4 histological slices per implant seem to predict the 3D BIC, µCT might be advantageous because of its non-destructive 3D character. The healing time may not impact on the comparability.

Influence of platelet-derived growth factor on osseous remodeling properties of a variable-thread tapered dental implant in vivo.

OBJECTIVES: To evaluate the effect of platelet-derived growth factor (rhPDGF-BB) on the promotion of osteogenesis around variable-thread tapered implants in an animal model. MATERIAL AND METHODS: Twenty-four variable-thread tapered implants were inserted in the tibia of 12 rabbits. Twelve sites received additional rhPDGF-BB released from a presoaked xenogenic bone block that was fixed supracrestally. Primary outcomes were bone-to-implant contact (BIC; in % ± SD) and percentage of medullary bone fill around the implants (PMF; in % ± SD) after 3 weeks (PDGF n = 6, no PDGF n = 6) and 6 weeks (PDGF n = 6, no PDGF n = 6). RESULTS: Considerable crestal and medullary bone remodeling could be found around all implants. After 3 weeks, both BIC and PMF values were higher in the no PDGF group (BIC: 63% ± 10 with PDGF vs. 85% ± 5 with no PDGF; PMF: 57% ± 10 with PDGF vs. 74% ± 4 with no PDGF). After 6 weeks, the BIC difference between the two groups was less distinct (BIC: 78% ± 17 with PDGF vs. 72% ± 25 with no PDGF), whereas the PDGF group showed higher PMF values (PMF: 77% ± 5 with PDGF vs. 56% ± 10 with no PDGF). CONCLUSIONS: The addition of rhPDGF-BB decreases early osseous crestal and medullar healing properties around dental implants. In a later phase, an increase in the cortical area as well as an increased medullar bone formation was seen. This response is likely to provide stronger secondary stability and stability in suboptimal situations involving poor-quality bone.

Exploring for the optimal structural design for the 3D-printing technology for cranial reconstruction: a biomechanical and histological study comparison of solid vs. porous structure.

PURPOSE: Cranioplasty for recovering skull defects carries the risk for a number of complications. Various materials are used, including autologous bone graft, metallic materials, and non-metallic materials, each of which has advantages and disadvantages. If the use of autologous bone is not feasible, those artificial materials also have constraints in the case of complex anatomy and/or irregular defects. MATERIAL AND METHODS: This study used metal 3D-printing technology to overcome these existing drawbacks and analyze the clinical and mechanical performance requirements. To find an optimal structure that satisfied the structural and mechanical stability requirements, we evaluated biomechanical stability using finite element analysis (FEA) and mechanical testing. To ensure clinical applicability, the model was subjected to histological evaluation. Each specimen was implanted in the femur of a rabbit and was evaluated using histological measurements and push-out test. RESULTS AND CONCLUSION: We believe that our data will provide the basis for future applications of a variety of unit structures and further clinical trials and research, as well as the direction for the study of other patient-specific implants.

Correlation between resonance frequency, insertion torque and bone-implant contact in self-cutting threaded implants.

The aim of this study was to evaluate the correlation between resonance frequency analysis (RFA) values and the histomorphometric bone-implant contact (BIC) immediately after insertion of the implant. Additionally, it was examined to define which extent peak insertion torque (PIT) was correlated with the latter measurements. 15 Xive® S plus root from dental implants were inserted in fresh porcine frontal bones. The insertion torque was measured with the Kavo Intrasurg 300 surgical unit. RFA connector was coupled to the implants and the mean value of 20 consecutive RFA measurements was calculated via Osstell® ISQ device. The implants were removed with the adjacent bone with a band saw. The blocks were processed for undecalcified histology. Two perpendicular longitudinal middle sections of the implant were made and stained with toluidine blue and the BIC was assessed by histomorphometry. The correlation coefficient (Spearman) between RFA and BIC was R = 0.579 (p = 0.026, F test). The correlation between PIT and BIC (0.33, p > 0.05) and PIT and RFA (0.153, p > 0.05) was not statistically significant. The present data confirmed a moderate and statistically positive correlation between RFA and BIC. No correlation between BIC and PIT and PIT and RFA was observed. Further studies considering different bone qualities would be beneficial in understanding the relation between RFA and BIC.

Bone reactions around dental implants subjected to progressive static load: an experimental study in dogs.

OBJECTIVE: To evaluate histologically and histomorphometrically, the peri-implant bone reaction around implants subjected to controlled progressive orthodontic loading. MATERIALS AND METHODS: In three beagle dogs, bilateral edentulous flat alveolar ridges were created in the maxillary area posterior to the canines. After 8 weeks of healing, 24 implants (Biomet 3i) were inserted in the edentulous sites. Two experimental groups were created. Progressive loading group: Twelve implants were left to heal for 8 weeks uncovered, and abutments were adapted and connected by pairs with Ni-Ti orthodontic springs. A gradual static force of 100, 200 and 300 g was applied for a 3-week period each. Thus, a total progressive loading period of 9 weeks was exercised. Unloaded control group: Twelve implants were left to heal undisturbed. At the end of the experimental period, all implants of both groups were removed with the surrounding bone. Histologic and histomorphometric analyses were performed, and the following parameters were measured: bone-to-implant contact, bone density 1 and 2 mm distant to the implant threads and crestal bone resorption. Median regression models are used for statistical analysis. RESULTS: Implants of the progressive loading group exhibited significantly higher percentage of bone-to-implant contact compared to the unloaded control implants (P = 0.018). Bone density 1 and 2 mm distant to the threads was found to be the same between the two groups (P = 0.734 and P = 0.961, respectively). Crestal bone resorption did not differ between loaded and unloaded implants (P = 0.813). CONCLUSION: The application of progressive loading by controlled orthodontic force on osseointegrated implants provoked significant increase in the percentage of bone-to-implant contact of the low-density bone of the dog maxilla.

Resolution, sensitivity, and in vivo application of high-resolution computed tomography for titanium-coated polymethyl methacrylate (PMMA) dental implants.

OBJECTIVES: The aims of this study were (i) to determine the spatial resolution and sensitivity of micro- versus nano-computed tomography (CT) techniques and (ii) to validate micro- versus nano-CT in a dog dental implant model, comparative to histological analysis. MATERIAL AND METHODS: To determine spatial resolution and sensitivity, standardized reference samples containing standardized nano- and microspheres were prepared in polymer and ceramic matrices. Thereafter, 10 titanium-coated polymer dental implants (3.2 mm in Ø by 4 mm in length) were placed in the mandible of Beagle dogs. Both micro- and nano-CT, as well as histological analyses, were performed. RESULTS: The reference samples confirmed the high resolution of the nano-CT system, which was capable of revealing sub-micron structures embedded in radiodense matrices. The dog implantation study and subsequent statistical analysis showed equal values for bone area and bone-implant contact measurements between micro-CT and histology. However, because of the limited sample size and field of view, nano-CT was not rendering reliable data representative of the entire bone-implant specimen. CONCLUSIONS: Micro-CT analysis is an efficient tool to quantitate bone healing parameters at the bone-implant interface, especially when using titanium-coated PMMA implants. Nano-CT is not suitable for such quantification, but reveals complementary morphological information rivaling histology, yet with the advantage of a 3D visualization.

Translational mini-screw implant research.

It is important to thoroughly test new materials as well as techniques when these innovations are to be utilized in the human clinical situation. Translational research fills this important niche. The purpose of translational research is to establish the continuity of evidence from the laboratory to the clinic and in so-doing, provide evidence that the material is functioning appropriately and that the process in the human will be successful. This concept applies to the mini-screw implant; which, has been very successfully introduced into the orthodontic armamentarium over the last decade for application as a temporary anchorage device. The examples of translational research that will be illustrated in this paper have paved the way to ensure that clinicians have evidence to confidently utilize mini-screw implants in orthodontic practice. Needless to say, more studies are needed to ensure a safe, effective and efficient manner to practice orthodontics.

Study on Osseointegration Capability of ß-Type Ti-Nb-Zr-Ta-Si Alloy for Orthopedic Implants.

Osseointegration is the basic condition for orthopedic implants to maintain long-term stability. In order to achieve osseointegration, a low elastic modulus is the most important performance indicator. It is difficult for traditional titanium alloys to meet this requirement. A novel ß-titanium alloy (Ti-35Nb-7Zr-5Ta)98Si2 was designed, which had excellent strength (a yield strength of 1296 MPa and a breaking strength 3263 MPa), an extremely low elastic modulus (37 GPa), and did not contain toxic elements. In previous in vitro studies, we confirmed the good biocompatibility of this alloy and similar bioactivity to Ti-6Al-4V, but no in vivo study was performed. In this study, Ti-6Al-4V and (Ti-35Nb-7Zr-5Ta)98Si2 were implanted into rabbit femurs. Imaging evaluation and histological morphology were performed, and the bonding strength and bone contact ratio of the two alloys were measured and compared. The results showed that both alloys remained in their original positions 3 months after implantation, and neither imaging nor histological observations found inflammatory reactions in the surrounding bone. The bone-implant contact ratio and bonding strength of (Ti-35Nb-7Zr-5Ta)98Si2 were significantly higher than those of Ti-6Al-4V. The results confirmed that (Ti-35Nb-7Zr-5Ta)98Si2 has a better osseointegration ability than Ti-6Al-4V and is a promising material for orthopedic implants.

3-D finite element model of the impaction of a press-fitted femoral stem under various biomechanical environments.

BACKGROUND: Uncemented femoral stem insertion into the bone is achieved by applying successive impacts on an inserter tool called "ancillary". Impact analysis has shown to be a promising technique to monitor the implant insertion and to improve its primary stability. METHOD: This study aims to provide a better understanding of the dynamic phenomena occurring between the hammer, the ancillary, the implant and the bone during femoral stem insertion, to validate the use of impact analyses for implant insertion monitoring. A dynamic 3-D finite element model of the femoral stem insertion via an impaction protocol is proposed. The influence of the trabecular bone Young's modulus (Et), the interference fit (IF), the friction coefficient at the bone-implant interface (µ) and the impact velocity (v0) on the implant insertion and on the impact force signal is evaluated. RESULTS: For all configurations, a decrease of the time difference between the two first peaks of the impact force signal is observed throughout the femoral stem insertion, up to a threshold value of 0.23 ms. The number of impacts required to reach this value depends on Et, v0 and IF and varies between 3 and 8 for the set of parameters considered herein. The bone-implant contact ratio reached after ten impacts varies between 60% and 98%, increases as a function of v0 and decreases as a function of IF, µ and Et. CONCLUSION: This study confirms the potential of an impact analyses-based method to monitor implant insertion and to retrieve bone-implant contact properties.