Study on the quality difference between raw and ginger juice processed Magnoliae officinalis cortex by UPLC-Q-TOF-MS/MS and GC-MS coupled with color measurement.

INTRODUCTION: Magnoliae officinalis cortex (MOC) has been used for thousands of years as a traditional Chinese herb. In Chinese Pharmacopoeia (2020 edition), it has two types of decoction pieces, raw Magnoliae officinalis cortex (RMOC) and ginger juice processed Magnoliae officinalis cortex (GMOC). The quality difference between RMOC and GMOC has not been explored systemically. OBJECTIVE: This study aimed to discover the quality difference between RMOC and GMOC, and clarify the effect of ginger juice during processing comprehensively. METHODS: Ultra-performance liquid chromatography coupled with quadrupole time-of-flight tandem mass spectrometry (UPLC-Q-TOF-MS/MS) and gas chromatography-mass spectrometry (GC-MS) were applied to study the non-volatile and volatile components of RMOC and GMOC; electronic eye was applied for color measurement. Meanwhile, water processed Magnoliae officinalis cortex (WMOC) was studied as the blank sample. RESULTS: There were 155 non-volatile and 72 volatile substances identified. Between RMOC and GMOC, 29 distinctive non-volatile and 34 distinctive volatile compounds were detected, among which 23 new compounds appeared and five compounds disappeared due to the addition of ginger juice during processing. The intensities of 12 common non-volatile compounds and the relative percentage contents of four common volatile compounds showed significant differences between RMOC and GMOC. In color measurement of RMOC, GMOC, and WMOC, 14 common compounds with significant differences were discovered related to their color values, and their mathematical prediction functions were built. CONCLUSION: There were significant differences between RMOC and GMOC; the processing mechanism of GMOC would be carried out based on the differential compounds in further investigation.

Composite "Crosslinked Polyvinyl Alcohol-Magnetite" as a Stimuli-Responsive Matrix for Optical Methods.

The preparation and application of the composite material "crosslinked polyvinyl alcohol-magnetite" as a sensitive matrix for use in digital colorimetry and optical micrometry methods are discussed. The material was synthesized in the form of spherical granules (for micrometry) and thin films (for digital colorimetry). The obtained composites were characterized by the registration of magnetization curves. It was shown that the amount of grown Fe3O4 particles in the polymer gel is in linear dependence with the iron salt concentrations in the impregnating solutions. The composite granules were applied to determining monosaccharides using optical micrometry. The optimal pH value for the total amount of monosaccharides' determination was 8.6. The study of the analytical response of composite granules and films performed with a low limit of detection (7.9 mmol/dm3) of both glucose and fructose and a possibility of the control of high alcohol contention in water media. The granules were used to determine the total carbohydrate content in samples of natural honey and syrups with high fructose contents, while the films were used to control the alcohol content in hand antiseptics. The results obtained are in good agreement with the data provided by the manufacturers.

Harmonizing color measurements in dentistry using translucent tooth-colored materials.

BACKGROUND: Since color measurements are relative, the discrepancy among different instruments is alarmingly high. This multicenter study evaluated the effectiveness of instrument calibration and inter-instrument harmonization of different spectrophotometers with the same optical geometry using tooth-colored, translucent dental materials. METHODS: The coordinating center (CC) spectrophotometer was calibrated using the NPL Ceram Series II set. Two sets of 10 specimens, labeled 1 to 10 and I to X (10 mm in diameter and 1 mm thick), were tested at CC and three research sites (RS1, RS2, and RS3) using the same d/8° optical geometry spectrophotometers. Calibration factors were calculated for each material and site to obtain the average calibration factors for sets 1-10, set I-X, and the combination of both. The differences among the non-corrected and corrected reflection values were calculated using CIEDE2000 (DeltaE00) and CIELAB (DeltaEab) color difference formulas and were submitted to ANOVA and Tukey test (α = 0.05). RESULTS: A significant decrease of color differences between non-corrected as compared to corrected measurements was recorded for all CC-RS and RS-RS comparisons. The reduction of DeltaE00 values between non-corrected and corrected for CC-RS1, CC-RS2, and CC-RS3 were 83.1%, 77.2%, and 73.6%, respectively. The corresponding DeltaE00 values for RS1-RS2, RS1-RS3, and RS2-RS3 comparisons, indirectly compared in the experiment, were 84.2%, 82.8%, and 68.5%, respectively. There was a significant reduction of DeltaE00 and DeltaEab color difference for all combined RS pairs and each of three RS pairs, corrected with one of two specimen sets calibration factors separately. CONCLUSIONS: Calibration and harmonization of color measurements in dentistry using tooth-colored, translucent restorative materials significantly decreased measurement discrepancies between the coordinating center and research sites and among pairs of research sites.

Repeatability of different mobile phone applications for color measurement in dentistry.

PURPOSE: To assess the repeatability of various color-measuring mobile phone applications (MPAs) on dental materials in clinically relevant shades in 1-mm thickness. MATERIALS AND METHODS: A benchtop spectrophotometer was used as a reference instrument. Seven MPAs were used: Color Analysis, Color Analyzer-Iro Shirabe, Color Grab, and Colorimeter from Android, and Color Analyzer-Iro Shirabe, ColorMeter RGB, and Optishade from iOS. Color measurements were performed on 1-mm thickness slices of CAD-CAM materials, Vita Enamic shades 1M2, 2M2, 3M2, 4M2, and Vitablocs Mark II shades A1C, A2C, A3C, A4C (n = 10, for a total 80 specimens). The specimens were measured at three time periods, Day 0, Day 1, and Day 7, and three measurements were made on each day, to mimic short-, medium-, and long-term repeatability. The color differences were analyzed using the CIEDE2000 formula, with the corresponding color difference (ΔE00), and mean color difference from the mean (MCDM00). One-way ANOVA, Repeated measures ANOVA, and Paired sample t-tests were used for statistical analysis. RESULTS: Optishade from iOS showed the lowest mean color difference among the MPAs (ΔE00 = 0.2 (SD 0.1), 0.3 (SD 0.2), and 0.2 (SD 0.1) at Day 0, 1, and 7, respectively, and ΔE00 = 0.5 (SD 0.3) for all three periods Days 0-1, 0-7, and 1-7). Material-dependent variations in the repeatability of color measurements were observed. CONCLUSION: There was a statistically significant difference among color measurements using MPAs and a spectrophotometer, among the MPAs, and materials. The spectrophotometer exhibited the highest repeatability across the tested time periods. The iOS Optishade showed the highest repeatability among the MPAs.

Customized Integrating-Sphere System for Absolute Color Measurement of Silk Cocoon with Corrugated Microstructure.

Silk fiber, recognized as a versatile bioresource, holds wide-ranging significance in agriculture and the textile industry. During the breeding of silkworms to yield new varieties, optical sensing techniques have been employed to distinguish the colors of silk cocoons, aiming to assess their improved suitability across diverse industries. Despite visual comparison retaining its primary role in differentiating colors among a range of silk fibers, the presence of uneven surface texture leads to color distortion and inconsistent color perception at varying viewing angles. As a result, these distorted and inconsistent visual assessments contribute to unnecessary fiber wastage within the textile industry. To solve these issues, we have devised an optical system employing an integrating sphere to deliver consistent and uniform illumination from all orientations. Utilizing a ColorChecker, we calibrated the RGB values of silk cocoon images taken within the integrating sphere setup. This process accurately extracts the authentic RGB values of the silk cocoons. Our study not only helps in unraveling the intricate color of silk cocoons but also presents a unique approach applicable to various specimens with uneven surface textures.

Approaches to minimize tooth staining associated with silver diamine fluoride: A systematic review.

OBJECTIVE: To the effectiveness of different strategies to overcome silver diamine fluoride (SDF)-mediated tooth staining. MATERIALS AND METHODS: Four online databases (PubMed, ScienceDirect, Scopus, and Web of Science) were searched using different MeSH terms and Boolean Operators to retrieve the articles (until June 2021), followed by a hand-search of the reference list of the included articles. All full-text, original studies in English that evaluated SDF staining and at least one SDF modification/alternative were included. RESULTS: Among the assessed studies, nine studies explored the stain-minimization effect of potassium iodide (KI) post-application following SDF treatment. Among these, eight concluded that KI application after SDF treatment significantly reduced tooth staining, while one showed marginal staining following glass ionomer restoration of the SDF-treated dentine. Additionally, one study applied potassium fluoride (KF) and silver nitrate (AgNO3 ) concurrently to mitigate SDF-mediated staining. One study compared SDF staining with polyethylene glycol (PEG)-coated nanoparticles containing sodium fluoride (NaF), and another used nanosilver fluoride (NSF) for staining comparison with SDF. CONCLUSIONS: Within the limitations of this study, the addition of different materials to SDF has proven to be a beneficial strategy for overcoming tooth staining associated with SDF. Future studies are warranted, particularly clinical trials, to validate these findings. CLINICAL SIGNIFICANCE: SDF-mediated tooth staining is a serious concern that limits its clinical use. A review of various strategies to overcome this problem will help clinicians enhance its clinical use and patient acceptance.

Nature's palette: An emerging frontier for coloring dairy products.

Consumers all across the world are looking for the most delectable and appealing foods, while also demanding products that are safer, more nutritious, and healthier. Substitution of synthetic colorants with natural colorants has piqued consumer and market interest in recent years. Due to increasing demand, extensive research has been conducted to find natural and safe food additives, such as natural pigments, that may have health benefits. Natural colorants are made up of a variety of pigments, many of which have significant biological potential. Because of the promising health advantages, natural colorants are gaining immense interest in the dairy industry. This review goes over the use of various natural colorants in dairy products which can provide desirable color as well as positive health impacts. The purpose of this review is to provide an in-depth look into the field of food (natural or synthetic) colorants applied in dairy products as well as their potential health benefits, safety, general trends, and future prospects in food science and technology. In this paper, we listed a plethora of applications of natural colorants in various milk-based products.

Effect of peri-implant mucosal thickness on esthetic outcomes and the efficacy of soft tissue augmentation procedures: Consensus report of group 2 of the SEPA/DGI/OF workshop.

OBJECTIVES: The aim of this study was to comprehensively assess the literature in terms of the effect of peri-implant mucosal thickness on esthetic outcomes and the efficacy of soft tissue augmentation procedures to increase the mucosal thickness with autogenous grafts or soft tissue substitutes. MATERIAL AND METHODS: Two systematic reviews (SR) were performed prior to the consensus meeting to assess the following questions. Review 1, focused question: In systemically healthy patients with an implant-supported fixed prosthesis, what is the influence of thin as compared to thick peri-implant mucosa on esthetic outcomes? Review 2, focused question 1: In systemically healthy humans with at least one dental implant (immediate or staged implant), what is the efficacy of connective tissue graft (CTG), as compared to absence of a soft tissue grafting procedure, in terms of gain in peri-implant soft tissue thickness (STT) reported by randomized controlled clinical trials (RCTs) or controlled clinical trials (CCTs)? Review 2, focused question 2: In systemically healthy humans with at least one dental implant (immediate or staged implant), what is the efficacy of CTG, as compared to soft tissue substitutes, in terms of gain in peri-implant STT reported by RCTs or CCTs? The outcomes of the two SRs, the consensus statements, the clinical implications, and the research recommendations were discussed and subsequently approved at the consensus meeting during the group and plenary sessions. CONCLUSIONS: There was a tendency of superior esthetic outcomes in the presence of a thick mucosa. The connective tissue graft remains the standard of care in terms of increasing mucosa thickness.

In vivo evaluation of whitening toothpaste efficiency and patient treatment satisfaction: a randomized controlled trial.

OBJECTIVES: To assess the whitening efficiency and patient satisfaction after usage of commercially available toothpastes with the different whitening ingredients. MATERIALS AND METHODS: This randomized controlled trial study comprised 161 participants who were randomly divided into eight groups based on used whitening or control/conventional toothpaste (Colgate Max Expert White [CMEW], n = 20; Signal Daily White [SDW], n = 20; Himalaya Sparkly White Herbalis [HSWH], n = 20; Signal White System [SWS], n = 20; Rembrandt Deeply White + Peroxide [RDWP], n = 20; Splat Extreme White [SEW], n = 20; Splat White Plus [SWP], n = 21; and Kalodont Multi Repair [control], n = 20). Tooth color and color change were evaluated using a spectrophotometer (CIELAB coordinates, ΔEab*, ΔE00, whiteness index change [ΔWID]). Measurements were performed at baseline, 30 days and 60 days after the beginning of treatment, and 30 days after completing treatment - follow-up. Side effects and satisfaction with the whitening outcome were reported throughout the questionnaire. RESULTS: The results for ΔL*, Δa*, and Δb* showed an increase in lightness and decrease in yellowness for all tested whitening toothpastes compared to the control group after 30 days of use (p ≤ 0.05). Also, significant tooth color difference (ΔEab*, ΔE00) and whiteness index change (ΔWID) were recorded for all tested whitening toothpastes 30 days and 60 days from the beginning of use (p ≤ 0.05). Toothpaste containing a combination of urea peroxide and enzyme ingredients (SEW) demonstrated the highest and the longest whitening effect. CONCLUSIONS: Whitening toothpastes can show perceptibly whitening effect after a short time of usage, but without a long-lasting impact. CLINICAL RELEVANCE: Toothpaste containing a combination of enzymes and peroxides showed the best whitening performance compared to those containing only enzymes, peroxides, or abrasives. TRIAL REGISTRATION: ClinicalTrials.gov: NCT04460755.

Adhesion and whitening efficacy of P11-4 self-assembling peptide and HAP suspension after using NaOCl as a pre-treatment agent.

BACKGROUND: This study evaluated the adhesion and whitening efficacy of a mixture of hydroxyapatite and P11-4 self-assembling peptide (HAP-peptide) on bovine enamel after pre-treatment with low-concentrated sodium hypochlorite (NaOCl). METHODS: Fifty-two caries-free bovine incisors were selected. 50 teeth were randomly allocated to five groups (n = 10). The first group was treated with a mixture of 6.25 wt% HAP and 5 ml P11-4 peptide, using NaOCl 3% as pre-treatment. Second, third and fourth groups were treated with 6.25 wt% HAP, 5 ml P11-4 peptide, and NaOCl 3%, respectively. In the fifth group, only water was applied (control group). The color of samples was measured using a spectrophotometer (USB4000-VIS-NIR-ES, Ostfildern, Germany). To evaluate color changes, ΔE values were statistically analyzed. Finally, adherence of HAP particles on two enamel surfaces with and without pre-treatment with NaOCl was analyzed with SEM. RESULTS: It was observed that the ΔE of the HAP-peptide suspension after pre-treatment with NaOCl was significantly stronger than the control group. In contrast, the overall color changes of separate applications of HAP, peptide, and NaOCl did not differ notably from the control group. SEM observations confirmed that pre-treatment with NaOCl resulted in a more pronounced coverage of HAP on the enamel surface. CONCLUSIONS: Pre-treatment with a low-concentrated NaOCl enhanced the adherence of the HAP layer on the enamel surface, resulting in a stronger whitening effect. TRIAL REGISTRATION: The peptide-HAP suspension is effective in improving tooth whiteness.

Adhesion and whitening effects of P11-4 self-assembling peptide and HAP suspension on bovine enamel.

OBJECTIVES: This study evaluated the adhesion and whitening effects of a combination of P11-4 self-assembling peptide and hydroxyapatite (peptide-HAP) on bovine enamel. METHODS: Forty-six caries-free bovine teeth were selected, and 40 teeth were randomly allocated to one of five groups (n = 8). First, the effects of application frequency, exposure time, and storage in saliva on the whitening effects of an experimental low-concentrated peptide-HAP suspension (0.5 wt% HAP; Curodont, Credentis) were evaluated and compared with a commercial bleaching agent (VivaStyle Paint on Plus, VS, Ivoclar Vivadent). Tooth color was measured using a spectrophotometer (Gretag MacBeth), and color changes ΔE were statistically analyzed. Second, the effects of peptide-HAP concentration (low versus high: 6.25% HAP; Curodont Protect), and its interactions with saliva and postapplication restaining, were investigated. Third, enamel surfaces (n = 2) were treated with low concentration peptide-HAP and high-concentration peptide-HAP in polymeric and monomeric forms (Curodont Protect & Curodont Repair, Credentis) and analyzed by SEM. RESULTS: The ΔE of the low-concentration peptide-HAP suspension did not differ from that of VS. Application frequency, exposure time, and storage in saliva did not have any significant impact on whitening efficacy of the peptide-HAP suspension. Increasing the concentration of the suspension did not promote overall ΔE. SEM observations confirmed the presence of the newly generated peptide and HAP on the enamel surface. CONCLUSIONS: The peptide-HAP suspension is a mild tooth whitener, and the adhesion of peptide-HAP to enamel is concentration dependent. CLINICAL RELEVANCE: This peptide-HAP suspension is effective in offsetting discoloration caused by restaining after treatment.

The reproducibility of electronic color measurements of the marginal gingiva.

INTRODUCTION: This study evaluated the reproducibility of electronic color determination system evaluations of the marginal gingiva, which could be important for adhesive cervical fillings or prosthetic restorations that imitate the gingiva. MATERIAL AND METHODS: In 50 subjects, the L*, a*, and b* color coordinates were evaluated five times at a point in the marginal area of a central incisor using different electronic color determination systems: (SP) Shadepilot, (ES) Easyshade, (CE) Crystaleye, and (SV) X-Rite. The mean color difference (ΔE) and its standard deviation between the five measurements from each participant were calculated separately for each device. Further ICC for interdevice reliability was determined. RESULTS: The L*, a*, and b* color coordinates and ΔE values differed significantly among the systems (p < 0.001). Within each patient and measurement system, ΔE ranged from 1.4 to 3.2 (SD 1.1-2.5), L* from 2.6 to 5.7 (SD 2.6-5.7), a* from 11.9 to 21.3 (SD 3.6-3.9), and b* from 15.1 to 28.9 (SD 1.7-4.3). Interdevice reliability ranged between 0.675 and 0.807. CONCLUSIONS: Color determination of the marginal gingiva using the electronic tooth color determination systems tested herein showed limited reproducibility. The results obtained with the different measurement systems differed enormously. CLINICAL RELEVANCE: These results show that the electronic color measurement devices tested allow no high reproducible determination of color coordinates of the marginal gingiva.

The Amber-Colored Liquid: A Review on the Color Standards, Methods of Detection, Issues and Recommendations.

For most natural or naturally-derived liquid products, their color reflects on their quality and occasionally affects customer preferences. To date, there are a few subjective and objective methods for color measurement which are currently utilized by various industries. Researchers are also improving these methods and inventing new methods, as color is proven to have the ability to provide various information on the condition and quality of the liquid. However, a review on the methods, especially for amber-colored liquid, has not been conducted yet. This paper presents a comprehensive review on the subjective and objective methods for color measurement of amber-colored liquids. The pros and cons of the measurement methods, the effects of the color on customer preferences, and the international industry standards on color measurements are reviewed and discussed. In addition, this study elaborates on the issues and challenges related to the color measurement techniques as well as recommendations for future research. This review demonstrates that the existing color measurement technique can determine the color according to the standards and color scales. However, the efforts toward minimizing the complexity of the hardware while maximizing the signal processing through advanced computation are still lacking. Therefore, through this critical review, this review can hopefully intensify the efforts toward finding an optimized method or technique for color measurement of liquids and thus expedite the development of a portable device that can measure color accurately.

Visual and digital tooth shade selection methods, related effective factors and conditions, and their accuracy and precision: A literature review.

OBJECTIVE: Despite developments of dental shade selection methods, shade selection is still a challenge affecting esthetic outcomes. The purpose of this review was to discuss visual and digital shade taking methods, related effective factors and conditions, and their accuracy and precision to find out the most accurate, precise shade selection method available in dentistry. OVERVIEW: The key terms of accuracy, background, ceramic, color, colorimeter, color analysis, color science, color measurement, color measuring instrument, color matching, composite resin, dental/tooth shade guide, digital camera, esthetics, imaging, imaging application/program/ software, intraoral scanner, light source, photography, precision, shade, shade matching/ determination/prediction/reproduction/selection, shade taking device, spectrophotometer, spectrophotometry, tooth color measurement, tooth color/shade, and visual perception were used separately and jointly to detect related English-language articles published between January 1, 1985, and January 1, 2021. Electronic/non-electronic searches of Google Scholar/PubMed/Scopus/Web of Science were accomplished. Consequently, 249 articles were considered. Accordingly, the digital methods show higher accuracy and precision compared to the visual methods while requiring to be enhanced regarding accuracy to achieve ideal shade taking results. CONCLUSIONS: Dental spectrophotometers provide the highest overall accuracy and precision among different shade selection methods while needing clinical setting to control related effective factors/conditions and technological improvement to perform optimally. CLINICAL SIGNIFICANCE: Different factors can affect the accuracy and precision of tooth shade selection methods and devices. The understanding of these effective factors may lead to a standard shade taking protocol using accurate, precise methods and devices.

Development of a system to measure color in fresh and microwave dried banana slices.

The main focus of this study was to develop and calibrate a computerized image analysis system in order to measure the color of banana (Musa Cavendish) under microwave treatment. Bananas were cut into 2 mm slice thickness and dried at two different microwave power level; 540 W and 180 W. An algorithmic was developed which converted RGB color value from a color image into CIE L*a*b* values very well (ErrorL* = 2.163%, Errora* = 4.458%, Errorb* = 5.224%). Once the calibration is completed, it was applied to measure the color change in the banana slice during drying. The value of L* decreased from 89.01 to 71.17 and from 82.60 to 72.53 for both microwave treated samples suggesting browning is taking place during the drying operation. The value of a* increased from - 0.80 to 11.50 and from - 3.90 to 5.18 for 540 and 180 W microwave treated banana slices respectively suggesting tendency of redness increased. The same type of increment was observed for b* value. It changed from 36.46 to 60.51 and 34.02 to 72.82 for 540 and 180 W microwave treated banana slices, respectively. Artificial Neural Network (ANN) modeling was used for prediction of the developed CVS's values.

Quality assessment of raw and baked Aucklandia lappa Decne. by color measurement and fingerprint analysis.

Aucklandia lappa Decne. has been used as a traditional Chinese herb for thousands of years in treating various kinds of disorders. According to the Chinese Pharmacopoeia, there are two kinds of processed products, raw and baked Aucklandia lappa Decne., which have different therapeutic effect in clinical application. In this study, based on color measurement and fingerprint analysis, the method to assess the quality of these two processed products was established. In color measurement, the reference ranges of color parameters (L* , a* , and b* ), standard color difference values, and mathematical prediction functions of these two processed products were obtain after the color was measured by a spectrophotometer. Meanwhile, high-performance liquid chromatography fingerprints of these two processed products were established, where there were 12 peaks recognized as the common peaks in both processed products, in which two peaks were identified as costunolide and dehydrocostus lactone, and these two processed products were classified with chemometrics analysis subsequently. Furthermore, the correlation between color parameters and sample compositions was explored and the contents of costunolide and dehydrocostus lactone were determined simultaneously by high-performance liquid chromatography. Consequently, an integral method including color measurement, high-performance liquid chromatography fingerprint with chemometrics analysis, and quantitative determination was established.

Using a repositioning splint to determine reproducibility in the color registers of a dental spectrophotometer.

OBJECTIVES: The purpose of this study was to assess if the use of intraoral positioning guides could increase the reproducibility of color measurements with a dental spectrophotometer. METHODS: Twenty-three subjects were selected, and positioning guides for the maxillary arch of each participant were fabricated with clear 4 mm thermo-sheets. One orifice was made in the center of the clinical crown of the upper-right central incisor and another in the canine, with an external 6 mm diameter trephine. Color measurements were performed with a Vita EasyShade Compact IV dental spectrophotometer by the same operator in the same conditions. Forty measurements were taken per patient, 20 for each tooth, 10 with a positioning guide, and 10 without one. Before each measurement, the spectrophotometer was calibrated following the manufacturer's instructions. RESULTS: Using the Wilcoxon test to evaluate nonparametric variables, there are statistically significant differences (P < .05) between the use or not of positioner for color recording with spectrophotometer. Greater repeatability of the measurements is obtained using repositioning split. CONCLUSIONS: Within the limitations of this study, the use of positioning guides provides greater reproducibility in spectrophotometer measurements for all parameters of tooth 11 and for some parameters of tooth 13. CLINICAL SIGNIFICANCE: The use of a positioning guide for color measurement with a dental spectrophotometer allows a greater reproducibility of the measurements to be obtained. Achieving repeatable measurements is essential for studying the same area of the tooth, for example, in bleaching treatments and in color checks for prosthetic treatments.

Comparison of two color-difference formulas using the Bland-Altman approach based on gingiva color space.

The objectives of this study were to determine the relationship between the results provided by the classical CIELab (ΔEab*) and the CIEDE2000 (ΔE00) formulas and the gingival color space using the Bland and Altman limits of agreement, to use this relationship to establish the equivalences between the gingival color thresholds of perceptibility of both formulas, and to evaluate whether the relationship between ΔEab* and ΔE00 is modified depending on the axis in which the changes occur. The means of the L*, a*, and b* coordinates of the 21 gingiva porcelain samples (Heraceram, Heraeus Kulzer Mitsui Chemical Groups) were used and the differences in color were calculated in 210 pairs of samples using the CIELab (ΔE*ab) and CIEDE2000 (ΔE00) color-difference formulas. The results obtained with these formulas were compared and the limits of agreement after a logarithmic transformation of the data were obtained. The relationship between both formulas was ln ΔE00 = - 0.22 + ln ΔEab*. The results obtained with the CIELab formula were between 1.01 (95% confidence interval 0.98-1.03) and 1.54 (95% confidence interval 1.52-1.59) times higher than those obtained with the CIEDE200 formula. In the gingiva color space, the scale factor between the CIEDE2000 and CIELab values changes from 0.63 to 1.02, such that providing an accurate scale factor between both values proves difficult. The pairs with the highest ratio were those where the difference in color was mainly due to changes in lightness, whereas the pairs with the smallest ratio were those where the difference in color was mainly due to changes in the blue-yellow or green-red axes.

Spectrophotometric Evaluation of Anterior Maxillary Tooth Color Distribution According to Age and Gender.

PURPOSE: To determine the effects of age and gender on the color distribution of the right maxillary central, lateral incisors, and canine teeth. MATERIALS AND METHODS: The tooth color was measured using the VITA Easyshade V spectrophotometer with a total of 202 volunteers (89 men, 113 women). The age distribution in this study was between 15 and 70 years old (average: 31). A grey background color was used to prevent background reflection while performing the color measurements. RESULTS: According to the VITAPAN Classical shade guide, the tooth color distribution of the central and lateral incisors showed a maximum of A2, with a maximum of B3 for the canine teeth. When comparing the International Commission on Illumination L* , a* , and b* values (CIELab color space coordinates) of the teeth with subject gender, statistically significant differences were not found between gender and the L* and b* values (p > 0.05); however, a statistically significant difference was observed between gender and the a* values (p < 0.05). CONCLUSION: When the distribution ratio of tooth color was examined, different ratios were determined based on gender and age and between the maxillary central, lateral incisors, and canine teeth. A uniform tooth color should not be chosen for anterior restorations, and factors such as gender and age should be considered when making a color selection for patients.

Suitability of a Mobile Phone Colorimeter Application for Use as an Objective Aid when Matching Skin Color during the Fabrication of a Maxillofacial Prosthesis.

PURPOSE: Color matching a facial prosthesis to human skin is very challenging. Colorimeters aid this process by adding objectivity to what is an otherwise subjective procedure. Mobile phone colorimeter applications offer a less expensive and widely available alternative to dedicated colorimeter devices for color measurement. There is a lack of evidence in the literature regarding the suitability of mobile phone colorimeter applications for the development of silicone shades for facial prosthetics. The purpose of this study is to determine the suitability of a mobile phone colorimeter application for matching natural skin colors during the fabrication of maxillofacial prostheses. MATERIALS AND METHODS: Ten pigmented maxillofacial silicone elastomer swatches were fabricated to mimic a range of human skin tones. Color measurements of these swatches were recorded using a test instrument-the mobile phone colorimeter application (RGB Colorimeter) and a reference instrument-the commercially available skin color measurement device e-skin spectrocolorimeter. Comparisons in trueness and precision of the color measurements were made using previously described methods. Data analysis was performed on the recorded results for each of the parameters at three distances (25, 30, and 35 mm) of the test instrument from the target against both a black and a white background. RESULTS: The trueness of the mobile phone colorimeter application relative to the colorimeter device varied depending on the distance from the target and the background color. The relative trueness of the color difference measurements fell just within the documented upper threshold of acceptable limits of color difference (∆E 3.0 - 4.4). The calculated precision of the CIE L*a*b* and ∆E measurements of the mobile phone colorimeter application was good, with the latter being well within the documented acceptable limits. CONCLUSIONS: A mobile phone colorimeter application would be a suitable aid in objectifying the process of color matching a silicone maxillofacial prosthesis. Further investigation into image calibration to improve trueness and the control of variables such as background noise, uniformity of illumination, and measuring distance is required.