Development of ezetimibe eutectic with improved biopharmaceutical and mechanical properties to design an optimized oral solid dosage formulation.

Eutectics are multicomponent systems which are an alternative to the conventional techniques for modulating the biopharmaceutical properties of a pharmaceutical. Ezetimibe (ETZ) is a hypocholesterolemic agent with limited dissolution, poor water solubility, and subsequently demonstrates low oral bioavailability. Additionally, ETZ exhibits poor mechanical properties, leading to difficulties in developing dosage forms through direct compression. The present work highlights the applicability of eutectics in the simultaneous improvement of physicochemical along with mechanical properties of ETZ. A pharmaceutical eutectic of ETZ with succinimide (SUC) was prepared by mechanochemical grinding and thoroughly characterized using thermoanalytical, X-ray diffraction, and spectroscopic methods. Intrinsic dissolution rate and pharmacokinetic analysis were also performed for ezetimibe-succinimide (ETZ-SUC) eutectic in contrast to pure ETZ. The eutectic demonstrated ∼2-fold increase in the solubility and dissolution rate. In pharmacokinetic studies, the area under the curve (AUC) for ETZ-SUC eutectic (28.03 ± 2.22 ng*h/mL) was found to be higher than ETZ (8.98 ± 0.36 ng*h/mL), indicating improved oral bioavailability for eutectics. Also, it was observed that enhanced material functionality aids in designing directly compressed tablets, where the eutectic formulation showed an improved dissolution profile over the ETZ formulation. The study demonstrates that eutectic conglomerates could be utilized to develop ideal oral solid dosage formulations.

Emerging Artificial Intelligence (AI) Technologies Used in the Development of Solid Dosage Forms.

Artificial Intelligence (AI)-based formulation development is a promising approach for facilitating the drug product development process. AI is a versatile tool that contains multiple algorithms that can be applied in various circumstances. Solid dosage forms, represented by tablets, capsules, powder, granules, etc., are among the most widely used administration methods. During the product development process, multiple factors including critical material attributes (CMAs) and processing parameters can affect product properties, such as dissolution rates, physical and chemical stabilities, particle size distribution, and the aerosol performance of the dry powder. However, the conventional trial-and-error approach for product development is inefficient, laborious, and time-consuming. AI has been recently recognized as an emerging and cutting-edge tool for pharmaceutical formulation development which has gained much attention. This review provides the following insights: (1) a general introduction of AI in the pharmaceutical sciences and principal guidance from the regulatory agencies, (2) approaches to generating a database for solid dosage formulations, (3) insight on data preparation and processing, (4) a brief introduction to and comparisons of AI algorithms, and (5) information on applications and case studies of AI as applied to solid dosage forms. In addition, the powerful technique known as deep learning-based image analytics will be discussed along with its pharmaceutical applications. By applying emerging AI technology, scientists and researchers can better understand and predict the properties of drug formulations to facilitate more efficient drug product development processes.

Formulation Strategies to Improve the Stability and Handling of Oral Solid Dosage Forms of Highly Hygroscopic Pharmaceuticals and Nutraceuticals.

Highly hygroscopic pharmaceutical and nutraceutical solids are prone to significant changes in their physicochemical properties due to chemical degradation and/or solid-state transition, resulting in adverse effects on their therapeutic performances and shelf life. Moisture absorption also leads to excessive wetting of the solids, causing their difficult handling during manufacturing. In this review, four formulation strategies that have been employed to tackle hygroscopicity issues in oral solid dosage forms of pharmaceuticals/nutraceuticals were discussed. The four strategies are (1) film coating, (2) encapsulation by spray drying or coacervation, (3) co-processing with excipients, and (4) crystal engineering by co-crystallization. Film coating and encapsulation work by acting as barriers between the hygroscopic active ingredients in the core and the environment, whereas co-processing with excipients works mainly by adding excipients that deflect moisture away from the active ingredients. Co-crystallization works by altering the crystal packing arrangements by introducing stabilizing co-formers. For hygroscopic pharmaceuticals, coating and co-crystallization are the most commonly employed strategies, whereas coating and encapsulation are popular for hygroscopic nutraceuticals (e.g., medicinal herbs, protein hydrolysates). Encapsulation is rarely applied on hygroscopic pharmaceuticals, just as co-crystallization is rarely used for hygroscopic nutraceuticals. Therefore, there is potential for improved hygroscopicity reduction by exploring beyond the traditionally used strategy.

Cell culture and pharmacokinetic evaluation of a solid dosage formulation containing a water-insoluble orphan drug manufactured by FDM-3DP technology.

The in-vitro cytotoxicity, in-vitro permeability and in-vivo pharmacokinetics of a BCS Class-II drug - rufinamide - in a 3DP tablet formulation were evaluated. The cytotoxicity of the 3DP tablet formulation was evaluated with an MTT test; in-vitro permeability was evaluated with a Caco-2 cell culture study; and in-vivo pharmacokinetics were evaluated in Wistar albino male rats. The pharmacokinetic studies were performed following a two-sequence and single-period design approach. The highest Caco-2 permeability was obtained with the 3DP tablet formulation; and the highest cell viability was achieved with the 3DP tablet in both the Hep G2 and Caco-2 cell lines. In the in-vivo pharmacokinetic study, AUC and Cmax values were higher in the 3DP tablet formulation than in the Inovelon® film tablet at a 40 mg/kg dose. Thanks to the increased solubility of the active substance, higher in-vitro permeability and in-vivo absorption were achieved with the 3DP tablet formulation, and with lower cytotoxicity. Based on these promising findings, the 3DP tablet formulation can be considered an effective lower-dose treatment than commercial preparations.

Nicotinic Amidoxime Derivate BGP-15, Topical Dosage Formulation and Anti-Inflammatory Effect.

BGP-15 is a Hungarian-developed drug candidate with numerous beneficial effects. Its potential anti-inflammatory effect is a common assumption, but it has not been investigated in topical formulations yet. The aim of our study was to formulate 10% BGP-15 creams with different penetration enhancers to ensure good drug delivery, improve bioavailability of the drug and investigate the potential anti-inflammatory effect of BGP-15 creams in vivo. Since the exact mechanism of the effect is still unknown, the antioxidant effect (tested with UVB radiation) and the ability of BGP-15 to decrease macrophage activation were evaluated. Biocompatibility investigations were carried out on HaCaT cells to make sure that the formulations and the selected excipients can be safely used. Dosage form studies were also completed with texture analysis and in vitro release with Franz diffusion chamber apparatus. Our results show that the ointments were able to reduce the extent of local inflammation in mice, but the exact mechanism of the effect remains unknown since BGP-15 did not show any antioxidant effect, nor was it able to decrease LPS-induced macrophage activation. Our results support the hypothesis that BGP-15 has a potential anti-inflammatory effect, even if it is topically applied, but the mechanism of the effect remains unclear and requires further pharmacological studies.

Comparison of the Efficacy of Posaconazole Delayed Release Tablets and Suspension in Pediatric Hematology/Oncology Patients.

OBJECTIVES: Posaconazole is effective in preventing invasive fungal infections in neutropenic pediatric patients. The oral suspension has challenges in administration and absorption that are theorized to be minimized with delayed release tablets. However, this has not been validated in the pediatric population. This study was conducted to compare the efficacy and safety of posaconazole suspension and delayed release tablets in pediatric hematology/oncology patients. METHODS: A retrospective chart review in pediatric hematology/oncology patients was conducted from February 2013 to February 2017. Data collected include patient demographic data; posaconazole formulation, dose, and serum concentrations; and adverse events. RESULTS: Sixty-five patients with 353 serum posaconazole concentrations were included; 51.6% of concentrations drawn while patients were receiving posaconazole suspension were therapeutic, whereas 62.5% of concentrations drawn while patients were receiving posaconazole delayed release tablets were therapeutic (p = 0.035). Serum concentrations drawn while taking acid suppression (histamine receptor antagonists or proton pump inhibitors) and posaconazole suspension were less likely to be therapeutic (p < 0.0001) compared with those taken while receiving delayed release tablets. Adverse event profiles were similar between both formulations. CONCLUSIONS: Delayed release tablets proved more effective in achieving therapeutic serum posaconazole concentrations than posaconazole suspension, with minimal difference in adverse events, in pediatric hematology/oncology patients.

Systematic development of a high dosage formulation to enable direct compression of a poorly flowing API: A case study.

In this work, the transfer of oral solid dosage forms, currently manufactured via wet granulation, to a continuous direct compression process was considered. Two main challenges were addressed: (1) a poorly flowing API (Canagliflozin) and (2) high drug loading (51 wt%). A scientific approach was utilised for formulation development, targeting flow and compaction behaviour suitable for manufacturing scale. This was achieved through systematic screening of excipients to identify feasible formulations. Targeted design of experiments based on factors such as formulation mixture and processing parameters were utilised to investigate key responses for tablet properties, flow and compaction behaviour. Flow behaviour was primarily evaluated from percentage compressibility and shear cell testing on a powder flow rheometer (FT4). The compaction behaviour was studied using a compaction simulator (Gamlen). The relationships between tablet porosity, tensile strength and compaction pressure were used to evaluate tabletability, compactibility and compressibility to assess scale-up. The success of this design procedure is illustrated by scaling up from the compaction simulator to a Riva Piccola rotary tablet press, while maintaining critical quality attributes (CQAs). Compactibility was identified as a suitable scale-up relationship. The developed procedure should allow accelerated development of formulations for continuous direct compression.

Bacteriophage Therapy: Advances in Formulation Strategies and Human Clinical Trials.

Recently, a number of phage therapy phase I and II safety trials have been concluded, showing no notable safety concerns associated with the use of phage. Though hurdles for efficient treatment remain, these trials hold promise for future phase III clinical trials. Interestingly, most phage formulations used in these clinical trials are straightforward phage suspensions, and not much research has focused on the processing of phage cocktails in specific pharmaceutical dosage forms. Additional research on formulation strategies and the stability of phage-based drugs will be of key importance, especially with phage therapy advancing toward phase III clinical trials.

Pharmacokinetics of rabeprazole granules versus tablets, and the effect of food on the pharmacokinetics of rabeprazole granules in healthy adults-cross-study comparison.

The primary objective was to compare the pharmacokinetics (PK) of rabeprazole granules versus rabeprazole tablets, and assess the effect of food on the PK of rabeprazole granules. Data from three phase 1, open-label, single-dose, randomized, crossover studies in healthy adult participants are presented separately and as a cross-study comparison; study 1: PK of phase 1 rabeprazole granules versus rabeprazole tablets under fasting conditions; study 2: PK of phase 3 rabeprazole granules versus phase 1 rabeprazole granules; study 3: bioequivalence of to-be-marketed rabeprazole granules (sprinkle capsules) versus phase 3 rabeprazole granules; and assessment of the food effect for the to-be-marketed rabeprazole granules. Overall, 123 of 130 participants enrolled completed the studies. The overall plasma exposure as measured by area under the plasma concentration-time curve (AUC) was comparable between rabeprazole granules and tablets; mean peak plasma concentration (Cmax ) was lower for the granules compared with tablets. The plasma elimination half-life was short and independent of formulation. Food intake prior to administration of the to-be-marketed granules delayed the absorption and reduced the estimated parameters for bioavailability by 55% (Cmax ) and 28% (AUCinf ). Rabeprazole was well-tolerated.

A Simple RP-HPLC Method for Quantitation of Itopride HCl in Tablet Dosage Form.

An isocratic reversed phase high-performance liquid chromatographic method with ultraviolet detection at 220 nm has been developed for the quantification of itopride hydrochloride in tablet dosage form. The quantification was carried out using C(8) column (250 mm × 4.6 mm), 5-µm particle size SS column. The mobile phase comprised of two solvents (Solvent A: buffer 1.4 mL ortho-phosphoric acid adjusted to pH 3.0 with triethyl amine and Solvent B: acetonitrile). The ratio of Solvent A: Solvent B was 75:25 v/v. The flow rate was 1.0 mL (-1)with UV detection at 220 nm. The method has been validated and proved to be robust. The calibration curve was linear in the concentration range of 80-120% with coefficient of correlation 0.9995. The percentage recovery for itopride HCl was 100.01%. The proposed method was validated for its selectivity, linearity, accuracy, and precision. The method was found to be suitable for the quality control of itopride HCl in tablet dosage formulation.