RESUMO
Lithium-sulfur (Li-S) batteries hold immense promise as next-generation energy storage due to their high theoretical energy density (2600 Wh kg⻹), low cost, and non-toxic nature. However, practical implementation faces challenges, primarily from Li polysulfide (LiPS) shuttling within the cathode and Li dendrite growth at the anode. Optimized electrodes/electrolytes design effectively confines LiPS to the cathode, boosting cycling performance in coin cells to up to hundreds of cycles. Scaling up to larger pouch cells presents new obstacles, requiring further research for long-term stability. A 1.45 Ah pouch cell, with optimized sulfur loading and electrolyte/sulfur ratio is developed, which delivers an energy density of 151 Wh kg-1 with 70% capacity retention up to 100 cycles. Targeting higher energy density (180 Wh kg-1), the developed 1Ah pouch cell exhibits 68% capacity retention after 50 cycles. Morphological analysis reveals that pouch cell failure is primarily from Li metal powdering and resulting polarization, rather than LiPS shuttling. This occurs for continuous Li ion stripping/plating during cycling, leading to dendrite growth and formation of non-reactive Li powder, especially under high currents. These issues increase ion diffusion resistance and reduce coulombic efficiency over time. Therefore, the study highlights the importance of a protected Li metal anode for achieving high-energy-dense batteries.
RESUMO
OBJECTIVES: Transportation of medical samples between laboratories or hospital sites is typically performed by motorized ground transport. Due to the increased traffic congestions in urban environments, drone transportation has become an attractive alternative for fast shipping of samples. In accordance with the CLSI guidelines and the ISO 15189 standard, the impact of this transportation type on sample integrity and performance of laboratory tests must be thoroughly validated. METHODS: Blood samples from 36 healthy volunteers and bacterial spiked urine samples were subjected to a 20-40â¯min drone flight before they were analyzed and compared with their counterparts that stayed on the ground. Effects on stability of 30 routine biochemical and hematological parameters, immunohematology tests and flow cytometry and molecular tests were evaluated. RESULTS: No clinically relevant effects on blood group typing, flow cytometry lymphocyte subset testing and on the stability of the multicopy opacity-associated proteins (Opa) genes in bacterial DNA nor on the number of Abelson murine leukemia viral oncogene homolog 1 (abl) housekeeping genes in human peripheral blood cells were seen. For three of the 30 biochemistry and hematology parameters a statistically significant difference was found: gamma-glutamyl transferase (gamma-GT), mean corpuscular hemoglobin (MCH) and thrombocyte count. A clinically relevant effect however was only seen for potassium and lactate dehydrogenase (LDH). CONCLUSIONS: Multi-rotor drone transportation can be used for medical sample transportation with no effect on the majority of the tested parameters, including flow cytometry and molecular analyses, with the exception of a limited clinical impact on potassium and LDH.
RESUMO
The study titled, "Comparative Evaluation of Knapsack, Boom, and Drone Sprayers for Weed Management in Soybean (Glycine max L.)" was carried out during the Kharif season 2021-22 at an experimental farm affiliated with the Department of Agronomy, Vasantrao Naik Marathwada Krishi Vidyapeeth, Parbhani. The primary objective was to evaluate the comparative efficacy of various sprayers in controlling weeds in soybeans and their work efficiency. The Randomized Block Design (RBD) included ten treatments of pre-emergence (PE) and post-emergence (POE) herbicides applied by knapsack, boom, and drone sprayers. Pendimethalin 30% EC @ 750 g a.i ha-1 was used for pre-emergence herbicide application, and Imazamox 35% EC + Imazethapyr 35% WG @ 70 g a.i ha-1 were used for post-emergence. These treatments were tested on soybean Monocot and Dicot weed count, weed dry weight, weed index, and weed control efficiency. The sprayers were compared for time, water, labor, herbicide, and overall work efficiency. A knapsack sprayer showed the best results for pre- and post-emergence herbicide application, with the lowest weed count, dry weight, control efficiency, and weed index. Boom and drone sprayers followed in effectiveness. Herbicide application was faster with the drone sprayer than with hand weeding, cultural practices, boom sprayer, and knapsack sprayer. Compared to knapsack and boom sprayers, the drone sprayer used less water and labour. Drone sprayers work most efficiently, followed by boom and knapsack sprayers. This study focuses on the prevalence of herbicides and their impact on non-target ecosystems. It aims to develop mitigation strategies by optimizing spraying efficiency and reducing herbicide usage during pre and post emergence. The dissemination of efficient weed management practices that reduce environmental impacts and increase the efficiency of soybean cultivation is consistent with Sustainable Development Goal 15: life on land.
Assuntos
Glycine max , Herbicidas , Ecossistema , Dispositivos Aéreos não Tripulados , Herbicidas/análise , ÁguaRESUMO
BACKGROUND: In the near future, the incidence of mosquito-borne diseases may expand to new sites due to changes in temperature and rainfall patterns caused by climate change. Therefore, there is a need to use recent technological advances to improve vector surveillance methodologies. Unoccupied Aerial Vehicles (UAVs), often called drones, have been used to collect high-resolution imagery to map detailed information on mosquito habitats and direct control measures to specific areas. Supervised classification approaches have been largely used to automatically detect vector habitats. However, manual data labelling for model training limits their use for rapid responses. Open-source foundation models such as the Meta AI Segment Anything Model (SAM) can facilitate the manual digitalization of high-resolution images. This pre-trained model can assist in extracting features of interest in a diverse range of images. Here, we evaluated the performance of SAM through the Samgeo package, a Python-based wrapper for geospatial data, as it has not been applied to analyse remote sensing images for epidemiological studies. RESULTS: We tested the identification of two land cover classes of interest: water bodies and human settlements, using different UAV acquired imagery across five malaria-endemic areas in Africa, South America, and Southeast Asia. We employed manually placed point prompts and text prompts associated with specific classes of interest to guide the image segmentation and assessed the performance in the different geographic contexts. An average Dice coefficient value of 0.67 was obtained for buildings segmentation and 0.73 for water bodies using point prompts. Regarding the use of text prompts, the highest Dice coefficient value reached 0.72 for buildings and 0.70 for water bodies. Nevertheless, the performance was closely dependent on each object, landscape characteristics and selected words, resulting in varying performance. CONCLUSIONS: Recent models such as SAM can potentially assist manual digitalization of imagery by vector control programs, quickly identifying key features when surveying an area of interest. However, accurate segmentation still requires user-provided manual prompts and corrections to obtain precise segmentation. Further evaluations are necessary, especially for applications in rural areas.
Assuntos
Mudança Climática , Humanos , Animais , Malária/epidemiologia , Mosquitos Vetores , Tecnologia de Sensoriamento Remoto/métodos , Sistemas de Informação Geográfica , Processamento de Imagem Assistida por Computador/métodosRESUMO
INTRODUCTION: Quantification of dynamic contrast-enhanced (DCE)-MRI has the potential to provide valuable clinical information, but robust pharmacokinetic modeling remains a challenge for clinical adoption. METHODS: A 7-layer neural network called DCE-Qnet was trained on simulated DCE-MRI signals derived from the Extended Tofts model with the Parker arterial input function. Network training incorporated B1 inhomogeneities to estimate perfusion (Ktrans, vp, ve), tissue T1 relaxation, proton density and bolus arrival time (BAT). The accuracy was tested in a digital phantom in comparison to a conventional nonlinear least-squares fitting (NLSQ). In vivo testing was conducted in ten healthy subjects. Regions of interest in the cervix and uterine myometrium were used to calculate the inter-subject variability. The clinical utility was demonstrated on a cervical cancer patient. Test-retest experiments were used to assess reproducibility of the parameter maps in the tumor. RESULTS: The DCE-Qnet reconstruction outperformed NLSQ in the phantom. The coefficient of variation (CV) in the healthy cervix varied between 5 and 51% depending on the parameter. Parameter values in the tumor agreed with previous studies despite differences in methodology. The CV in the tumor varied between 1 and 47%. CONCLUSION: The proposed approach provides comprehensive DCE-MRI quantification from a single acquisition. DCE-Qnet eliminates the need for separate T1 scan or BAT processing, leading to a reduction of 10 min per scan and more accurate quantification.
RESUMO
INTRODUCTION: Unmanned aerial vehicles (UAVs), more commonly known as drones, have rapidly become more diverse in capabilities and utilization through technology advancements and affordability. While drones have had significant positive impact on healthcare and consumer delivery particularly in remote and austere environments, Violent Non-State Actors (VNSAs) have increasingly used drones as weapons in planning and executing terrorist attacks resulting in significant morbidity and mortality. We aim to analyze drone-related attacks globally against civilians and critical infrastructure for more effective hospital and prehospital care preparedness. METHODS: We retrospectively reviewed the Global Terrorism Database (GTD) from 1970 to 2020 to analyze the worldwide prevalence of drone-related attacks against civilians and critical infrastructure. Cases were excluded if they had insufficient information regarding a drone involvement, and if attacks were conducted by the government entities. The trends in the number of attacks per month, as well as the number of fatalities and injuries, were examined using time series and trend analysis. RESULTS: The database search yielded 253 drone-related incidents, 173 of which met inclusion criteria. These incidents resulted in 92 fatalities and 215 injuries with civilian targets most commonly attacked by drones (76 events, 43.9%), followed by military (46 events, 26.5-%). The Middle East region was most affected (168 events, 97% of attacks) and the Islamic state of Iraq was the most common perpetrator (106 events, 61.2%). Almost all attacks were by explosive devices attached to drones (172 events, 99.4%). Time series with linear trend analyses suggested an upward trends of drone attacks by VNSAs, resulting in a greater number of injuries and fatalities, that became more frequent over the years. CONCLUSIONS: Overtime, there were upward trends of drone attacks, with higher lethality and morbidity. There were more injuries compared to fatalities. Most common region affected was the Middle East, and most common type of weapon employed by drone technology was explosive weapon. Investment in medical personnel training, security, and research is crucial for an effective mass-casualty incident response after the drone attacks.
RESUMO
Unmanned Aerial Vehicle (UAV) deployment has risen rapidly in recent years. They are now used in a wide range of applications, from critical safety-of-life scenarios like nuclear power plant surveillance to entertainment and hobby applications. While the popularity of drones has grown lately, the associated intentional and unintentional security threats require adequate consideration. Thus, there is an urgent need for real-time accurate detection and classification of drones. This article provides an overview of drone detection approaches, highlighting their benefits and limitations. We analyze detection techniques that employ radars, acoustic and optical sensors, and emitted radio frequency (RF) signals. We compare their performance, accuracy, and cost under different operating conditions. We conclude that multi-sensor detection systems offer more compelling results, but further research is required.
RESUMO
Over the past decades, drones have become more attainable by the public due to their widespread availability at affordable prices. Nevertheless, this situation sparks serious concerns in both the cyber and physical security domains, as drones can be employed for malicious activities with public safety threats. However, detecting drones instantly and efficiently is a very difficult task due to their tiny size and swift flights. This paper presents a novel drone detection method using deep convolutional learning and deep transfer learning. The proposed algorithm employs a new feature extraction network, which is added to the modified YOU ONLY LOOK ONCE version2 (YOLOv2) network. The feature extraction model uses bypass connections to learn features from the training sets and solves the "vanishing gradient" problem caused by the increasing depth of the network. The structure of YOLOv2 is modified by replacing the rectified linear unit (relu) with a leaky-relu activation function and adding an extra convolutional layer with a stride of 2 to improve the small object detection accuracy. Using leaky-relu solves the "dying relu" problem. The additional convolution layer with a stride of 2 reduces the spatial dimensions of the feature maps and helps the network to focus on larger contextual information while still preserving the ability to detect small objects. The model is trained with a custom dataset that contains various types of drones, airplanes, birds, and helicopters under various weather conditions. The proposed model demonstrates a notable performance, achieving an accuracy of 77% on the test images with only 5 million learnable parameters in contrast to the Darknet53 + YOLOv3 model, which exhibits a 54% accuracy on the same test set despite employing 62 million learnable parameters.
RESUMO
Despite the significant advancements in drone sensory device reliability, data integrity from these devices remains critical in securing successful flight plans. A notable issue is the vulnerability of GNSS to jamming attacks or signal loss from satellites, potentially leading to incomplete drone flight plans. To address this, we introduce SiaN-VO, a Siamese neural network designed for visual odometry prediction in such challenging scenarios. Our preliminary studies have shown promising results, particularly for flights under static conditions (constant speed and altitude); while these findings are encouraging, they do not fully represent the complexities of real-world flight conditions. Therefore, in this paper, we have furthered our research to enhance SiaN-VO, improving data integration from multiple sensors and enabling more accurate displacement predictions in dynamic flight conditions, thereby marking a significant step forward in drone navigation technology.
RESUMO
Digital modelling stands as a pivotal step in the realm of Digital Twinning. The future trend of Digital Twinning involves automated exploration and environmental modelling in complex scenes. In our study, we propose an innovative solution for robot odometry, path planning, and exploration in unknown outdoor environments, with a focus on Digital modelling. The approach uses a minimum cost formulation with pseudo-randomly generated objectives, integrating multi-path planning and evaluation, with emphasis on full coverage of unknown maps based on feasible boundaries of interest. The approach allows for dynamic changes to expected targets and behaviours. The evaluation is conducted on a robotic platform with a lightweight 3D LiDAR sensor model. The robustness of different types of odometry is compared, and the impact of parameters on motion planning is explored. The consistency and efficiency of exploring completely unknown areas are assessed in both indoor and outdoor scenarios. The experiment shows that the method proposed in this article can complete autonomous exploration and environmental modelling tasks in complex indoor and outdoor scenes. Finally, the study concludes by summarizing the reasons for exploration failures and outlining future focuses in this domain.
RESUMO
Unmanned aerial vehicles (UAVs) and radar technology have benefitted from breakthroughs in recent decades. Both technologies have found applications independently of each other, but together, they also unlock new possibilities, especially for remote sensing applications. One of the key factors for a remote sensing system is the estimation of the flight attitude. Despite the advancements, accurate attitude estimation remains a significant challenge, particularly due to the limitations of a conventional Inertial Measurement Unit (IMU). Because these sensors may suffer from issues such as drifting, additional effort is required to obtain a stable attitude. Against that background, this study introduces a novel methodology for making an attitude estimation using radar data. Herein, we present a drone measurement system and detail its calculation process. We also demonstrate our results using three flight scenarios and outline the limitations of the approach. The results show that the roll and pitch angles can be calculated using the radar data, and we conclude that the findings of this research will help to improve the flight attitude estimation of remote sensing flights with a radar sensor.
RESUMO
Measurements of the vertical structure of the lower atmosphere are important to the understanding of air quality. Unmanned Aerial Systems (UASs, drones) can provide low cost, repeatable measurements of the temperature, pressure, and relative humidity. A set of inexpensive sensors controlled with an Arduino microprocessor board were tested on a UAS against a meteorology grade sensor. Two modes of operation for sampling were tested: a forward moving sampler and a vertical ascent sampler. A small particle sensor (Sensiron SPS30) was integrated and was capable of retrieving vertical aerosol distributions during an inversion event. The thermocouple-based temperature probe and the relative humidity measurement on the Bosch BME280 sensor correlated well with the meteorological sensor. The temperature and relative humidity sensors were then deployed on a rocket sounding platform. The rocket sounding system performed well up to a height of 400 m. The inexpensive sensors were found to perform adequately for low-cost development and uses in education and research.
RESUMO
It is important to achieve the 3D reconstruction of UAV remote sensing images in deep learning-based multi-view stereo (MVS) vision. The lack of obvious texture features and detailed edges in UAV remote sensing images leads to inaccurate feature point matching or depth estimation. To address this problem, this study improves the TransMVSNet algorithm in the field of 3D reconstruction by optimizing its feature extraction network and costumed body depth prediction network. The improvement is mainly achieved by extracting features with the Asymptotic Pyramidal Network (AFPN) and assigning weights to different levels of features through the ASFF module to increase the importance of key levels and also using the UNet structured network combined with an attention mechanism to predict the depth information, which also extracts the key area information. It aims to improve the performance and accuracy of the TransMVSNet algorithm's 3D reconstruction of UAV remote sensing images. In this work, we have performed comparative experiments and quantitative evaluation with other algorithms on the DTU dataset as well as on a large UAV remote sensing image dataset. After a large number of experimental studies, it is shown that our improved TransMVSNet algorithm has better performance and robustness, providing a valuable reference for research and application in the field of 3D reconstruction of UAV remote sensing images.
RESUMO
This article presents an analysis of current state-of-the-art sensors and how these sensors work with several mapping algorithms for UAV (Unmanned Aerial Vehicle) applications, focusing on low-altitude and high-speed scenarios. A new experimental construct is created using highly realistic environments made possible by integrating the AirSim simulator with Google 3D maps models using the Cesium Tiles plugin. Experiments are conducted in this high-realism simulated environment to evaluate the performance of three distinct mapping algorithms: (1) Direct Sparse Odometry (DSO), (2) Stereo DSO (SDSO), and (3) DSO Lite (DSOL). Experimental results evaluate algorithms based on their measured geometric accuracy and computational speed. The results provide valuable insights into the strengths and limitations of each algorithm. Findings quantify compromises in UAV algorithm selection, allowing researchers to find the mapping solution best suited to their application, which often requires a compromise between computational performance and the density and accuracy of geometric map estimates. Results indicate that for UAVs with restrictive computing resources, DSOL is the best option. For systems with payload capacity and modest compute resources, SDSO is the best option. If only one camera is available, DSO is the option to choose for applications that require dense mapping results.
RESUMO
In the field of unmanned systems, the combination of artificial intelligence with self-operating functionalities is becoming increasingly important. This study introduces a new method for autonomously detecting humans in indoor environments using unmanned aerial vehicles, utilizing the advanced techniques of a deep learning framework commonly known as "You Only Look Once" (YOLO). The key contribution of this research is the development of a new model (YOLO-IHD), specifically designed for human detection in indoor using drones. This model is created using a unique dataset gathered from aerial vehicle footage in various indoor environments. It significantly improves the accuracy of detecting people in these complex environments. The model achieves a notable advancement in autonomous monitoring and search-and-rescue operations, highlighting its importance for tasks that require precise human detection. The improved performance of the new model is due to its optimized convolutional layers and an attention mechanism that process complex visual data from indoor environments. This results in more dependable operation in critical situations like disaster response and indoor rescue missions. Moreover, when combined with an accelerating processing library, the model shows enhanced real-time detection capabilities and operates effectively in a real-world environment with a custom designed indoor drone. This research lays the groundwork for future enhancements designed to significantly increase the model's accuracy and the reliability of indoor human detection in real-time drone applications.
Assuntos
Inteligência Artificial , Dispositivos Aéreos não Tripulados , Humanos , Reprodutibilidade dos Testes , Sistemas Computacionais , CulturaRESUMO
For many applications, drones are required to operate entirely or partially autonomously. In order to fly completely or partially on their own, drones need to access location services for navigation commands. While using the Global Positioning System (GPS) is an obvious choice, GPS is not always available, can be spoofed or jammed, and is highly error-prone for indoor and underground environments. The ranging method using beacons is one of the most popular methods for localization, especially for indoor environments. In general, the localization error in this class is due to two factors: the ranging error, and the error induced by the relative geometry between the beacons and the target object to be localized. This paper proposes OPTILOD (Optimal Beacon Placement for High-Accuracy Indoor Localization of Drones), an optimization algorithm for the optimal placement of beacons deployed in three-dimensional indoor environments. OPTILOD leverages advances in evolutionary algorithms to compute the minimum number of beacons and their optimal placement, thereby minimizing the localization error. These problems belong to the Mixed Integer Programming (MIP) class and are both considered NP-hard. Despite this, OPTILOD can provide multiple optimal beacon configurations that minimize the localization error and the number of deployed beacons concurrently and efficiently.
RESUMO
In order to meet the increasing demand for crops under challenging climate conditions, efficient and sustainable cultivation strategies are becoming essential in agriculture. Targeted herbicide use reduces environmental pollution and effectively controls weeds as a major cause of yield reduction. The key requirement is a reliable weed detection system that is accessible to a wide range of end users. This research paper introduces a self-built, low-cost, multispectral camera system and evaluates it against the high-end MicaSense Altum system. Pixel-based weed and crop classification was performed on UAV datasets collected with both sensors in maize using a U-Net. The training and testing data were generated via an index-based thresholding approach followed by annotation. As a result, the F1-score for the weed class reached 82% on the Altum system and 76% on the low-cost system, with recall values of 75% and 68%, respectively. Misclassifications occurred on the low-cost system images for small weeds and overlaps, with minor oversegmentation. However, with a precision of 90%, the results show great potential for application in automated weed control. The proposed system thereby enables sustainable precision farming for the general public. In future research, its spectral properties, as well as its use on different crops with real-time on-board processing, should be further investigated.
RESUMO
This article investigates the causes of occasional flight instability observed in Unmanned Aerial Vehicles (UAVs). The issue manifests as unexpected oscillations that can lead to emergency landings. The analysis focuses on delays in the Extended Kalman Filter (EKF) algorithm used to estimate the drone's attitude, position, and velocity. These delays disrupt the flight stabilization process. The research identifies two potential causes for the delays. First cause is magnetic field distrurbances created by UAV motors and external magnetic fields (e.g., power lines) that can interfere with magnetometer readings, leading to extended EKF calculations. Second cause is EKF fusion step implementation of the PX4-ECL library combining magnetometer data with other sensor measurements, which can become computionally expensive, especially when dealing with inconsistent magnetic field readings. This can significantly increase EKF processing time. The authors propose a solution of moving the magnetic field estimation calculations to a separate, lower-priority thread. This would prevent them from blocking the main EKF loop and causing delays. The implemented monitoring techniques allow for continuous observation of the real-time operating system's behavior. Since addressing the identified issues, no significant problems have been encountered during flights. However, ongoing monitoring is crucial due to the infrequent and unpredictable nature of the disturbances.
RESUMO
This study examines the impact of Human-Drone Interaction (HDI) modalities on construction workers' safety and balance control within virtual environments. Utilising virtual reality (VR) simulations, the study explored how gesture and speech-based communications influence workers' physical postures and balance, contrasting these modalities with a non-interactive control group. One hundred participants were recruited, and their movements and balance control were tracked using motion sensors while they interacted with virtual drones through either gesture, speech, or without communication. Results showed that interactive modalities significantly improved balance control and reduced the risk of falls, suggesting that advanced HDI can enhance safety on construction sites. However, speech-based interaction increased cognitive workload, highlighting a trade-off between physical safety and mental strain. These findings underscore the potential of integrating intuitive communication methods into construction operations, although further research is needed to optimise these interactions for long-term use and in diverse noise environments.
This study examines the impact of Human-Drone Interaction (HDI) modalities on construction workers' safety and balance control within virtual environments with a human subject experiment. Results showed that interactive modalities significantly improved balance control and reduced the risk of falls.
RESUMO
Increasingly, dry conifer forest restoration has focused on reestablishing horizontal and vertical complexity and ecological functions associated with frequent, low-intensity fires that characterize these systems. However, most forest inventory approaches lack the resolution, extent, or spatial explicitness for describing tree-level spatial aggregation and openings that were characteristic of historical forests. Uncrewed aerial system (UAS) structure from motion (SfM) remote sensing has potential for creating spatially explicit forest inventory data. This study evaluates the accuracy of SfM-estimated tree, clump, and stand structural attributes across 11 ponderosa pine-dominated stands treated with four different silvicultural prescriptions. Specifically, UAS-estimated tree height and diameter-at-breast-height (DBH) and stand-level canopy cover, density, and metrics of individual trees, tree clumps, and canopy openings were compared to forest survey data. Overall, tree detection success was high in all stands (F-scores of 0.64 to 0.89), with average F-scores > 0.81 for all size classes except understory trees (< 5.0 m tall). We observed average height and DBH errors of 0.34 m and - 0.04 cm, respectively. The UAS stand density was overestimated by 53 trees ha-1 (27.9%) on average, with most errors associated with understory trees. Focusing on trees > 5.0 m tall, reduced error to an underestimation of 10 trees ha-1 (5.7%). Mean absolute errors of bole basal area, bole quadratic mean diameter, and canopy cover were 11.4%, 16.6%, and 13.8%, respectively. While no differences were found between stem-mapped and UAS-derived metrics of individual trees, clumps of trees, canopy openings, and inter-clump tree characteristics, the UAS method overestimated crown area in two of the five comparisons. Results indicate that in ponderosa pine forests, UAS can reliably describe large- and small-grained forest structures to effectively inform spatially explicit management objectives.