Novel Donor-Acceptor Based 4-Nitrophenol Luminophores as a Yellow-Orange Fluorescent Material for Optoelectronic Applications.

A new category of 4-nitrophenol (4-NP) luminophores, infused with varying amounts of Pyrene (Py), was synthesized using the standard solid-state reaction method to investigate novel luminophores that emit at longer wavelengths. Their optical and electrochemical properties were analyzed using fluorimetry and cyclic voltammetry techniques. The fluorescence spectrum of Py-doped 4-NP displayed a broad fluorescence band with a peak at 599 nm for a Py concentration of 1 × 10- 3 mol, indicating exciplex formation between 4-NP and Py in the excited state. The electrochemical data revealed that the energy levels of the Highest Occupied Molecular Orbital (HOMO) and Lowest Unoccupied Molecular Orbital (LUMO) for the synthesized luminophores ranged from - 5.72 to -5.73 eV and - 3.01 to -3.08 eV, respectively. Thermal stability was evaluated through TGA analysis. The XRD confirmed the synthesis of a homogeneous material. The SEM images showed crystal sizes of approximately 115 nm. This thorough investigation indicates the potential of these newly synthesized yellow-orange fluorescent luminophores for optoelectronic applications.

Small-Molecule:Polymer Composites for Transparent Films with Visible Emission.

The analysis of the shift in photoluminescence emission for a blend of polyvinylcarbazole and acrylonitrile derivative compounds is reported. The small-molecule compounds have different functional groups, phenyl, pyridine, or methyl phenyl, attached to an acrylonitrile group. According to the functional group, the blue emission for pure dye shifts to green or yellowish in the blend film. Several PVK:dye ratios from 0:100 to 20:80 were used for film deposition. The film morphology was analyzed by atomic force microscopy; for low dye content, homogeneous films were achieved. However, aggregates of several micrometers are formed on the surface of films with higher dye concentrations. The shift in emission occurs only with PVK, and for a non-conjugated matrix such as polystyrene, the emission remains unchanged. The interaction of dyes with PVK leading to change in emission was also achieved by grinding dye and polymer. Results showed that shifts in emission could come from exciplex formation along with changes in dye intermolecular interactions. The blend films were highly transparent in the visible spectra due to the absorption in the UV region for dye and matrix. The films with ratio PVK: dye ratio 80:20 was used as active layer in OLEDs.

Exciplex-Forming Cohost Systems with 2,3-Dicyanopyrazinophenanthrene-based Acceptors to Achieve Efficient Near Infrared OLEDs.

Two new 2,3-dicyanopyrazinophenanthrene-based acceptors (A) p-QCN and m-QCN were synthesized to blend with a donor (D) CPTBF for the exciplex formation. The energy levels of p-QCN and m-QCN are modulated by the peripheral substituents 4- and 3-benzonitrile, respectively. Exciplex-forming blends were identified by the observation of the red-shifted emissions from various D : A blends with higher ratios of donor for suppressing the aggregation of acceptor. The two-component relaxation processes observed by time-resolved photoluminescence support the thermally activated delayed fluorescence (TADF) character of the exciplex-forming blends. The device employing CPTBF : p-QCN and (2 : 1) and CPTBF : m-QCN (2 : 1) blend as the emitting layer (EML) gave EQEmax of 1.76 % and 5.12 %, and electroluminescence (EL) λmax of 629 nm and 618 nm, respectively. The device efficiency can be further improved to 4.32 % and 5.57 % with CPTBF : p-QCN and (4 : 1) and CPTBF : m-QCN (4 : 1) as the EML, which is consistent with their improved photoluminescence quantum yields (PLQYs). A new fluorescent emitter BPBBT with photoluminescence (PL) λmax of 726 nm and a high PLQY of 67 % was synthesized and utilized as the dopant of CPTBF : m-QCN (4 : 1) cohost system. The device employing CPTBF : m-QCN (4 : 1): 5 wt.% BPBBT as the EML gave an EQEmax of 5.02 % and EL λmax centered at 735 nm, however, the weak residual exciplex emission remains. By reducing the donor ratio, the exciplex emission can be completely transferred to BPBBT and the corresponding device with CPTBF : m-QCN (2 : 1): 5 wt.% BPBBT as the EML can achieve EL λmax of 743 nm and EQEmax of 4.79 %. This work manifests the high efficiency near infrared (NIR) OLED can be realized by triplet excitons harvesting of exciplex-forming cohost system, followed by the effective energy transfer to an NIR fluorescent dopant.

Dynamics of Electronically Excited Metal Atoms (Zn and Cd) in Rare Gas Matrices: Simulation of Multiple-band Emission using Molecular Dynamics with Quantum Transitions.

Molecular dynamics with quantum transitions approach is employed to simulate the spectroscopic characteristics of the 1 P1 ↔1 S0 transitions in atomic zinc and cadmium in order to gain insight into the excited state behavior of these atoms isolated in solid rare gases neon, argon, and krypton. The absorption and emission spectra are simulated. Non-radiative processes play a fundamental role in the transfer of population among the three electronic states initially accessed in absorption. Three distinct relaxation pathways were identified. Two of these are related to the dynamical modes described in previous works [McCaffrey and Kerins, J. Chem. Phys. 106, 7885 (1997); Kerins and McCaffrey, J. Chem. Phys. 109, 3131 (1998)] in which the system evolves to form a square planar configuration around the metal atom. The third distinct pathway involves motion on a hexagonal close packed plane. The temperature dependence of complex formation was also determined for the three relaxation pathways.

Recombination of X-ray-Generated Radical Ion Pairs in Alkane Solution Assembles Optically Inaccessible Exciplexes from a Series of Perfluorinated para-Oligophenylenes with N,N-Dimethylaniline.

We demonstrate that a series of perfluorinated para-oligophenylenes C6F5-(C6F4)n-C6F5 (n = 1-3) produce exciplexes with N,N-dimethylaniline (DMA) in degassed X-irradiated n-dodecane solutions. The optical characterization of the compounds shows that their short fluorescence lifetimes (ca. 1.2 ns) and UV-Vis absorption spectra, overlapping with the spectrum of DMA with molar absorption coefficients of 2.7-4.6 × 104 M-1cm-1, preclude the standard photochemical exciplex formation pathway via selective optical generation of the local excited state of the donor and its bulk quenching by the acceptor. However, under X-rays, the efficient assembly of such exciplexes proceeds via the recombination of radical ion pairs, which delivers the two partners close to each other and ensures a sufficient energy deposition. The exciplex emission is completely quenched by the equilibration of the solution with air, providing a lower bound of exciplex emission lifetime of ca. 200 ns. The recombination nature of the exciplexes is confirmed by the magnetic field sensitivity of the exciplex emission band inherited from the magnetic field sensitivity from the recombination of spin-correlated radical ion pairs. Exciplex formation in such systems is further supported by DFT calculations. These first exciplexes from fully fluorinated compounds show the largest known red shift of the exciplex emission from the local emission band, suggesting the potential of perfluoro compounds for optimizing optical emitters.

Management of Exciton Distribution for High-Performance Organic Light-Emitting Diodes Based on Interfacial Exciplex Architecture.

Interfacial exciplex has recently been adopted as an effective host to achieve phosphorescent organic light-emitting diodes (OLEDs) with high efficiencies and low driving voltages. However, a systematic understanding of exciton recombination behavior in either host of interfacial exciplex is still deficient. Herein, the strategic design rule of interfacial exciplex host is proposed to overcome the negative effects of direct trapping recombination by systematically investigating exciton recombination behavior in interfacial exciplex hosts. As a result, blue and orange phosphorescent devices acquire peak external quantum efficiencies of 23.5% and 29.2% with low turn-on voltages. These results provide a simple method to realize highly efficient OLEDs aiming for general lighting and display applications.

Recent Advances on Host-Guest Material Systems toward Organic Room Temperature Phosphorescence.

The design and characterization of purely organic room-temperature phosphorescent (RTP) materials for optoelectronic applications is currently the focus of research in the field of organic electronics. Particularly, with the merits of preparation controllability and modulation flexibility, host-guest material systems are encouraging candidates that can prepare high-performance RTP materials. By regulating the interaction between host and guest molecules, it can effectively control the quantum efficiency, luminescent lifetime, and color of host-guest RTP materials, and even produce RTP emission with stimuli-responsive features, holding tremendous potential in diverse applications such as encryption and anti-counterfeiting, organic light-emitting diodes, sensing, optical recording, etc. Here a roundup of rapid achievement in construction strategies, molecule systems, and diversity of applications of host-guest material systems is outlined. Intrinsic correlations between the molecular properties and a survey of recent significant advances in the development of host-guest RTP materials divided into three systems including rigid matrix, exciplex, and sensitization are presented. Providing an insightful understanding of host-guest RTP materials and offering a promising platform for high throughput screening of RTP systems with inherent advantages of simple material preparation, low-cost, versatile resource, and controllably modulated properties for a wide range of applications is intended.

Mechanism of Ir(ppy)3 Guest Exciton Formation with the Exciplex-Forming TCTA:TPBI Cohost within a Phosphorescent Organic Light-Emitting Diode Environment.

Cohosts based on hole transporting and electron transporting materials often act as exciplexes in the form of intermolecular charge transfer complexes. Indeed, exciplex-forming cohosts have been widely developed as the host materials for efficient phosphorescent organic light-emitting diodes (OLEDs). In host-guest systems of OLEDs, the guest can be excited by two competing mechanisms, namely, excitation energy transfer (EET) and charge transfer (CT). Experimentally, it has been reported that the EET mechanism is dominant and the excitons are primarily formed in the host first and then transferred to the guest in phosphorescent OLEDs based on exciplex-forming cohosts. With this, exciplex-forming cohosts are widely employed for avoiding the formation of trapped charge carriers in the phosphorescent guest. However, theoretical studies are still lacking toward elucidating the relative importance between EET and CT processes in exciting the guest molecules in such systems. Here, we obtain the kinetics of guest excitation processes in a few trimer model systems consisting of an exciplex-forming cohost pair and a phosphorescent guest. We adopt the Förster resonance energy transfer (FRET) rate constants for the electronic transitions between excited states toward solving kinetic master equations. The input parameters for calculating the FRET rate constants are obtained from density functional theory (DFT) and time-dependent DFT. The results show that while the EET mechanism is important, the CT mechanism may still play a significant role in guest excitations. In fact, the relative importance of CT over EET depends strongly on the location of the guest molecule relative to the cohost pair. This is understandable as both the coupling for EET and the interaction energy for CT are strongly influenced by the geometric constraints. Understanding the energy transfer pathways from the exciplex state of cohost to the emissive state of guest may provide insights for improving exciplex-forming materials adopted in OLEDs.

Triplet Exciton Upconverting Blue Exciplex Host for Deep Blue Phosphors.

A thermally activated delayed fluorescence (TADF)-type exciplex host employing a novel electron-transport type (n-type) type host managing positive polarons and stabilizing excitons was developed to elongate the device lifetime of deep blue phosphorescent organic light-emitting diodes (PhOLEDs). The bipolar n-type host was designed to prevent hole leakage and secure hole stability while being stabilized under excitons by introducing a CN-modified carbazole moiety as a weak donor. The TADF-type exciplex host-based blue PhOLEDs showed high (above 20 %) quantum efficiency with a deep blue color coordinate of (0.14, 0.16) and elongated device lifetime. The device operational lifetime of the blue PhOLEDs bearing the TADF-type exciplex host was extended by more than twice compared to that of the exciplex-free unipolar host. This work suggested a design concept of the n-type host to develop the TADF-type exciplex host for deep blue phosphors to reach a long lifespan in the deep blue PhOLEDs.

Exciplex Formation in Lipid-bound Escherichia coli Flavohemoglobin.

Flavohemoglobins have the particular capability of binding unsaturated and cyclopropanated fatty acids as free acids or phospholipids. Fatty acid binding to the ferric heme results in a weak but direct bonding interaction. Ferrous and ferric protein, in presence or absence of a bound lipid molecule, have been characterized by transient absorption spectroscopy. Measurements have been also carried out both on the ferrous deoxygenated and on the CO bound protein to investigate possible long-range interaction between the lipid acyl chain moiety and the ferrous heme. After excitation of the deoxygenated derivatives the relaxation process reveals a slow dynamics (350 ps) in lipid-bound protein but is not observed in the lipid-free protein. The latter feature and the presence of an extra contribution in the absorption spectrum, indicates that the interaction of iron heme with the acyl chain moiety occurs only in the excited electronic state and not in the ground electronic state. Data analysis highlights the formation of a charge-transfer complex in which the iron ion of the lipid-bound protein in the expanded electronic excited state, possibly represented by a high spin Fe III intermediate, is able to bind to the sixth coordination ligand placed at a distance of at 3.5 Šfrom the iron. A very small nanosecond geminate rebinding is observed for CO adduct in lipid-free but not in the lipid-bound protein. The presence of the lipid thus appears to inhibit the mobility of CO in the heme pocket.

Efficient Exciplex-Based Deep-Blue Organic Light-Emitting Diodes Employing a Bis(4-fluorophenyl)amine-Substituted Heptazine Acceptor.

The realization of a deep-blue-emitting exciplex system is a herculean task in the field of organic light-emitting diodes (OLEDs) on account of a large red-shifted and broadened exciplex emission spectrum in comparison to those of the corresponding single compounds. Herein, 2,5,8-tris(di(4-fluorophenyl)amine)-1,3,4,6,7,9,9b-heptaazaphenalene (HAP-3FDPA) was designed as an electron acceptor by integrating three bis(4-fluorophenyl)amine groups into a heptazine core, while 1,3-di(9H-carbazol-9-yl)benzene (mCP) possessing two electron-donating carbazole moieties was chosen as the electron donor. Excitingly, the exciplex system of 8 wt% HAP-3FDPA:mCP exhibited deep-blue emission and a high photoluminescence quantum yield of 53.2%. More importantly, an OLED containing this exciplex system as an emitting layer showed deep-blue emission with Commission Internationale de l'Eclairage coordinates of (0.16, 0.12), a peak luminance of 15,148 cd m-2, and a rather high maximum external quantum efficiency of 10.2% along with a low roll-off. This study not only reports an efficient exciplex-based deep-blue emitter but also presents a feasible pathway to construct highly efficient deep-blue OLEDs based on exciplex systems.

Generation of ion-radical chlorophyll states in the light-harvesting antenna and the reaction center of cyanobacterial photosystem I.

The energy and charge-transfer processes in photosystem I (PS I) complexes isolated from cyanobacteria Thermosynechococcus elongatus and Synechocystis sp. PCC 6803 were investigated by pump-to-probe femtosecond spectroscopy. The formation of charge-transfer (CT) states in excitonically coupled chlorophyll a complexes (exciplexes) was monitored by measuring the electrochromic shift of ß-carotene in the spectral range 500-510 nm. The excitation of high-energy chlorophyll in light-harvesting antenna of both species was not accompanied by immediate appearance of an electrochromic shift. In PS I from T. elongatus, the excitation of long-wavelength chlorophyll (LWC) caused a pronounced electrochromic effect at 502 nm assigned to the appearance of CT states of chlorophyll exciplexes. The formation of ion-radical pair P700+A1- at 40 ps was limited by energy transfer from LWC to the primary donor P700 and accompanied by carotenoid bleach at 498 nm. In PS I from Synechocystis 6803, the excitation at 720 nm produced an immediate bidentate bleach at 690/704 nm and synchronous carotenoid response at 508 nm. The bidentate bleach was assigned to the formation of primary ion-radical state PB+Chl2B-, where negative charge is localized predominantly at the accessory chlorophyll molecule in the branch B, Chl2B. The following decrease of carotenoid signal at ~ 5 ps was ascribed to electron transfer to the more distant molecule Chl3B. The reduction of phylloquinone in the sites A1A and A1B was accompanied by a synchronous blue-shift of the carotenoid response to 498 nm, pointing to fast redistribution of unpaired electron between two branches in favor of the state PB+A1A-.

Macroscopic Change in Luminescent Color by Thermally Driven Sliding Motion in [3]Rotaxanes.

Systematic investigation of rotaxane structures has revealed a rational design for thermally driven switching of their macroscopic properties. At low temperature, the luminophore is insulated by the macrocycles and displays monomer emission, whereas at high temperature, the luminophore is exposed owing to a change in the macrocyclic location distribution and interacts with external molecules, affording a thermally driven luminescent color change with high reversibility and responsiveness. This macroscopic switching through efficient thermal sliding was made possible by appropriate tuning of both the macrocycle-luminophore interactions within the rotaxane and the coupling between the excited luminophore and external molecules in an exciplex. The ability to switch properties by a simple and clean thermal stimuli should expand the utilization of rotaxanes as components of thermally driven molecular systems.

Exciplex Formation and Electromer Blocking for Highly Efficient Blue Thermally Activated Delayed Fluorescence OLEDs with All-Solution-Processed Organic Layers.

Highly efficient solution-processable emitters are greatly desired to develop low-cost organic light-emitting diodes (OLEDs). The recently developed thermally activated delayed fluorescence (TADF) materials are promising candidates, but blue TADF materials compatible with the all-solution-process have still not been achieved. Here, a series of TADF materials, named X-4CzCN, are developed by introducing the bulky units through an unconjugated linker, which realizes high molecular weight to enhance the solvent resistance ability without disturbing the blue TADF feature. Meanwhile, the peripheral wrapping groups efficiently inhibit the triplet-triplet and triplet-polaron quenching by isolating the energy-transfer and charge-transporting channels. The photophysical measurements indicate that a small variation in peripheral unit will have a noticeable effect on the luminescence efficiency. The enlarged volume of peripheral units will make the electroluminescent spectra blueshift, while enhancing the energy transfer of exciplex and blocking the energy leakage of electromer can facilitate the exciton utilization. As a result, the fully solution-processed blue OLED achieves a CIE of (0.16, 0.27), a low turn on voltage of 2.9 eV, and a high external quantum efficiency of 20.6 %. As far as we known, this is the first report of all-solution-processed TADF OLEDs with blue emission, which exhibits a high efficiency even comparable to the vacuum-deposited devices.

Photophysical and structural aspects of perylene-doped 2-naphthol luminophors: Green emission by exciplex formation.

Several perylene (Pery)-doped 2-naphthol (2-NP) (Pery/2-NP) luminophors were prepared using conventional solid-state reaction techniques. Energy transfer in the excited state was examined using fluorescence spectroscopy and cyclic voltammetry. Fluorescence studies revealed exciplex formation by Pery in the form of structureless and broad spectra at higher concentrations with monomer quenching of 2-NP; a broad green emission was observed in the range 500-650 nm, peaking at 575 nm. Structural properties and thermal stability were analyzed using X-ray diffraction, scanning electron microscopy and TGA-differential scanning calorimetry. Highest occupied molecular orbital and lowest unoccupied molecular orbital energy levels were observed in the range 5.56-5.61 eV and 2.79-2.81 eV, respectively with a 2.77-2.82 eV band gap. The present study reveals these to be probable candidates for hole-transporting materials suitable in optoelectronics.

Synthesis and properties of quinazoline-based versatile exciplex-forming compounds.

Three compounds, bearing a quinazoline unit as the acceptor core and carbazole, dimethyldihydroacridine, or phenothiazine donor moieties, were designed and synthesized in two steps including a facile copper-catalyzed cyclization and a nucleophilic aromatic substitution reaction. The photophysical properties of the compounds, based on theoretical calculations and experimental measurements, as well as the electrochemical and thermal properties, are discussed. The synthesized compounds form glasses with glass-transition temperatures ranging from 116 °C to 123 °C. The ionization potentials estimated by cyclic voltammetry of the derivatives were in the range of 5.22-5.87 eV. The 3,6-di-tert-butylcarbazole-substituted quinazoline-based compound forms a sky-blue emitting exciplex in solid mixture with the acceptor 2,4,6-tris[3-(diphenylphosphinyl)phenyl]-1,3,5-triazine as well as an orange emitting exciplex with the donor 4,4',4″-tris[3-methylphenyl(phenyl)amino]triphenylamine. A white OLED based on these versatile exciplex systems with a relatively high maximum brightness of 3030 cd/m2 and an external quantum efficiency of 0.5% was fabricated.

Development of Materials for Blue Organic Light Emitting Devices.

The success of organic light emitting diodes (OLED) has been witnessed by the commercialization of this technology for manufacturing the vivid and colorful displays used in our daily life now. The prospective growth of OLED technology on display industry will be optimistic. Over the last three decades, many different approaches on material and device designs have been implemented for improving the efficiency and stability of OLED devices. These efforts install main cornerstones to support the great achievement of OLED technology. However, until now, the performance and stability of blue OLEDs still have some concerns. This troublesome issue should be totally conquered before the large-scale manufactures dominated over other display technologies, particularly liquid crystal-based displays, takes place. Though significant progress has already been made to achieve high performance and long lifetime blue OLEDs, this topic still remains as one of the hot researches in OLEDs. We have been working on this area for about two decades and made some notable contributions. Consequently, in this personal account we have outlined our efforts to obtain better performing blue OLEDs by utilizing a range of emitters based on fluorescence, phosphorescence, delayed fluorescence and exciplex systems. We have also developed some novel host materials for blue OLEDs, which are worth mentioning in this account.

Recent Advances in Conjugated TADF Polymer Featuring in Backbone-Donor/Pendant-Acceptor Structure: Material and Device Perspectives.

Along with the persistent research interest in organic light-emitting diode (OLED) display and lighting technology, a new studying topic is now focused on developing thermally activated delayed fluorescence (TADF) polymer emitters, with the purpose to achieve high-performance cost-effective, solution-processed OLEDs (s-OLEDs) purely from fluorescent-type materials. However, research in this topic is in its infancy about the designing rules of polymer structures, photophysical mechanisms and the correlated devices. In this Personal Account, mainly from our personal experience we will shortly introduce the historical developments, status and perspectives about one representative kinds of TADF polymers, i. e. the conjugated TADF polymers featuring in backbone-donor/pendant-acceptor (BDPA) structure scaffold, which shows very promising electroluminescent (EL) performance even using simple s-OLED structure. Special attention is focused on illustrate the molecular designing & synthesis motivation, chemistry & device tactics towards solving the limiting factors about the quantum yields and aggregation-quenching tendency in solid states. Further challenges and strategies towards optimizing their overall EL performance, e. g. simultaneous achieving extremely high external quantum efficiency, power efficiency and low roll-off rate, are also discussed.

Photoinduced Electron Transfer-Promoted Reactions Using Exciplex-Type Organic Photoredox Catalyst Directly Linking Donor and Acceptor Arenes.

Directly linked donor and acceptor arenes, such as phenanthrene/naphthalene/biphenyl and 1,3-dicyanobenzene were found to work as photoredox catalysts in the photoreactions of indene, 2,3-dimethyl-2-butene, and 4-methoxyphenylacetic acid. The new stable organic photocatalyst forms an intramolecular exciplex (excited complex) when irradiated in a polar solvent and shows redox catalyst activity, even at low concentrations. To the best of our knowledge, this is the first example of an intramolecular exciplex working as a redox catalyst.

Green Photo-Organocatalytic C-H Activation of Aldehydes: Selective Hydroacylation of Electron-Deficient Alkenes.

Selective C-H activation is an area of growing importance. Metal-free C-H activation of branched aldehydes mediating the hydroacylation of electron-deficient alkenes is an attractive transformation, but is limited by selectivity issues, especially in the case of α,α-disubstituted aldehydes. Herein, we report a green, cheap, versatile, and easily reproducible selective hydroacylation of alkenes utilizing phenylglyoxylic acid as the photocatalyst and common household bulbs for irradiation, leading to products in excellent yields and selectivities. The reaction mechanism was also studied to account for the high selectivity.