RESUMO
We present a novel lung aerosol exposure system named MALIES (modular air-liquid interface exposure system), which allows three-dimensional cultivation of lung epithelial cells in alveolar-like scaffolds (MatriGrids®) and exposure to nanoparticle aerosols. MALIES consists of multiple modular units for aerosol generation, and can be rapidly assembled and commissioned. The MALIES system was proven for its ability to reliably produce a dose-dependent toxicity in A549 cells using CuSO4 aerosol. Cytotoxic effects of BaSO4- and TiO2-nanoparticles were investigated using MALIES with the human lung tumor cell line A549 cultured at the air-liquid interface. Experiments with concentrations of up to 5.93 × 105 (BaSO4) and 1.49 × 106 (TiO2) particles/cm3, resulting in deposited masses of up to 26.6 and 74.0 µg/cm2 were performed using two identical aerosol exposure systems in two different laboratories. LDH, resazurin reduction and total glutathione were measured. A549 cells grown on MatriGrids® form a ZO-1- and E-Cadherin-positive epithelial barrier and produce mucin and surfactant protein. BaSO4-NP in a deposited mass of up to 26.6 µg/cm2 resulted in mild, reversible damage (~ 10% decrease in viability) to lung epithelium 24 h after exposure. TiO2-NP in a deposited mass of up to 74.0 µg/cm2 did not induce any cytotoxicity in A549 cells 24 h and 72 h after exposure, with the exception of a 1.7 fold increase in the low exposure group in laboratory 1. These results are consistent with previous studies showing no significant damage to lung epithelium by short-term treatment with low concentrations of nanoscale BaSO4 and TiO2 in in vitro experiments.
Assuntos
Nanopartículas , Aerossóis e Gotículas Respiratórios , Humanos , Células A549 , Células Cultivadas , Nanopartículas/toxicidade , Linhagem Celular , AerossóisRESUMO
The size of virus-laden particles determines whether aerosol or droplet transmission is dominant in the airborne transmission of pathogens. Determining dominant transmission pathways is critical to implementing effective exposure risk mitigation strategies. The aerobiology discipline greatly needs an air sampling system that can collect virus-laden airborne particles, separate them by particle diameter, and deliver them directly onto host cells without inactivating virus or killing cells. We report the use of a testing system that combines a BioAerosol Nebulizing Generator (BANG) to aerosolize Human coronavirus (HCoV)-OC43 (OC43) and an integrated air sampling system comprised of a BioCascade impactor (BC) and Viable Virus Aerosol Sampler (VIVAS), together referred to as BC-VIVAS, to deliver the aerosolized virus directly onto Vero E6 cells. Particles were collected into four stages according to their aerodynamic diameter (Stage 1: >9.43 µm, Stage 2: 3.81-9.43 µm, Stage 3: 1.41-3.81 µm and Stage 4: <1.41 µm). OC43 was detected by reverse-transcription quantitative polymerase chain reaction (RT-qPCR) analyses of samples from all BC-VIVAS stages. The calculated OC43 genome equivalent counts per cm3 of air ranged from 0.34±0.09 to 70.28±12.56, with the highest concentrations in stage 3 (1.41-3.81 µm) and stage 4 (<1.41 µm). Virus-induced cytopathic effects appeared only in cells exposed to particles collected in stages 3 and 4, demonstrating the presence of viable OC43 in particles <3.81 µm. This study demonstrates the dual utility of the BC-VIVAS as particle size-fractionating air sampler and a direct exposure system for aerosolized viruses. Such utility may help minimize conventional post-collection sample processing time required to assess the viability of airborne viruses and increase the understanding about transmission pathways for airborne pathogens.
RESUMO
OBJECTIVE: Lack of biomimicry in geometry and flow conditions of emissions systems for analytical testing and biological exposure has led to fundamental limitations, including a poor understanding of dose delivered to specific airway locations. This work characterizes mass distribution of a JUUL® brand e-cigarette in a Biomimetic Aerosol Exposure System (BAES). MATERIALS AND METHODS: A combination of mass balance, direct measurements, and inferences based on direct measurements were used to characterize regional and local dose as a function of system flow path configuration and emissions topography profile. RESULTS: Doses produced by the emissions topography profile with only puffing were significantly different from profiles with clean air inhalation following puffs. Mass characterization results support that dose can be manipulated using flow path geometry. Local and regional deposition was mapped throughout the system. DISCUSSION AND CONCLUSIONS: We estimate the fraction of yield to the mouth deposited at several locations throughout the system for a variety of puffing and respiration topographies and show that emissions topography profile and system flow path geometry affect dose. This work provides proof-of-concept for assessing mass distribution as a function of aerosol generator (e-cigarette product), user airway geometry, and inhalation and puffing topography.
Assuntos
Aerossóis , Sistemas Eletrônicos de Liberação de Nicotina , Biomimética , Exposição por Inalação/análise , HumanosRESUMO
As the fifth-generation (5G) network is introduced in the millimetre-wave (mmWave) spectrum, and the widespread deployment of 5G standalone (SA) is approaching, it becomes essential to establish scientifically grounded exposure limits in the mmWave frequency band. To achieve this, conducting experiments at specific frequencies is crucial for obtaining reliable evidence of potential biological impacts. However, there is a literature gap where experimental research either does not utilise the mmWave high band (e.g., the 26 Gigahertz (GHz) band) or most studies mainly rely on computational approaches. Moreover, some experimental studies do not establish reproducible test environment and exposure systems. Addressing these gaps is vital for a comprehensive exploration of the biological implications associated with mmWave exposure. This study was designed to develop and implement a mmWave exposure system operating at 26 GHz. The step-by-step design and development of the system are explained. This specialised system was designed and implemented within an anechoic chamber to minimise external electromagnetic (EM) interference, creating a controlled and reproducible environment for experiments involving high-frequency EM fields. The exposure system features a 1 cm radiation spot size, enabling highly localised exposure for various biological studies. This configuration facilitates numerous dosimetry studies related to mmWave frequencies.
RESUMO
OBJECTIVE: Due to recent increases in the use of vaping devices, there is a high demand for research addressing the respiratory health effects of vaping products. Given the constantly changing nature of the vaping market with new devices, flavors, metals, and other chemicals rapidly emerging, there is a need for inexpensive and highly adaptable vaping device exposure systems. Here, we describe the design and validation of a novel in vitro aerosol exposure system for toxicity testing of vaping devices. MATERIALS AND METHODS: We developed an inexpensive, open-source in vitro vaping device exposure system that produces even deposition, can be adapted for different vaping devices, and allows for experiments to be performed under physiological conditions. The system was then validated with deposition testing and a representative exposure with human bronchial epithelial cells (hBECs). RESULTS: The Vaping Product Exposure System (VaPES) produced sufficient and uniform deposition for dose-response studies and was precise enough to observe biological responses to vaping exposures. VaPES was adapted to work with both pod and cartridge-based vaping devices. CONCLUSION: We have designed and validated a novel vaping device exposure system that will eliminate the need to use high-cost commercial exposure systems, lowering the barrier to entry of physiologically relevant vaping studies.
Assuntos
Sistemas Eletrônicos de Liberação de Nicotina , Vaping , Humanos , Vaping/efeitos adversos , Aerossóis , MetaisRESUMO
In vitro testing is important to characterise biological effects of consumer products, including nicotine delivery products such as cigarettes, e-cigarettes and heated tobacco products. Users' cells are exposed to these products' aerosols, of variant chemical compositions, as they move along the respiratory tract. In vitro exposure systems are available to model such exposures, including delivery of whole aerosols to cells, and at the air-liquid interface. Whilst there are clear advantages of such systems, factors including time to aerosol delivery, aerosol losses and number of cell cultures that can be exposed at one time could be improved. This study aimed to characterise a custom-built smoke/ aerosol exposure in vitro system (SAEIVS) using 1R6F reference cigarette smoke. This system contains five parallel smoking chambers and delivers different dilutions of smoke/ aerosol to two separate cell culture exposure chambers in <10 s. Using two dosimetry measures (optical density 400 nm [OD400 ]; mass spectrometric nicotine quantification), the SAEIVS demonstrated excellent linearity of smoke dilution prior to exposure (R2 = 0.9951 for mass spectrometric quantification; R2 = 0.9965 for OD400 ) and consistent puff-wise exposures across 24 and 96 well plates in cell culture relevant formats (e.g., within inserts). Smoke loss was lower than previously reported for other systems (OD400 : 16%; nicotine measurement: 20%). There was good correlation of OD400 and nicotine measurements, indicating that OD was a useful surrogate for exposure dosimetry for the product tested. The findings demonstrated that the SAEIVS is a fit-for-purpose exposure system for the reproducible dose-wise exposure assessment of nicotine delivery product aerosols.
Assuntos
Sistemas Eletrônicos de Liberação de Nicotina , Produtos do Tabaco , Nicotina/toxicidade , Nicotina/análise , Produtos do Tabaco/toxicidade , Nicotiana/toxicidade , AerossóisRESUMO
Plants can serve as sensitive bioindicators of the presence of contaminant vapors in the atmosphere. This work describes a novel laboratory-based gas exposure system capable of calibrating plants as bioindicators for the detection and delineation of the atmospheric contaminant hydrogen fluoride (HF) as a preparatory step for monitoring release emissions. To evaluate changes in plant phenotype and stress-induced physiological effects attributed to HF alone, the gas exposure chamber must have additional controls to simulate otherwise optimal plant growth conditions including variables such as light intensity, photoperiod, temperature, and irrigation. The exposure system was designed to maintain constant growth conditions during a series of independent experiments that varied between optimal (control) and stressful (HF exposure) conditions. The system was also designed to ensure the safe handling and application of HF. An initial system calibration introduced HF gas into the exposure chamber and monitored HF concentrations by cavity ring-down spectroscopy for a 48-h period. Stable concentrations inside the exposure chamber were observed after approximately 15 h, and losses of HF to the system ranged from 88 to 91%. A model plant species (Festuca arundinacea) was then exposed to HF for 48 h. Visual phenotype stress-induced responses aligned with symptoms reported in the literature for fluoride exposure (tip dieback and discoloration along the dieback transition margin). Fluoride concentrations in exposed tissues compared to control tissues confirmed enhanced fluoride uptake due to HF exposure. The system described herein can be applied to other reactive atmospheric pollutants of interest in support of bioindicator research.
Assuntos
Fluoretos , Ácido Fluorídrico , Fluoretos/toxicidade , Gases , Biomarcadores Ambientais , Monitoramento Ambiental/métodos , PlantasRESUMO
This study introduced a time-delay exposure system independent of the mobile digital radiography equipment. The system consisted of lithium battery, delay control circuit, micro electric motor and related auxiliary facilities. When the starting time was reached through the delay circuit, the motor pushed out the rod to squeeze the exposure button and completed the exposure. The accessories used in this system were easy to purchase and cheap. At the same time, the technology was mature and had good compatibility. The exposure success rate was high and the exposure effect was satisfactory. This time-delay exposure system had good practicability and popularization value.
Assuntos
Intensificação de Imagem Radiográfica , Tecnologia , Fontes de Energia ElétricaRESUMO
Exposure to fine particulate matter (PM2.5) could damage multiple organs and systems. Recent epidemiological studies have shown that PM2.5 can disrupt dynamic balance of thyroid hormone (TH). However, the underlying mechanism by which PM2.5 interferes with TH remains unclear. This study evaluated the role of Gli-similar3 (GLIS3) in the effect of PM2.5 on TH synthesis in mice using a real-ambient exposure system, in Shijiazhuang City, Hebei Province. The PM2.5exposure group (PM) and filtered air group (FA) were placed in the exposure device for four and eight weeks. The results showed that the PM2.5 exposure altered the structure of the thyroid gland. Moreover, after PM2.5 exposure for eight weeks, the exposure level of free thyroxine (FT4) increased and the expression level of thyroid stimulating hormone (TSH) decreased in serum of mice. In addition, PM2.5 exposure significantly increased the expression of proteins related to thyroid hormone synthesis, such as sodium iodide transporter (NIS), thyroid peroxidase (TPO) and thyroglobulin (TG). Next, we found that GLIS3 and thyroid transcription factor Paired box 8 (PAX8) also increased after PM2.5 exposure. In order to further explore the potential molecular mechanism, we carried out transcriptome sequencing. KEGG analysis of the top 10 pathways revealed that the Ras-associated protein 1 (Rap1) signaling pathway could activate transcription factors and is related to thyroid cell survival. Additionally, PM2.5 exposure significantly increased the protein levels of Rap1 and its active form (Rap1 +GTP). We speculate that the active state of Rap1 is believed to be involved in activating the expression of transcription factor GLIS3. In conclusion, PM2.5 exposure induces histological changes in the thyroid gland and thyroid dysfunction in mice. The exposure activates GLIS3 through the Rap1/PI3K/AKT pathway to promote the expression of proteins related to thyroid hormone synthesis, leading to increased dysregulating TH homeostasis.
Assuntos
Fosfatidilinositol 3-Quinases , Glândula Tireoide , Animais , Proteínas de Ligação a DNA/metabolismo , Homeostase , Camundongos , Material Particulado/metabolismo , Fosfatidilinositol 3-Quinases/metabolismo , Proteínas Proto-Oncogênicas c-akt/metabolismo , Proteínas Repressoras/metabolismo , Transdução de Sinais , Hormônios Tireóideos/metabolismo , Transativadores/metabolismoRESUMO
Glutaraldehyde (GA) has been cleared by the Center for Devices and Radiological Health (CDRH) of the Food and Drug Administration (FDA) as a high-level disinfectant for disinfecting heat-sensitive medical equipment in hospitals and healthcare facilities. Inhalation exposure to GA is known to cause respiratory irritation and sensitization in animals and humans. To reproduce some of the known in vivo effects elicited by GA, we used a liquid aerosol exposure system and evaluated the tissue responses in a human in vitro airway epithelial tissue model. The cultures were treated at the air interface with various concentrations of GA aerosols on five consecutive days and changes in tissue function and structure were evaluated at select timepoints during the treatment phase and after a 7-day recovery period. Exposure to GA aerosols caused oxidative stress, inhibition of ciliary beating frequency, aberrant mucin production, and disturbance of cytokine and matrix metalloproteinase secretion, as well as morphological transformation. Some effects, such as those on goblet cells and ciliated cells, persisted following the 7-day recovery period. Of note, the functional and structural disturbances observed in GA-treated cultures resemble those found in ortho-phthaldehyde (OPA)-treated cultures. Furthermore, our in vitro findings on GA toxicity partially and qualitatively mimicked those reported in the animal and human survey studies. Taken together, observations from this study demonstrate that the human air-liquid-interface (ALI) airway tissue model, integrated with an in vitro exposure system that simulates human inhalation exposure, could be used for in vitro-based human hazard identification and the risk characterization of aerosolized chemicals.
Assuntos
Desinfetantes , Células Caliciformes , Animais , Humanos , Glutaral/toxicidade , Aerossóis/toxicidade , Aerossóis/química , Desinfetantes/toxicidade , Metaloproteinases da Matriz , CitocinasRESUMO
Formaldehyde (FA) is an irritating, highly reactive aldehyde that is widely regarded as an asthmagen. In addition to its use in industrial applications and being a product of combustion reaction and endogenous metabolism, FDA-regulated products may contain FA or release FA fumes that present toxicity risks for both patients and healthcare workers. Exposure to airborne FA is associated with nasal neoplastic lesions in both animals and humans. It is classified as a Group 1 carcinogen by International Agency for Research on Cancer (IARC) based on the increased incidence of cancer in animals and a known human carcinogen in the Report on Carcinogens by National Toxicology Program (NTP). Herein, we systematically evaluated the tissue responses to FA fumes in an in vitro human air-liquid-interface (ALI) airway tissue model. Cultures were exposed at the air interface to 7.5, 15, and 30 ppm of FA fumes 4 h per day for 5 consecutive days. Exposure to 30 ppm of FA induced sustained oxidative stress, along with functional changes in ciliated and goblet cells as well as possible squamous differentiation. Furthermore, secretion of the proinflammatory cytokines, IL-1ß, IL-2, IL-8, GM-CSF, TNF-a and IFN-γ, was induced by repeated exposures to FA fumes. Expression of MMP-1, MMP-3, MMP-7, MMP-10, MMP-12, and MMP-13 was downregulated at the end of the 5-day exposure. Although DNA-damage was not detected by the comet assay, FA exposures downregulated the DNA repair enzymes MGMT and FANCD2, suggesting its possible interference in the DNA repair capacity. Overall, a general concordance was observed between our in vitro responses to FA fume exposures and the reported in vivo toxicity of FA. Our findings provide further evidence supporting the application of the ALI airway system as a potential in vitro alternative for screening and evaluating the respiratory toxicity of inhaled substances.
Assuntos
Formaldeído , Gases , Animais , Carcinógenos , Ensaio Cometa , Epitélio , Formaldeído/efeitos adversos , Formaldeído/toxicidade , Humanos , Hipersensibilidade RespiratóriaRESUMO
Simulation of fine particulate matter (PM2.5) exposure is essential for evaluating adverse health effects. In this work, an ambient exposure system that mimicked real atmospheric conditions was installed in Taiyuan, China to study impacts of chronic PM2.5 exposure on adult and aged mice as well as Sirtuin3 knockout (Sirt3 KO) mice and wild-type (WT) mice. The real-ambient exposure system eliminated the possible artificial effects caused from exposure experiments and maintained the physiochemical characteristics of PM2.5. The case studies indicated that aged mice exhibited apparent heart dysfunction involving increased heart rate and decreased blood pressure after 17-week of real-ambient PM2.5 exposure. Meanwhile, 15-week of real-ambient PM2.5 exposure decreased the heart rate and amounts of associated catecholamines to induce heart failure in Sirt3 KO mice. Additionally, the increased pro-inflammatory cytokines and decreased platelet related indices suggested that inflammation occurred. The changes of biomarkers detected by targeted metabolomics confirmed metabolic disorder in WT and Sirt3 KO mice after exposed to real-ambient PM2.5. These results indicated that the real-ambient PM2.5 exposure system could evaluate the risks of certain diseases associated with air pollution and have great potential for supporting the investigations of PM2.5 effects on other types of rodent models.
Assuntos
Poluentes Atmosféricos , Poluição do Ar , Poluentes Atmosféricos/análise , Poluentes Atmosféricos/toxicidade , Poluição do Ar/análise , Animais , China , Camundongos , Modelos Animais , Material Particulado/análise , Material Particulado/toxicidadeRESUMO
Hydraulic fracturing ("fracking") is a process in which subterranean natural gas-laden rock is fractured under pressure to enhance retrieval of gas. Sand (a "proppant") is present in the fracking fluid pumped down the well bore to stabilize the fissures and facilitate gas flow. The manipulation of sand at the well site creates respirable dust (fracking sand dust, FSD) to which workers are exposed. Because workplace exposures to FSD have exceeded exposure limits set by OSHA, a physico-chemical characterization of FSD along with comprehensive investigations of the potential early adverse effects of FSDs on organ function and biomarkers has been conducted using a rat model and related in vivo and in vitro experiments involving the respiratory, cardiovascular, immune systems, kidney and brain. An undercurrent theme of the overall hazard identification study was, to what degree do the health effects of inhaled FSD resemble those previously observed after crystalline silica dust inhalation? In short-term studies, FSD was found to be less bioactive than MIN-U-SIL® 5 in the lungs. A second theme was, are the biological effects of FSD restricted to the lungs? Bioactivity of FSD was observed in all examined organ systems. Our findings indicate that, in many respects, the physical and chemical properties, and the short-term biological effects, of the FSDs share many similarities as a group but have little in common with crystalline silica dust.
Assuntos
Poluentes Ocupacionais do Ar/efeitos adversos , Exposição por Inalação/efeitos adversos , Areia/química , Administração por Inalação , Animais , Poeira , Humanos , Fraturamento Hidráulico , Exposição Ocupacional/efeitos adversos , Ratos , Dióxido de Silício/efeitos adversosRESUMO
BACKGROUND: Generally considered as a major risk factor for various respiratory diseases, air pollution can also have a significant impact on the skin. To date, there is a plethora of cosmetics products with "anti-pollution" claims. However, these claims have not been fully substantiated with robust scientific evidence and currently there is no standardized method in place for validating the anti-pollution efficacy of cosmetics products. MATERIALS AND METHODS: This article discusses an innovative Controlled Pollution Exposure System (CPES) which allows quantified administration of pollutants on the skin and analysis of their direct impact. Using CPES, human subjects were exposed to ambient dust and ozone and sebum were sampled and analyzed for biomarkers. RESULTS: Following exposure of human subjects' skin to either ambient dust(100-450 µg/cm3 ) or ozone(100-1000 ppb), analysis of sebum revealed a significant decrease in squalene concentration, and significant increases in squalene monohydroperoxide and malondialdehyde concentration. CONCLUSION: The findings demonstrate cutaneous oxidative stress induced by ambient dust and ozone. The findings also demonstrate the efficacy of CPES to accurately measure the direct effect of controlled gaseous and particulate pollutants on human skin and indicate that squalene, squalene monohydroperoxide and malondialdehyde may serve as potent biomarkers for evaluating potential anti-pollution claims of cosmetics products.
Assuntos
Exposição Ambiental/análise , Poluentes Ambientais/toxicidade , Ciência Ambiental , Pele , Cosméticos , Poeira , Ciência Ambiental/instrumentação , Ciência Ambiental/métodos , Humanos , Malondialdeído/análise , Estresse Oxidativo/efeitos dos fármacos , Ozônio/toxicidade , Espécies Reativas de Oxigênio/análise , Sebo/química , Pele/química , Pele/efeitos dos fármacos , Pele/metabolismo , Esqualeno/análiseRESUMO
This paper presents the design of a resonant system for in vitro studies to emulate the exposure of a monolayer of cells to a wireless power transfer system operating at 13.56 MHz. The design procedure targets a system, which maximizes the specific absorption rate (SAR) uniformity on the plane where the layer is cultured, as well as SAR efficiency (defined as SAR over the input power), within the size constraints of a standard incubator. Three resonant wireless power transfer systems with different commonly used loop/coil geometries (cylindrical with circular and square cross-sections and annular) were compared with assess the configuration maximizing the considered design criteria. The system performance in terms of reflection and transmission coefficients, as well as generated E- and H-fields, was characterized numerically and experimentally inside the incubator. Moreover, SAR was computed at the monolayer level. The system equipped with cylindrical coils with square cross-sections led to a high electromagnetic field uniformity in in vitro biological samples. In particular, the uniformities in E and SAR at the layer level were within 7.9% and 5.5%, respectively. This was achieved with the variation in H below the usually considered ±5% limit. © 2020 Bioelectromagnetics Society.
Assuntos
Fontes de Energia Elétrica/efeitos adversos , Campos Eletromagnéticos/efeitos adversos , Exposição à Radiação/análise , Tecnologia sem FioRESUMO
Dry eye syndrome (DES) is a multifactorial condition characterized by insufficient tear lubrication and eye irritation. Air pollutants, including particulate matter (PM), are an emerging threat to human health causing DES and other diseases. However, the pathogenic mechanisms of DES induced by PM exposure remain to be fully elucidated. Recent studies have attempted to create DES animal model using PM exposure. In this study, we explored a novel in vivo exposure model of DES, utilizing an inhalation device (aerosol exposure system) to reproduce the natural exposure to atmospheric PM. Rats were exposed to urban PM (UPM) using this aerosol system for 5 h per day over 5 days. Tear volume in UPM-exposed rats decreased significantly, whereas corneal irregularity and lissamine green staining significantly increased following UPM exposure. Additional effects observed following UPM exposure included apoptosis in the corneal epithelium and a decrease in the number of goblet cells in the conjunctiva. UPM also affected the stability of the tear film by disrupting its mucin-4 layer. In conclusion, aerosol exposure systems have proven effective as assessment tools for DES caused by PM.
Assuntos
Poluentes Atmosféricos/toxicidade , Túnica Conjuntiva/efeitos dos fármacos , Córnea/efeitos dos fármacos , Síndromes do Olho Seco/induzido quimicamente , Material Particulado/toxicidade , Aerossóis , Poluentes Atmosféricos/análise , Animais , Túnica Conjuntiva/metabolismo , Córnea/metabolismo , Modelos Animais de Doenças , Relação Dose-Resposta a Droga , Síndromes do Olho Seco/metabolismo , Feminino , Humanos , Mucina-4/metabolismo , Tamanho da Partícula , Material Particulado/análise , Ratos , Ratos Sprague-DawleyRESUMO
Objective: Complete systems for laboratory-based inhalation toxicology studies are typically not commercially available; therefore, inhalation toxicologists utilize custom-made exposure systems. Here we report on the design, construction, testing, operation and maintenance of a newly developed in vivo rodent ozone inhalation exposure system. Materials and methods: Key design requirements for the system included large-capacity exposure chambers to facilitate studies with large sample sizes, automatic and precise control of chamber ozone concentrations, as well as automated data collection on airflow and environmental conditions. The exposure system contains two Hazelton H-1000 stainless steel and glass exposure chambers, each providing capacity for up to 180 mice or 96 rats. We developed an empirically tuned proportional-integral-derivative control loop that provides stable ozone concentrations throughout the exposure period (typically 3h), after a short ramp time (â¼8 min), and across a tested concentration range of 0.2-2 ppm. Specific details on the combination of analog and digital input/output system for environmental data acquisition, control and safety systems are provided, and we outline the steps involved in maintenance and calibration of the system. Results: We show that the exposure system produces consistent ozone exposures both within and across experiments, as evidenced by low coefficients of variation in chamber ozone concentration and consistent biological responses (airway inflammation) in mice, respectively. Conclusion: Thus, we have created a large and robust ozone exposure system, facilitating future studies on the health effects of ozone in rodents.
Assuntos
Câmaras de Exposição Atmosférica , Sistemas Computacionais , Exposição por Inalação , Ozônio/administração & dosagem , Animais , Desenho de Equipamento , Feminino , Camundongos Endogâmicos C57BL , SoftwareRESUMO
1. Toluene, used as a pure substance or in solvent mixtures, is the cause of occupational exposures of large numbers of workers in the world. The organic anion transporting polypeptides (OATP: human; Oatp: rodents) are drug carriers which have been frequently associated to drug-drug interactions. The objective of this study was to evaluate the influence of inhalation exposure to toluene in Oatp in vivo activity using pravastatin as a probe drug in rats. 2. Male Wistar rats ((n = 6 per sampling time) were exposed to 85 mg/m3 toluene by inhalation or air in a nose only exposure system for 6 h/d, 5 d/week during 4 weeks, in order to simulate the occupational exposure to toluene at level slightly above the occupational exposure limit proposed by the American Conference of Governmental Industrial Hygienists (ACGIH). After 4 weeks of exposure, animals received a single dose of 20 mg/kg pravastatin orally. 3. Areas under concentration × time curves extrapolated to infinite (AUC0-∞) were calculated by Gauss Laguerre quadrature. Non-exposed animals showed AUC0-∞ of 726.0 (261.8) ng h/mL for pravastatin and rats exposed to toluene 85 mg/m3 showed AUC0-∞ of 681.8 (80.1) ng h/mL [data presented as mean (standard error of the mean)]. No significant difference was observed in pravastatin kinetic disposition between groups in terms of 95% confidence interval for the difference between means. 4. Toluene exposure by inhalation did not change the in vivo activity of Oatp evaluated by pravastatin kinetic disposition in rats.
Assuntos
Exposição por Inalação , Sondas Moleculares/farmacologia , Transportadores de Ânions Orgânicos/metabolismo , Pravastatina/farmacologia , Tolueno/toxicidade , Animais , Cinética , Masculino , Pravastatina/sangue , Pravastatina/farmacocinética , Ratos Wistar , Fatores de TempoRESUMO
Ocular injury by lewisite (LEW), a potential chemical warfare and terrorist agent, results in edema of eyelids, inflammation, massive corneal necrosis and blindness. To enable screening of effective therapeutics to treat ocular injury from LEW, useful clinically-relevant endpoints are essential. Hence, we designed an efficient exposure system capable of exposing up to six New-Zealand white rabbits at one time, and assessed LEW vapor-induced progression of clinical ocular lesions mainly in the cornea. The right eye of each rabbit was exposed to LEW (0.2 mg/L) vapor for 2.5, 5.0, 7.5 and 10.0 min and clinical progression of injury was observed for 28 days post-exposure (dose-response study), or exposed to same LEW dose for 2.5 and 7.5 min and clinical progression of injury was observed for up to 56 days post-exposure (time-response study); left eye served as an unexposed control. Increasing LEW exposure caused corneal opacity within 6 h post-exposure, which increased up to 3 days, slightly reduced thereafter till 3 weeks, and again increased thereafter. LEW-induced corneal ulceration peaked at 1 day post-exposure and its increase thereafter was observed in phases. LEW exposure induced neovascularization starting at 7 days which peaked at 22-35 days post-exposure, and remained persistent thereafter. In addition, LEW exposure caused corneal thickness, iris redness, and redness and swelling of the conjunctiva. Together, these findings provide clinical sequelae of ocular injury following LEW exposure and for the first time establish clinically-relevant quantitative endpoints, to enable the further identification of histopathological and molecular events involved in LEW-induced ocular injury.
Assuntos
Arsenicais/efeitos adversos , Substâncias para a Guerra Química/toxicidade , Neovascularização da Córnea/induzido quimicamente , Traumatismos Oculares/induzido quimicamente , Animais , Neovascularização da Córnea/patologia , Opacidade da Córnea/induzido quimicamente , Opacidade da Córnea/patologia , Olho/efeitos dos fármacos , Olho/patologia , Traumatismos Oculares/patologia , CoelhosRESUMO
One of the most interesting questions in bioelectromagnetic and compatibility studies is differences between results of experiments performed in different labs in "identical" conditions, especially in bioelectromagnetics studies. A reason of these differences may be due to differences in investigated objects, particularly in in vivo experiments. However, the author, as engineer, would like to focus the readers' attention on the technical aspects of exposure systems namely: presence and role of mutual interaction between the object under test and the exposure system, interaction between exposure objects, the role of polarization and the similarity of real-life exposure to those applied in experiments, etc. All these factors may change the results of experiments and lead to false conclusions.