Bacteriorhodopsin: Structural Insights Revealed Using X-Ray Lasers and Synchrotron Radiation.

Directional transport of protons across an energy transducing membrane-proton pumping-is ubiquitous in biology. Bacteriorhodopsin (bR) is a light-driven proton pump that is activated by a buried all-trans retinal chromophore being photoisomerized to a 13-cis conformation. The mechanism by which photoisomerization initiates directional proton transport against a proton concentration gradient has been studied by a myriad of biochemical, biophysical, and structural techniques. X-ray free electron lasers (XFELs) have created new opportunities to probe the structural dynamics of bR at room temperature on timescales from femtoseconds to milliseconds using time-resolved serial femtosecond crystallography (TR-SFX). Wereview these recent developments and highlight where XFEL studies reveal new details concerning the structural mechanism of retinal photoisomerization and proton pumping. We also discuss the extent to which these insights were anticipated by earlier intermediate trapping studies using synchrotron radiation. TR-SFX will open up the field for dynamical studies of other proteins that are not naturally light-sensitive.

Multiple retinal isomerizations during the early phase of the bestrhodopsin photoreaction.

Bestrhodopsins constitute a class of light-regulated pentameric ion channels that consist of one or two rhodopsins in tandem fused with bestrophin ion channel domains. Here, we report on the isomerization dynamics in the rhodopsin tandem domains of Phaeocystis antarctica bestrhodopsin, which binds all-trans retinal Schiff-base (RSB) absorbing at 661 nm and, upon illumination, converts to the meta-stable P540 state with an unusual 11-cis RSB. The primary photoproduct P682 corresponds to a mixture of highly distorted 11-cis and 13-cis RSB directly formed from the excited state in 1.4 ps. P673 evolves from P682 in 500 ps and contains highly distorted 13-cis RSB, indicating that the 11-cis fraction in P682 converts to 13-cis. Next, P673 establishes an equilibrium with P595 in 1.2 µs, during which RSB converts to 11-cis and then further proceeds to P560 in 48 µs and P540 in 1.0 ms while remaining 11-cis. Hence, extensive isomeric switching occurs on the early ground state potential energy surface (PES) on the hundreds of ps to µs timescale before finally settling on a metastable 11-cis photoproduct. We propose that P682 and P673 are trapped high up on the ground-state PES after passing through either of two closely located conical intersections that result in 11-cis and 13-cis RSB. Co-rotation of C11=C12 and C13=C14 bonds results in a constricted conformational landscape that allows thermal switching between 11-cis and 13-cis species of highly strained RSB chromophores. Protein relaxation may release RSB strain, allowing it to evolve to a stable 11-cis isomeric configuration in microseconds.

Conformational alterations in unidirectional ion transport of a light-driven chloride pump revealed using X-ray free electron lasers.

Light-driven chloride-pumping rhodopsins actively transport anions, including various halide ions, across cell membranes. Recent studies using time-resolved serial femtosecond crystallography (TR-SFX) have uncovered the structural changes and ion transfer mechanisms in light-driven cation-pumping rhodopsins. However, the mechanism by which the conformational changes pump an anion to achieve unidirectional ion transport, from the extracellular side to the cytoplasmic side, in anion-pumping rhodopsins remains enigmatic. We have collected TR-SFX data of Nonlabens marinus rhodopsin-3 (NM-R3), derived from a marine flavobacterium, at 10-µs and 1-ms time points after photoexcitation. Our structural analysis reveals the conformational alterations during ion transfer and after ion release. Movements of the retinal chromophore initially displace a conserved tryptophan to the cytoplasmic side of NM-R3, accompanied by a slight shift of the halide ion bound to the retinal. After ion release, the inward movements of helix C and helix G and the lateral displacements of the retinal block access to the extracellular side of NM-R3. Anomalous signal data have also been obtained from NM-R3 crystals containing iodide ions. The anomalous density maps provide insight into the halide binding site for ion transfer in NM-R3.

Single-Cell Synchro-Subtractive-Additive Nanoscale Surgery with Femtosecond Lasers.

Herein, an in situ "synchro-subtractive-additive" technique of femtosecond laser single-cell surgery (FLSS) is presented to address the inadequacies of existing surgical methods for single-cell manipulation. This process is enabled by synchronized nanoscale three-dimensional (3D) subtractive and additive manufacturing with ultrahigh precision on various parts of the cells, in that the precise removal and modification of a single-cell structure are realized by nonthermal ablation, with synchronously ultrafast solidification of the specially designed hydrogel by two photopolymerizations. FLSS is a minimally invasive technique with a post-operative survival rate of 70% and stable proliferation. It opens avenues for bottom-up synthetic biology, offering new methods for artificially synthesizing organelle-like 3D structures and modifying the physiological activities of cells.

Femtosecond Laser Fabrication of Three-Dimensional Bubble-Propelled Microrotors for Multicomponent Mechanical Transmission.

Inspired by the reverse thrust generated by fuel injection, micromachines that are self-propelled by bubble ejection are developed, such as microrods, microtubes, and microspheres. However, controlling bubble ejection sites to build micromachines with programmable actuation and further enabling mechanical transmission remain challenging. Here, bubble-propelled mechanical microsystems are constructed by proposing a multimaterial femtosecond laser processing method, consisting of direct laser writing and selective laser metal reduction. The polymer frame of the microsystems is first printed, followed by the deposition of catalytic platinum into the desired local site of the microsystems by laser reduction. With this method, a variety of designable microrotors with selective bubble ejection sites are realized, which enable excellent mechanical transmission systems composed of single and multiple mechanical components, including a coupler, a crank slider, and a crank rocker system. We believe the presented bubble-propelled mechanical microsystems could be extended to applications in microrobotics, microfluidics, and microsensors.

Few-Cycle Surface Plasmon Polaritons.

Surface plasmon polaritons (SPPs) can confine and guide light in nanometer volumes and are ideal tools for achieving electric field enhancement and the construction of nanophotonic circuitry. The realization of the highest field strengths and fastest switching requires confinement also in the temporal domain. Here, we demonstrate a tapered plasmonic waveguide with an optimized grating structure that supports few-cycle surface plasmon polaritons with >70 THz bandwidth while achieving >50% light-field-to-plasmon coupling efficiency. This enables us to observe the─to our knowledge─shortest reported SPP wavepackets. Using time-resolved photoelectron microscopy with suboptical-wavelength spatial and sub-10 fs temporal resolution, we provide full spatiotemporal imaging of co- and counter-propagating few-cycle SPP wavepackets along tapered plasmonic waveguides. By comparing their propagation, we track the evolution of the laser-plasmon phase, which can be controlled via the coupling conditions.

Portable Triboelectric Electrostatic Tweezer for External Manipulation of Droplets within a Closed Femtosecond Laser-Treated Superhydrophobic System.

Controllable droplet manipulation has diverse applications; however, limited methods exist for externally manipulating droplets in confined spaces. Herein, we propose a portable triboelectric electrostatic tweezer (TET) by integrating electrostatic forces with a superhydrophobic surface that can even manipulate droplets in an enclosed space. Electrostatic induction causes the droplet to be subjected to an electrostatic force in an electrostatic field so that the droplet can be moved freely with the TET on a superhydrophobic platform. Characterized by its high precision, flexibility, and robust binding strength, TET can manipulate droplets under various conditions and achieve a wide range of representative fluid applications such as droplet microreactors, precise self-cleaning, cargo transportation, the targeted delivery of chemicals, liquid sorting, soft droplet robotics, and cell labeling. Specifically, TET demonstrated the ability to manipulate internal droplets from the outside of a closed system, such as performing cell labeling experiments within a sealed Petri dish without opening the culture system.

Electrical Transport and Dynamics of Confined DNA through Highly Conductive 2D Graphene Nanochannels.

Confining DNA in nanochannels is an important approach to studying its structure and transportation dynamics. Graphene nanochannels are particularly attractive for studying DNA confinement due to their atomic flatness, precise height control, and excellent mechanical strength. Here, using femtosecond laser etching and wetting transfer, we fabricate graphene nanochannels down to less than 4.3 nm in height, with the length-to-height ratios up to 103. These channels exhibit high stability, low noise, and self-cleaning ability during the long-term ionic current recording. We report a clear linear relationship between DNA length and the residence time in the channel and further utilize this relationship to differentiate DNA fragments based on their lengths, ranging widely from 200 bps to 48.5 kbps. The graphene nanochannel presented here provides a potential platform for label-free analyses and reveals fundamental insights into the conformational dynamics of DNA and proteins in confined space.

Airflow Triggered Water Film Self-Sculpturing on Femtosecond Laser-Induced Heterogeneously Wetted Micro/Nanostructured Surfaces.

Liquid manipulation is essential for daily life and modern industry, and it is widely used in various fields, including seawater desalination, microfluidic robots, and biomedical engineering. Nevertheless, the current research focuses on the manipulation of individual droplets. There are a few projects for water film management. Here, we proposed a facile method of wind-triggered water film self-sculpturing based on a heterogeneous wettability surface, which is achieved by the femtosecond laser direct writing technology and femtosecond laser deposition. Under the conditions of various airflow velocities and water film thicknesses, three distinct behaviors of the water film were analyzed. As a result, when the water film thickness is lower than 4.9 mm, the self-sculpture process will occur until the whole superhydrophobic surface dewetting. Four potential applications are demonstrated, including encryption, oil containers, reconfigurable patterning, and self-splitting devices. This work provides a new approach for manipulating a water film of fluid control engineering.

Photonic Molecule Approach to Multiorbital Topology.

The concepts of topology provide a powerful tool to tailor the propagation and localization of the waves. While electrons have only two available spin states, engineered degeneracies of photonic modes provide novel opportunities resembling spin degrees of freedom in condensed matter. Here, we tailor such degeneracies for the array of femtosecond laser written waveguides in the optical range exploiting the idea of photonic molecules: clusters of strongly coupled waveguides. In our experiments, we observe unconventional topological modes protected by the Z3 invariant arising due to the interplay of interorbital coupling and geometric dimerization mechanism. We track multiple topological transitions in the system with the change in the lattice spacings and excitation wavelength. This strategy opens an avenue for designing novel types of photonic topological phases and states.

Large Field-of-View Nonlinear Holography in Lithium Niobate.

A nonlinear holographic technique is capable of processing optical information in the newly generated optical frequencies, enabling fascinating functions in laser display, security storage, and image recognition. One popular nonlinear hologram is based on a periodically poled lithium niobate (LN) crystal. However, due to the limitations of traditional fabrication techniques, the pixel size of the LN hologram is typically several micrometers, resulting in a limited field-of-voew (FOV) of several degrees. Here, we experimentally demonstrate an ultra-high-resolution LN hologram by using the laser poling technique. The minimal pixel size reaches 200 nm, and the FOV is extended above 120° in our experiments. The image distortions at large view angles are effectively suppressed through the Fourier transform. The FOV is further improved by combining multiple diffraction orders of SH fields. The ultimate FOV under our configuration is decided by a Fresnel transmission. Our results pave the way for expanding the applications of nonlinear holography to wide-view imaging and display.

High-Throughput Two-Photon 3D Printing Enabled by Holographic Multi-Foci High-Speed Scanning.

The emerging two-photon polymerization (TPP) technique enables high-resolution printing of complex 3D structures, revolutionizing micro/nano additive manufacturing. Various fast scanning and parallel processing strategies have been proposed to promote its efficiency. However, obtaining large numbers of uniform focal spots for parallel high-speed scanning remains challenging, which hampers the realization of higher throughput. We report a TPP printing platform that combines galvanometric mirrors and liquid crystal on silicon spatial light modulator (LCoS-SLM). By setting the target light field at LCoS-SLM's diffraction center, sufficient energy is acquired to support simultaneous polymerization of over 400 foci. With fast scanning, the maximum printing speed achieves 1.49 × 108 voxels s-1, surpassing the existing scanning-based TPP methods while maintaining high printing resolution and flexibility. To demonstrate the processing capability, functional 3D microstructure arrays are rapidly fabricated and applied in micro-optics and micro-object manipulation. Our method may expand the prospects of TPP in large-scale micro/nanomanufacturing.

Ultrafast Exciton Dynamics in the Atomically Thin van der Waals Magnet CrSBr.

Among atomically thin semiconductors, CrSBr stands out as both its bulk and monolayer forms host tightly bound, quasi-one-dimensional excitons in a magnetic environment. Despite its pivotal importance for solid-state research, the exciton lifetime has remained unknown. While terahertz polarization probing can directly trace all excitons, independently of interband selection rules, the corresponding large far-field foci substantially exceed the lateral sample dimensions. Here, we combine terahertz polarization spectroscopy with near-field microscopy to reveal a femtosecond decay of paramagnetic excitons in a monolayer of CrSBr, which is 30 times shorter than the bulk lifetime. We unveil low-energy fingerprints of bound and unbound electron-hole pairs in bulk CrSBr and extract the nonequilibrium dielectric function of the monolayer in a model-free manner. Our results demonstrate the first direct access to the ultrafast dielectric response of quasi-one-dimensional excitons in CrSBr, potentially advancing the development of quantum devices based on ultrathin van der Waals magnets.

Differences in change of post-operative antioxidant levels between laser-assisted lenticule extraction and femtosecond laser in situ keratomileusis.

To evaluate the change of total antioxidant capacity (TAC) and ascorbic acid (AA) between femtosecond laser in situ keratomileusis (FS-LASIK) and laser-assisted lenticule extraction (LALEX). A prospective non-randomized study was conducted, and 33 and 75 eyes that had undergone FS-LASIK or LALEX surgeries were enrolled, respectively. The tear films near corneal incisions were collected, and the concentrations of TAC and AA were determined. The generalized linear mixed model was adopted to calculate the adjusted odds ratio (aOR) with 95% confidence interval (CI) of TAC and AA between the two groups. The AA reduction was significant 1 month after the LALEX and FS-LASIK procedures (both p < 0.05), and the decrement in AA level was significantly larger in the FS-LASIK group compared to the LALEX group (p = 0.0002). In the subgroup analysis, the LALEX group demonstrated a lower decrement in TAC level in the individuals with dry eye disease (DED) than the FS-LASIK group (p = 0.0424), and the LALEX group demonstrated a significantly lower AA decrement in the participants with high myopia (p = 0.0165) and DED (p = 0.0043). The LALEX surgery causes lesser AA decrement compared to FS-LASIK surgery especially for the patients with DED.

A Novel Perspective on Enhancing Photocatalytic Performance through the Synergistic Effect of Nd Single Atoms and Heterostructures.

There are few reports on lanthanide single atom modified catalysts, as the role of the 4f levels in photocatalysis is difficult to explain clearly. Here, the synergistic effect of 4f levels of Nd and heterostructures is studied by combining steady-state, transient, and ultrafast spectral analysis techniques with DFT theoretical calculations based on the construction of Nd single atom modified black phosphorus/g-C3N4 (BP/CN) heterojunctions. As expected, the generation rates of CO and CH4 of the optimized heterostructure are 7.44 and 6.85 times higher than those of CN, and 8.43 and 9.65 times higher than those of BP, respectively. The Nd single atoms can not only cause surface reconstruction and regulate the active sites of BP, but also accelerate charge separation and transfer, further suppressing the recombination of electron-hole pairs. The electrons can transfer from g-C3N4:Nd to BP:Nd, with a transfer time of ≈11.4 ps, while the radiation recombination time of electron-hole pairs of g-C3N4 is ≈26.13 µs, indicating that the construction of heterojunctions promotes charge transfer. The 2P1/2/2G9/2/4G7/2/2H11/2/4F7/2→4I9/2 emissions from Nd3+ can also be absorbed by heterostructures, which improves the utilization of light. The energy change of the key rate measurement step CO2 *→COOH* decreases through Nd single atom modification.

Printing 3D Metallic Structures in Porous Matrix.

The fabrication of metallic micro/nanostructures has great potential for advancing optoelectronic microdevices. Over the past decade, femtosecond laser direct writing (FsLDW) technology has played a crucial role in driving progress in this field. In this study, silica gel glass is used as a supporting medium, and FsLDW is employed to reduce gold and palladium ions using 7-Diethylamino-3-thenoylcoumarin (DETC) as a two-photon sensitizer, enabling the printing of conductive multilayered and 3D metallic structures. How the pore size of the silica gel glass affects the electrical conductivity of printed metal wires is systematically examined. This 3D printing method is versatile and offers expanded opportunities for applying metallic micro/nanostructures in optoelectronic devices.

Dual-Atom P-Co-Dy Charge-Transfer Bridge on Black Phosphorus for Enhanced Photocatalytic CO2 Reduction.

The synergistic effect of rare earth single-atoms and transition metal single-atoms may enable us to achieve some unprecedented performance and characteristics. Here, Co-Dy dual-atoms on black phosphorus with a P-Co-Dy charge-transfer bridge are designed and fabricated as the active center for the CO2 photoreduction reaction. The synergistic effect of Co-Dy on the performance of black phosphorus is studied by combining X-ray absorption spectroscopy, ultrafast spectral analysis, and in situ technology with DFT calculations. The results show that the Co and Dy bimetallic active site can promote charge transfer by the charge transfer bridge from P to Dy, and then to Co, thereby improving the photocatalytic activity of black phosphorus. The performance of catalysts excited at different wavelength light indicates that the 4G11/2/2I15/2/4F9/2→6H15/2 and 4F9/2→6H13/2 emissions of Dy can be absorbed by black phosphorus to improve the utilization of sunlight. The in situ DRIFTS and density functional theory (DFT) calculations are used to investigate the CO2 photoreduction pathway. This work provides an depth insight into the mechanism of dual-atom catalysts with enhanced photocatalytic performance, which helps to design novel atomic photocatalysts with excellent activity for CO2 reduction reactions.

Laser-Printed Photoanode: Femtosecond Laser-Induced Crystalline Phase Transformation of WO3 Nanorods for Space-Efficient and Flexible Thin-Film Solar Water-Splitting Cells.

Despite its potential for clean hydrogen harvesting, photoelectrochemical (PEC) water-splitting cells face challenges in commercialization, particularly related its harvesting performance and productivity at an industrial scale. Herein, a facile fabrication method of flexible thin-film photoanode for PEC water-splitting to overcome these limitations, based on laser processing technologies, is proposed. Laser-induced graphene, a carbon structure produced through direct laser writing carbonization (DLWC), plays a dual role: a flexible and stable current collector and a substrate for the hydrothermal synthesis of tungsten trioxide (WO3) nanorods (NRs). To facilitate water-splitting, a femtosecond-pulsed laser (fs laser) is focused on the WO3 NRs, converting their crystalline phase from pristine orthorhombic to monoclinic structure without thermal damage. With NiFe layered double hydroxide (LDH) catalyst, the flexible thin-film photoanode exhibits good PEC performance (1.46 mA cm-2 at 1.23 VRHE) and retains ≈90% of its performance after 3000 bending cycles. With its excellent mechanical properties, the flexible photoanode can be operated in various shapes with different curvatures, enabling space-efficient PEC water-splitting by loading larger photoanode within a given space. This study is expected to contribute to the advancement of large-scale solar water-splitting cells, introducing a new approach to enhance H2/O2 production and expand its application range.

A Mutagen Acts as a Potent Reducing Agent of Glycated Hemoglobin: a Combined Ultrafast Electron Transfer and Computational Studies.

Glycated hemoglobin (GHb) found in mammals undergoes irreversible damage when exposed to external redox agents, which is much more vulnerable than its normal counterpart hemoglobin (Hb). Besides the oxygen regulation throughout the body, Hb plays a vital role in balancing immunological health and the redox cycle. Photoinduced ultra-fast electron transfer phenomena actively participate in regulation of various kind of homeostasis involved in such biomacromolecules. In the present study we have shown that a well-known mutagen Ethidium Bromide (EtBr) reduces GHb in femtosecond time scale (efficiently) upon photoexcitation after efficient recognition in the biomolecule. We have performed similar experiment by colocalizing EtBr and Iron (Fe(III)) on the micellar surface as Hb mimic in order to study the excited state EtBr dynamics to rationalize the time scale obtained from EtBr in GHb and Hb. While other experimental techniques including Dynamic Light Scattering (DLS), Zeta potential, absorbance and emission spectroscopy have been employed for the confirmation of structural perturbation of GHb compared to Hb, a detailed computational studies involving molecular docking and density functional theory (DFT) have been employed for the explanation of the experimental observations.

Development of a portable and cost-effective femtosecond fibre laser synchronizable with synchrotron X-ray pulses.

This study introduces a compact, portable femtosecond fibre laser system designed for synchronization with SPring-8 synchrotron X-ray pulses in a uniform filling mode. Unlike traditional titanium-sapphire mode-locked lasers, which are fixed installations, our system utilizes fibre laser technology to provide a practical alternative for time-resolved spectroscopy, striking a balance between usability, portability and cost-efficiency. Comprehensive evaluations, including pulse characterization, timing jitter and frequency stability tests revealed a centre wavelength of 1600 nm, a pulse energy of 4.5 nJ, a pulse duration of 35 fs with a timing jitter of less than 9 ps, confirming the suitability of the system for time-resolved spectroscopic studies. This development enhances the feasibility of experiments that combine synchrotron X-rays and laser pulses, offering significant scientific contributions by enabling more flexible and diverse research applications.