Metal Electrode-Free Halide Perovskite-Based Flexible Ultraviolet-C Photodetector with Large Area.

Ultraviolet-C (UVC) photodetector has appealed to a numerous number of research owing to its manifold applications in wireless communication, flame monitoring, and medicine. However, in addition to superior performance and high stability of recent studies, scalability and production cost are important factors for commercialization and practical implementation. In this study, a halide perovskite-based UVC photodetector was fabricated using spin-coating process and low-temperature annealing. Corning® Willow® Glass was selected as the substrate for the bottom-illuminated device due to its flexibility and exceptional optical transmission (approximately 60%) in the deep-UV region. The device had a vertical structure with a large active area (1 cm2) owing to the judicious utilization of electrodes. Under bent state with a curvature radius of 25 mm, the as-fabricated device exhibited high response and repeatability with an on/off ratio of 9.57 × 103, a fast response speed of 45/46 ms (rise/fall times) at zero bias under the illumination of a 254-nm UV lamp. The results are based on a flexible and lightweight photodetector without the utilization of notable metal electrodes.

Ultrathin Glass-Based Flexible, Transparent, and Ultrasensitive Surface Acoustic Wave Humidity Sensor with ZnO Nanowires and Graphene Quantum Dots.

Flexible electronic devices are normally based on organic polymer substrate. In this work, an ultrathin glass-based flexible, transparent, and ultrasensitive ZnO/glass surface acoustic wave (SAW) humidity sensor is developed using a composite sensing layer of ZnO nanowires (NWs) and graphene quantum dots (GQDs). It shows much larger effective electromechanical coupling coefficients and signal amplitudes, compared to those of flexible polymer-based SAW devices reported in the literature. Attributed to large specific surface areas of ZnO NWs, large numbers of hydrophilic functional groups of GQDs, as well as the formation of p-n heterojunctions between GQDs and ZnO NWs, the developed ZnO/glass flexible SAW sensor shows an ultrahigh humidity sensitivity of 40.16 kHz/% RH, along with its excellent stability and repeatability. This flexible and transparent SAW sensor has demonstrated insignificant deterioration of humidity sensing performance, when it is bent on a curved surface with a bending angle of 30°, revealing its potential applications for sensing on curved and complex surfaces. The humidity sensing and human breathing detection have further been demonstrated for wearable electronic applications using ultrathin glass-based devices with completely inorganic materials.

An indium tin oxide-free polymer solar cell on flexible glass.

Future optoelectronic devices and their low-cost roll-to-roll production require mechanically flexible transparent electrodes (TEs) and substrate materials. Indium tin oxide (ITO) is the most widely used TE because of its high optical transmission and low electrical sheet resistance. However, ITO, besides being expensive, has very poor performance under mechanical stress because of its fragile oxide nature. Alternative TE materials have thus been sought. Here we report the development of a multilayer TiO2/Ag/Al-doped ZnO TE structure and an ITO-free polymer solar cell (PSC) incorporating it. Electro-optical performances close to those of ITO can be achieved for the proposed TE and corresponding PSC with an additional advantage in their mechanical flexibility, as demonstrated by the fact that the cell efficiency maintains 94% of its initial value (6.6%) after 400 cycles of bending, with 6 and 3 cm maximum and minimum radii, respectively. Instead of common plastic materials, our work uses a very thin (0.14 mm) flexible glass substrate with several benefits, such as the possibility of high-temperature processes, superior antipermeation properties against oxygen and moisture, and improved film adhesion.

Highly Efficient Flexible Perovskite Solar Cells with Antireflection and Self-Cleaning Nanostructures.

Flexible thin film solar cells have attracted a great deal of attention as mobile power sources and key components for building-integrated photovoltaics, due to their light weight and flexible features in addition to compatibility with low-cost roll-to-roll fabrication processes. Among many thin film materials, organometallic perovskite materials are emerging as highly promising candidates for high efficiency thin film photovoltaics; however, the performance, scalability, and reliability of the flexible perovskite solar cells still have large room to improve. Herein, we report highly efficient, flexible perovskite solar cells fabricated on ultrathin flexible glasses. In such a device structure, the flexible glass substrate is highly transparent and robust, with low thermal expansion coefficient, and perovskite thin film was deposited with a thermal evaporation method that showed large-scale uniformity. In addition, a nanocone array antireflection film was attached to the front side of the glass substrate in order to improve the optical transmittance and to achieve a water-repelling effect at the same time. It was found that the fabricated solar cells have reasonable bendability, with 96% of the initial value remaining after 200 bending cycles, and the power conversion efficiency was improved from 12.06 to 13.14% by using the antireflection film, which also demonstrated excellent superhydrophobicity.