RESUMO
By introducing thiourea and ether groups into MQ silicone resin polymer via free radical polymerization, a polyether-thiourea-siloxane (PTS) copolymer was synthesized. The characterization of the synthesized copolymer indicated the occurrence of H-bonding interactions and a narrow molecular weight polydispersity index. Antifouling coatings were produced by incorporating the synthesized copolymer and phenylmethylsilicone oil (PSO). The addition of a minute amount of copolymer enhanced the hydrophobicity of the coating by increasing its surface roughness. However, excessive addition of copolymer resulted in a significant deterioration of the coating surface smoothness. The copolymer improved the mechanical properties of the coating, but excessive addition decreased the crosslinking density and weakened the mechanical performance. With increasing copolymer addition, the leaching of PSO was significantly improved due to the change in the storage form of PSO in the coating caused by the copolymer. Based on the H-bonding interaction of the copolymer, the adhesion strength between the coating and the substrate was significantly improved. However, excessive addition of copolymer did not infinitely enhance the adhesion strength. The antifouling performance demonstrated that an appropriate amount of copolymer could obtain adequate PSO leaching efficiency, thereby effectively enhancing the antifouling performance of the coating. In this study, the prepared coating P12 (12 g of PTS in 100 g of PDMS) showed the most effective antifouling performance.
RESUMO
Zwitterionic polymer coatings facilitate the formation of hydration layers via electrostatic interactions on their surfaces and have demonstrated efficacy in preventing biofouling. They have emerged as a promising class of marine antifouling materials. However, designing multifunctional, environmentally friendly, and natural products-derived zwitterionic polymer coatings that simultaneously resist biofouling, inhibit protein adhesion, exhibit strong antibacterial properties, and reduce algal adhesion is a significant challenge. This study employed two diisocyanates as crosslinkers and natural urushiol and ethanolamine as raw materials. The coupling reaction of diisocyanates with hydroxyl groups was employed to synthesize urushiol-based precursors. Subsequently, sulfobetaine moieties were introduced into the urushiol-based precursors, developing two environmentally friendly and high-performance zwitterionic-functionalized polyurushiol antifouling coatings, denoted as HUDM-SB and IPUDM-SB. The sulfobetaine-functionalized polyurushiol coating exhibited significantly enhanced hydrophilicity, with the static water contact angle reduced to less than 60°, and demonstrated excellent resistance to protein adhesion. IPUDM-SB exhibited antibacterial efficacy up to 99.9% against common Gram-negative bacteria (E. coli and V. alginolyticus) and Gram-positive bacteria (S. aureus and Bacillus. sp.). HUDM-SB achieved antibacterial efficacy exceeding 95.0% against four bacterial species. Furthermore, the sulfobetaine moieties on the surfaces of the IPUDM-SB and HUDM-SB coatings effectively inhibited the growth and reproduction of algal cells by preventing microalgae adhesion. This zwitterionic-functionalized polyurushiol coating does not contain antifouling agents, making it a green, environmentally friendly, and high-performance biomaterial-based solution for marine antifouling.
Assuntos
Incrustação Biológica , Incrustação Biológica/prevenção & controle , Escherichia coli , Staphylococcus aureus , Polímeros/farmacologia , Antibacterianos/farmacologiaRESUMO
Marine biofouling is a worldwide problem in coastal areas and affects the maritime industry primarily by attachment of fouling organisms to solid immersed surfaces. Biofilm formation by microbes is the main cause of biofouling. Currently, application of antibacterial materials is an important strategy for preventing bacterial colonization and biofilm formation. A natural three-dimensional carbon skeleton material, TRP (treated rape pollen), attracted our attention owing to its visible-light-driven photocatalytic disinfection property. Based on this, we hypothesized that TRP, which is eco-friendly, would show antifouling performance and could be used for marine antifouling. We then assessed its physiochemical characteristics, oxidant potential, and antifouling ability. The results showed that TRP had excellent photosensitivity and oxidant ability, as well as strong anti-bacterial colonization capability under light-driven conditions. Confocal laser scanning microscopy showed that TRP could disperse pre-established biofilms on stainless steel surfaces in natural seawater. The biodiversity and taxonomic composition of biofilms were significantly altered by TRP (p < 0.05). Moreover, metagenomics analysis showed that functional classes involved in the antioxidant system, environmental stress, glucose−lipid metabolism, and membrane-associated functions were changed after TRP exposure. Co-occurrence model analysis further revealed that TRP markedly increased the complexity of the biofilm microbial network under light irradiation. Taken together, these results demonstrate that TRP with light irradiation can inhibit bacterial colonization and prevent initial biofilm formation. Thus, TRP is a potential nature-based green material for marine antifouling.
Assuntos
Biofilmes , Incrustação Biológica , Incrustação Biológica/prevenção & controle , Oxidantes/farmacologia , Pólen , Água do Mar/microbiologiaRESUMO
Polysaccharide multilayers consisting of hyaluronic acid and chitosan were prepared by layer-by-layer assembly. To be used in seawater, the multilayers were crosslinked to a different degree using thermal or chemical methods. ATR-FTIR revealed different amide densities as a result of the crosslinking conditions. AFM showed that the crosslinking affected the roughness and swelling behavior of the coatings. The stability and degradability of the multilayers in aqueous environments were monitored with spectroscopic ellipsometry. The resistance of the coatings against non-specific protein adsorption was characterized by SPR spectroscopy. Settlement assays using Ulva linza zoospores and removal assays using the diatom Navicula incerta showed that the slowly degradable coatings were less prone to fouling than the strongly crosslinked ones. Thus, the coatings were a suitable model system to show that crosslinking the multilayers under mild conditions and equipping the coatings with controlled degradation rates enhances their antifouling and fouling-release properties against marine fouling organisms.
Assuntos
Incrustação Biológica , Incrustação Biológica/prevenção & controle , Quitosana , Ácido Hialurônico , Polieletrólitos , Propriedades de Superfície , UlvaRESUMO
A range of amphiphilic polymers with diverse macromolecular architectures has been developed and incorporated into films and coatings with potential for marine antibiofouling applications, without resorting to addition of currently used biocidal, toxic agents. Novel "green" chemical technologies employ different building blocks to endow the polymer film with surface activity, functionality, structure, and reconstruction according to the outer environment as a result of a tailored amphiphilic character of the polymer platform. We emphasise how these features can interplay and add synergistically to affect antifouling and fouling-release against common, widespread marine micro- and macro-fouling organisms.
Assuntos
Incrustação Biológica , Interações Hidrofóbicas e Hidrofílicas , Polímeros/química , Água do Mar/microbiologia , Membranas Artificiais , Microscopia de Força Atômica , Modelos Químicos , Estrutura Molecular , Polietilenoglicóis/química , Polímeros/síntese química , Propriedades de SuperfícieRESUMO
The ideal marine antifouling (AF)/fouling-release (FR) coating should be non-toxic, while effectively either resisting the attachment of marine organisms (AF) or significantly reducing their strength of attachment (FR). Many recent studies have shown that amphiphilic polymeric materials provide a promising solution to producing such coatings due to their surface dual functionality. In this work, poly(ethylene glycol) (PEG) of different molecular weights (Mw = 350, 550) was coupled to a saturated difunctional alkyl alcohol to generate amphiphilic surfactants (PEG-hydrocarbon-OH). The resulting macromolecules were then used as side chains to covalently modify a pre-synthesized PS8 K-b-P(E/B)25 K-b-PI10 K (SEBI or K3) triblock copolymer, and the final polymers were applied to glass substrata through an established multilayer surface coating technique to prepare fouling resistant coatings. The coated surfaces were characterized with AFM, XPS and NEXAFS, and evaluated in laboratory assays with two important fouling algae, Ulva linza (a green macroalga) and Navicula incerta, a biofilm-forming diatom. The results suggest that these polymer-coated surfaces undergo surface reconstruction upon changing the contact medium (polymer/air vs polymer/water), due to the preferential interfacial aggregation of the PEG segment on the surface in water. The amphiphilic polymer-coated surfaces showed promising results as both AF and FR coatings. The sample with longer PEG chain lengths (Mw = 550 g mol(-1)) exhibited excellent properties against both algae, highlighting the importance of the chemical structures on ultimate biological performance. Besides reporting synthesis and characterization of this new type of amphiphilic surface material, this work also provides insight into the nature of PEG/hydrocarbon amphiphilic coatings, and this understanding may help in the design of future generations of fluorine-free, environmentally friendly AF/FR polymeric coatings.
Assuntos
Organismos Aquáticos/efeitos dos fármacos , Incrustação Biológica/prevenção & controle , Polietilenoglicóis/química , Tensoativos/farmacologia , Biofilmes/efeitos dos fármacos , Biofilmes/crescimento & desenvolvimento , Adesão Celular/efeitos dos fármacos , Diatomáceas/fisiologia , Polímeros/química , Água do Mar , Propriedades de Superfície , Tensoativos/química , Ulva/fisiologia , Movimentos da ÁguaRESUMO
Compared with traditional electrolytic technology, directly using photocatalytic materials to produce hypochlorous acid from chlorine-containing water undoubtedly has stronger low-carbon and environmentally-friendly characteristics. However, currently reported materials with photocatalytic chlorine production performance require precious metal Pt for catalysis, which undoubtedly greatly increases production costs. Therefore, developing new types of non-precious metal-based photocatalytic materials for efficient hypochlorous acid synthesis has significant implications. In this study, we demonstrate a novel breakthrough by showing that the WO3/CdS with a Z-scheme structure effectively generated 3.54â mg/L of free chlorine in a 0.5â M NaCl solution, while also exhibiting spectral bactericidal and algal inhibition properties. The Z-scheme structure can effectively prevent carrier recombination and improve photocatalytic efficiency. Therefore, this research provides a novel approach to photocatalytic antifouling and holds significant implications for the application of photocatalytic technology in the marine antifouling industry.
RESUMO
Alginate (Alg) coatings have attracted attention as protective layers on solid surfaces for marine antifouling applications due to their strong water binding capability and environmentally friendly characteristics. However, the effectiveness of Alg coatings in preventing marine fouling diminishes upon interaction with divalent cations present in seawater. To address this issue, post-modification of the Alg coating is conducted. The carboxyl groups of Alg, which are susceptible sites for interaction with divalent cations, are conjugated with polymerization initiators through metal-mediated coordination bond formation. Subsequently, poly(sulfobetaine methacrylate) (poly(SBMA)) brushes are grown from the initiator-immobilized Alg coatings, resulting in the formation of multilayered Alg/poly(SBMA) coatings. In marine diatom adhesion assays using Amphora Coffeaeformis, multilayered Alg/poly(SBMA) coatings exhibited superior antifouling performance compared to single-layered Alg or poly(SBMA) coating controls.
RESUMO
The adherence of pathogenic microorganisms to surfaces and their association to form antibiotic-resistant biofilms threatens public health and affects several industrial sectors with significant economic losses. For this reason, the medical, pharmaceutical and materials science communities are exploring more effective anti-fouling approaches. This review focuses on the anti-fouling properties, structure-activity relationships and environmental toxicity of quaternary ammonium salts (QAS) and, as a subclass, ionic liquid compounds. Greener alternatives such as QAS-based antimicrobial polymers with biocide release, non-fouling (i.e., PEG, zwitterions), fouling release (i.e., poly(dimethylsiloxanes), fluorocarbon) and contact killing properties are highlighted. We also report on dual-functional polymers and stimuli-responsive materials. Given the economic and environmental impacts of biofilms in submerged surfaces, we emphasize the importance of less explored QAS-based anti-fouling approaches in the marine industry and in developing efficient membranes for water treatment systems.
Assuntos
Biofilmes , Incrustação Biológica , Compostos de Amônio Quaternário , Purificação da Água , Compostos de Amônio Quaternário/química , Compostos de Amônio Quaternário/farmacologia , Incrustação Biológica/prevenção & controle , Biofilmes/efeitos dos fármacos , Purificação da Água/métodos , Polímeros/química , Polímeros/farmacologia , Líquidos Iônicos/química , Líquidos Iônicos/toxicidade , Líquidos Iônicos/farmacologiaRESUMO
With the increasing awareness of environmental protection, it is necessary to develop natural product extracts as antifouling (AF) agents for alternatives to toxic biocides or metal-based AF paints to control biofouling. This paper briefly summarizes the latest developments in the natural product extracts and their derivatives or analogues from marine microorganisms to terrestrial plants as AF agents in the last five years. Moreover, this paper discusses the structures-activity relationship of these AF compounds and expands their AF mechanisms. Inspired by the molecular structure of natural products, some derivatives or analogues of natural product extracts and some novel strategies for improving the AF activity of protective coatings have been proposed as guidance for the development of a new generation of environmentally friendly AF agents.
RESUMO
Benzoxazine resins are new thermosetting resins with excellent thermal stability, mechanical properties, and a flexible molecular design, demonstrating promise for applications in marine antifouling coatings. However, designing a multifunctional green benzoxazine resin-derived antifouling coating that combines resistance to biological protein adhesion, a high antibacterial rate, and low algal adhesion is still challenging. In this study, a high-performance coating with a low environmental impact was synthesized using urushiol-based benzoxazine containing tertiary amines as the precursor, and a sulfobetaine moiety into the benzoxazine group was introduced. This sulfobetaine-functionalized urushiol-based polybenzoxazine coating (poly(U-ea/sb)) was capable of clearly killing marine biofouling bacteria adhered to the coating surface and significantly resisting protein attachment. poly(U-ea/sb) exhibited an antibacterial rate of 99.99% against common Gram negative bacteria (e.g., Escherichia coli and Vibrio alginolyticus) and Gram positive bacteria (e.g., Staphylococcus aureus and Bacillus sp.), with >99% its algal inhibition activity, and it effectively prevented microbial adherence. Here, a dual-function crosslinkable zwitterionic polymer, which used an "offensive-defensive" tactic to improve the antifouling characteristics of the coating was presented. This simple, economic, and feasible strategy provides new ideas for the development of green marine antifouling coating materials with excellent performance.
RESUMO
Although many antibiofouling materials have been developed based on either bacterial-killing or antiadhesion effects, the integration of both the effects in one material remains challenging for achieving highly enhanced synergistic antibiofouling. In this study, we have explored a nano-CeO2-loaded double-network hydrogel by introducing CeO2 nanorods into a polyzwitterionic hydrogel via a simple one-pot method for achieving highly efficient antifouling. First, the CeO2 nanorods dispersed in the hydrogel, as an outstanding nanozyme, have highly efficient bacterial-killing performance. Second, the superhydrophilic polyzwitterionic hydrogel provides a dense hydrated layer on the surface and subsequently excellent broad-spectrum antiadhesion behavior. Most importantly, the bacterial killing and antiadhesion of this hydrogel can work synergistically to largely improve the marine-antifouling performance. Moreover, the double-network structure of this hydrogel, including the covalently cross-linked polyzwitterion hard network and the physically cross-linked poly(vinyl alcohol) soft network, can provide greatly improved mechanical properties (2.44 MPa of tensile strength reaches and 21.87 MPa of compressive strength). As a result, among the existing marine-antifouling hydrogels, the CeO2-loaded polyzwitterionic double-network hydrogel can achieve outstanding antifouling performance, which can sustain for over 6 months in a real marine environment. This work provides a promising marine-antifouling hydrogel, which will also inspire antifouling research of a new strategy and materials.
RESUMO
Nanomaterial-incorporated surfaces with microstructures have been widely used for marine antifouling coatings, yet limited green antifouling coatings are currently available for sustainable application, given the potential environmental effects of nanomaterial-based nanofillers. Here, by using natural sourced nanomaterials (cellulose nanocrystals, CNCs) as nanofillers, a nanocomposite superhydrophobic coating was fabricated via a simple sol-gel synthesis method. Notably, CNCs were firstly applied in the marine antifouling realm to form uniform and stable coatings, which were condensed with hydroxyl groups of hydrolyzed tetrapropyl zirconate, 3-glycidyloxypropyltrimethoxysilane, and methyltrimethoxysilane. The synthesized coatings gained a biomimetic microscopic ridge-like surface, where more CNCs contents contributed to finer microstructures. As a result of the influence of CNCs content on surface wettability and antifouling properties, the coating with CNCs accounting for 20 wt% of the total solid content (CNC20) delivered the best antifouling performance. Furthermore, 90-day marine field tests verified CNC20's excellent antifouling ability, reducing fouling by 82 % in comparison to the control group. Such a biomimicry study provides a novel strategy for the development of environmentally friendly coatings with CNCs nanofillers.
Assuntos
Incrustação Biológica , Nanopartículas , Celulose/química , Incrustação Biológica/prevenção & controle , Molhabilidade , Nanopartículas/químicaRESUMO
Biofouling is the buildup of marine organisms on a submerged material. This research tests the efficacy of phosphonium ion gels comprising phosphonium monomers ([P444VB][AOT] and [P888VB][AOT]) and free ionic liquid ([P4448][AOT], [P88814][AOT]) (10 to 50 wt%), varying copper(II) oxide biocide concentrations (0 to 2 wt%), and the docusate anion [AOT]- for added hydrophobicity. The efficacy of these formulations was tested using a seachest simulator protected from light and tidal currents in New Zealand coastal waters over the summer and autumn periods. Anti-fouling performance was correlated with the hydrophobicity of the surface (water contact angle: 14-131°) and biocide concentration. Formulations with higher hydrophobicity (i.e., less free ionic liquid and longer alkyl chain substituents) displayed superior anti-fouling performance. The presence of the copper(II) biocide negatively affected anti-fouling performance via significant increases to hydrophilicity. No correlation was observed between antimicrobial activity and anti-fouling performance. Overall, phosphonium ion gels show potential for combining anti-fouling and foul release properties.
RESUMO
A marine antifouling compound, N-octyl-2-hydroxybenzamide (OHBA), inspired by ceramide and paeonol molecules, was created. First, methyl salicylate was synthesized with salicylic acid and methanol, followed by n-octylamine through an ester-amine condensation reaction. Fourier transform infrared spectroscopy, nuclear magnetic resonance spectroscopy, and mass spectrometry confirmed the characteristic structure of the OHBA compound. Bioassays showed that OHBA inhibits the growth of typical marine fouling organisms, such as Vibrio azureus, Navicula subminuscula, Ulva pertusa, Mytilus edulis, and Amphibalanus amphitrite, indicating its broad-spectrum antifouling ability. A one-year marine real-sea test further demonstrated the excellent antifouling properties of OHBA. OHBA is also extremely biodegradable, with a half-life of 6.3 days, making it a less environmentally harmful replacement for widely-used heavy metal-containing antifoulants.
RESUMO
Fluorescent antifouling and photocatalytic antifouling technologies have shown potential in the field of marine antifouling. SLAP@g-C3N4/PDMS (SLAP@CN/PDMS) composite antifouling coatings were designed and prepared using g-C3N4, sky-blue long afterglow phosphor (SLAP), and polydimethylsiloxane (PDMS). The fluorescence emitted by SLAP under dark conditions was used to excite g-C3N4 for fluorescent photocatalysis and to prolong the photocatalytic activity of g-C3N4. Key data were collected by testing and characterization and are presented in this work. The results showed that g-C3N4 was successfully coated on the SLAP surface and formed a heterogeneous structure. After the composite powder was added to the PDMS coating, the coating maintained low surface energy but enhanced the surface roughness of the coating. The experimental results of degraded Rhodamine B (RhB) showed that SLAP prolonged the g-C3N4 photocatalytic activity time. The anti-marine bacterial adhesion performance of the coating was investigated by bacterial adhesion experiments. The results showed that SLAP@CN could effectively improve the anti-bacterial adhesion performance of PDMS coating, in which the anti-bacterial adhesion performance of SLAP@CN-2.5/PDMS was improved by nearly 19 times. This antifouling coating introduces fluorescent antifouling, photocatalytic antifouling, and fluorescence-driven photocatalytic antifouling based on the low surface energy antifouling of silicones and achieves "all-weather" fluorescent photocatalytic antifouling.
RESUMO
Since biofouling challenges negatively influence the marine and transportation industries, developing effective antifouling materials have attracted extensive concern. A tyrosine-based antifouling phenolic resin (TPP resin) was synthesized using tyrosine as a natural phenol source. TPP exhibited shell-like surface morphology with micro-ripples and excellent anti-adhesion properties against bacteria and diatom. The micro-ripples surface might be caused by the strong hydrogen bonding or ionic interaction among tyrosine units resulting in microphase separation during the curing process. Tyrosine content in TPP resin has a great influence on the surface properties, morphology and antifouling characteristics. The higher the tyrosine content, the higher is the surface hydrophilicity, the denser and more regular is the micro-ripples morphology, and the stronger is the antifouling performance. TPP-60 % exhibited the best antifouling performance. Combination of the surface hydrophilicity and regular micro-ripples surface morphology afford TPP excellent antifouling performance. TPP resins offer a broad prospect for developing phenolic resin in the antifouling field.
Assuntos
Incrustação Biológica , Incrustação Biológica/prevenção & controle , Formaldeído , Interações Hidrofóbicas e Hidrofílicas , Fenóis/farmacologia , Polímeros , Propriedades de Superfície , TirosinaRESUMO
An inorganic-organic composite coating is an effective way to solve the issue of marine organism attachment and realize multi-element synergistic antifouling. Herein, Bi2WO6/boron-grafted polyurethane composite coatings (BWOB) composed of Bi2WO6 with three morphologies (nanosheet, flower and microsphere) and boron-grafted polyurethane (ITB) were successfully synthesized to achieve high-efficiency antifouling. Bi2WO6 nanoparticles were evenly distributed on the surface and inside the ITB to form micro/nanostructures. In the composite coatings doped with flower-shaped Bi2WO6, BWOB-5 showed excellent antibacterial and antidiatom adhesion properties, achieving 95.43% and 98.38% against Escherichia coli and Staphylococcus aureus, respectively, and 98.62% against Nitzschia closterium. In addition, the micro/nanostructure on the surface, the stable production of hydroxyl radicals (·OH) and superoxide radicals (·O2-) during photocatalysis, and the antifouling functional groups of the resin matrix in the BWOB composite coatings were all conducive to photocatalytic antifouling activity. More importantly, BWOB coatings exhibited excellent environmentally friendly properties. Therefore, BWOB coatings are expected to have potential application value in the field of photocatalytic sterilization and antifouling.
Assuntos
Incrustação Biológica , Poliuretanos , Incrustação Biológica/prevenção & controle , Boro , Escherichia coli , Poliuretanos/farmacologia , Staphylococcus aureus , Propriedades de SuperfícieRESUMO
Marine fouling on concrete has become one of the severest problems that damage the surface and even cause internal corrosion of marine concrete. Dissimilarly to the previous abuse of toxic antifoulants, developing hydrophobic waterborne antifouling materials could be regarded as one of the most environment-friendly and potential directions to protect marine concrete. However, the insufficient hydrophobicity, antifouling, and mechanical properties limit their application. Herein, we reported a series of hybrid coatings combining hyperbranched polyglycerol (HPG) decorated waterborne fluoro silicone polyurethane (H) and HPG-grafted graphene oxide (G-HPG) that improve the hydrophobicity, antifouling, and mechanical properties. The hybrid materials were modified by the hyperbranched polyglycerol synthesized based on the anionic-ring-opening reaction between glycerol and ethylene glycol or polyethylene glycol. Remarkably, the hydrophobicity (115.19°) and antifouling properties (BSA absorption of 2.33 µg/cm2 and P. tricornutum attachment of 1.289 × 104 CFU/cm2) of the materials could be developed by the modification of HPG with higher generation numbers and backbone molecular weights. Moreover, the mechanical properties negligibly decreased (tensile strength decreased from 11.29 MPa to 10.49 MPa, same pencil hardness and adhesion grade as H of 2H and grade 2). The results revealed that the HPG of higher generation numbers and backbone molecular weights could benefit materials with enhanced antifouling properties and hydrophobicity. The method of hyperbranched modification can be regarded as potentially effective in developing the durability and antifouling properties of marine antifouling materials.
RESUMO
Semiconductor photocatalytic materials have shown potential in the field of antifouling due to their good antibacterial properties, stability, and nontoxic properties. It is an effective way to use them to improve the static antifouling performance of silicone antifouling coatings. g-C3N4/TNTs/CNTs (CNTC) photocatalytic composite powders were prepared and introduced into polydimethylsiloxane (PDMS) coatings to enhance their antifouling performance. Firstly, g-C3N4/TNTs with heterostructure were thermally polymerized by urea and TiO2 nanotubes (TNTs), and then g-C3N4/TNTs and multi-walled carbon nanotubes (CNTs) were composited to obtain CNTC. Finally, CNTC was added into PDMS to prepare g-C3N4/TNTs/CNTs/PDMS (CNTC/P) composite antifouling coating. The results showed that CNTC successfully recombined and formed a heterostructure, and the recombination rate of photogenerated carriers decreased after recombination. The addition of CNTC to PDMS increased the hydrophobicity and roughness while reducing the surface energy (SE) of the coatings. CNTC could effectively improve the anti-attachment performance of PDMS coatings to bacteria and benthic diatom. The bacterial attachment rate (AB) and benthic diatom attachment rate (AD) of CNTC/P-20 were, respectively, 13.1% and 63.1%; they are much lower than that of the coating without photocatalytic composite powder. This coating design provides a new idea for developing new "efficient" and "green" photocatalytic composite antifouling coatings.