[Determination of 13 chemical components of Epimedii Folium in pharmacopoeia by UPLC method combined with quantitative analysis of multicomponents by single-marker].

The quantitative analysis of multicomponents by single-marker(QAMS) was established for 13 chemical components of Epimedii Folium, including neoglycolic acid, chlorogenic acid, cryo-chlorogenic acid, magnolidine, hypericin, epimedin A, epimedin B, epimedin C, icariin, baohuoside Ⅱ, sagittatoside A, icariin subside Ⅰ, and baohuoside Ⅰ, so as to investigate the feasibility and accuracy of this method in evaluating the quality of Epimedii Folium materials from different origins and different varieties. Through the scientific and accurate investigation of the experimental method, the external standard method was used to determine the content of 13 chemical components in epimedium brevieornu. At the same time, icariin was used as the internal standard, and the relative correction factors of icariin with neoglycolic acid, chlorogenic acid, cryo-chlorogenic acid, magnolidine, hypericin, epimedin A, epimedin B, epimedin C, icariin, baohuoside Ⅱ, sagittatoside A, icariin subside Ⅰ, and baohuoside Ⅰ were established, respectively. The contens of neoglycolic acid, chlorogenic acid, cryo-chlorogenic acid, magnolidine, hypericin, epimedin A, epimedin B, epimedin C, icariin, baohuoside Ⅱ, sagittatoside A, icariin subside Ⅰ, and baohuosideⅠ in Epimedii Folium were calculated by QAMS. Finally, the difference between the measured value and the calculated value was compared to verify the accuracy and scientific nature of QAMS in the determination. The relative correction factor of each component had better repeatability, and there was no significant difference between the results of the external standard method and those of QAMS. With icariin as the internal standard, QAMS simultaneously determining neoglycolic acid, chlorogenic acid, cryo-chlorogenic acid, magnolidine, hypericin, epimedin A, epimedin B, epimedin C, icariin, baohuoside Ⅱ, sagittatoside A, icariin subside Ⅰ, and baohuoside Ⅰ can be used for quantitative analysis of Epimedii Folium.

[Quality control method for phenolic acid components in abandoned stems and leaves of Artemisia selengensis based on UPLC fingerprint combined with quantitative analysis of multi-components by single marker (QAMS)].

This study established an ultra-performance liquid chromatography(UPLC) fingerprint of abandoned stems and leaves of Artemisia selengensis and quantitative analysis of multi-components by single marker(QAMS) for five phenolic acid components. Waters Acquity UPLC BEH C_(18) chromatography column(2.1 mm×100 mm, 1.7 µm) was used. The gradient elution was carried out with the mobile phase composed of 0.1% phosphoric acid water and acetonitrile at a flow rate of 0.3 mL·min~(-1) and a column temperature at 30 ℃. The detection wavelength was 330 nm, and the injection volume was 2 µL. Similarity evaluation and cluster analysis were conducted on the fingerprint data, and 15 common components in 13 batches of abandoned stems and leaves of A. selengensis were identified. The relative correction factors of ferulic acid, isochlorogenic acid A, isochlorogenic acid B, and isochlorogenic acid C were calculated using chlorogenic acid as the internal reference. The QAMS for determining five components in the abandoned stems and leaves of A. selengensis was established. At the same time, the content of these five components was determined using the external standard method(ESM), and the results showed that there were no significant differences in their content determined by the QAMS and the ESM. The results indicated that the content of phenolic acid components in the abandoned stems and leaves of A. selengensis from different varieties and different origins had obvious differences. In addition, the content of phenolic acid components in the abandoned stems and leaves of lignified A. selengensis was significantly higher than that of non-lignified A. selengensis. In summary, QAMS established in this study can be quickly, accurately, and economically used to determine the content of five phenolic acid components in abandoned stems and leaves of A. selengensis, laying a foundation for the resource development and utilization of abandoned stems and leaves of A. selengensis.

Multicomponent Hybridization Transition Metal Oxide Electrode Enriched with Oxygen Vacancy for Ultralong-Life Supercapacitor.

Transition metal oxide electrode materials for supercapacitors suffer from poor electrical conductivity and stability, which are the research focus of the energy storage field. Herein, multicomponent hybridization Ni-Cu oxide (NCO-Ar/H2 -10) electrode enriched with oxygen vacancy and high electrical conductivity including the Cu0.2 Ni0.8 O, Cu2 O and CuO is prepared by introducing Cu element into Ni metal oxide with hydrothermal, annealing, and plasma treatment. The NCO-Ar/H2 -10 electrode exhibits high specific capacity (1524 F g-1 at 3 A g-1 ), good rate performance (72%) and outstanding cyclic stability (109% after 40,000 cycles). The NCO-Ar/H2 -10//AC asymmetric supercapacitor (ASC) achieves high energy density of 48.6 Wh kg-1 at 799.6 W kg-1 while exhibiting good cycle life (117.5% after 10,000 cycles). The excellent electrochemical performance mainly comes from the round-trip valence change of Cu+ /Cu2+ in the multicomponent hybridization enhance the surface capacitance during the redox process, and the change of electronic microstructure triggered by a large number of oxygen vacancies reduce the adsorption energy of OH- ions of thin nanosheet with crack of surface edge, ensuring electron and ion-transport processes and remitting the structural collapse of material. This work provides a new strategy for improving the cycling stability of transition metal oxide electrode materials.

Quantitative multicomponent analysis of a single marker-based simultaneous determination and quality assessment of nucleoside analogs from Qi Zhi capsules.

Qi Zhi capsule (QZC) is approved by the State Drug Administration of China. The QZC consists of nine crude drugs, including astragalus, leeches, ground beetles, curcuma zedoary, hawthorn, semen cassiae, rhizoma sparganii, polygonum multiflorum, and peach kernel, of which leeches and ground beetles are Traditional Chinese Medicine of animal origin. Nucleosides are animal substances with pharmacological effects that are easy to extract and quantify. Different nucleoside analogs in distinct animal-based formulations can be used to characterize animal-based medicines. However, the quality control of a single indicator does not reflect the overall quality of Chinese medicine. Here, we developed a method to simultaneously determine the nucleoside analogs uracil, xanthine, hypoxanthine, uridine, guanine, and uric acid in QZCs using high-performance liquid chromatography. Hypoxanthine was used as an internal reference to determine relative correction factors for the other five components. The six components were determined in ten different batches of QZCs. There was no significant difference between the quantitative multicomponent analysis of a single marker and the external standard method. The relative standard deviation of total nucleosides analogs of 10 batches of samples was 7%. This method can be applied to simultaneously determine multiple active components in QZCs and other nucleoside analog drugs, enabling multi-indicator quality control.

Comprehensive quality evaluation of Tangwei capsule based on HPLC-QAMS multi-index quantitative determination combined with chemometrics and EW-TOPSIS method. / é«˜æ•ˆæ¶²ç›¸ä¸€æµ‹å¤šè¯„æ³•å¤šæŒ‡æ ‡æˆåˆ†å®šé‡è”åˆåŒ–å­¦è®¡é‡å­¦ã€ç†µæƒä¼˜åŠ£è§£è·ç¦»æ³•ç”¨äºŽç³–ç»´èƒ¶å›Šç»¼åˆè´¨é‡è¯„ä»·.

OBJECTIVES: To detect the contents of Tangwei capsule main components with high performance liquid chromatography-quantitative analysis of multicomponents by single marker (HPLC-QAMS) method and to evaluate the quality with chemometrics and entropy weight-technique for order preference by similarity to an ideal solution (EW-TOPSIS). METHODS: A symmetry C18 column and 0.1% formic acid-acetonitrile as mobile phase were used for HPLC of Tangwei capsule. The contents of 3'-hydroxypuerarin, puerarin, 3'-methoxypuerarin, methylnissolin-3-O-glucoside, calycosin, formononetin, rosmarinic acid, salvianolic acid B, dihydrotanshinone Ⅰ, cryptotanshinone, tanshinone Ⅰ, tanshinone ⅡA and cucurbitacin B in 15 batches of Tangwei capsule were determined simultaneously. The quality differences of 15 batches of samples were analyzed by chemometrics and EW-TOPSIS. RESULTS: The HPLC-UV showed that 13 components had good linear relationships in corresponding concentration ranges (r≥0.9991). The relative standard deviations (RSD) of precision, repeatability and stability were all less than 2.00%. The average recovery rates were between 96.86% and 100.13%, and RSD were all less than 2.00%. Cluster analysis showed that 15 batches of samples were clustered into 3 groups. Partial least squares-discriminant analysis showed that salvianolic acid B, formononetin, puerarin, 3'-methoxypuerarin and rosmarinic acid were the main potential markers affecting the quality of Tangwei capsule. EW-TOPSIS analysis showed that the quality of S12-S15 was superior. CONCLUSIONS: The analytical method established in this study can be used for the comprehensive evaluation of the quality of Tangwei capsule to provide laboratory support for its quality control and overall evaluation.

[Quality evaluation of Compound Cheqian Tablets based on UPLC-Q-TOF-MS/MS, network pharmacology and "double external standards" QAMS].

The Compound Cheqian Tablets are derived from Cheqian Power in Comprehensive Recording of Divine Assistance, and they are made by modern technology with the combination of Plantago asiatica and Coptis chinensis. To investigate the material basis of Compound Cheqian Tablets in the treatment of diabetic nephropathy, in this study, the chemical components of Compound Cheqian Tablets were characterized and analyzed by UPLC-Q-TOF-MS/MS, and a total of 48 chemical components were identified. The identified chemical compounds were analyzed by network pharmacology. By validating with previous literature, six bioactive compounds including acteoside, isoacteoside, coptisine, magnoflorine, palmatine, and berberine were confirmed as the index components for qua-lity evaluation. Furthermore, the content of the six components in the Compound Cheqian Tablets was determined by the "double external standards" quantitative analysis of multi-components by single marker(QAMS), and the relative correction factor of isoacteoside was calculated as 1.118 by using acteoside as the control; the relative correction factors of magnoflorine, palmatine, and berberine were calculated as 0.729, 1.065, and 1.126, respectively, by using coptisine as the control, indicating that the established method had excellent stability under different conditions. The results obtained by the "double external standards" QAMS approximated those obtained by the external standard method. This study qualitatively characterized the chemical components in the Compound Cheqian Tablets by applying UPLC-Q-TOF-MS/MS and screened the pharmacodynamic substance basis for the treatment of diabetic nephropathy via network pharmacology, and primary pharmacodynamic substance groups were quantitatively analyzed by the "double external stan-dards" QAMS method, which provided a scientific basis for clarifying the pharmacodynamic substance basis and quality control of Compound Cheqian Tablets.

Chromatographic fingerprint combined with quantitative analysis of multi-components by single-marker for quality control of total lignans from Fructus arctii by high-performance liquid chromatography.

INTRODUCTION: The total lignans from Fructus arctii (TLFA) is a mixture of a series of lignans isolated from dried ripe fruit of Arctium lappa L. We previously reported on the pharmacological activity of TLFA that is related to diabetes. An accurate and practical TLFA quantitative analysis method for utilising it needs to be established. OBJECTIVE: This study aimed to develop an effective quantitative analysis method for assessing the TLFA quality. METHODS: A total of 11 marker components were confirmed by analysing the high-performance liquid chromatography fingerprints of 24 batches of TLFA samples. The samples were prepared from TLFA and structurally identified as lappaol H, lappaol C, arctiin, arctignan D, arctignan E, matairesinol, arctignan G, isolappaol A, lappaol A, arctigenin, and lappaol F. In the quantitative analysis of multi-components by the single-marker (QAMS) method and with arctiin as an internal reference substance, the content of these lignans in TLFA was simultaneously determined according to their relative correction factors with arctiin. RESULTS: There was no significant difference between results measured by the QAMS and traditional external standard methods. Hierarchical cluster and principal component analyses were performed to evaluate 24 TLFA batches based on the contents of 10 marker components. The results revealed that QAMS method combined with chemometric analyses could accurately measure and clearly distinguish the different quality samples of TLFA. CONCLUSION: The QAMS method is a reliable and promising quality control method for TLFA. It can provide a reference for promoting quality control of complex multi-component systems, especially for traditional Chinese medicine.

Quality Assessment of Artemisia rupestris L. Using Quantitative Analysis of Multi-Components by Single Marker and Fingerprint Analysis.

The chromatographic fingerprint of 14 batches of Artemisia rupestris L. samples were established in this study. The constituents of ten components in Artemisia rupestris L. were determined using quantitative analysis of multi-components by single marker (QAMS) and the external standard method (ESM). Due to their stability and accessibility, chlorogenic acid and linarin were used as references to calculate the relative correction factors (RCFs) of apigenin-C-6,8-pentoside-hexoside, apigenin-C-6,8-di-pentoside, luteolin, 3,4-dicaffeoylquinic acid, 3,5-dicaffeoylquinic acid, 4,5-dicaffeoylquinic acid, chrysosplenetin B, and sbsinthin, based on high-performance liquid chromatography (HPLC). The value calculated by QAMS was consistent with that of the ESM, and the reproducibility of RCFs was found to be reliable. In conclusion, simultaneous determination of the ten components by the QAMS method and chromatographic fingerprint analysis were feasible and accurate in evaluating the quality of Artemisia rupestris L. and can be used as reference in traditional Chinese medicine quality control.

[Chemical pattern recognition of Atractylodes chinensis from different producing areas and establishment of quantitative analysis of multi-components by single marker (QAMS) method for four components].

This study established the fingerprint and combined it with chemical pattern recognition to evaluate the quality of Atractylodes chinensis samples from different producing areas and then employed the quantitative analysis of multi-components by single marker(QAMS) method to verify the feasibility and applicability of the established method in the quality evaluation of A. chinensis. The fingerprints of A. chinensis samples were constructed via high performance liquid chromatography(HPLC) to evaluate the inter-batch consistency. With the quality control component atractylodin as the internal reference, the relative correction factors(RCFs) were established for atractylenolide Ⅰ, atractylenolide Ⅲ, and ß-eudesmol and the content of the four components was calculated. The external standard method was used to verify the accuracy of QAMS method. The quality of A. chinensis was further evaluated by similarity analysis, clustering analysis, and principal component analysis. The fingerprints of 13 batches of samples were calibrated with 21 common peaks, and 4 common peaks were identified with the similarities all above 0.9. The RCFs established with atractylodin as the internal reference represented good reproducibility under different experimental conditions. Specifically, the RCFs of atractylenolide Ⅰ, atractylenolide Ⅲ, and ß-eudesmol in A. chinensis were 2.091, 4.253, and 6.010, respectively. QAMS and ESM showed no significant difference in the results, indicating that the QAMS method established in this study was stable and reliable. Thus, HPLC fingerprint combined with QAMS can be used for the quality evaluation of A. chinensis, providing a basis for comprehensive and rapid quality evaluation of A. chinensis.

[Quality evaluation of Psoraleae Fructus based on QAMS method and TLC identification].

The present study established a determination method of Psoraleae Fructus by quantitative analysis of multi-components by the single marker(QAMS) and further improved the thin-layer chromatography(TLC) method. The QAMS method was established by UPLC with psoralen as the internal marker, and the content of psoralenoside, isopsoralenoside, psoralen, and isopsoralen was simultaneously determined. As revealed by the comparison with results of the external standard method, the QAMS method was accurate and feasible. According to the current quality standards of Psoraleae Fructus, the TLC method was further optimized and improved, and bakuchiol was added for identification based on the original TLC method with psoralen and isopsoralen as indicators. This study provides a reference for improving the quality control method of Psoraleae Fructus.

[Establishment and verification of quality evaluation method of Jizhi Syrup based on quantitative analysis of multi-components by single marker].

A quantitative analysis of multi-components by single marker(QAMS) method was established for the simultaneous determination of ephedrine hydrochloride, protocatechuic acid, 5-caffeoylquinic acid, 4-hydroxybenzoic acid, naringin, neohesperidin, glycyrrhizic acid, and praeruptorin A in Jizhi Syrup by high performance liquid chromatography(HPLC) with ultraviolet multi-wavelength detection system, and its feasibility in quality evaluation of Jizhi syrup was verified. With naringin as the internal reference substance, the relative correction factors and chromatographic peak localization methods of other seven components were respectively established at 210, 254, 280, and 320 nm. The method reproducibility was validated, and the result of QAMS were compared with those obtained by the external standard method(ESM) to verify the accuracy and feasibility of the method. The relative correction factors of ephedrine hydrochloride, protocatechuic acid, 5-caffeoylquinic acid, 4-hydroxybenzoic acid, neohesperidin, glycyrrhizic acid, and praeruptorin A with naringin as reference were 0.846, 0.582, 0.608, 0.293, 0.913, 2.207, and 0.940, respectively, which presented excellent reproducibility under different experimental conditions. Furthermore, QAMS and ESM showed no significant difference in the results for 15 batches of samples. Except protocatechuic acid and 5-caffeoylquinic acid, other six compounds were the exclusive components of single medicinal materials. In addition, glycyrrhizic acid and praeruptorin A were identified in the Jizhi Syrup for the first time, filling up the blank of no component detected in Glycyrrhizae Radix et Rhizoma and Peucedani Radix. The method established in this study is convenient, efficient, specific, accurate, and reliable, which can comprehensively and effectively evaluate the quality of Jizhi Syrup to ensure the safety and efficacy of this drug in clinical application.

[Determination of content of nine components in Xinnaojian preparations from different manufacturers by QAMS].

This study established the ultra-performance liquid chromatography(UPLC) fingerprint of Xinnaojian preparations. With epicatechin gallate as the internal reference substance, a quantitative analysis of multi-components by single marker(QAMS) method for determining the content of nine components(gallic acid, epigallocatechin, catechin, caffeine, epicatechin, epigallocatechin gallate, gallocatechin gallate, epicatechin gallate, and catechin gallate) in Xinnaojian preparations was established. The content determined by the external standard method(ESM) and QAMS method was compared to evaluate the feasibility and accuracy of QAMS method. The results showed that the standard curves of nine components had good linear relationship within the test concentration ranges. The average recoveries were 87.57%-107.4%, and the RSD was 1.5%-2.9%. Except epigallocatechin, the other components showed good repeatability under different experimental conditions. Epigallocatechin could meet the requirements in the same instrument and at the same wavelength. The results generally showed no significant difference between QAMS and ESM. The content of 9 components varied between the samples from different manufacturers, while it showed no significant difference between the samples from the same manufacturer. In summary, the UPLC fingerprint combined with QAMS method is feasible and accurate for determining the content of the nine components, which can be used for rapid quality evaluation of Xinnaojian preparations.

[Quality evaluation of Ginseng Radix et Rhizoma based on UPLC characteristic chromatogram and quantitative analysis of multi-components by single marker (QAMS)].

Based on UPLC characteristic chromatogram and quantitative analysis of multi-components by single marker(QAMS), the content of seven types of ginsenosides in Ginseng Radix et Rhizoma was simultaneously determined, and the quality of Ginseng Radix et Rhizoma was evaluated by the principal component analysis(PCA). The chromatographic separation was performed on the Acquity UPLC BEH C_(18) column(2.1 mm×100 mm, 1.7 µm) with the mobile phase of acetonitrile-water for gradient elution at the flow rate of 0.3 mL·min~(-1), the column temperature of 30 ℃, the detection wavelength of 203 nm, and the injection volume of 2 µL. The UPLC chromatogram was established with 19 batches of Ginseng Radix et Rhizoma samples from three producing areas by Similarity Evaluation System for Chromatographic Fingerprint of Traditional Chinese Medicine(version 2012). Thirteen characteristic peaks were determined and seven components were identified. SPSS 26.0 was used to conduct PCA on the characteristic peak areas. With the peak of ginsenoside Rb_1 as reference peak S, ginsenoside Rb_1 showed good durability of relative correction factor as compared with other ginsenosides. The QAMS method for the determination of seven ginsenosides in Ginseng Radix et Rhizoma was established. There was no significant difference in results between the QAMS method and the external standard method. As revealed by the results of PCA and the determination of the total content of seven ginsenosides, the four batches of Ginseng Radix et Rhizoma numbered S19, S18, S1, and S2 were of superior quality. The characteristic chromatogram and QAMS method for the determination of seven ginsenosides in this study were convenient and accurate, which greatly shortened the analysis time and improved the analysis efficiency. The findings of this study are expected to provide a basis for the overall quality evaluation of Ginseng Radix et Rhizoma.

[Simultaneous determination of glucosinolates and flavonoids in leaves of Moringa oleifera by quantitative analysis of multi-components by single-marker (QAMS)].

To establish a method for simultaneously determining the content of four glucosinolates and five flavonoids in leaves of Moringa oleifera via quantitative analysis of multi-components by single-marker(QAMS) and verify the feasibility and applicability of the established method. The glucosinolates and flavonoids were analyzed via Waters Acquity UPLC HSS T_3 column(2.1 mm × 100 mm, 1.8 µm). The gradient elution was carried out with the mobile phase composed of 0.1% formic acid-acetonitrile and 0.3% formic acid at the flow rate of 0.4 mL·min~(-1) and the column temperature of 40 ℃. The wavelengths for the detection of glucosinolates and flavonoids were 225 nm and 260 nm, respectively. With 4-O-(α-L-rhamnoyloxy)-benzyl glucosinolate and vecenin-2 as internal reference substances, the relative correction factors of four glucosinolates and five flavonoids were respectively calculated for determining the content of the 9 ingredients in leaves of M. oleifera. To verify the accuracy and feasibility of QAMS, we used internal standard method(ISM) and external standard method(ESM) to determine the content of glucosinolates and flavonoids, respectively. The t-test results showed that there was no significant difference in the content of glucosinolates obtained by ISM and QAMS methods or in the content of flavonoids obtained by ESM and QAMS methods. The content of glucosinolates and flavonoids varied among M. oleifera of different varieties and from different producing areas. The total glucosinolates and total flavonoids had the highest content in the Indian variety while the lowest content in the variety ■Honghe No. 1'. The established QAMS method is rapid, simple and accurate and can be used for simultaneous determination of glucosinolates and flavonoids in the leaves of M. oleifera. This study provides experimental data for the quality control and utilization of M. oleifera leaves.

In silico production of relative correction factor for the quantitative analysis of multi-components by single marker method.

INTRODUCTION: Traditional methods to derive experimentally-generated relative correction factors (RCFs) for the quantitative analysis of herbal multi-components by single marker (QAMS) method require reference standards and multiple validations with different instruments and columns, which hampers high throughput implementation. OBJECTIVES: To effectively reduce the application amounts of raw material and provide higher and more stable accuracy, this study aimed to develop a method to computationally generate RCFs of herbal components. MATERIALS AND METHODS: This strategy included the published data collection, calibration curves screening, computer algorithm-based RCFs generation and accuracy validation. RESULTS: Using the in silico approach, we have successfully produced 133 RCFs for the multi-component quantitative analysis of 63 widely used herbs. CONCLUSION: Compared with conventional RCFs, this in silico method would be a low cost and highly efficient way to produce practical RCFs for the QAMS method.

Establishment and validation of the quantitative analysis of multi-components by single marker for the quality control of Qishen Yiqi dripping pills by high-performance liquid chromatography with charged aerosol detection.

INTRODUCTION: Charged aerosol detection (CAD) has the merits of high sensitivity, high universality and response uniformity. The strategy that combines the quantitative analysis of multi-components by single marker (QAMS) with CAD has certain advantages for the quantification of multi-components. However, relevant research was limited. OBJECTIVES: To comprehensively investigate the crucial factors that affect the performance of the HPLC-CAD-QAMS approach and validate the credibility and feasibility of the method. METHODOLOGY: Multiple components of Qishen Yiqi dripping pills (QSYQ) were assayed using the high-performance liquid chromatography (HPLC)-CAD-QAMS approach. Some factors that affect the sensitivity and accuracy of the approach were sufficiently studied. After the method verification, principal component analysis (PCA) was applied to evaluate the quality consistency of three types of samples: normal samples, expired samples and negative samples. RESULTS: A HPLC-CAD-QAMS method was successfully developed for the multi-component determination of QSYQ. First, chromatographic conditions were optimised by a definitive screening design, and the optimised ranges of operating parameters were obtained with a Monte Carlo simulation method. Next, a new method to select the internal reference standards was successfully introduced based on the heatmap of Pearson correlation coefficients of the response factors. Then, the multi-point method was selected to calculate the relative correction factors, and a robustness test was conducted with Plackett-Burman design. Finally, the PCA was proved to be effective for the quality consistency evaluation of different samples. CONCLUSION: The developed HPLC-CAD-QAMS method can be a reliable and superior means for the multi-component quantitative analysis of QSYQ.

[Research and verification of quality evaluation method of Epimedii Folium based on quantitative analysis of multi-components by single marker].

The quality control of Epimedii Folium, composed of diverse constituents, is single at present. In view of this, an eva-luation method of 13 chemical constituents based on quantitative analysis of multi-components by single marker(QAMS) was established to further explore the composition differences of raw products and alcohol extracts in different batches and the influence of alcohol extraction on the composition, so as to provide a reference for improving the quality evaluation and control of Epimedii Folium. The fingerprints of different batches of Epimedii Folium were constructed by ultra-high performance liquid chromatography(UPLC) to evaluate the inter-batch consistency. The changes of the flavonoids in Epimedii Folium during alcohol extraction were analyzed based on determined levels and heat map, and the reasons for the changes were preliminarily discussed. With icariin, the quality control component recorded in the Chinese Pharmacopoeia, as the internal reference, the stability of the relative correction factors of chemical components under different conditions was investigated to obtain the relative correction factors. Then the determination results of QAMS and the external standard method were compared to verify the accuracy of QAMS. The results revealed that all batches of Epimedii Folium met the requirements specified in the Chinese Pharmacopoeia, and the fingerprints of Epimedii Folium from the same place of origin exhibited a high similarity. Raw products and alcohol extracts of Epimedii Folium could be clearly distinguished by prenylated flavonoids, which are potential biomarkers for quality control. Additionally, the glycoside hydrolysis in the alcohol extraction was preliminarily explored. The QAMS method has good accuracy, durability, and repeatability in determining 13 chemical components in Epimedii Folium under different experimental conditions. No significant difference in the results obtained by the two methods was observed. This study can provide a reference for comprehensive, rapid and reasonable quality evaluation of Epimedii Folium.

[Content determination of five flavonoids in Tibetan medicine Rhododendron anthopogonoides by quantitative analysis of multi-components by single marker (QAMS)].

To establish a quantitative analysis of multi-components by single marker(QAMS) method for five flavonoids in Rhododendron anthopogonoides and verify its feasibility and applicability in the medicinal materials of R. anthopogonoides. With hyperoside as the internal reference, relative correction factors(RCF) of rutin, quercetin, quercitrin and kaempferol were established by high-performance liquid chromatography(HPLC) analysis. RCFs were used to calculate the content of each component, system durability and relative retention time. Simultaneously, QAMS and external standard method(ESM) were used to determine the content of five flavonoids in 12 batches of R. anthopogonoides from different origins. The results were statistically analyzed to verify the accuracy and feasibility. The fingerprints and cluster analysis data of R. anthopogonoides analyzed and discussed differences among the batches. According to the results, the RCFs of rutin, quercetin, quercetin and kaempferol in R. anthopogonoides were 1.242 6, 0.990 5, 0.535 0, and 0.781 3, respectively. The RCFs represented a good reproducibility under different experimental conditions. Besides, there was no significant difference between QAMS and ESM. Besides, the fingerprint and cluster analysis data showed the consistency between the classification and with the origin distribution of the herbs. In conclusion, the QAMS method shows a good stability and accuracy in the quality control of R. anthopogonoides.

[Qualitative and quantitative analysis on triterpenoids in Ligustri Lucidi Fructus].

Triterpenoids are one of the most active constituents in Ligustri Lucidi Fructus, but only oleanolic acid has been mostly studied. In recent years, a growing number of studies have shown that other triterpenes from Ligustri Lucidi Fructus also have various biological activities, so it is necessary to build up a detailed profile of the triterpenoids in Ligustri Lucidi Fructus. The chromatographic separation was performed on a C_(18) column(4.6 mm×250 mm, 5 µm) with mobile phase of methanol-acetonitrile-0.2% formic acid for gradient elution. The detection wavelength was set at 210 nm, with a flow rate of 0.5 mL·min~(-1), and the column temperature of 25 ℃. The HPLC fingerprint of triterpenoids in Ligustri Lucidi Fructus was built by testing 21 batches of samples from different sources. The structures of the total 15 common chromatographic peaks were elucidated with UHPLC-ESI-Orbitrap-MS/MS technique and six of them were identified as tormentic acid, pomolic acid, maslinic acid, botulin, oleanolic acid and ursolic acid by comparison to the reference substances. Under the same chromatographic condition, four main triterpenes(podocarboxylic acid, hawthorn acid, oleanolic acid and ursolic acid) were quantified and the results of system adaptability and methodology investigation all met the requirements of content determination. Meanwhile, with oleanolic acid(A) as the internal reference substance, quantitative analysis of multi-components by single marker(QAMS) method was used to analyze the above four components. The relative correction factor of oleanolic acid(B), hawthorn acid(C) and ursolic acid(D) to oleanolic acid was f_(B/A)=1.12, f_(C/A)=1.02 and f_(D/A)=0.88, respectively, and the relative retention values of these three to oleanolic acid was RRV_(B/A)=0.46, RRV_(C/A)=0.70 and RRV_(D/A)=1.03, respectively. The contents determined by two methods were similar. In conclusion, the method built in this paper is proved to be simple, reliable and specific for the simultaneous qualitative and quantitative analysis of the triterpenoids in Ligustri Lucidi Fructus, which can lay foundation for further assays of the triterpenoids in Ligustri Lucidi Fructus and the relative products.

[Quality evaluation of Saposhnikoviae Radix based on QAMS combined with information entropy-response surface method].

This research was used with high performance liquid chromatography(HPLC), combined with information entropy-response surface method(RSM) to investigate the ethanol concentration, extraction time, liquid-to-material ratio. Taking the content of four chromogens as evaluation indexes, the weight coefficients of each index were given, and the comprehensive score was calculated to optimize the extraction process. Then, prim-O-glucosylcimifugin was used as the reference, the relative calibration factors(RCFs) of cimifugin, 4'-O-ß-D-glucosyl-5-O-methylvisamminol and sec-O-glucosylhamaudo to prim-O-glucosylcimifugin were calculated respectively. The contents of four components in Saposhnikoviae Radix were determined by both external standard method(ESM)and quantitative analysis of multi-components by single marker(QAMS) method, and the results were compared. At last, combined with principal component analysis(PCA) and orthogonal partial least squares discriminant analysis(OPLS-DA) to evaluate the quality of the Saposhnikoviae Radix in different production areas. The optimal extraction process parameter of the Saposhnikoviae Radix was as follows: liquid-to-material ratio is 60∶1(mL·g~(-1)), extraction time is 35 min, and ethanol concentration is 70%. The repeatability of the RCFs was perfect, and the results calculated by the QAMS were consistent with the results from the ESM. The stoichiometric results indicate that there are obvious differences in the distribution of Saposhnikoviae Radix in different production areas, and cimifugin and prim-O-glucosylcimifugin are the characteristic compounds that cause this difference. In this study, the optimal extraction process is stable and feasible, and the method of QAMS is accurate and reliable. From the perspective of four chromogens, there are differences in the quality of the Saposhnikoviae Radix in different production areas. Therefore, the established extraction process combined with the method of QAMS can be used to evaluate the quality of Saposhnikoviae Radix and provide a scientific basis for the quality control of Saposhnikoviae Radix.