Optimizing oxygen vacancies through grain boundary engineering to enhance electrocatalytic nitrogen reduction.

Electrocatalytic nitrogen reduction is a challenging process that requires achieving high ammonia yield rate and reasonable faradaic efficiency. To address this issue, this study developed a catalyst by in situ anchoring interfacial intergrown ultrafine MoO2 nanograins on N-doped carbon fibers. By optimizing the thermal treatment conditions, an abundant number of grain boundaries were generated between MoO2 nanograins, which led to an increased fraction of oxygen vacancies. This, in turn, improved the transfer of electrons, resulting in the creation of highly active reactive sites and efficient nitrogen trapping. The resulting optimal catalyst, MoO2/C700, outperformed commercial MoO2 and state-of-the-art N2 reduction catalysts, with NH3 yield and Faradic efficiency of 173.7 µg h-1 mg-1cat and 27.6%, respectively, under - 0.7 V vs. RHE in 1 M KOH electrolyte. In situ X-ray photoelectron spectroscopy characterization and density functional theory calculation validated the electronic structure effect and advantage of N2 adsorption over oxygen vacancy, revealing the dominant interplay of N2 and oxygen vacancy and generating electronic transfer between nitrogen and Mo(IV). The study also unveiled the origin of improved activity by correlating with the interfacial effect, demonstrating the big potential for practical N2 reduction applications as the obtained optimal catalyst exhibited appreciable catalytic stability during 60 h of continuous electrolysis. This work demonstrates the feasibility of enhancing electrocatalytic nitrogen reduction by engineering grain boundaries to promote oxygen vacancies, offering a promising avenue for efficient and sustainable ammonia production.

Highly selective NH3 synthesis from N2 on electron-rich Bi0 in a pressurized electrolyzer.

Electrochemical conversion of N2 into ammonia presents a sustainable pathway to produce hydrogen storage carrier but yet requires further advancement in electrocatalyst design and electrolyzer integration. This technology suffers from low selectivity and yield owing to the extremely strong N≡N bond and the exceptionally low solubility of N2 in aqueous systems. A high NH3 synthesis performance is restricted by the high activation energy of N≡N bond and the supply insufficiency of N2 to active sites. This paper describes the introduction of electron-rich Bi0 sites into Ag catalysts with a high-pressure electrolyzer that enables a dramatically enhanced Faradaic efficiency of 44.0% and yield of 28.43 µg cm-2 h-1 at 4.0 MPa. Combined with density functional theory results, in situ attenuated total reflectance surface-enhanced infrared absorption spectroscopy demonstrates that N2 reduction reaction follows an associative mechanism, in which a high coverage of N-N bond and -NH2 intermediates suggest electron-rich Bi0 boosts sound activation of N2 molecules and low hydrogenation barrier. The proposed strategy of engineering electrochemical catalysts and devices provides powerful guidelines for achieving industrial-level green ammonia production.

Lewis acid-dominated aqueous electrolyte acting as co-catalyst and overcoming N2 activation issues on catalyst surface.

The growing demands for ammonia in agriculture and transportation fuel stimulate researchers to develop sustainable electrochemical methods to synthesize ammonia ambiently, to get past the energy-intensive Haber-Bosch process. However, the conventionally used aqueous electrolytes limit N2 solubility, leading to insufficient reactant molecules in the vicinity of the catalyst during electrochemical nitrogen reduction reaction (NRR). This hampers the yield and production rate of ammonia, irrespective of how efficient the catalyst is. Herein, we introduce an aqueous electrolyte (NaBF4), which not only acts as an N2-carrier in the medium but also works as a full-fledged "co-catalyst" along with our active material MnN4 to deliver a high yield of NH3 (328.59 µg h-1 mgcat-1) at 0.0 V versus reversible hydrogen electrode. BF3-induced charge polarization shifts the metal d-band center of the MnN4 unit close to the Fermi level, inviting N2 adsorption facilely. The Lewis acidity of the free BF3 molecules further propagates their importance in polarizing the N≡N bond of the adsorbed N2 and its first protonation. This push-pull kind of electronic interaction has been confirmed from the change in d-band center values of the MnN4 site as well as charge density distribution over our active model units, which turned out to be effective enough to lower the energy barrier of the potential determining steps of NRR. Consequently, a high production rate of NH3 (2.45 × 10-9 mol s-1 cm-2) was achieved, approaching the industrial scale where the source of NH3 was thoroughly studied and confirmed to be chiefly from the electrochemical reduction of the purged N2 gas.

Cu-Bi Bimetallic Sulfides Loaded on Two-Dimensional Ti3C2Tx MXene for Efficient Electrocatalytic Nitrogen Reduction under Ambient Conditions.

In this paper, Ti3C2Tx MXene/Cu-Bi bimetallic sulfide (Ti3C2Tx/BiCuS2.5) composites were prepared by a simple in situ deposition method for electrocatalytic nitrogen reduction reaction (eNRR). Compared to Ti3C2Tx/Bi2S3 and Ti3C2Tx/CuS, the eNRR performance of Ti3C2Tx/BiCuS2.5 is significantly improved. The results show that Ti3C2Tx/BiCuS2.5 exhibits a NH3 yield of 62.57 µg h-1 mg-1cat. in 0.1 M Na2SO4 at -0.6 V vs reversible hydrogen electrode, and the Faradaic efficiency (FE) reaches 67.69%, which is better than that of Ti3C2Tx/CuS (NH3 yield: 52.26 µg h-1 mg-1cat., FE: 34.15%) and Ti3C2Tx/Bi2S3 (NH3 yield: 54.04 µg h-1 mg-1cat., FE: 37.38%). According to density functional theory calculations, the eNRR at the Ti3C2Tx/BiCuS2.5 surface is the alternating pathway. The 1H NMR experiment of 15N proves that the N of NH3 generated in the experiment originates from N2 passed during the experiment.

Multivalent Sulfur Vacancy-Rich NiCo2S4@MnO2 Urchin-Like Heterostructures for Ambient Electrochemical N2 Reduction to NH3.

Innovative advances in the exploitation of effective electrocatalytic materials for the reduction of nitrogen (N2) to ammonia (NH3) are highly required for the sustainable production of fertilizers and zero-carbon emission fuel. In order to achieve zero-carbon footprints and renewable NH3 production, electrochemical N2 reduction reaction (NRR) provides a favorable energy-saving alternative but it requires more active, efficient, and selective catalysts. In current work, sulfur vacancy (Sv)-rich NiCo2S4@MnO2 heterostructures are efficaciously fabricated via a facile hydrothermal approach followed by heat treatment. The urchin-like Sv-NiCo2S4@MnO2 heterostructures serve as cathodes, which demonstrate an optimal NH3 yield of 57.31 µg h-1 mgcat -1 and Faradaic efficiency of 20.55% at -0.2 V versus reversible hydrogen electrode (RHE) in basic electrolyte owing to the synergistic interactions between Sv-NiCo2S4 and MnO2. Density functional theory (DFT) simulation further verifies that Co-sites of urchin-like Sv-NiCo2S4@MnO2 heterostructures are beneficial to lowering the energy threshold for N2 adsorption and successive protonation. Distinctive micro/nano-architectures exhibit high NRR electrocatalytic activities that might motivate researchers to explore and concentrate on the development of heterostructures for ambient electrocatalytic NH3 generation.

Bridging Together Theoretical and Experimental Perspectives in Single-Atom Alloys for Electrochemical Ammonia Production.

Ammonia is an essential commodity in the food and chemical industry. Despite the energy-intensive nature, the Haber-Bosch process is the only player in ammonia production at large scales. Developing other strategies is highly desirable, as sustainable and decentralized ammonia production is crucial. Electrochemical ammonia production by directly reducing nitrogen and nitrogen-based moieties powered by renewable energy sources holds great potential. However, low ammonia production and selectivity rates hamper its utilization as a large-scale ammonia production process. Creating effective and selective catalysts for the electrochemical generation of ammonia is critical for long-term nitrogen fixation. Single-atom alloys (SAAs) have become a new class of materials with distinctive features that may be able to solve some of the problems with conventional heterogeneous catalysts. The design and optimization of SAAs for electrochemical ammonia generation have recently been significantly advanced. This comprehensive review discusses these advancements from theoretical and experimental research perspectives, offering a fundamental understanding of the development of SAAs for ammonia production.

Tuning Main Group Element-based Metal-Organic Framework to Boost Electrocatalytic Nitrogen Reduction Under Ambient Conditions.

Main group element-based materials are emerging catalysts for ammonia (NH3 ) production via a sustainable electrochemical nitrogen reduction reaction (N2 RR) pathway under ambient conditions. However, their N2 RR performances are less explored due to the limited active behavior and unclear mechanism. Here, an aluminum-based defective metal-organic framework (MOF), aluminum-fumarate (Al-Fum), is investigated. As a proof of concept, the pristine Al-Fum MOF is synthesized by the solvothermal reaction process, and the defect engineering method namely solvent-assisted linker exchange, is applied to create the defective Al sites. The defective Al sites play an important role in ensuring the N2 RR activity for defective Al-Fum. It is found that only the defective Al-Fum enables stable and effective electrochemical N2 RR, in terms of the highest production rate of 53.9 µg(NH3 ) h-1 mgcat -1 (in 0.4 m K2 SO4 ) and the Faradaic efficiency of 73.8% (in 0.1 m K2 SO4 ) at -0.15 V vs reversible hydrogen electrode) under ambient conditions. Density functional theory calculations confirm that the N2 activation can be achieved on the defective Al sites. Such sites also allow the subsequent protonation process via the alternating associative mechanism. This defect characteristic gives the main group Al-based MOFs the ability to serve as promising electrocatalysts for N2 RR and other attractive applications.

Revealing the Adsorption Behavior of Nitrogen Reduction Reaction on Strained Ti2 CO2 by a Spin-Polarized d-band Center Model.

Electrocatalytic reduction of dinitrogen to ammonia has attracted significant research interest. Herein, it reports the boosting performance of electrocatalytic nitrogen reduction on Ti2 CO2 MXene with an oxygen vacancy through biaxial tensile strain engineering. Specifically, tensile strain modified electronic structures and formation energy of oxygen vacancy are evaluated. The exposed Ti atoms with additional electron states near the Fermi level serve as active site for intermediate adsorption, leading to superior catalytic performance (Ulimit = -0.44 V) under 2.5% biaxial tensile strain through a distal mechanism. However, the two sides of the "Sabatier optimum" in volcano plot are not limited by two different electronic steps, but are induced by the diverse adsorption behaviors of intermediates. Crucially, the "Sabatier optimum" results from the different response speeds of the adsorption energy for *N2 and *NNH to strains. Moreover, the authors observe conventional d-band adsorption for *N2 and *NNH, non-linear adsorption for *NNH2 , and abnormal d-band adsorption for *N, *NH, *NH2 , and *NH3 , which can be explained by the competition between attractive orbital hybridization and repulsive orbital orthogonalization with the spin-polarized d-band model, which further clarifies the contributions of 3σ → dz2 and dxz /dyz → 2π* to the overall population of bonding and anti-bonding states.

A Novel Bubble-based Microreactor for Enhanced Mass Transfer Dynamics toward Efficient Electrocatalytic Nitrogen Reduction.

Electrocatalytic nitrogen reduction reaction (eNRR) is a promising method for sustainable ammonia production. Although the majority of studies on the eNRR are devoted to developing efficient electrocatalysts, it is critical to study the influence of mass transfer because of the poor N2 transfer efficiency. Herein, a novel bubble-based microreactor (BBMR) is proposed that efficiently promotes the mass transfer behavior during the eNRR using microfluidic strategies. The BBMR possesses abundant triphasic interfaces and provides spatial confinement and accurate potential control, ensuring rapid mass transfer dynamics and improved eNRR performance, as confirmed by experimental and simulation studies. The ammonia yield of the reaction over Ag nanoparticles can be enhanced to 31.35 µg h-1 mgcat. -1, which is twice that of the H-cell. Excellent improvements are also achieved using Ru/C and Fe/g-CN catalysts, with 5.0 and 8.5 times increase in ammonia yield, respectively. This work further demonstrates the significant effect of mass transfer on the eNRR performance and provides an effective strategy for process enhancement through electrode design.

Fe─S Bond-Mediated Efficient Electron Transfer in Quantum Dots/Metal-Organic Frameworks for Boosting Photoelectrocatalytic Nitrogen Fixation.

Effective electron supply to produce ammonia in photoelectrochemical nitrogen reduction reaction (PEC NRR) remains challenging due to the sluggish multiple proton-coupled electron transfer and unfavorable carrier recombination. Herein, InP quantum dots decorated with sulfur ligands (InP QDs-S2-) bound to MIL-100(Fe) as a benchmark catalyst for PEC NRR is reported. It is found that MIL-100(Fe) can combined with InP QDs-S2- via Fe─S bonds as bridge to facilitate the electron transfer by experimental results. The formation of Fe─S bonds can facilitate electron transfer from inorganic S2- ligands of InP QDs to the Fe metal sites of MIL-100(Fe) within 52 ps, ensuring a more efficient electron transfer and electron-hole separation confirmed by the time-resolved spectroscopy. More importantly, the process of photo-induced carrier transfer can be traced by in situ attenuated total reflection surface-enhanced infrared tests, certifying that the effective electron transfer can promote N≡N dissociation and N2 hydrogenation. As a result, InP QDs-S2-/MIL-100(Fe) exhibits prominent performance with an outstanding NH3 yield of 0.58 µmol cm-2 h-1 (3.09 times higher than that of MIL-100(Fe)). This work reveals an important ultrafast dynamic mechanism for PEC NRR in QDs modified metal-organic frameworks, providing a new guideline for the rational design of efficient MOFs photocathodes.

Incorporating Zinc Metal Sites in Aluminum-Coordinated Porphyrin Metal-Organic Frameworks for Enhanced Photocatalytic Nitrogen Reduction to Ammonia.

Rationally designing photocatalysts is crucial for the solar-driven nitrogen reduction reaction (NRR) due to the stable N≡N triple bond. Metal-organic frameworks (MOFs) are considered promising candidates but suffer from insufficient active sites and inferior charge transport. Herein, it is demonstrated that incorporating 3d metal ions, such as zinc (Zn) or iron (Fe) ions, into Al-coordinated porphyrin MOFs (Al-PMOFs) enables the enhanced ammonia yield of 88.7 and 65.0 µg gcat -1 h-1, 2.5- and 1.8-fold increase compared to the pristine Al-PMOF (35.4 µg gcat -1 h-1), respectively. The origin of ammonia (NH3) is verified via isotopic labeling experiments. Incorporating Zn or Fe into Al-PMOF generates active sites in Al-PMOF, that is, Zn-N4 or Fe-N4 sites, which not only facilitates the adsorption and activation of N2 molecules but suppresses the charge recombination. Photophysical and theoretical studies further reveal the upshift of the lowest unoccupied molecular orbital (LUMO) level to a more energetic position upon inserting 3d metal ions (with a more significant shift in Zn than Fe). The promoted nitrogen activation, suppressed charge recombination, and more negative LUMO levels in Al-PMOF(3d metal) contribute to a higher photocatalytic activity than pristine Al-PMOF. This work provides a promising strategy for designing photocatalysts for efficient solar-to-chemical conversion.

Effect of Facet on Local Electron Density of Oxygen Vacancy in Catalysts for Nitrogen Electro-Reduction.

Oxygen-vacancy (Ov) engineering is an effective strategy to manipulate the electronic configuration of catalysts for electrochemical nitrogen reduction reaction (eNRR). The influence of the stable facet on the electronic configuration of Ov is widely studied, however, the effect of the reactive facet on the local electron density of Ov is unveiled. In this work, an eNRR electrode R(111)-TiO2/HGO is provided with a high proportion exposed reactive facet (111) of rutile-TiO2 (denoted as R(111)-TiO2) nanocrystals with Ov anchored in hierarchically porous graphite oxide (HGO) nanofilms. The R(111)-TiO2/HGO exhibits excellent eNRR performance with an NH3 yield rate of 20.68 µg h-1 cm-2, which is ≈20 times the control electrode with the most stable facet (110) exposed (R(110)-TiO2/HGO). The experimental data and theoretical simulations reveal that the crystal facet (111) has a positive effect on regulating the local electron density around the oxygen vacancy and the two adjacent Ti-sites, promoting the π-back-donation, minimizing the eNRR barrier, and transforming the rate determination step to *NNH→*NNHH. This work illuminates the effect of crystal facet on the performance of eNRR, and offers a novel strategy to design efficient eNRR catalysts.

Synthesis and Electrocatalytic Applications of Layer-Structured Metal Chalcogenides Composites.

Featured with the attractive properties such as large surface area, unique atomic layer thickness, excellent electronic conductivity, and superior catalytic activity, layered metal chalcogenides (LMCs) have received considerable research attention in electrocatalytic applications. In this review, the approaches developed to synthesize LMCs-based electrocatalysts are summarized. Recent progress in LMCs-based composites for electrochemical energy conversion applications including oxygen reduction reaction, carbon dioxide reduction reaction, oxygen evolution reaction, hydrogen evolution reaction, overall water splitting, and nitrogen reduction reaction is reviewed, and the potential opportunities and practical obstacles for the development of LMCs-based composites as high-performing active substances for electrocatalytic applications are also discussed. This review may provide an inspiring guidance for developing high-performance LMCs for electrochemical energy conversion applications.

Coordination Structure Modulation in Group-VIB Metal Doped Ag3PO4 Augments Active Site Density for Electrocatalytic Conversion of N2 to NH3.

Doping is considered a promising material engineering strategy in electrochemical nitrogen reduction reaction (NRR), provided the role of the active site is rightly identified. This work concerns the doping of group VIB metal in Ag3PO4 to enhance the active site density, accompanied by d-p orbital mixing at the active site/N2 interface. Doping induces compressive strain in the Ag3PO4 lattice and inherently accompanies vacancy generation, the latter is quantified with positron annihilation lifetime studies (PALS). This eventually alters the metal d-electronic states relative to Fermi level and manipulate the active sites for NRR resulting into side-on N2 adsorption at the interface. The charge density deployment reveals Mo as the most efficient dopant, attaining a minimum NRR overpotential, as confirmed by the detailed kinetic study with the rotating ring disk electrode (RRDE) technique. In fact, the Pt ring of RRDE fails to detect N2H4, which is formed as a stable intermediate on the electrode surface, as identified from in-situ attenuated total reflectance-infrared (ATR-IR) spectroscopy. This advocates the complete conversion of N2 to NH3 on Mo/Ag3PO4-10 and the so-formed oxygen vacancies formed during doping act as proton scavengers suppressing hydrogen evolution reaction resulting into a Faradaic efficiency of 54.8% for NRR.

Insight into Fluoride Additives to Enhance Ammonia Production from Lithium-Mediated Electrochemical Nitrogen Reduction Reaction.

Demands for green ammonia production increase due to its application as a proton carrier, and recent achievements in electrochemical Li-mediated nitrogen reduction reactions (Li-NRRs) show promising reliability. Here, it is demonstrated that F-containing additives in the electrolyte improve ammonia production by modulating the solid electrolyte interphase (SEI). It is suggested that the anionic additives with low lowest unoccupied molecular orbital levels enhance efficiency by contributing to the formation of a conductive SEI incorporated with LiF. Specifically, as little as 0.3 wt.% of BF4 - additive to the electrolyte, the Faradaic efficiency (FE) for ammonia production is enhanced by over 15% compared to an additive-free electrolyte, achieving a high yield of 161 ± 3 nmol s-1 cm-2. The BF4 - additive exhibits advantages, with decreased overpotential and improved FE, compared to its use as the bulk electrolyte. The observation of the Li3N upper layer implies that active Li-NRR catalytic cycles are occurring on the outermost SEI, and density functional theory simulations propose that an SEI incorporated with LiF facilitates energy profiles for the protonation by adjusting the binding energies of the intermediates compared to bare copper. This study unlocks the potential of additives and offers insights into the SEIs for efficient Li-NRRs.

Boosting Electrocatalytic N2 Reduction to NH3 by Enhancing N2 Activation via Interaction between Au Nanoparticles and MIL-101(Fe) in Neutral Electrolytes.

Electrocatalytic nitrogen reduction reaction (NRR) has attracted much attention as a sustainable ammonia production technology, but it needs further exploration due to its slow kinetics and the existence of competitive side reactions. In this research, xAu/MIL-101(Fe) catalysts were obtained by loading gold nanoparticles (Au NPs) onto MIL-101(Fe) using a one-step reduction strategy. Herein, MIL-101(Fe), with high specific surface area and strong N2 adsorption capacity, is used as a support to disperse Au NPs to increase the electrochemical active surface area. Au NPs, with a high NRR activity, is introduced as the active site to promote charge transfer and intermediate formation rates. More importantly, the strong interaction between Au NPs and MIL-101(Fe) enhances the electron transfer between Au NPs and MIL-101(Fe), thereby enhancing the activation of N2 and achieving efficient NRR. Among the prepared catalysts, 15 %Au/MIL-101(Fe) has the highest NH3 yield of 46.37 µg h-1 mg-1 cat and a Faraday efficiency of 39.38 % at -0.4 V (vs. RHE). In-situ FTIR reveals that the NRR mechanism of 15 %Au/MIL-101(Fe) follows the binding alternating pathway and also indicates that the interaction between Au NPs and MIL-101(Fe) strengthens the activation of the N≡N bond in the rate-limiting process, thereby accelerating the NRR process.

Recent Developments of Dual Single-Atom Catalysts for Nitrogen Reduction Reaction.

Ammonia is vital for fertilizer production, hydrogen storage, and alternative fuels. The conventional Haber-Bosch process for ammonia production is energy-intensive and environmentally harmful. Designing environmentally friendly and low-energy consumption strategies for electrocatalytic N2 reduction reaction (ENRR) in mild conditions is meaningful. Single-atom catalysts (SACs) have been studied extensively for NRR due to their high atomic utilization and unique electronic structure but are limited by their poor faradic efficiency and low ammonia formation yield. Dual single-atom catalysts (DSACs) have recently emerged as a promising solution for the effective activation of molecular N2 , providing diverse active sites and synergistic interactions between adjacent atoms. In this review, we summarize the latest advances in metal DSACs for electrochemical ENRR based on both theoretical calculations and experimental studies, including aspects such as their variety, coordination, support, N2 adsorption and activity mechanisms, the characterization of NRR and electrochemical cell Configuration. We also address challenges and prospects in this rapidly evolving field, providing a comprehensive overview of DSACs for ENRR.

Electrocatalytic Dinitrogen Reduction to Ammonia Using Easily Reducible N-Fused Cobalt Porphyrins.

Single-site molecular electrocatalysts, especially those that perform catalytic conversion of N2 to NH3 under mild conditions, are highly desirable to derive fundamental structure-activity relations and as potential alternatives to the current energy-consuming Haber-Bosch ammonia production process. Combining theoretical calculations with experimental evidence, it has been shown that easily reducible cobalt porphyrins catalyze the six-electron, six-proton reduction of dinitrogen to NH3 at neutral pH and under ambient conditions. Two easily reducible N-fused cobalt porphyrins - CoNHF and CoNHF(Br)2 - reveal NRR activity with Faradic efficiencies between 6-7.5 % with ammonia yield rates of 300-340 µmol g-1 h-1. Contrary to this, much harder-to-reduce N-fused porphyrins - CoNHF(Ph)2 and CoNHF(PE)2 - reveal no NRR activity. The present study highlights the significance of tuning the redox and structural properties of single-site NRR electrocatalysts for improved NRR activity under mild conditions.

Theoretical Insight into the Special Synergy of Bimetallic Site in Co/MoC Catalyst to Promote N2 -to-NH3 Conversion.

The catalytic mechanisms of nitrogen reduction reaction (NRR) on the pristine and Co/α-MoC(001) surfaces were explored by density functional theory calculations. The results show that the preferred pathway is that a direct N≡N cleavage occurs first, followed by continuous hydrogenations. The production of second NH3 molecule is identified as the rate-limiting step on both systems with kinetic barriers of 1.5 and 2.0 eV, respectively, indicating that N2 -to-NH3 transformation on bimetallic surface is more likely to occur. The two components of the bimetallic center play different roles during NRR process, in which Co atom does not directly participate in the binding of intermediates, but primarily serves as a reservoir of H atoms. This special synergy makes Co/α-MoC(001) have superior activity for ammonia synthesis. The introduction of Co not only facilitates N2 dissociation, but also accelerates the migration of H atom due to the antibonding characteristic of Co-H bond. This study offers a facile strategy for the rational design and development of efficient catalysts for ammonia synthesis and other reactions involving the hydrogenation processes.

Coordination Engineering of Heteronuclear Fe-Mo Dual-Atom Catalyst for Promoted Electrocatalytic Nitrogen Fixation: A DFT Study.

Developing efficient nanostructured electrocatalysts for N2 reduction to NH3 under mild conditions remains a major challenge. The Fe-Mo cofactor serves as the archetypal active site in nitrogenase. Inspired by nitrogenase, we designed a series of heteronuclear dual-atom catalysts (DACs) labeled as FeMoN6-a Xa (a=1, 2, 3; X=B, C, O, S) anchored on the pore of g-C3 N4 to probe the impact of coordination on FeMo-catalyzed nitrogen fixation. The stability, reaction paths, activity, and selectivity of 12 different FeMoN6-a Xa DACs have been systematically studied using density functional theory. Of these, four DACs (FeMoN5 B1 , FeMoN5 O1 , FeMoN4 O2 , and FeMoN3 C3 ) displayed promising nitrogen reduction reaction (NRR) performance. Notably, FeMoN5 O1 stands out with an ultralow limiting potential of -0.11 V and high selectivity. Analysis of the density of states and charge/spin changes shows FeMoN5 O1 's high activity arises from optimal N2 binding on Fe initially and synergy of the FeMo dimer enabling protonation in NRR. This work contributes to the advancement of rational design for efficient NRR catalysts by regulating atomic coordination environments.