Pharmacokinetic Bioequivalence between Generic and Originator Orally Inhaled Drug Products: Validity of Administration of Doses above the Approved Single Maximum Dose.

Pharmacokinetic bioequivalence of orally inhaled drug products is a critical component of the US FDA's "weight of evidence" approach, and it can serve as the sole indicator of safety and effectiveness of follow-on inhalation products approved in Europe and some other geographic areas. The approved labels of the orally inhaled drug products recommend the maximum number of actuations that can be administered in a single dose on one occasion. This single maximum dose may consist of one or more inhalations depending upon the product. Bioequivalence studies for the inhalation drug product registrations in the US and EU have employed single and multiple actuation doses, in some cases over and above the approved single maximum labeled doses, thus, inconsistent with the approved labeling of the reference products. Pharmacokinetics of inhaled drug products after single and multiple doses may be different, with implications for bioequivalence determined at single and multiple doses. Scientific literature indicates that the relative bioavailability of the Test and Reference products may differ between administrations of doses in one and multiple inhalations. Multiple doses not only alter the pharmacokinetics but also may reduce the sensitivity of the bioassay to actual differences between the Test and Reference product performances. Ability of the pharmacokinetic bioassay to accurately determine the extent of difference between two products may also be substantially reduced at high doses. Therefore, in our opinion, pharmacokinetic bioequivalence to support regulatory approvals of inhalation products at doses above the recommended single maximum dose should be avoided. Furthermore, the bioequivalence of products (if any) established at doses exceeding the approved single maximum doses should be revisited to determine if the products maintain bioequivalence when evaluated at the clinically relevant single maximum doses.

Discovery of a potent, orally available furopyridine derivative as a novel selective bromodomain and extra-terminal domain (BET)-first bromodomain (BD1) inhibitor.

We explored novel immunosuppressive agents with immune tolerance using a phenotypic drug discovery strategy, focusing on costimulatory molecules in T cells, and obtained triazolothienodiazepine derivatives. Their mechanism of action is to inhibit the bromodomain and extra-terminal domain (BET) family, as we have previously reported. Selective inhibition of the first bromodomain (BD1) of the BET family is expected to exert antitumor and immunosuppressive effects, similar to BET inhibitors. This study identified furopyridine derivatives 7 and 8 with high BD1 inhibitory activity and high selectivity over BD2. Compound 7 was found to be orally bioavailable and exhibited anti-inflammatory activity in a lipopolysaccharide-induced model.

Recombinant lactococcal-based oral vaccine for protection against Streptococcus agalactiae infections in tilapia (Oreochromis niloticus).

Streptococcosis outbreaks caused by Streptococcus agalactiae infection in tilapia aquaculture have been consistently reported and associated with high mortality and morbidity leading to significant economic losses. Existing vaccine candidates against Streptococcus spp. are designed for intraperitoneal injections that are not practical and labor-intensive which have prompted farmers to protect aquatic animals with antibiotics, thus encouraging the emergence of multidrug resistant bacteria. In this study, a live recombinant L. lactis vaccine expressing a 1403 bp surface immunogenic protein (SIP) and a 1100 bp truncated SIP (tSIP) gene was developed and evaluated against S. agalactiae infection in tilapia. Both SIP and tSIP sequences were cloned and transformed into L. lactis. The recombinant L.lactis vaccine was orally administered to juvenile tilapia for a month. Detection of SIP-specific serum IgM in vaccinated groups compared to control groups indicated that recombinant proteins expressed from L. lactis could elicit immunogenic reactions in tilapia. Fish immunized with the tSIP vaccine also showed the highest level of protection compared to other test groups, and the mortality rate was significantly reduced compared to both control groups. The relative percentage of survival (RPS) against S. agalactiae for both SIP and tSIP-vaccinated groups was 50 % and 89 %, respectively, at 14 days post-challenge. Significant up-regulation of IgM, IL-1ß, IL-10, TNF-α and IFN-γ were observed at day 34 between the vaccinated and control groups. These results indicated that the recombinant lactococcal tSIP vaccine can elicit both cell-mediated and humoral responses and is recommended as a potential oral vaccine against S. agalactiae infection. Future work will include further in vivo challenge assessments of this vaccine candidate fused with adjuvants to boost immunogenicity levels in tilapia.

Structure-activity relationships of middle-size cyclic peptides, KRAS inhibitors derived from an mRNA display.

Cyclic peptides are attracting attention as therapeutic agents due to their potential for oral absorption and easy access to tough intracellular targets. LUNA18, a clinical KRAS inhibitor, was transformed-without scaffold hopping-from the initial hit by using an mRNA display library that met our criteria for drug-likeness. In drug discovery using mRNA display libraries, hit compounds always possess a site linked to an mRNA tag. Here, we describe our examination of the Structure-Activity Relationship (SAR) using X-ray structures for chemical optimization near the site linked to the mRNA tag, equivalent to the C-terminus. Structural modifications near the C-terminus demonstrated a relatively wide range of tolerance for side chains. Furthermore, we show that a single atom modification is enough to change the pharmacokinetic (PK) profile. Since there are four positions where side chain modification is permissible in terms of activity, it is possible to flexibly adjust the pharmacokinetic profile by structurally optimizing the side chain. The side chain transformation findings demonstrated here may be generally applicable to hits obtained from mRNA display libraries.

A prediction model based on artificial intelligence techniques for disintegration time and hardness of fast disintegrating tablets in pre-formulation tests.

BACKGROUND: The pharmaceutical industry is continually striving to innovate drug development and formulation processes. Orally disintegrating tablets (ODTs) have gained popularity due to their quick release and patient-friendly characteristics. The choice of excipients in tablet formulations plays a critical role in ensuring product quality, highlighting its importance in tablet creation. The traditional trial-and-error approach to this process is both expensive and time-intensive. To tackle these obstacles, we introduce a fresh approach leveraging machine learning and deep learning methods to automate and enhance pre-formulation drug design. METHODS: We collected a comprehensive dataset of 1983 formulations, including excipient names, quantities, active ingredient details, and various physicochemical attributes. Our study focused on predicting two critical control test parameters: tablet disintegration time and hardness. We compared a range of models like deep learning, artificial neural networks, support vector machines, decision trees, multiple linear regression, and random forests. RESULTS: A 12-layer deep neural network, as a form of deep learning, surpassed alternative techniques by achieving 73% accuracy for disintegration time and 99% for tablet hardness. This success underscores its efficacy in predicting complex pharmaceutical factors. Such an approach streamlines the drug formulation process, reducing iterations and material consumption. CONCLUSIONS: Our findings highlight the deep learning potential in pharmaceutical formulations, particularly for tablet hardness prediction. Future work should focus on enlarging the dataset to improve model effectiveness and extend its application in pharmaceutical product development and assessment.

Computer-aided optimization of carbidopa/levodopa orally disintegrating tablets.

OBJECTIVE: This study aimed to optimize the formulation of carbidopa/levodopa orally disintegrating tablets (ODTs) in order to improve their disintegration performance, and facilitate easier medication intake for Parkinson's patients. METHOD: The response surface methodology (RSM) was used to optimize the formulation, with the content of cross-linked polyvinylpyrrolidone (PVPP), microcrystalline cellulose (MCC), and mannitol (MNT) as independent variables, and disintegration time as the response parameter. Python was utilized to model Carr Indices and mixing time to determine the suitable mixing time. Direct compression (DC) was used for the preparation of ODTs. RESULT: The optimization process resulted in the following values for the independent variables: 7.04% PVPP, 22.02% MCC, and 16.21% MNT. By optimizing the mixing time using Python, it was reduced to 14.19 min. The ODTs prepared using the optimized formulation and a mixing time of 14.19 min exhibited disintegration times of 16.74 s in vitro and 17.63 s in vivo. The content uniformity of levodopa and carbidopa was found to be 100.83% and 99.48%, respectively. CONCLUSION: The ODTs optimized using RSM and Python demonstrated excellent disintegration performance, leading to a decrease in the time the drug exists in solid form in the oral cavity. This improvement in disintegration time reduced the difficulty of swallowing for patients and enhanced medication compliance, while still ensuring that ODTs prepared by DC had sufficient mechanical strength to meet storage and transportation requirements.

Development of a novel direct compressible co-processed excipient and its application for formulation of Mirtazapine orally disintegrating tablets.

INTRODUCTION: Orally disintegrating tablets (ODTs) are designed to dissolve in the oral cavity within 3 min, providing a convenient option for patients as they can be taken without water. Direct compression is the most common method used for ODTs formulations. However, the availability of single composite excipients with desirable characteristics such as good compressibility, fast disintegration, and a good mouthfeel suitable for direct compression is limited. OBJECTIVE: This research was proposed to develop a co-processed excipient composed of xylitol, mannitol, and microcrystalline cellulose for the formulation of ODTs. METHODS: A total of 11 formulations of co-processed excipients with different ratios of ingredients were prepared, which were then compressed into ODTs, and their characteristics were thoroughly examined. The primary focus was on evaluating the disintegration time and hardness of the tablets, as these factors are important in ensuring the ODTs meet the desired criteria. The model drug, Mirtazapine was then incorporated into the chosen optimized formulation. RESULTS: The results showed that the formulation comprised of 10% xylitol, 10% mannitol and 80% microcrystalline cellulose demonstrated the fastest disintegration time (1.77 ± 0.119 min) and sufficient hardness (3.521 ± 0.143 kg) compared to the other formulations. Furthermore, the drug was uniformly distributed within the tablets and fully released within 15 min. CONCLUSION: Therefore, the developed co-processed excipients show great potential in enhancing the functionalities of ODTs, offering a promising solution to improve the overall performance and usability of ODTs in various therapeutic applications.

The potential of orally exposed risk factors and constituents aggravating food allergy: Possible mechanism and target cells.

Food allergy is a significant concern for the health of humans worldwide. In addition to dietary exposure of food allergens, genetic and environmental factors also play an important role in the development of food allergy. However, only the tip of the iceberg of risk factors in food allergy has been identified. The importance of food allergy caused by orally exposed risk factors and constituents, including veterinary drugs, pesticides, processed foods/derivatives, nanoparticles, microplastics, pathogens, toxins, food additives, dietary intake of salt/sugar/total fat, vitamin D, and therapeutic drugs, are highlighted and discussed in this review. Moreover, the epithelial barrier hypothesis, which is closely associated with the occurrence of food allergy, is also introduced. Additionally, several orally exposed risk factors and constituents that have been reported to disrupt the epithelial barrier are elucidated. Finally, the possible mechanisms and key immune cells of orally exposed risk factors and constituents in aggravating food allergy are overviewed. Further work should be conducted to define the specific mechanism by which these risk factors and constituents are driving food allergy, which will be of central importance to the targeted therapy of food allergy.

Intestinal Absorption Site-Guided Development and Evaluation of Oral Disintegrating Controlled Release Tablets of Mirabegron.

The aim was to employ site-dependent absorption of mirabegron (MB) as a guide for fabrication of oral disintegrating controlled release tablet (ODCRT) which undergoes instantaneous release of loading fraction followed by delayed release of the rest of MB. The goal was to release MB in a manner consistent with the chronobiology of overactive bladder (OAB) syndrome. In situ rabbit intestinal permeability of MB was adopted to assess absorption sites. MB was subjected to dry co-grinding with citric acid to develop the fast-dissolving fraction in the mouth. Delayed release fraction was formulated by ethanol-assisted co-processing with increasing proportions of Eudragit polymer (S100) as pH responsive polymer. The developed dry mixtures underwent thermal (DSC) and physical (X-ray diffraction) characterization, in addition to in vitro release behavior. Optimized fast dissolving and delayed release formulations were mixed with tablet excipient before compression in ODCRT which was assessed for release profile using continuous pH variation. MB underwent preferential permeation through ileum and colon. Co-grinding with citric acid provided co-amorphous powder with fast dissolution. Co-amorphization of MB with Eudragit S100 (1:5) showed pH-dependent release to release most of the dose at pH 7.4. The developed ODCRT released 43.5% of MB in the buccal environment and retained MB at acidic pH to start release at pH 7.4. The study successfully fabricated ODCRT guided by site-dependent absorption. The ODCRT instantaneously released loading fraction to support the patient after administration with delayed fraction to sustain the effect.

Development and In vivo Evaluation of Atomoxetine Hydrochloride ODMTs in a Nicotine-induced Attention Deficit Hyperactivity Disorder (ADHD) Model in Rats.

The current study aimed to evaluate the efficacy of orally administered rapid mini-tablets containing atomoxetine hydrochloride (ODMT) relative to the conventional capsule formulation of atomoxetine hydrochloride (ATO). To mask the bitter taste of ATO and render it more palatable for pediatric administration in individuals with Attention Deficit Hyperactivity Disorder (ADHD), an inclusion complex of ATO with ß-cyclodextrin (ß-CD) was synthesized. The ODMT and conventional capsule ATO formulations were administered orally to a cohort of ADHD rat pups born to nicotine-exposed dams, facilitating an in vivo efficacy assessment. Behavioral assays, including the open field test, novel object recognition test, and Barnes maze test, were conducted pre- and post-administration of the therapeutics. The outcomes suggested that the ODMT formulation, incorporating ATO-ß-CD inclusion complexes, shows promise as a viable alternative to the capsule form of ATO. Conclusively, the preparation of the ATO-ß-CD complexes and ODMTs leveraged a factorial experimental design, with the animal model being subjected to nicotine-induced hyperactivity to provide a unique evaluative framework for the ODMT formulation under development.

Development of Losartan Orally Disintegrating Tablets by Direct Compression: a Cost-Effective Approach to Improve Paediatric Patient's Compliance.

The development of suitable dosage forms is essential for an effective pharmacological treatment in children. Orally disintegrating tablets (ODTs) are attractive dosage forms that avoid swallowing problems, ensure dosage accuracy and are easy to administer as they disintegrate in the oral cavity. This study aimed to develop ODTs containing losartan potassium (LP) for the treatment of arterial hypertension in children. The ODTs, produced by the cost-effective manufacturing process of direct compression, consisted of a mixture of diluent, superdisintegrant, glidant and lubricant. Five superdisintegrants (croscarmellose sodium, two grades of crospovidone, sodium starch glycolate and pregelatinized starch) were tested (at two concentrations), and combined with three diluents (mannitol, lactose and sorbitol). Thus, thirty formulations were evaluated based on disintegration time, hardness and friability. Two formulations, exhibiting the best results concerning disintegration time (< 30 s), hardness and friability (≤ 1.0%), were selected as the most promising ones for further evaluation. These ODTs presented favourable drug-excipient compatibility, tabletability and flow properties. The in vitro dissolution studies demonstrated 'very rapid' drug release. Preliminary stability studies highlighted the requirement of a protective packaging. All quality properties retained appropriate results after 12 months of storage in airtight containers. In conclusion, the ODTs were successfully developed and characterised, suggesting a potential means to accomplish a final prototype that enables an improvement in childhood arterial hypertension treatment.

[A case of oral chloropicrin poisoning].

Chloropicrin is a commonly used pesticide in agricultural production. The clinical manifestations of oral poisoning patients are complex, and the lesions involve multiple organs. At present, the specific pathogenic mechanism of such poisoning is not clear, and the treatment experience is insufficient, so there are certain difficulties in clinical diagnosis, treatment and treatment. In this paper, the data of a patient with oral chloropicrin poisoning treated in Yidu Central Hospital of Weifang City in April 2023 were summarized. The patient was admitted to our hospital for treatment in time, and his condition improved after Hemopurification, methylene blue reduction, organ support, infection prevention as well as other symptomatic support. Oral chlorophenol can cause lung damage, skin and mucous membrane damage, and may have certain effects on the nervous system and kidney. Early intervention, especially blood purification, is effective.

Safety and Pharmacokinetics of Intravenous and Oral Fosmanogepix, a First-in-Class Antifungal Agent, in Healthy Volunteers.

Fosmanogepix (FMGX, APX001), a first-in-class, intravenous (i.v.) and oral (p.o.) antifungal prodrug candidate is currently in clinical development for the treatment of invasive fungal infections. Manogepix (MGX, APX001A), the active moiety of FMGX, interferes with cell wall synthesis by targeting fungal glycosylphosphatidylinositol-anchored cell wall transfer protein 1, thereby causing loss of cell viability. Data from two phase 1, placebo-controlled, single-ascending dose (SAD) and multiple-ascending dose (MAD) studies evaluating safety, tolerability, and pharmacokinetics of FMGX (doses up to 1,000 mg, i.v. and p.o.) are presented. Eligible participants were healthy adults (aged 18 to 55 years) randomized to receive either FMGX or placebo. Across both phase 1 studies, 151 of 154 participants (aged 23 to 35 years; FMGX: 116, placebo: 38) completed the study. Administration of FMGX i.v. demonstrated linear- and dose-proportional pharmacokinetics of MGX in terms of geometric mean maximum concentration of drug in serum (Cmax) (SAD: 0.16 to 12.0 µg/mL, dose: 10 to 1,000 mg; MAD: 0.67 to 15.4 µg/mL, dose: 50 to 600 mg) and area under the concentration-time curve (AUC) (SAD: 4.05 to 400, MAD: 6.39 to 245 µg · h/mL). With single and repeat p.o., dose-proportional increases in Cmax (SAD: 1.30 to 6.41 µg/mL, dose: 100 to 500 mg; MAD: 6.18 to 21.3 µg/mL, dose: 500 to 1,000 mg) and AUC (SAD: 87.5 to 205, MAD: 50.8 to 326 µg · h/mL) were also observed, with high oral bioavailability (90.6% to 101.2%). Administration of FMGX p.o. under post cibum conditions improved tolerability versus ante cibum conditions. No severe treatment-emergent adverse events (TEAEs), serious AEs, or withdrawals due to a drug-related TEAEs were reported with single or multiple i.v. and p.o. doses. Preclinical target exposures were achieved and were not accompanied by any serious/unexpected concerns with generally safe and well-tolerated dose regimens.

Predicting the Pharmacokinetics of Orally Administered Drugs across BCS Classes 1-4 by Virtual Bioequivalence Model.

To evaluate the influence of solubility and permeability on the pharmacokinetic prediction performance of orally administered drugs using avirtual bioequivalence (VBE) model, a total of 23 orally administered drugs covering Biopharmaceutics Classification System (BCS) classes 1-4 were selected. A VBE model (i.e., a physiologically based pharmacokinetic model integrated with dissolution data) based on a B2O simulator was applied for pharmacokinetic (PK) prediction in a virtual population. Parameter sensitivity analysis was used for input parameter selection. The predictive performances of PK parameters (i.e., AUC0-t, Cmax, and Tmax), PK profiles, and bioequivalence (BE) results were evaluated using the twofold error, average fold error (AFE), absolute average fold error (AAFE), and BE reassessment metrics. All models successfully simulated the mean PK profiles, with AAFE < 2 and AFE ranging from 0.58 to 1.66. As for the PK parameters, except for the time of peak concentration, Tmax, of isosorbide mononitrate, other simulated PK parameters were all within a twofold error. The simulated PK behaviors were comparable to the observed ones, both for test (T) and reference (R) products, and the simulated T/R arithmetic mean ratios were all within 0.88-1.16 of the observed values. These four evaluation metrics were distributed equally among BCS class 1-4 drugs. The VBE model showed powerful performance to predict the PK behavior of orally administered drugs with various combinations of solubility and permeability, irrespective of the BCS category.

Rule of five violations among the FDA-approved small molecule protein kinase inhibitors.

Because genetic alterations including mutations, overexpression, translocations, and dysregulation of protein kinases are involved in the pathogenesis of many illnesses, this enzyme family is the target of many drug discovery programs in the pharmaceutical industry. Overall, the US FDA has approved 74 small molecule protein kinase inhibitors, nearly all of which are orally effective. Of the 74 approved drugs, thirty-nine block receptor protein-tyrosine kinases, nineteen target nonreceptor protein-tyrosine kinases, twelve are directed against protein-serine/threonine protein kinases, and four target dual specificity protein kinases. The data indicate that 65 of these medicinals are approved for the management of neoplasms (51 against solid tumors such as breast, colon, and lung cancers, eight against nonsolid tumors such as leukemia, and six against both types of tumors). Nine of the FDA-approved kinase inhibitors form covalent bonds with their target enzymes and they are accordingly classified as TCIs (targeted covalent inhibitors). Medicinal chemists have examined the physicochemical properties of drugs that are orally effective. Lipinski's rule of five (Ro5) is a computational procedure that is used to estimate solubility, membrane permeability, and pharmacological effectiveness in the drug-discovery setting. It relies on four parameters including molecular weight, number of hydrogen bond donors and acceptors, and the Log of the partition coefficient. Other important descriptors include the lipophilic efficiency, the polar surface area, and the number of rotatable bonds and aromatic rings. We tabulated these and other properties of the FDA-approved kinase inhibitors. Of the 74 approved drugs, 30 fail to comply with the rule of five.

Small molecule protein kinase inhibitors approved by regulatory agencies outside of the United States.

Owing to genetic alterations and overexpression, the dysregulation of protein kinases plays a significant role in the pathogenesis of many autoimmune and neoplastic disorders and protein kinase antagonists have become an important drug target. Although the efficacy of imatinib in the treatment of chronic myelogenous leukemia in the United States in 2001 was the main driver of protein kinase inhibitor drug discovery, this was preceded by the approval of fasudil (a ROCK antagonist) in Japan in 1995 for the treatment of cerebral vasospasm. There are 21 small molecule protein kinase inhibitors that are approved in China, Japan, Europe, and South Korea that are not approved in the United Sates and 75 FDA-approved inhibitors in the United States. Of the 21 agents, eleven target receptor protein-tyrosine kinases, eight inhibit nonreceptor protein-tyrosine kinases, and two block protein-serine/threonine kinases. All 21 drugs are orally bioavailable or topically effective. Of the non-FDA approved drugs, sixteen are prescribed for the treatment of neoplastic diseases, three are directed toward inflammatory disorders, one is used for glaucoma, and fasudil is used in the management of vasospasm. The leading targets of kinase inhibitors approved by both international regulatory agencies and by the FDA are members of the EGFR family, the VEGFR family, and the JAK family. One-third of the 21 internationally approved drugs are not compliant with Lipinski's rule of five for orally bioavailable drugs. The rule of five relies on four parameters including molecular weight, number of hydrogen bond donors and acceptors, and the Log of the partition coefficient.

Investigating the Impact of Co-processed Excipients on the Formulation of Bromhexine Hydrochloride Orally Disintegrating Tablets (ODTs).

PURPOSE: Orodispersible tablets (orally disintegrating tablets, ODTs) have been used in pharmacotherapy for over 20 years since they overcome the problems with swallowing solid dosage forms. The successful formula manufactured by direct compression shall ensure acceptable mechanical strength and short disintegration time. Our research aimed to develop ODTs containing bromhexine hydrochloride suitable for registration in accordance with EMA requirements. METHODS: We examined the performance of five multifunctional co-processed excipients, i.e., F-Melt® C, F-Melt® M, Ludiflash®, Pharmaburst® 500 and Prosolv® ODT G2 as well as self-prepared physical blend of directly compressible excipients. We tested powder flow, true density, compaction characteristics and tableting speed sensitivity. RESULTS: The manufacturability studies confirmed that all the co-processed excipients are very effective as the ODT formula constituents. We noticed superior properties of both F-Melt's®, expressed by good mechanical strength of tablets and short disintegration time. Ludiflash® showed excellent performance due to low works of plastic deformation, elastic recovery and ejection. However, the tablets released less than 30% of the drug. Also, the self-prepared blend of excipients was found sufficient for ODT application and successfully transferred to production scale. Outcome of the scale-up trial revealed that the tablets complied with compendial requirements for orodispersible tablets. CONCLUSIONS: We proved that the active ingredient cannot be absorbed in oral cavity and its dissolution profiles in media representing upper part of gastrointestinal tract are similar to marketed immediate release drug product. In our opinion, the developed formula is suitable for registration within the well-established use procedure without necessity of bioequivalence testing.

Design, synthesis and biological evaluation of chalcone derivatives as potent and orally active hCYP3A4 inhibitors.

Human cytochrome P450 3A4 (hCYP3A4), one of the most important drug-metabolizing enzymes, catalyze the metabolic clearance of ∼50% therapeutic drugs. CYP3A4 inhibitors have been used for improving the in vivo efficacy of hCYP3A4-substrate drugs. However, most of existing hCYP3A4 inhibitors may trigger serious adverse effects or undesirable effects on endogenous metabolism. This study aimed to discover potent and orally active hCYP3A4 inhibitors from chalcone derivatives and to test their anti-hCYP3A4 effects both in vitro and in vivo. Following three rounds of screening and structural optimization, the isoquinoline chalcones were found with excellently anti-hCYP3A4 effects. SAR studies showed that introducing an isoquinoline ring on the A-ring significantly enhanced anti-CYP3A4 effect, generating A10 (IC50 = 102.10 nM) as a promising lead compound. The 2nd round of SAR studies showed that introducing a substituent group at the para position of the carbonyl group on B-ring strongly improved the anti-CYP3A4 effect. As a result, C6 was identified as the most potent hCYP3A4 inhibitor (IC50 = 43.93 nM) in human liver microsomes (HLMs). C6 also displayed potent anti-hCYP3A4 effect in living cells (IC50 = 153.00 nM), which was superior to the positive inhibitor ketoconazole (IC50 = 251.00 nM). Mechanistic studies revealed that C6 could potently inhibit CYP3A4-catalyzed N-ethyl-1,8-naphthalimide (NEN) hydroxylation in a competitive manner (Ki = 30.00 nM). Moreover, C6 exhibited suitable metabolic stability in HLMs and showed good safety profiles in mice. In vivo tests demonstrated that C6 (100 mg/kg, orally administration) significantly increased the AUC(0-inf) of midazolam by 3.63-fold, and strongly prolonged its half-life by 1.66-fold compared with the vehicle group in mice. Collectively, our findings revealed the SARs of chalcone derivatives as hCYP3A4 inhibitors and offered several potent chalcone-type hCYP3A4 inhibitors, while C6 could serve as a good lead compound for developing novel, orally active CYP3A4 inhibitors with improved druglikeness properties.

Uptake and availability of new outpatient cancer medicines in 2010-2021 in Nordic countries - survey of competent authorities.

BACKGROUND: Nordic countries excel in cancer care, but studies on uptake, costs, or managed entry agreements of cancer medicines have not been conducted recently. The aim of this study was to examine the uptake and availability of orally administered new cancer medicines in Nordic countries. Orally administered cancer medicines enable and are used in the community as part of outpatient care. Firstly, we studied the distribution, costs and adoption of managed entry agreements of these medicines, and secondly, uptake of and managed entry agreements for cancer medicines used in outpatient care that were granted marketing authorization in Europe in 2010-2021. METHODS: An E-mail survey of competent authorities, meaning pharmaceutical service organizers, payers or other government or non-government actors developing pharmaceutical service operations, in Denmark, Finland, Iceland, Norway, and Sweden in April-June 2022. The data were analysed using frequencies and percentages for descriptive analysis. RESULTS: The distribution of cancer medicines has similarities in Finland, Iceland, Norway, and Sweden, where cancer medicines can be distributed both via hospitals or hospital pharmacies for inpatient use, and via community pharmacies for outpatient use. In Denmark, cancer medicines are predominantly distributed via publicly funded hospitals. In all countries that provided data on the costs, the costs of cancer medicines had notably gone up from 2010 to 2021. The number of reimbursable medicines out of new cancer medicines varied from 36 products in Denmark and Iceland to 51 products in Sweden, out of 67 studied products. Managed entry agreements, often with confidential discounts, were in use in all Nordic countries. The number of agreements and the cancer types for which agreements were most often made varied from three agreements made in Iceland to 35 agreements made in Finland, out of 67 studied products. Average days from authorization to reimbursement of new cancer medicines varied from an average of 416 to 895 days. CONCLUSIONS: Nordic countries share similar characteristics but also differ in terms of the details in distribution, adopted managed entry agreements, market entry, and availability of new orally administered cancer medicines used in the outpatient care. The costs of cancer medicines have increased in all Nordic countries during the last decade. Due to differences in health care and because orally administered cancer medicines can be dispensed at community and hospital pharmacies in all studied countries other than Denmark, the number of reimbursable medicines and managed entry agreements vary between countries. However, Nordic countries show good agreement for 2010 to 2021 in entry and reimbursement decisions of novel cancer medicines.

An Overview and Discussion of N-nitrosamine Considerations for Orally Inhaled Drug Products and Relevance to Other Dosage Forms.

The presence of N-nitrosamines in drug products are currently an area of high regulatory and industry scrutiny, having been detected above acceptable regulatory levels in several solid oral drug products. For over 20 years, there has been an expectation that N-nitrosamines be eliminated or controlled to acceptable levels in orally inhaled and nasal drug products (OINDP). As a result, the OINDP industry has developed and implemented risk management processes and considerations to address N-nitrosamines in final drug product, including management and understanding of upstream supply particularly for OINDP device and container closure systems. We provide an overview of N-nitrosamine formation, discuss key current regulatory expectations worldwide for N-nitrosamines in drug products, discuss risk management approaches relevant for drug device combination products, and share analytical "tips" with respect to handling N-nitrosamines chemical assessments.