Highly Emissive Lanthanide-Based 0D Metal Halide Nanocrystals for Efficient Ultraviolet Photodetector.

Recently, lanthanide-based 0D metal halides have attracted considerable attention for their applications in X-ray imaging, light-emitting diodes (LEDs), sensors, and photodetectors. Herein, lead-free 0D gadolinium-alloyed cesium cerium chloride (Gd3+-alloyed Cs3CeCl6) nanocrystals (NCs) are introduced as promising materials for optoelectronic application owing to their unique optical properties. The incorporation of Gd3+ in Cs3CeCl6 (CCC) NCs is proposed to increase the photoluminescence quantum yield (PLQY) from 57% to 96%, along with significantly enhanced phase and chemical stability. The structural analysis is performed by density functional theory (DFT) to confirm the effect of Gd3+ in Cs3Ce1- xGdxCl6 (CCGC) alloy system. Moreover, the CCGC NCs are applied as the active layer in UVPDs with different Gd3+ concentration. The excellent device performance is shown at 20% of Gd3+ in CCGC NCs with high detectivity (7.938 × 1011 Jones) and responsivity (0.195 A W-1) at -0.1 V at 310 nm. This study paves the way for the development of lanthanide-based metal halide NCs for next-generation UVPDs and other optoelectronic applications.

Accounting for photosystem I photoinhibition sheds new light on seasonal acclimation strategies of boreal conifers.

The photosynthetic acclimation of boreal evergreen conifers is controlled by regulatory and photoprotective mechanisms that allow conifers to cope with extreme environmental changes. However, the underlying dynamics of photosystem II (PSII) and photosystem I (PSI) remain unresolved. Here, we investigated the dynamics of PSII and PSI during the spring recovery of photosynthesis in Pinus sylvestris and Picea abies using a combination of chlorophyll a fluorescence, P700 difference absorbance measurements, and quantification of key thylakoid protein abundances. In particular, we derived a new set of PSI quantum yield equations, correcting for the effects of PSI photoinhibition. Using the corrected equations, we found that the seasonal dynamics of PSII and PSI photochemical yields remained largely in balance, despite substantial seasonal changes in the stoichiometry of PSII and PSI core complexes driven by PSI photoinhibition. Similarly, the previously reported seasonal up-regulation of cyclic electron flow was no longer evident, after accounting for PSI photoinhibition. Overall, our results emphasize the importance of considering the dynamics of PSII and PSI to elucidate the seasonal acclimation of photosynthesis in overwintering evergreens. Beyond the scope of conifers, our corrected PSI quantum yields expand the toolkit for future studies aimed at elucidating the dynamic regulation of PSI.

Fluorescent Properties of Cyanine Dyes As a Matter of the Environment.

In non-viscous aqueous solutions, the cyanine fluorescent dyes Cy3 and Cy5 have rather low fluorescence efficiency (the fluorescence quantum yields of Cy3 and Cy5 are 0.04 and 0.3, respectively [1, 2]) and short excited state lifetimes due to their structural features. In this work, we investigated the effect of solubility and rotational degrees of freedom on the fluorescence efficiency of Cy3 and Cy5 in several ways. We compared the fluorescence efficiencies of two cyanine dyes sCy3 and sCy5 with the introduction of a sulfonyl substituent in the aromatic ring as well as covalently bound to T10 oligonucleotides. The results show that because of the different lengths of the polymethine chains between the aromatic rings of the dyes, cis-trans-isomerization has a much greater effect on the Cy3 molecule than on the Cy5 molecule, while the effect of aggregation is also significant.

Design and Synthesis of CdHgSe/HgS/CdZnS Core/Multi-Shell Quantum Dots Exhibiting High-Quantum-Yield Tissue-Penetrating Shortwave Infrared Luminescence.

Cdx Hg1- x Se/HgS/Cdy Zn1- y S core/multi-shell quantum dots (QDs) exhibiting bright tissue-penetrating shortwave infrared (SWIR; 1000-1700 nm) photoluminescence (PL) are engineered. The new structure consists of a quasi-type-II Cdx Hg1- x Se/HgS core/inner shell domain creating luminescent bandgap tunable across SWIR window and a wide-bandgap Cdy Zn1- y S outer shell boosting the PL quantum yield (QY). This compositional sequence also facilitates uniform and coherent shell growth by minimizing interfacial lattice mismatches, resulting in high QYs in both organic (40-80%) and aqueous (20-70%) solvents with maximum QYs of 87 and 73%, respectively, which are comparable to those of brightest visible-to-near infrared QDs. Moreover, they maintain bright PL in a photocurable resin (QY 40%, peak wavelength ≈ 1300 nm), enabling the fabrication of SWIR-luminescent composites of diverse morphology and concentration. These composites are used to localize controlled amounts of SWIR QDs inside artificial (Intralipid) and porcine tissues and quantitatively evaluate the applicability as luminescent probes for deep-tissue imaging.

Highly Efficient Oxindole-Based Molecular Photoswitches.

3-Benzylidene-indoline-2-ones play a prominent role in the pharmaceutical industry due to the diverse biomedical applications of oxindole heterocycles. Despite the extensive reports on their biological properties, these compounds have hardly been studied for their photochemical activity. Here, we present 3-benzylidene-indoline-2-ones as a promising class of photoswitches with high yields, robust photochemical switching with quantum yields reaching up to 50 % and potential for biological applications.

A kinetic study of the photolysis of sulfamethoxazole with special emphasis on the photoisomer.

The previously not studied photochemical degradation of sulfamethoxazole (SMX) to the isomer of SMX (ISO) was measured via a polychromatic (Xe) and a monochromatic (Hg) light source and accompanied by quantum chemical DFT calculations. In addition to the [Formula: see text] of ISO, tautomer-dependent properties such as the [Formula: see text] were measured and theoretically confirmed by DFT. The kinetics in solutions below and above the [Formula: see text] of SMX were studied for the available and quantifiable products SMX, ISO, 3-amino-5-methylisoxazole (AMI), 2-amino-5-methyloxazole (AMO), and sulfanilic acid (SUA). The quantum yields of the neutral ([Formula: see text]) and anionic [Formula: see text]) forms of SMX ([Formula: see text], [Formula: see text]) and ISO ([Formula: see text] and [Formula: see text]) were found to be wavelength-independent. In a competitive reaction to the formation of ISO from SMX, the degradation product TP271 is formed. Various proposed structures for TP271 described in the literature have been studied quantum mechanically and can be excluded for thermodynamic reasons. In real samples in a northern German surface water in summer 2021 mean concentrations of SMX were found in the range of 120 ng/L. In agreement with the pH-dependent yields, concentrations of ISO were low in the range of 8 ng/L.

Concerning the photophysics of fluorophores towards tailored bioimaging compounds: a case study involving S100A9 inflammation markers.

A full understanding concerning the photophysical properties of a fluorescent label is crucial for a reliable and predictable performance in biolabelling applications. This holds true not only for the choice of a fluorophore in general, but also for the correct interpretation of data, considering the complexity of biological environments. In the frame of a case study involving inflammation imaging, we report the photophysical characterization of four fluorescent S100A9-targeting compounds in terms of UV-vis absorption and photoluminescence spectroscopy, fluorescence quantum yields (ΦF) and excited state lifetimes (τ) as well as the evaluation of the radiative and non-radiative rate constants (kr and knr, respectively). The probes were synthesized based on a 2-amino benzimidazole-based lead structure in combination with commercially available dyes, covering a broad color range from green (6-FAM) over orange (BODIPY-TMR) to red (BODIPY-TR) and near-infrared (Cy5.5) emission. The effect of conjugation with the targeting structure was addressed by comparison of the probes with their corresponding dye-azide precursors. Additionally, the 6-FAM and Cy5.5 probes were measured in the presence of murine S100A9 to determine whether protein binding influences their photophysical properties. An interesting rise in ΦF upon binding of 6-FAM-SST177 to murine S100A9 enabled the determination of its dissociation equilibrium constant, reaching up to KD = 324 nM. This result gives an outlook for potential applications of our compounds in S100A9 inflammation imaging and fluorescence assay developments. With respect to the other dyes, this study demonstrates how diverse microenvironmental factors can severely impair their performance while rendering them poor performers in biological media, showing that a preliminary photophysical screening is key to assess the suitability of a particular luminophore.

Photo-Induced Fluorochromism of a Star-Shaped Photochromic Dye with 2,4-Dimethylthiazole Attaching to Triangle Terthiophene.

A photochrmic triangle terthiophene dye with 2,4-dimethylthiazole attached was synthesized and shows regular photochromic properties when irradiated with UV/Vis light alternately. It was found that the attaching of 2,4-dimethylthiazole has a significant effect on both the photochromism and fluorescence of triangle terthiophene. During the photocyclizatioin prcess, not only the color but also the fluorescence of the dye in THF can be toggled between ring-open and ring-closed forms of the dye. Additionally, the absolute quantum yields (AQY) of ring-open and ring-closed forms of the dye (0.32/0.58) were greatly larger than the literature report. Along with the 254 nm light irradiation, the fluorescence color changed from deep blue (428 nm) to sky blue (486 nm) in THF. A fluorochromism cycle could be established based on the UV/visible light irradiation cycle, which provides a strategy for the design of new type fluorescent diarylethene derivatives for biological application.

Luminescence of In(III)Cl-etioporphyrin-I.

The luminescent and photophysical properties of the etioporphyrin-I complex with indium(III) chloride, InCl-EtioP-I were experimentally studied at room and liquid nitrogen temperatures in pure and mixed toluene solutions. At 77 K, in a 1:2 mixture of toluene with diethyl ether, the quantum yield of phosphorescence reaches 10.2%, while the duration of phosphorescence is 17 ms. At these conditions, the ratio of phosphorescence-to-fluorescence integral intensities is equal to 26.1, which is the highest for complexes of this type. At 298 K, the quantum yield of the singlet oxygen generation is maximal in pure toluene (81%). Quantum-chemical calculations of absorption and fluorescence spectra at temperatures of 77 K and 298 K qualitatively coincide with the experimental data. The InCl-EtioP-I compound will further be used as a photoresponsive material in thin-film optoelectronic devices.

Photon- and Singlet-Oxygen-Induced Cis-Trans Isomerization of the Water-Soluble Carotenoid Crocin.

Studying the cis-trans isomerization process in crocin (CR), one of the few water-soluble carotenoids extracted from saffron, is important to better understand the physiological role of cis-carotenoids in vivo and their potential as antioxidants in therapeutic applications. For that, cis-trans isomerization of both methanol- and water-dissolved CR was induced by light or thermally generated singlet oxygen (1O2). The kinetics of molecular concentrations were monitored by both high-performance liquid chromatography (HPLC) and non-destructive spectrophotometric methods. These last made it possible to simultaneously follow the cis-trans isomerization, the possible bleaching of compounds and the amount of thermally generated 1O2. Our results were in accordance with a comprehensive model where the cis-trans isomerization occurs as relaxation from the triplet state of all-trans- or 13-cis-CR, whatever is the way to populate the CR triplet state, either by photon or 1O2 energy transfer. The process is much more (1.9 to 10-fold) efficient from cis to trans than vice versa. In H2O, a 1O2-induced bleaching effect on the starting CR was not negligible. However, the CR "flip-flop" isomerization reaction could still occur, suggesting that this process can represent an efficient mechanism for quenching of reactive oxygen species (ROS) in vivo, with a limited need of carotenoid regeneration.

High-Performance Near-Infrared Chlorinated Rylenecarboximide Fluorophores via Consecutive C-N and C-C Bond Formation.

A new class of near-infrared (NIR) fluorophores, PAI, is obtained by consecutive C-N/C-C bond formation between diphenylamines and 9,10-dibromoperylenecarboximide. Owing to the rigid structure, extended π-conjugation and pronounced push-pull substitution, these fluorophores show emission maxima up to 804 nm and large Stokes shifts. The extraordinarily high fluorescence quantum yields from 47 % to 70 % are attributed to chloro substitution in the bay positions of the perylene core. These characteristics, together with high photostability, qualify them as useful NIR emitters for applications as biomarkers and security inks.

Controlled Core/Crown Growth Enables Blue-Emitting Colloidal Nanoplatelets with Efficient and Pure Photoluminescence.

Colloidal semiconductor CdSe nanoplatelets (NPLs) feature ultranarrow and anisotropic emissions. However, the optical performance of blue-emitting NPLs is deteriorated by trap states, currently exhibiting tainted emissions and inferior photoluminescence quantum yields (PLQYs). Here, near trap-free blue-emitting NPLs are achieved by the controlled growth of the core/crown. Deep trap states in NPLs can be partially suppressed with the asymmetrical crown growth and are further suppressed with the growth of the small core and the alloyed symmetrical crown, yielding NPLs with pure blue emissions and near-unity PLQYs. Exciton dynamic research based on these NPLs indicates that the trap emission stems from surface traps. Besides, light-emitting diodes exhibiting ultranarrow emission centered around 461 nm with full-width-at-half-maximums down to 11 nm are fabricated using these NPLs.

A Precipitation-Enhanced Emission (PEE) Strategy for Increasing the Brightness and Reducing the Liver Retention of NIR-II Fluorophores.

The lack of organic fluorophores with high quantum yields (QYs) and low liver retention in the second near-infrared (NIR-II) window has become a bottleneck in the bioimaging field. An approach to address these problems is proposed by encapsulating phosphorylated fluorescent dyes into biodegradable calcium phosphate nanoparticles. First, an NIR-II molecule, LJ-2P, is designed with increased water solubility by introducing two phosphate groups. Meanwhile, LJ-2P co-precipitates with calcium ions to form LJ-2P nanoparticles (NPs). The QYs of LJ-2P NPs in aqueous solution is increased by 36.57-fold to 5.12% compared with that of LJ-2P. This unique phenomenon is named as precipitation-enhanced emission (PEE), whose detailed mechanism is explored by femtosecond transient absorption. It is demonstrated that co-precipitation of LJ-2P with calcium ions changes the micro-environment, which restricts the molecular rotation and reduces the interaction of water molecules, especially the excited-state proton transfer. In addition, due to the pH-sensitive nature, more than 80% of the LJ-2P NPs are metabolized in the liver within 24 h. Based on the excellent optical properties and good biocompatibility, high-contrast vascular visualization and breast tumor detecting are achieved. This strategy can apply to other NIR-II fluorophores to achieve high QYs and low liver retention.

Genetic architecture of photosynthesis energy partitioning as revealed by a genome-wide association approach.

The photosynthesis process is determined by the intensity level and spectral quality of the light; therefore, leaves need to adapt to a changing environment. The incident energy absorbed can exceed the sink capability of the photosystems, and, in this context, photoinhibition may occur in both photosystem II (PSII) and photosystem I (PSI). Quantum yield parameters analyses reveal how the energy is managed. These parameters are genotype-dependent, and this genotypic variability is a good opportunity to apply mapping association strategies to identify genomic regions associated with photosynthesis energy partitioning. An experimental and mathematical approach is proposed for the determination of an index which estimates the energy per photon flux for each spectral bandwidth (Δλ) of the light incident (QI index). Based on the QI, the spectral quality of the plant growth, environmental lighting, and the actinic light of PAM were quantitatively very similar which allowed an accurate phenotyping strategy of a rice population. A total of 143 genomic single regions associated with at least one trait of chlorophyll fluorescence were identified. Moreover, chromosome 5 gathers most of these regions indicating the importance of this chromosome in the genetic regulation of the photochemistry process. Through a GWAS strategy, 32 genes of rice genome associated with the main parameters of the photochemistry process of photosynthesis in rice were identified. Association between light-harvesting complexes and the potential quantum yield of PSII, as well as the relationship between coding regions for PSI-linked proteins in energy distribution during the photochemical process of photosynthesis is analyzed.

Naphthalenediimides with High Fluorescence Quantum Yield: Bright-Red, Stable, and Responsive Fluorescent Dyes.

The naphthalenediimide (NDI) scaffold in contrast to its higher congeners possess low-fluorescence. In spite of elegant synthetic developments, a highly emissive NDI is quite rare to find, as well as, a green-light-emitting NDI is yet to be explored. Herein, we report a novel class of symmetric and asymmetric NH2 -substituted core-NDIs (1-5) with tunable fluorescence in the visible region and extending to the NIR frontier. Importantly, the bis-NH2 -substituted NDI 2 revealed quantum yield, Φ f of ≈81 and ≈68 % in toluene and DMSO, respectively, suggesting versatility of the fluorophore in a wide range of solvent polarity. The dye 1 is shown to be the first NDI-based green-light emitter. The donor piperidine group in 5 diminish the Φ f by 40-fold providing a lever to modulate the excited-state intramolecular proton transfer (ESIPT) process. Our synthetic protocol applies a Pd catalyst and a benign hydride source simplifying the non-trivial -NH2 group integration at the NDI-core. TD-DFT calculations predicted strong intramolecular hydrogen bonds in the excited state in the bulk nonpolar medium and responsiveness to solvent polarity. The maximization of the NDI emission outlined here would further boost the burgeoning repertoire of applications of the NDI scaffold.

Photoluminescent Carbon Quantum Dots: Synthetic Approaches and Photophysical Properties.

A number of synthetic methodologies and applications of carbon quantum dots (CQDs) have been reported since they were first discovered nearly two decades ago. Unlike metal-based or semiconductor-based (e. g., metal chalcogenides) quantum dots (MSQDs), CQDs have the unique feature of being prepared through a variety of synthetic protocols, which are typically understood from considerations of reaction models and photoluminescence mechanisms. Consequently, this brief review article describes quantum dots, in general, and CQDs, in particular, from various viewpoints: (i) their definition, (ii) their photophysical properties, and (iii) the superiority of CQDs over MSQDs. Where possible, comparisons are made between CQDs and MSQDs. First, however, the review begins with a general brief description of quantum dots (QDs) as nanomaterials (sizes≤10 nm), followed by a short description of MSQDs and CQDs. Described subsequently are the various top-down and bottom-up approaches to synthesize CQDs followed by their distinctive photophysical properties (emission spectra; quantum yields, Φs).

Photoproduction Rates of One-Electron Reductants by Chromophoric Dissolved Organic Matter via Fluorescence Spectroscopy: Comparison with Superoxide and Hydrogen Peroxide Rates.

One-electron reductants (OER) photoproduced by chromophoric dissolved organic matter (CDOM) have been shown to be likely precursors for the formation of superoxide and subsequently hydrogen peroxide. An improved method that employs a nitroxide radical probe (3AP) has been developed and utilized to determine the photoproduction rates of OER from a diverse set of CDOM samples. 3AP reacts with OER to produce the hydroxylamine, which is then derivatized with fluorescamine and quantified spectrofluorometrically. Although less sensitive than traditional methods for measuring RO2•-, measuring RH provides a simpler and faster method of estimating RO2•- and is amenable to continuous measurement via flow injection analysis. Production rates of OER (RH), superoxide (RO2•-), and hydrogen peroxide (RH2O2) have a similar wavelength dependence, indicating a common origin. If all the OER react with molecular oxygen to produce superoxide, then the simplest mechanism predicts that RH/RH2O2 and RO2•-/RH2O2 should be equal to 2. However, our measurements reveal RH/RH2O2 values as high as 16 (5.7-16), consistent with prior results, and RO2•-/RH2O2 values as high as 8 (5.4-8.2). These results indicate that a substantial fraction of superoxide (65-88%) is not undergoing dismutation. A reasonable oxidative sink for superoxide is reaction with photoproduced phenoxy radicals within CDOM.

Mechanistic Aspects Regarding the Ultraviolet Degradation of Polychlorinated Biphenyls in Different Media: Insights from Carbon and Chlorine Isotope Fractionation.

In this study, the carbon and chlorine isotope fractionation during ultraviolet-photolysis of polychlorinated biphenyls (PCBs, including PCB18, PCB77, PCB110, and PCB138) in n-hexane (Hex), methanol/water (MeOH/H2O), and silica gel was first investigated to explore their mechanistic processes. We observed a significant variation in ΛCl-C (εCl/εC) for the same PCBs in different photochemical systems, implying that PCB degradation processes in various photoreaction systems could differ. Although all substrates showed normal apparent carbon/chlorine kinetic isotope effects (C-/Cl-AKIE >1), the putative inverse C-AKIE of nondechlorinated pathways was suggested by 13C depletion of the average carbon isotope composition of PCB138 and corresponding dechlorinated products in MeOH/H2O, which might originate from the magnetic isotope effect. Significant negative correlations were found between C-AKIE and relative disappearance quantum yields ("Φ") of ortho-dechlorinated substrates (PCB18, PCB110, and PCB138) in Hex and MeOH/H2O. However, the C-AKIE and "Φ" of PCB77 (meta/para-dechlorinated congener) obviously deviated from the above correlations. Furthermore, significantly different product-related carbon isotope enrichment factors of PCB77 in Hex were found. These results demonstrated the existence of dechlorination position-specific and masking effects in carbon isotope fractionations.

Double 3-Ethyl-2,4-dimethylpyrrole Configured Fluorescent Dye with Fluorine-Boron as the Bridge.

Dipyrrolydiketones BF2 complex was synthesized and characterized by NMR, HRMS, and single crystal diffraction. In non-polar environment, this BF2 containing dye emitted bright blue-green fluorescence. No significant spectra shift was observed both in absorption and emission spectra, which indicates the insensitivity of absorption/emission toward environment. The alkyl substituted pyrrole rings lead to its highly emission character in solid state by enhancing the distance between dye molecules. Absolute quantum yields were determined to be 0.51-0.78/0.36 in selected organic medium and solid state, respectively. The emission dynamics was investigated by fluorescence lifetime and both monoexponential and bi-exponential decay was observed.

P∩N Bridged Cu(I) Dimers Featuring Both TADF and Phosphorescence. From Overview towards Detailed Case Study of the Excited Singlet and Triplet States.

We present an overview over eight brightly luminescent Cu(I) dimers of the type Cu2X2(P∩N)3 with X = Cl, Br, I and P∩N = 2-diphenylphosphino-pyridine (Ph2Ppy), 2-diphenylphosphino-pyrimidine (Ph2Ppym), 1-diphenylphosphino-isoquinoline (Ph2Piqn) including three new crystal structures (Cu2Br2(Ph2Ppy)3 1-Br, Cu2I2(Ph2Ppym)3 2-I and Cu2I2(Ph2Piqn)3 3-I). However, we mainly focus on their photo-luminescence properties. All compounds exhibit combined thermally activated delayed fluorescence (TADF) and phosphorescence at ambient temperature. Emission color, decay time and quantum yield vary over large ranges. For deeper characterization, we select Cu2I2(Ph2Ppy)3, 1-I, showing a quantum yield of 81%. DFT and SOC-TDDFT calculations provide insight into the electronic structures of the singlet S1 and triplet T1 states. Both stem from metal+iodide-to-ligand charge transfer transitions. Evaluation of the emission decay dynamics, measured from 1.2 ≤ T ≤ 300 K, gives ∆E(S1-T1) = 380 cm-1 (47 meV), a transition rate of k(S1→S0) = 2.25 × 106 s-1 (445 ns), T1 zero-field splittings, transition rates from the triplet substates and spin-lattice relaxation times. We also discuss the interplay of S1-TADF and T1-phosphorescence. The combined emission paths shorten the overall decay time. For OLED applications, utilization of both singlet and triplet harvesting can be highly favorable for improvement of the device performance.