Adaptive cooling strategy via human hair: High optothermal conversion efficiency of solar radiation into thermal dissipation.

Natural species have developed complex nanostructures in a hierarchical pattern to control the absorption, reflection, or transmission of desired solar and infrared wavelengths. This bio-inspired structure is a promising method to manipulating solar energy and thermal management. In particular, human hair is used in this article to highlight the optothermal properties of bio-inspired structures. This study investigated how melanin, an effective solar absorber, and the structural morphology of aligned domains of keratin polymer chains, leading to a significant increase in solar path length, which effectively scatter and absorb solar radiation across the hair structure, as well as enhance thermal ramifications from solar absorption by fitting its radiative wavelength to atmospheric transmittance for high-yield radiative cooling with realistic human body thermal emission.

Bioinspired zero-energy thermal-management device based on visible and infrared thermochromism for all-season energy saving.

Radiative thermal management provides a zero-energy strategy to reduce the demands of fossil energy for active thermal management. However, whether solar heating or radiative cooling, one-way temperature control will exacerbate all-season energy consumption during hot summers or cold winters. Inspired by the Himalayan rabbit's hair and Mimosa pudica's leaves, we proposed a dual-mode thermal-management device with two differently selective electromagnetic spectrums. The combination of visible and infrared "thermochromism" enables this device to freely switch between solar heating and radiative cooling modes by spontaneously perceiving the temperature without any external energy consumption. Numerical prediction shows that a dual-mode device exhibits an outstanding potential for all-season energy saving in terms of thermal management beyond most static or single-wavelength, range-regulable, temperature-responsive designs. Such a scalable and cost-efficient device represents a more efficient radiative thermal-management strategy toward applying in a practical scenario with dynamic daily and seasonal variations.

Self-adaptive integration of photothermal and radiative cooling for continuous energy harvesting from the sun and outer space.

The sun (∼6,000 K) and outer space (∼3 K) are two significant renewable thermodynamic resources for human beings on Earth. The solar thermal conversion by photothermal (PT) and harvesting the coldness of outer space by radiative cooling (RC) have already attracted tremendous interest. However, most of the PT and RC approaches are static and monofunctional, which can only provide heating or cooling respectively under sunlight or darkness. Herein, a spectrally self-adaptive absorber/emitter (SSA/E) with strong solar absorption and switchable emissivity within the atmospheric window (i.e., 8 to 13 µm) was developed for the dynamic combination of PT and RC, corresponding to continuously efficient energy harvesting from the sun and rejecting energy to the universe. The as-fabricated SSA/E not only can be heated to ∼170 °C above ambient temperature under sunshine but also be cooled to 20 °C below ambient temperature, and thermal modeling captures the high energy harvesting efficiency of the SSA/E, enabling new technological capabilities.

Highly Potent Transparent Passive Cooling Coating via Microphase-Separated Hydrogel Combining Radiative and Evaporative Cooling.

Transparent passive cooling materials can cool targets environmentally without interfering with light transmission or visual information reception. They play a prominent role in solar cells and flexible display cooling. However, achieving potent transparent cooling remains challenging, because light transmission is accompanied by thermal energy. Here we propose to realize effective passive cooling in transparent materials via a microscale phase separation hydrogel film. The poly(N-isopropylacrylamide-co-acrylamide) hydrogel presents light transmittance of >96% and infrared emissivity as high as 95%. The microphase-separated structure affords a higher enthalpy of evaporation. The film is highly adhesive. In field applications, it reduces temperatures by 9.14 °C compared to those with uncovered photovoltaic panels and 7.68 °C compared to those for bare flexible light-emitting diode screens. Simulations indicate that energy savings of 32.76-51.65 MJ m-2 year-1 can be achieved in typical tropical monsoon climates and temperate continental climates. We expect this work to contribute to energy-efficient materials and a carbon-neutral society.

Ultrahigh Passive Cooling Power in Hydrogel with Rationally Designed Optofluidic Properties.

The cooling power of a radiative cooler is more than halved in the tropics, e.g., Singapore, because of its harsh weather conditions including high humidity (84% on average), strong downward atmospheric radiation (∼40% higher than elsewhere), abundant rainfall, and intense solar radiation (up to 1200 W/m2 with ∼58% higher UV irradiation). So far, there has been no report of daytime radiative cooling that well achieves effective subambient cooling. Herein, through integrated passive cooling strategies in a hydrogel with desirable optofluidic properties, we demonstrate stable subambient (4-8 °C) cooling even under the strongest solar radiation in Singapore. The integrated passive cooler achieves an ultrahigh cooling power of ∼350 W/m2, 6-10 times higher than a radiative cooler in a tropical climate. An in situ study of radiative cooling with various hydration levels and ambient humidity is conducted to understand the interaction between radiation and evaporative cooling. This work provides insights for the design of an integrated cooler for various climates.

Supramolecularly Connected Armor-like Nanostructure Enables Mechanically Robust Radiative Cooling Materials.

Passive daytime radiative cooling (PDRC) is a promising practice to realize sustainable thermal management with no energy and resources consumption. However, there remains a challenge of simultaneously integrating desired solar reflectivity, environmental durability, and mechanical robustness for polymeric composites with nanophotonic structures. Herein, inspired by a classical armor shell of a pangolin, we adopt a generic design strategy that harnesses supramolecular bonds between the TiO2-decorated mica microplates and cellulose nanofibers to collectively produce strong interfacial interactions for fabricating interlayer nanostructured PDRC materials. Owing to the strong light scattering excited by hierarchical nanophotonic structures, the bioinspired film demonstrates a desired reflectivity (92%) and emissivity (91%) and an excellent temperature drop of 10 °C under direct sunlight. Notably, the film guarantees high strength (41.7 MPa), toughness (10.4 MJ m-3), and excellent environmental durability. This strategy provides possibilities in designing polymeric PDRC materials, further establishing a blueprint for other functional applications like soft robots, wearable devices, etc.

Facile and Widely Applicable Route to Self-Adaptive Emissivity Modulation: Energy-Saving Demonstration with Transparent Wood.

The cooling power provided by radiative cooling is unwanted during cold hours. Therefore, self-adaptive regulation is desired for radiative cooling, especially in all-weather applications. However, current routes for radiative cooling regulation are constrained by substrates and complicated processing. Here, self-adaptive radiative cooling regulation on various potential substrates (transparent wood, PET, normal glass, and cement) was achieved by a Fabry-Perot structure consisting of a silver nanowires (AgNWs) bottom layer, PMMA spacer, and W-VO2 top layer. The emissivity-modulated transparent wood (EMTW) exhibits an emissivity contrast of 0.44 (ε8-13-L = ∼0.19 and ε8-13-H = ∼0.63), which thereby yields considerable energy savings across different climate zones. The emissivity contrast can be adjusted by varying the spinning parameters during the deposition process. Positive emissivity contrast was also achieved on three other industrially relevant substrates via this facile and widely applicable route. This proves the great significance of the approach to the promotion and wide adoption of radiative cooling regulation concept in the built environment.

A Facile and Effective Design for Dynamic Thermal Management Based on Synchronous Solar and Thermal Radiation Regulation.

Passive solar heating and radiative cooling have attracted great interest in global energy consumption reduction due to their unique electricity-free advantage. However, static single radiation cooling or solar heating would lead to overcooling or overheating in cold and hot weather, respectively. To achieve a facile, effective approach for dynamic thermal management, a novel structured polyethylene (PE) film was engineered with a switchable cooling and heating mode obtained through a moisture transfer technique. The 100 µm PE film showed excellent solar modulation from 0.92 (dried state) to 0.32 (wetted state) and thermal modulation from 0.86 (dried state) to 0.05 (wetted state). Outdoor experiments demonstrated effective thermal regulation during both daytime and nighttime. Furthermore, our designed PE film can save 1.3-41.0% of annual energy consumption across the whole country of China. This dual solar and thermal regulation mechanism is very promising for guiding scalable approaches to energy-saving temperature regulation.

A Janus Spectrally Selective Glazing Toward All-Season Energy-Efficient Windows.

Windows offer the most promising avenue for mitigating energy consumption and reducing greenhouse gas emissions. However, the balance between comfortable natural lighting and all-season energy savings is often neglected in extensive explorations of energy-efficient windows. Herein, a Janus glazing is proposed that enables the switch of passive radiative cooling and heating under the precondition of conveying sufficient natural light. Measurement results indicate that the Janus window maintains a visible transmittance of 0.47, while possesses a near-infrared (NIR) reflectivity/absorptivity of 0.75/0.71 and a mid-infrared (MIR) emissivity of 0.94/0.13 for the cooling and heating modes, respectively. As demonstrated by the outdoor test, the Janus window realizes a reduction of 7.1 °C for room cooling and an increase of 0.4 °C for room heating compared with commercial low-e window, potentially conserving 13%-53% of the total building energy consumption across China. Meanwhile, attributed to the photothermal effect, the Janus window can elevate the surface temperature by 6.1 °C compared with the low-e window, which can effectively reduce fogging occurrences on the window surface for ensuring sunlight entrance in the cold-weather conditions. This strategy offers novel prospects for enhancing energy efficiency in diverse applications, including architectural windows, greenhouse cultivation, photovoltaic generation, etc.

Colored Radiative Cooling and Flame-Retardant Polyurethane-Based Coatings: Selective Absorption/Reflection in Solar Waveband.

The aesthetic demand has become an imperative challenge to advance the practical and commercial application of daytime radiative cooling technology toward mitigating climate change. Meanwhile, the application of radiative cooling materials usually focuses on the building surface, related tightly to fire safety. Herein, the absorption and reflection spectra of organic and inorganic colorants are first compared in solar waveband, finding that iron oxides have higher reflectivity in NIR region. Second, three kinds of iron oxides-based colorants are selected to combine porous structure and silicon-modified ammonium polyphosphate (Si-APP) to engineer colored polyurethane-based (PU) coating, thus enhancing the reflectivity and flame retardancy. Together with reflectivity of more than 90% in near-infrared waveband and infrared emissivity of ≈91%, average temperature drops of ≈5.7, ≈7.9, and ≈3.8 °C are achieved in porous PU/Fe2O3/Si-APP, porous PU/Fe2O3·H2O/Si-APP, and porous PU/Fe3O4·H2O/Si-APP, compared with dense control samples. The catalysis effect of iron oxides in the cross-linking reaction of pyrolysis products and dehydration mechanism of Si-APP enable PU coating to produce an intumescent and protective char residue. Consequently, PU composite coatings demonstrate desirable fire safety. The ingenious choice of colorants effectively minimizes the solar heating effect and trades off the daytime radiative cooling and aesthetic appearance requirement.

Adaptive Thermal Management Radiative Cooling Smart Window with Perfect Near-Infrared Shielding.

The architectural window with spectrally selective features and radiative cooling is an effective way to save building energy consumption. However, architectural windows that combine both functions are currently based on micro-nano photonic structures, which undoubtedly hinder their commercial application due to the complexity of manufacture. Herein, a novel tunable visible light transmittance radiative cooling smart window (TTRC smart window) with perfect near-infrared (NIR) shielding ability is manufactured via a mass-producible scraping method. TTRC smart window presents high luminous transmittance (Tlum = 56.8%), perfect NIR shielding (TNIR = 3.4%), bidirectional transparency adjustment ability unavailable in other transparent radiative coolers based on photonic structures (ΔTlum = 54.2%), and high emittance in the atmospheric window (over 94%). Outdoor measurements confirm that smart window can reduce 8.2 and 6.6 °C, respectively, compared to ordinary glass and indium tin oxide (ITO) glass. Moreover, TTRC smart window can save over 20% of annual energy in the tropics compared to ITO and ordinary glass. The simple preparation method employed in this work and the superior optical properties of the smart window have significantly broadened the scope of application of architectural windows and advanced the commercialization of architectural windows.

Sustainable All-Day Thermoelectric Power Generation From the Hot Sun and Cold Universe.

Energy conversion from the environment into electricity is the most direct and effective electricity source to sustainably power off-grid electronics, once the electricity requirement exceeds the capability of traditional centralized power supply systems. Normally photovoltaic cells have enabled distributed power generation during the day, but do not work at night. Thus, efficient electricity generation technologies for a sustainable all-day power supply with no necessity for energy storage remain a challenge. Herein, an innovative all-day power generation strategy is reported, which self-adaptively integrates the diurnal photothermal and nocturnal radiative cooling processes into the thermoelectric generator (TEG) via the spectrally dynamic modulated coating, to continuously harvest the energy from the hot sun and the cold universe for power generation. Synergistic with the optimized latent heat phase change material, the electricity generation performance of the TEG is dramatically enhanced, with a maximum power density exceeding 1000 mW m-2 during the daytime and up to 25 mW m-2 during the nighttime, corresponding to an improvement of 123.1% and 249.1%, compared with the conventional strategy. This work maximizes the utilization of ambient energy resources to provide an environmentally friendly and uninterrupted power generation strategy. This opens up new possibilities for sustained power generation both daytime and nighttime.

A Versatile Strategy for Concurrent Passive Daytime Radiative Cooling and Sustainable Energy Harvesting.

Developing versatile systems that can concurrently achieve energy saving and energy generation is critical to accelerate carbon neutrality. However, challenges on designing highly effective, large scale, and multifunctional photonic film hinder the concurrent combination of passive daytime radiative cooling (PDRC) and utilization of sustainable clean energies. Herein, a versatile scalable photonic film (Ecoflex@h-BN) with washable property and excellent mechanical stability is developed by combining the excellent scattering efficiency of the hexagonal boron nitride (h-BN) nanoplates with the high infrared emissivity and ideal triboelectric negative property of the Ecoflex matrix. Strikingly, sufficiently high solar reflectance (0.92) and ideal emissivity (0.97) endow the Ecoflex@h-BN film with subambient cooling effect of ≈9.5 °C at midday during the continuous outdoor measurements. In addition, the PDRC Ecoflex@h-BN film-based triboelectric nanogenerator (PDRC-TENG) exhibits a maximum peak power density of 0.5 W m-2 . By reasonable structure design, the PDRC-TENG accomplishes effective wind energy harvesting and can successfully drive the electronic device. Meanwhile, an on-skin PDRC-TENG is fabricated to harvest human motion energy and monitor moving states. This research provides a novel design of a multifunctional PDRC photonic film, and offers a versatile strategy to realize concurrent PDRC and sustainable energies harvesting.

High Efficiency Breathable Thermoelectric Skin Using Multimode Radiative Cooling/Solar Heating Assisted Large Thermal Gradient.

This study proposes a Janus structure-based stretchable and breathable thermoelectric skin with radiative cooling (RC) and solar heating (SH) functionalities for sustainable energy harvesting. The challenge of the wearable thermoelectric generator arises from the small temperature difference. Thus, this dual-sided structure maximizes the thermal gradient between the body and the surrounding environment, unlike the previous works that rather concentrate on the efficiency of the thermoelectric generator itself. The Janus structure allows the device to switch to the other mode, optimizing electricity generation from a given weather condition. For these functionalities, for the first time, boron nitride-polydimethylsiloxane (BP) and graphene nanoplatelet-polydimethylsiloxane (GP) nanofiber (NF) are developed as substrates. The BP NF generates the RC capability of ΔTcooling  = 4 °C, and the high solar absorbance of the GP NF enables it to be photothermally heated. The flip-overable thermoelectric skin (FoTES) achieves a maximum power output (Pmax ) of 5.73 µW cm-2 in RC mode, surpassing SH mode by 5.55 µW cm-2 in the morning. In the afternoon, it generates a Pmax of 18.59 µW cm-2 in SH mode, outperforming RC mode by 15.56 µW cm-2 . This work contributes to the advancement of wearable electronics, offering a sustainable power source in a wearable form.

A High-Performance Passive Radiative Cooling Metafabric with Janus Wettability and Thermal Conduction.

With the development of industry and global warming, passive radiative cooling textiles have recently drawn great interest owing to saving energy consumption and preventing heat-related illnesses. Nevertheless, existing cooling textiles often lack efficient sweat management capacity and wearable comfort under many practical conditions. Herein, a hierarchical cooling metafabric that integrates passive radiation, thermal conduction, sweat evaporation, and excellent wearable comfort is reported through an electrospinning strategy. The metafabric presents excellent solar reflectivity (99.7%, 0.3-2.5 µm) and selective infrared radiation (92.4%, 8-13 µm), given that the unique optical nature of materials and wettability gradient/micro-nano hierarchical structure design. The strong moisture-wicking effect (water vapor transmission (WVT) of 2985 g m-2 d-1 and directional water transport index (R) of 1029.8%) and high heat-conduction capacity can synergistically enhance the radiative cooling efficiency of the metafabric. The outdoor experiment reveals that the metafabric can obtain cooling temperatures of 13.8 °C and 19.3 °C in the dry and sweating state, respectively. Meanwhile, the metafabric saves ≈19.3% of annual energy consumption compared with the buildings with HAVC systems in Shanghai. The metafabric also demonstrates desirable breathability, mechanical strength, and washability. The cost-effective and high-performance metafabric may offer a novel avenue for developing next-generation personal cooling textiles.

A Novel Multifunctional Photonic Film for Colored Passive Daytime Radiative Cooling and Energy Harvesting.

Passive daytime radiative cooling (PDRC) materials with sustainable energy harvesting capability is critical to concurrently reduce traditional cooling energy utilized for thermal comfort and transfer natural clean energies into electricity. Herein, a versatile photonic film (Ecoflex@BTO@UAFL) based on a novel fluorescent luminescence color passive radiative cooling with triboelectric and piezoelectric effect is developed by filling the dielectric BaTiO3 (BTO) nanoparticles and ultraviolet absorption fluorescent luminescence (UAFL) powder into the elastic Ecoflex matrix. Test results demonstrate that the Ecoflex@BTO@UAFL photonic film exhibits a maximum passive radiative cooling effect of ∽10.1 °C in the daytime. Meanwhile, its average temperature drop in the daytime is ~4.48 °C, which is 0.91 °C higher than that of the Ecoflex@BTO photonic film (3.56 °C) due to the addition of UAFL material. Owing to the high dielectric constant and piezoelectric effect of BTO nanoparticles, the maximum power density (0.53 W m-2, 1 Hz @ 10 N) of the Ecoflex@BTO photonic film-based hybrid nanogenerator is promoted by 70.9% compared to the Ecoflex film-based TENG. This work provides an ingenious strategy for combining PDRC effects with triboelectric and piezoelectric properties, which can spontaneously achieve thermal comfort and energy conservation, offering a new insight into multifunctional energy saving.

Anti-UV Passive Radiative Cooling Chiral Nematic Liquid Crystal Films for Thermal Management.

Passive radiative cooling (PRC) can spontaneously dissipate heat to outer space through atmospheric transparent windows, providing a promising path to meet sustainable development goals. However, achieving simultaneously high transparency, color-customizable, and thermal management of PRC anti ultraviolet (anti-UV) films remains a challenge. Herein, a simple strategy is proposed to utilize liquid crystalline polymer, with high mid-infrared emissive, forming customizable structural color film by molecular self-assembly and polymerization-induced pitch gradient, which guarantees the balance of transparency in visible spectrum and sunlight reflection, rendering anti-UV colored window for thermal management. By performing tests, temperature fall of 5.4 and 7.9 °C are demonstrated at noon with solar intensity of 717 W m-2 and night, respectively. Vivid red-, green-, blue-structured colors, and colorless films are designed and implemented to suppress the solar input and control the effective visible light transmissivity considering the efficiency function of human vision. In addition, temperature rise of 11.1 °C is achieved by applying an alternating current field on the PRC film. This study provides a new perspective on the thermal management and aesthetic functionalities of smart windows and wearables.

Thermochromic Vanadium Dioxide Nanostructures for Smart Windows and Radiative Cooling.

The pursuit of energy-saving materials and technologies has garnered significant attention for their pivotal role in mitigating both energy consumption and carbon emissions. In particular, thermochromic windows in buildings offer energy-saving potential by adjusting the transmittance of solar irradiation in response to temperature changes. Radiative cooling (RC), radiating thermal heat from an object surface to the cold outer space, also offers a potential way for cooling without energy consumption. Accordingly, smart window and RC technologies based on thermochromic materials can play a crucial role in improving energy efficiency and reducing energy consumption in buildings in response to the surrounding temperature. Vanadium dioxide (VO2) is a promising thermochromic material for energy-saving smart windows and RC due to its reversible metal-to-insulator transition, accompanying large changes in its optical properties. This review provides a brief summary of synthesis methods of VO2 nanostructures based on nanoparticles and thin films. Moreover, this review emphasizes and summarizes modulation strategies focusing on doping, thermal processing, and structure manipulation to improve and regulate the thermochromic and emissivity performance of VO2 for smart window and RC applications. In last, the challenges and recent advances of VO2-based smart window and RC applications are briefly presented.

Vapor condensation with daytime radiative cooling.

A radiative vapor condenser sheds heat in the form of infrared radiation and cools itself to below the ambient air temperature to produce liquid water from vapor. This effect has been known for centuries, and is exploited by some insects to survive in dry deserts. Humans have also been using radiative condensation for dew collection. However, all existing radiative vapor condensers must operate during the nighttime. Here, we develop daytime radiative condensers that continue to operate 24 h a day. These daytime radiative condensers can produce water from vapor under direct sunlight, without active consumption of energy. Combined with traditional passive cooling via convection and conduction, radiative cooling can substantially increase the performance of passive vapor condensation, which can be used for passive water extraction and purification technologies.

"Warm in Winter and Cool in Summer": Scalable Biochameleon Inspired Temperature-Adaptive Coating with Easy Preparation and Construction.

The highly reflective solar radiation of passive daytime radiative cooling (PDRC) increases heating energy consumption in the cold winter. Inspired by the temperature-adaptive skin color of chameleon, we efficiently combine temperature-adaptive solar absorption and PDRC technology to achieve "warm in winter and cool in summer". The temperature-adaptive radiative cooling coating (TARCC) with color variability is designed and fabricated, achieving 41% visible light regulation capability. Comprehensive seasonal outdoor tests confirm the reliability of the TARCC: in summer, the TARCC exhibits high solar reflectance (∼93%) and atmospheric transmission window emittance (∼94%), resulting in a 6.5 K subambient temperature. In the winter, the TARCC's dark color strongly absorbs solar radiation, resulting in a 4.3 K temperature rise. Compared with PDRC coatings, the TARCC can save up to 20% of annual energy in midlatitude regions and increase suitable human hours by 55%. With its low cost, easy preparation, and simple construction, the TARCC shows promise for achieving sustainable and comfortable indoor environments.