Topology, dynamics, and control of a muscle-architected soft arm.

Muscular hydrostats, such as octopus arms or elephant trunks, lack bones entirely, endowing them with exceptional dexterity and reconfigurability. Key to their unmatched ability to control nearly infinite degrees of freedom is the architecture into which muscle fibers are weaved. Their arrangement is, effectively, the instantiation of a sophisticated mechanical program that mediates, and likely facilitates, the control and realization of complex, dynamic morphological reconfigurations. Here, by combining medical imaging, biomechanical data, live behavioral experiments, and numerical simulations, an octopus-inspired arm made of [Formula: see text]200 continuous muscle groups is synthesized, exposing "mechanically intelligent" design and control principles broadly pertinent to dynamics and robotics. Such principles are mathematically understood in terms of storage, transport, and conversion of topological quantities, effected into complex 3D motions via simple muscle activation templates. These are in turn composed into higher-level control strategies that, compounded by the arm's compliance, are demonstrated across challenging manipulation tasks, revealing surprising simplicity and robustness.

Three-atom-wide gold quantum rods with periodic elongation and strongly polarized excitons.

Atomically precise control over anisotropic nanoclusters constitutes a grand challenge in nanoscience. In this work, we report our success in achieving a periodic series of atomically precise gold quantum rods (abbrev. Au QRs) with unusual excitonic properties. These QRs possess hexagonal close-packed kernels with a constant three-atom diameter but increasing aspect ratios (ARs) from 6.3 to 18.7, all being protected by the same thiolate (SR) ligand. The kernels of the QRs are in a Au1-(Au3)n-Au1 configuration (where n is the number of Au3 layers) and follow a periodic elongation with a uniform Au18(SR)12 increment consisting of four Au3 layers. These Au QRs possess distinct HOMO-LUMO gaps (Eg = 0.6 to 1.3 eV) and exhibit strongly polarized excitonic transition along the longitudinal direction, resulting in very intense absorption in the near-infrared (800 to 1,700 nm). While excitons in gapped systems and plasmons in gapless systems are distinctly different types of excitations, the strongly polarized excitons in Au QRs surprisingly exhibit plasmon-like behaviors manifested in the shape-induced polarization, very intense absorption (~106 M-1 cm-1), and linear scaling relations with the AR, all of which resemble the behaviors of conventional metallic-state Au nanorods (i.e., gapless systems), but the QRs possess distinct gaps and very long excited-state lifetimes (10 to 2,122 ns), which hold promise in applications such as near-infrared solar energy utilization, hot carrier generation and transfer. The observation of plasmon-like behaviors from single-electron transitions in Au QRs elegantly bridges the distinct realms of single-electron and collective-electron excitations and may stimulate more research on excitonics and plasmonics.

Establishing finite element model credibility of a pedicle screw system under compression-bending: An end-to-end example of the ASME V&V 40 standard.

Computational modeling and simulation (CM&S) is a key tool in medical device design, development, and regulatory approval. For example, finite element analysis (FEA) is widely used to understand the mechanical integrity and durability of orthopaedic implants. The ASME V&V 40 standard and supporting FDA guidance provide a framework for establishing model credibility, enabling deeper reliance on CM&S throughout the total product lifecycle. Examples of how to apply the principles outlined in the ASME V&V 40 standard are important to facilitating greater adoption by the medical device community, but few published examples are available that demonstrate best practices. Therefore, this paper outlines an end-to-end (E2E) example of the ASME V&V 40 standard applied to an orthopaedic implant. The objective of this study was to illustrate how to establish the credibility of a computational model intended for use as part of regulatory evaluation. In particular, this study focused on whether a design change to a spinal pedicle screw construct (specifically, the addition of a cannulation to an existing non-cannulated pedicle screw) would compromise the rod-screw construct mechanical performance. This question of interest (?OI) was addressed by establishing model credibility requirements according to the ASME V&V 40 standard. Experimental testing to support model validation was performed using spinal rods and non-cannulated pedicle screw constructs made with medical grade titanium (Ti-6Al-4V ELI). FEA replicating the experimental tests was performed by three independent modelers and validated through comparisons of common mechanical properties such as stiffness and yield force. The validated model was then used to simulate F1717 compression-bending testing on the new cannulated pedicle screw design to answer the ?OI, without performing any additional experimental testing. This E2E example provides a realistic scenario for the application of the ASME V&V 40 standard to orthopedic medical device applications.

The evolutionary history and spectral tuning of vertebrate visual opsins.

Many animals depend on the sense of vision for survival. In eumetazoans, vision requires specialized, light-sensitive cells called photoreceptors. Light reaches the photoreceptors and triggers the excitation of light-detecting proteins called opsins. Here, we describe the story of visual opsin evolution from the ancestral bilaterian to the extant vertebrate lineages. We explain the mechanisms determining color vision of extant vertebrates, focusing on opsin gene losses, duplications, and the expression regulation of vertebrate opsins. We describe the sequence variation both within and between species that has tweaked the sensitivities of opsin proteins towards different wavelengths of light. We provide an extensive resource of wavelength sensitivities and mutations that have diverged light sensitivity in many vertebrate species and predict how these mutations were accumulated in each lineage based on parsimony. We suggest possible natural and sexual selection mechanisms underlying these spectral differences. Understanding how molecular changes allow for functional adaptation of animals to different environments is a major goal in the field, and therefore identifying mutations affecting vision and their relationship to photic selection pressures is imperative. The goal of this review is to provide a comprehensive overview of our current understanding of opsin evolution in vertebrates.

Bioenergetic and excitotoxic determinants of cofilactin rod formation.

Cofilactin rods (CARs), which are 1:1 aggregates of cofilin-1 and actin, lead to neurite loss in ischemic stroke and other disorders. The biochemical pathways driving CAR formation are well-established, but how these pathways are engaged under ischemic conditions is less clear. Brain ischemia produces both ATP depletion and glutamate excitotoxicity, both of which have been shown to drive CAR formation in other settings. Here, we show that CARs are formed in cultured neurons exposed to ischemia-like conditions: oxygen-glucose deprivation (OGD), glutamate, or oxidative stress. Of these conditions, only OGD produced significant ATP depletion, showing that ATP depletion is not required for CAR formation. Moreover, the OGD-induced CAR formation was blocked by the glutamate receptor antagonists MK-801 and kynurenic acid; the nicotinamide adenine dinucleotide phosphate (NADPH) oxidase inhibitors GSK2795039 and apocynin; as well as an ROS scavenger. The findings identify a biochemical pathway leading from OGD to CAR formation in which the glutamate release induced by energy failure leads to activation of neuronal glutamate receptors, which in turn activates NADPH oxidase to generate oxidative stress and CARs.

Soft and Deformable Thermoresponsive Hollow Rod-Shaped Microgels.

Depending on their aspect ratio, rod-shaped particles exhibit a much richer 2D and 3D phase behavior than their spherical counterparts, with additional nematic and smectic phases accompanied by defined orientational ordering. While the phase diagram of colloidal hard rods is extensively explored, little is known about the influence of softness in such systems, partly due to the absence of appropriate model systems. Additionally, investigating higher volume fractions for long rods is usually complicated because non-equilibrium dynamical arrest is likely to precede the formation of more defined states. This has motivated us to develop micrometric rod-like microgels with limited sedimentation that can respond to temperature and reversibly reorganize into defined phases via annealing and seeding procedures. A detailed procedure is presented for synthesizing rod-shaped hollow poly(N-isopropylacrylamide) microgels using micrometric silica rods as sacrificial templates. Their morphological characterization is conducted through a combination of microscopy and light scattering techniques, evidencing the unconstrained swelling of rod-shaped hollow microgels compared to core-shell microgel rods. Different aspects of their assembly in dispersion and at interfaces are further tested to illustrate the opportunities and challenges offered by such systems that combine softness, anisotropy, and thermoresponsivity.

Robust, Narrow-Band Nanorods LEDs with Luminous Efficacy > 200 lm/W: Next-Generation of Efficient Solid-State Lighting.

Energy-efficient white light-emitting diodes (LEDs) are in high demand across the society. Despite the significant advancements in the modern lighting industry based on solid-state electronics and inorganic phosphor, solid-state lighting (SSL) continues to pursue improved efficiency, saturated color performance, and longer lifetime. Here in this article, robust, narrow emission band nanorods (NRs) are disclosed with tailored wavelengths, aiming to enhance the color rendering index (CRI) and luminous efficacy (LE). The fabricated lighting device consists of NRs of configuration CdSe/ZnxCd1-xS/ZnS, which can independently tune CRI R1-R9 values and maximize the luminous efficacy. For general lighting, NRs with quantum yield (QY) up to 96% and 99% are developed, resulting in ultra-efficient LEDs reaching a record high luminous efficacy of 214 lm W-1 (certified by the National Accreditation Service). Furthermore, NRs are deployed onto mid-power (0.3 W@ 50 mA) LEDs, showing significantly enhanced long-term stability (T95 = 400 h @ 50 mA). With these astonishing properties, the proposed NRs can pave the way for efficient lighting with desired optical spectrum.

Modeling autosomal dominant retinitis pigmentosa by using patient-specific retinal organoids with a class-3 RHO mutation.

Rhodopsin-mediated autosomal dominant retinitis pigmentosa (RHO-adRP) causes progressive vision loss and is potentially incurable, accounting for 25% of adRP cases. Studies on RHO-adRP mechanism were at large based on the biochemical and cellular properties, especially class-3. Nonetheless, the absence of an appropriate model for class-3 RHO-adRP has impeded comprehensive exploration. Here, induced pluripotent stem cells (iPSCs) were generated from a healthy control and two sibling RP patients with the same point mutation, c.403C>T (p.R135W). The first three-dimensional (3D) retinal organoid model of a class-3 RHO point mutation from patient-derived iPSCs was generated. Significant defects were observed in rod photoreceptors in terms of localization, morphology, transcriptional profiling and single cell resolution, to better understand the human disease resulting from RHO mutations from a developmental perspective. This first human model of class-3 RHO-adRP provides a representation of patient's retina in vitro and displays features of RHO-adRP retinal organoids relevant for therapeutic development.

Spatially-dependent model for rods and cones in the retina.

We develop a mathematical model for photoreceptors in the retina. We focus on rod and cone outer segment dynamics and interactions with a nutrient source associated with the retinal pigment epithelium cells. Rod and cone densities (number per unit area of retinal surface) are known to have significant spatial dependence in the retina with cones located primarily near the fovea and the rods located primarily away from the fovea. Our model accounts for this spatial dependence of the rod and cone photoreceptor density as well as for the possibility of nutrient diffusion. We present equilibrium and dynamic solutions, discuss their relation to existing models, and estimate model parameters through comparisons with available experimental measurements of both spatial and temporal photoreceptor characteristics. Our model compares well with existing data on spatially-dependent regrowth of photoreceptor outer segments in the macular region of Rhesus Monkeys. Our predictions are also consistent with existing data on the spatial dependence of photoreceptor outer segment length near the fovea in healthy human subjects. We focus primarily on the healthy eye but our model could be the basis for future efforts designed to explore various retinal pathologies, eye-related injuries, and treatments of these conditions.

Brooklawnia propionicigenes sp. nov., a facultatively anaerobic, propionate-producing bacterium isolated from a methanogenic reactor treating waste from cattle farms.

Facultatively anaerobic bacterial strains were isolated from samples of a methanogenic reactor and, based on 16S rRNA gene sequences, found to be affiliated with the family Propionibacteriaceae in the phylum Actinomycetota. Four strains with almost-identical 16S rRNA gene sequences were comprehensively characterized. The most closely related species to the strains was Brooklawnia cerclae BL-34T (96.4 % sequence similarity). Although most of the phenotypic characteristics of the four strains were identical, distinct differences in some cellular and physiological properties were also detected. Cells of the strains were Gram-stain-positive, non-spore-forming, pleomorphic rods. The strains utilized carbohydrates and organic acids. The strains produced acetate, propionate and lactate from glucose, but the molar ratios of the products were variable depending on the strains. The strains grew at 10-40 °C (optimum at 35 °C) and pH 5.3-8.8 (optimum at pH 6.8-7.5.) The major cellular fatty acids of the strains were anteiso-C15 : 0, C15 : 0 and C15 : 0 dimethylacetal (as a summed feature). The major respiratory quinone was menaquinone MK-9(H4) and the diagnostic diamino acid in the peptidoglycan was meso-diaminopimelic acid. The genome size of the type strain (SH051T) was 3.21 Mb and the genome DNA G+C content was 65.7 mol%. Genes responsible for propionate production through the Wood-Werkman pathway were detected in the genome of strain SH051T. Based on the results of phylogenetic, genomic and phenotypic analyses of the novel strains, the name Brooklawnia propionicigenes sp. nov. is proposed to accommodate the four strains. The type strain of the novel species is SH051T (=NBRC 116195T=DSM 116141T).

Age-dependencies of the electroretinogram in healthy subjects.

OBJECTIVE: The purpose of this study was to evaluate the age-dependency of amplitudes and implicit times in the electroretinograms (ERGs) of healthy individuals and provide clinicians and researchers with a reference for a variety of stimulus paradigms. DESIGN AND METHODS: Full-field electroretinography was conducted on 73 healthy participants aged 14-73 using an extended ISCEV standard protocol that included an additional 9 Hz flicker stimulus for assessing rod function and special paradigms for isolated On-Off and S-cone responses. Correlation coefficients and best-fit regression models for each parameter's age-dependency were calculated. RESULTS: Dark-adapted ERGs, in particular, displayed notable age-related alterations. The attenuation and delay of the b-wave with higher age were most significant in the dark-adapted, rod-driven 0.001 cd s/m2 flash ERG. The age-dependent reduction of the a-wave amplitude was strongest in the standard dark-adapted 3 cd s/m2 flash condition. Cone-driven, light-adapted responses to either flash or flicker stimuli displayed comparatively small alterations at higher age. S-cone function tended to diminish at an early age, but the effect was not significant in the whole population. CONCLUSION: The results suggest that rod and cone function decline at different rates with age, with rods being generally more affected by aging. Nonetheless, response amplitudes displayed a wide variability across the whole sample.

Sling for the sling: a new technique for long-term correction of severe congenital ptosis.

INTRODUCTION: Severe congenital ptosis poses a complex challenge for oculoplastic surgeons, requiring meticulous surgical intervention to restore eyelid function and improve aesthetic outcomes mainly by using frontalis sling approach. A crucial issue in frontalis sling surgeries is the sustainability of effect. PURPOSE: This retrospective study reports the outcomes of two surgical techniques for treating severe congenital ptosis in the paediatric age group: Silicon rods ptosis sling and a novel technique involving the use of Silicon rods with green braided polyester (Ethibond) sutures to secure the rods in place "sling for the sling". METHODS: The medical records of children who underwent frontalis suspension were reviewed in a retrospective fashion. We identified two groups; the first group (20 patients: 35 eyelids) had the traditional frontalis suspension surgery using silicone suspension set, the second group (14 patients: 25 eyelids) was operated using the new "sling for sling" technique. We used the postoperative marginal reflex distance-1 (MRD-1) as the primary outcome measure while the frequency of both wound related complications and recurrence were considered as secondary outcome measures. Post operative data were collected and compared after 1 month, 6 months, 12 months, and 18 months. RESULTS: Preliminary results indicate promising outcomes for both techniques, with significant improvement in eyelid elevation observed in both groups. However, the novel technique using Silicon rods with Ethibond sutures demonstrated enhanced sustainability, leading to a more durable outcome with significantly less recurrence. CONCLUSION: This study highlights the potential benefits of the novel technique in treating severe congenital ptosis and introduces an innovative approach to Silicone rods fixation to achieve a long-term corrective effect.

Clinical features and surgical treatments of scoliosis in neurofibromatosis type 1: a systemic review and meta-analysis.

BACKGROUND: Neurofibromatosis type 1 (NF 1) is an autosomal-dominant tumor predisposition genetic disease affecting approximately 1 in 3000 live births. The condition could present various manifestations ranging from skin abnormalities to neurological tumors. The musculoskeletal system could also be frequently affected, and scoliosis is the most common orthopedic manifestation. Characterized by the early-onset and rapid progression tendency, NF 1-related dystrophic scoliosis presented discrepancies from idiopathic scoliosis in terms of natural history, clinical features, and management outcomes and thus required special attention. In the current study, the authors conducted a systemic review to outline the body of evidence of the natural history, clinical characteristics, surgical outcomes, and surgical complications of NF 1-induced scoliosis, aiming to provide an elucidative insight into this condition. METHOD: Systemic review and meta-analysis were conducted according to the latest Preferred Reporting Items for Systematic Reviews Meta-Analyses (PRISMA) guidelines. The search was performed in Medline, Embase, and Web of Science Core Collection up to December 27, 2022, using related keywords. Clinical features such as frequencies, segmental involvement, and hereditary information were summarized and described qualitatively. Meta-analysis was conducted using R software and the 'meta' package to yield an overall outcome of efficacy and safety of surgical management, precisely, spinal fusion procedure and growing rods procedure. Corrective rate of Cobb angle, sagittal kyphosis angle, and T1-S1 length post-operative and at the last follow-up was used to evaluate the efficacy, and the occurrence of surgery-related complications was used to evaluate the safety. RESULT: A total of 37 articles involving 1023 patients were included. Approximately 26.6% of the NF 1 patients would present with scoliosis. Patients tend to develop scoliosis at an earlier age. The thoracic part turned out to be the most affected segment. No obvious correlation between scoliosis and genotype or hereditary type was observed. Both spinal fusion and growing rod surgery have shown acceptable treatment outcomes, with spinal fusion demonstrating better performance in terms of effectiveness and safety. The growing rods technique seemed to allow a better lengthening of the spine. The mainstay post-operative complications were implant-related complications but could be managed with limited revision surgery. Severe neurological deficits were rarely reported. CONCLUSION: Scoliosis, especially the subtype characterized by dystrophic bony changes, is a significant orthopedic manifestation of NF1. It has an early onset, a tendency to persistently and rapidly progress, and is challenging to deal with. The current review outlines the available evidence from the perspective of natural history, clinical features, and the treatment efficacy and safety of the mainstay surgical options. Patients with NF1 scoliosis will benefit from a better understanding of the disease and evidence based treatment strategies.

Comparison of traditional growth rods and magnetically controlled growing rods in early-onset scoliosis: a case-matched mid term follow-up study.

PURPOSE: Early-onset scoliosis (EOS) has always been a challenging situation for spine surgeons. The aim of treatment is to control the direction of curve progression to allow for the complete development of lungs. Among all the growth constructs available, traditional growth rods (TGR) and magnetically controlled growth rods (MCGR) are most widely used. The MCGR has been introduced a few years back and there is a dearth of long-term follow-up studies. The purpose of this study is to compare the effectiveness of TGR and MCGR for the treatment of EOS. METHODS: All patients of EOS managed with either TGR or MCGR were included in the study. The patients managed with other methods or having follow-up < 2-years were excluded from the study. A total of 20 patients were recruited in the MCGR group and 28 patients were recruited in the TGR group. Both groups were matched by etiology, gender, pre-operative radiological parameters, and complications including unplanned surgeries. RESULTS: The mean age in our study was 7.90 years in the MCGR group and 7.46 years in the TGR group. The mean duration of follow-up in the MCGR group was 50.89 months and in the TGR group 94.2 months. Pre-operative cobb's angle in the coronal plane and T1-S1 were comparable in both groups with a mean cobb's angle of 65.4 in MCGR and 70.5 in TGR. The mean T1-S1 length in the MCGR group was 36.1cms and in the TGR group was 35.2 cms (p = 0.18). The average increase in T1-S1 length was 1.3 cm/year in the TGR group and 1.1 cm/year in the MCGR group (p > 0.05). The TGR patients underwent 186 open lengthening surgeries and 11 unplanned surgeries for various complications. The MCGR group has 180 non-invasive lengthening with only 4 unplanned returns to OT for various causes. CONCLUSION: The curve correction was similar in both TGR and MCGR groups. The average T1-S1 length achieved on final follow-up was similar in both groups. The MCGR patients have attained similar correction with fewer invasive procedures and lesser complications compared to the TGR group.

Mechanics of two filaments in tight orthogonal contact.

Networks of flexible filaments often involve regions of tight contact. Predictively understanding the equilibrium configurations of these systems is challenging due to intricate couplings between topology, geometry, large nonlinear deformations, and friction. Here, we perform an in-depth study of a simple, yet canonical, problem that captures the essence of contact between filaments. In the orthogonal clasp, two filaments are brought into contact, with each centerline lying in one of a pair of orthogonal planes. Our data from X-ray tomography (µCT) and mechanical testing experiments are in excellent agreement with finite element method (FEM) simulations. Despite the apparent simplicity of the physical system, the data exhibit strikingly unintuitive behavior, even when the contact is frictionless. Specifically, we observe a curvilinear diamond-shaped ridge in the contact-pressure field between the two filaments, sometimes with an inner gap. When a relative displacement is imposed between the filaments, friction is activated, and a highly asymmetric pressure field develops. These findings contrast to the classic capstan analysis of a single filament wrapped around a rigid body. Both the µCT and FEM data indicate that the cross-sections of the filaments can deform significantly. Nonetheless, an idealized geometrical theory assuming undeformable tube cross-sections and neglecting elasticity rationalizes our observations qualitatively and highlights the central role of the small, but nonzero, tube radius of the filaments. We believe that our orthogonal clasp analysis provides a building block for future modeling efforts in frictional contact mechanics of more complex filamentary structures.

Pattern formation and polarity sorting of driven actin filaments on lipid membranes.

Collective motion of active matter is ubiquitously observed, ranging from propelled colloids to flocks of bird, and often features the formation of complex structures composed of agents moving coherently. However, it remains extremely challenging to predict emergent patterns from the binary interaction between agents, especially as only a limited number of interaction regimes have been experimentally observed so far. Here, we introduce an actin gliding assay coupled to a supported lipid bilayer, whose fluidity forces the interaction between self-propelled filaments to be dominated by steric repulsion. This results in filaments stopping upon binary collisions and eventually aligning nematically. Such a binary interaction rule results at high densities in the emergence of dynamic collectively moving structures including clusters, vortices, and streams of filaments. Despite the microscopic interaction having a nematic symmetry, the emergent structures are found to be polar, with filaments collectively moving in the same direction. This is due to polar biases introduced by the stopping upon collision, both on the individual filaments scale as well as on the scale of collective structures. In this context, positive half-charged topological defects turn out to be a most efficient trapping and polarity sorting conformation.

Retrieval analysis of PEEK rods pedicle screw system: three cases analysis.

PURPOSE: To analyze the characteristics of PEEK rods retrieved in vivo, specifically their wear and deformation, biodegradability, histocompatibility, and mechanical properties. METHOD: Six PEEK rods were retrieved from revision surgeries along with periprosthetic tissue. The retrieved PEEK rods were evaluated for surface damage and internal changes using Micro-CT, while light and electron microscopy were utilized to determine any histological changes in periprosthetic tissues. Patient history was gathered from medical records. Two intact and retrieved PEEK rods were used for fatigue testing analysis by sinusoidal load to the spinal construct. RESULTS: All implants showed evidence of plastic deformation around the screw-rod interface, while the inner structure of PEEK rods appeared unchanged with no visible voids or cracks. Examining images captured through light and electron microscopy indicated that phagocytosis of macrophages around PEEK rods was less severe in comparison to the screw-rod interface. The results of an energy spectrum analysis suggested that the distribution of tissue elements around PEEK rods did not differ significantly from normal tissue. During fatigue testing, it was found that the retrieved PEEK rods cracked after 1.36 million tests, whereas the intact PEEK rods completed 5 million fatigue tests without any failure. CONCLUSION: PEEK rods demonstrate satisfactory biocompatibility, corrosion resistance, chemical stability, and mechanical properties. Nevertheless, it is observed that the indentation at the junction between the nut and the rod exhibits relatively weak strength, making it susceptible to breakage. As a precautionary measure, it is recommended to secure the nut with a counter wrench, applying the preset torque to prevent overtightening.

Instrumentation failure following pediatric spine deformity growth-sparing surgery using traditional growing rods or vertical expandable prosthetic titanium ribs.

BACKGROUND: Instrumentation failure (IF) is a major complication associated with growth-sparing surgery for pediatric spinal deformities; however, studies focusing on IF following each surgical procedure are lacking. We aimed to evaluate the incidence, timing, and rates of unplanned return to the operating room (UPROR) associated with IF following each surgical procedure in growth-sparing surgeries using traditional growing rods (TGRs) and vertical expandable prosthetic titanium ribs (VEPTRs). METHODS: We reviewed 1,139 surgical procedures documented in a Japanese multicenter database from 2015 to 2017. Of these, 544 TGR and 455 VEPTR procedures were included for evaluation on a per-surgery basis. IF was defined as the occurrence of an implant-related complication requiring revision surgery. RESULTS: The surgery-based incidences of IF requiring revision surgery in the TGR and VEPTR groups were 4.3% and 4.0%, respectively, with no significant intergroup difference. Remarkably, there was a negative correlation between IF incidence per surgical procedure and the number of lengthening surgeries in both groups. In addition, rod breakage in the TGR group and anchor-related complications in the VEPTR group tended to occur relatively early in the treatment course. The surgery-based rates of UPROR due to IF in the TGR and VEPTR groups were 2.0% and 1.5%, respectively, showing no statistically significant difference. CONCLUSIONS: We found that IF, such as anchor related-complications and rod breakage, occurs more frequently earlier in the course of lengthening surgeries. This finding may help in patient counseling and highlights the importance of close postoperative follow-up to detect IF and improve outcomes.

Porous α-Fe2O3 Hollow Rods/Reduced Graphene Oxide Composites Templated by MoO3 Nanobelts for High-Performance Supercapacitor Applications.

Porous α-Fe2O3 hollow rods/reduced graphene oxide (α-Fe2O3 HR/RGO) composites with unique morphological characteristics and a high surface area are prepared through a template strategy, which was systematically studied and found to have outstanding supercapacitive properties. When served as active material in a three-electrode setup, the optimized α-Fe2O3 HR/RGO-30, comprised 76.5 wt% α-Fe2O3 and 23.2 wt% RGO, was able to offer the largest specific capacitance of 426.3 F g-1, an excellent rate capability as well as satisfactory cycle life with capacitance retention of 87.7% and Coulombic efficiency of 98.9% after continuously charging/discharging at 10 A g-1 for beyond 10,000 cycles. Such electrochemical behaviors of the α-Fe2O3 HR/RGO-30 electrode can rival or even surpass those of many Fe2O3-based electrodes documented in the previous literature. Later, a symmetric supercapacitor cell of α-Fe2O3 HR/RGO-30//α-Fe2O3 HR/RGO-30 was fabricated. The assembled device offers the maximum energy density of 18.7 Wh kg-1, and also exhibits commendable rate capability, and features stable cycling durability (with capacitance retention of 83.2% together with a Coulombic efficiency of 99.3% after 10,000-cycle charge/discharge at 5 A g-1). These notable electrochemical performances enable the α-Fe2O3 HR/RGO-30 composite to be a high-potential material for advanced energy storage systems.

Old Acquaintances and Novel Complex Structures for the Ni(II) and Cu(II) Complexes of bis-Chelate Oxime-Amide Ligands.

In the process of systematically studying the methylhydroxyiminoethaneamide bis-chelate ligands with polymethylene spacers of different lengths, L1-L3, and their transition metal complexes, a number of new Ni(II) and Cu(II) species have been isolated, and their molecular and crystal structures were determined using single-crystal X-ray diffraction. In all of these compounds, the divalent metal is coordinated by the ligand donor atoms in a square-planar arrangement. In addition, a serendipitously discovered new type of neutral Ni(II) complex, where the propane spacer of ligand L2 underwent oxidation to the propene spacer, and one of the amide groups was oxidised to the ketoimine, is also reported. The resulting ligand L2' affords the formation of neutral planar Ni(II) complexes, which are assembled in the solid state on top of each other, and yield two polymorphic structures. In both structures, the resulting infinite, exclusively parallel metal ion columns in ligand insulation may serve as precursor materials for sub-nano-conducting connectors. Overall, this paper reports the synthesis and characterisation of seven new anionic, cationic, and neutral Ni(II) and Cu(II) complexes, their crystal structures, as well as experimental and computed UV-Vis absorption spectra for two structurally similar Ni(II) complexes, yellow and red.