One-Year Outcomes of the Anatomical Front and Back Reconstruction for Scapholunate Dissociation.

PURPOSE: Anatomical front and back (ANAFAB) reconstruction addresses the critical volar and dorsal ligaments associated with scapholunate dissociation. We hypothesized that patients with symptomatic, chronic, late-stage scapholunate dissociation would demonstrate improvements in all radiographic parameters and patient-reported outcomes (PROMs) after ANAFAB reconstruction. METHODS: From 2018 to 2021, 21 ANAFAB reconstructions performed by a single surgeon were followed prospectively, with 20 patients having a minimum follow-up of 12 months. In total, 17 men and four women were included, with an average age of 49 years. Three patients had modified Garcia-Elias stage 3 disease, eight stage 4, seven stage 5, and three stage 7. ANAFAB reconstruction of intrinsic and extrinsic ligament stabilizers was performed using a hybrid synthetic tape/tendon graft in a transosseous reconstruction. Pre- and postoperative radiographic parameters, grip, pinch strength, the Patient-Rated Wrist Evaluation, PROMIS Upper Extremity Function, and PROMIS Pain Interference outcome measures were compared. RESULTS: Mean follow-up was 17.9 months (range: 12-38). Radiographic parameters were improved at follow-up, including the following: scapholunate angle (mean 75.3° preoperatively to 69.2°), scapholunate gap (5.9-4.2 mm), dorsal scaphoid translation (1.2-0.2 mm), and radiolunate angle (13.5° to 1.8°). Mean Patient-Rated Wrist Evaluation scores for pain and function decreased from 40.6 before surgery to 10.4. We were unable to detect a significant difference in grip or pinch strength or radioscaphoid angle with the numbers tested. There were two minor complications, and two complications required re-operations, one patient who was converted to a proximal row carpectomy for failure of fixation, and one who required tenolysis/arthrolysis for arthrofibrosis. CONCLUSIONS: At 17.9-month average follow-up, radiographic and patient-reported outcome parameters improved after reconstruction of the critical dorsal and volar ligament stabilizers of the proximal carpal row with the ANAFAB technique. TYPE OF STUDY/LEVEL OF EVIDENCE: Therapeutic IV.

Comparative Analysis of 3 Techniques of Scapholunate Reconstruction for Dorsal Intercalated Segment Instability.

PURPOSE: The combination of scaphoid rotatory subluxation, dorsal intercalated segment instability, and dorsal scaphoid translation (DST) constitutes stage 5 scapholunate dissociation in the modified classification system of Garcia-Elias. The purpose of this study was to compare the static radiographic outcomes of reduction and association of the scaphoid and lunate (RASL), three-ligament tenodesis (TLT), and anatomic front and back (ANAFAB) reconstructions for stage 5 scaphoid and lunate malrotation and translation. METHODS: Stage 5 scapholunate dissociation was created in 15 fresh-frozen specimens by cutting the scapholunate interosseous ligament, long radiolunate ligament, dorsal intercarpal ligament, and scaphotrapeziotrapezoid ligament complex. Specimens were randomized to receive 1 of the 3 reconstructive techniques. Radiolunate angle (RLA), scapholunate angle, scapholunate gap, and DST were measured in static fluoroscopic posteroanterior and lateral views in 3 conditions: baseline, injured, and reconstructed. RESULTS: Reduction and association of the scaphoid and lunate showed an improved correction of scapholunate gap compared with TLT and ANAFAB. Anatomic front and back demonstrated an improved correction in RLA and scapholunate angle compared with RASL but not TLT. When the reconstruction was compared with baseline, there was a persistent lunate extension for TLT (RLA and scapholunate angle) and RASL (RLA); however, no significant difference in any parameter was found with ANAFAB. Anatomic front and back significantly improved DST, whereas TLT and RASL did not. CONCLUSIONS: In this cadaveric model of scapholunate dissociation with dorsal intercalated segment instability and DST, each of the 3 repairs had different effects on carpal posture and alignment. While only RASL statistically improved scapholunate gap, only ANAFAB significantly improved DST. Both TLT and RASL improved radiographic parameters; however, each had a persistent increase in the lunate extension following reconstruction. CLINICAL RELEVANCE: It may be prudent to consider different reconstructive techniques for different stages of scapholunate instability. Anatomic front and back, a repair that addresses both dorsal and volar ligament stabilizers, provides improved reduction of dorsal intercalated segment instability and DST in stage 5 scapholunate dissociation.

A Biomechanical Evaluation of the ECRL Tenodesis for Reconstruction of the Scapholunate Ligament.

PURPOSE: Reconstruction of the scapholunate ligament (SLL) in the setting of dynamic instability remains a surgical challenge, with lack of consensus on the best reconstructive procedure. Reconstruction of only the dorsal component may lead to volar gapping and abnormal wrist kinematics. This cadaveric active motion simulation study determined whether scapholunate (SL) motion, angulation, and contact are restored following open reconstruction using the extensor carpi radialis longus (ECRL) tenodesis, which reconstructs both the volar and the dorsal SLL components. METHODS: Seven fresh-frozen cadaveric upper limbs (mean age, 68 ± 10.1 years) underwent a 4-stage protocol of cyclic dart-throw motion and flexion-extension motion (utilizing an active wrist motion simulator that used tendon load/motion-controlled actuation. Scaphoid and lunate motion, relative scaphoid translation, SL angle, and dorsal-volar SL diastasis were measured with (1) wrist ligaments intact, (2) following complete sectioning of the SLL, and (3) following SL reconstruction using the ECRL tenodesis technique. RESULTS: Complete SLL sectioning resulted in a typical pattern of SL instability. Following the ECRL tenodesis, lunate extension was not corrected. Scaphoid flexion, however, was not significantly different from the native state in FEM but remained significantly flexed during dart-throw motion. Differential dorsal and volar gapping did not significantly improve following ECRL tenodesis (dorsal, 1.2-2.3 mm; volar, 1.1-1.7 mm). CONCLUSIONS: This biomechanical study demonstrates that the ECRL tenodesis did not fully restore native carpal kinematics, despite dorsal and volar SLL, and scaphotrapeziotrapezoid reconstruction. TYPE OF STUDY/LEVEL OF EVIDENCE: Therapeutic IV.

Force Required to Maintain Reduction of a Preexisting Scapholunate Dissociation.

PURPOSE: To determine the force required to maintain reduction of Geissler grade 4 scapholunate dissociations during physiological wrist motions. METHODS: Fresh-frozen cadaveric wrists with Geissler grade 4 scapholunate dissociations were identified by arthroscopy. Following reduction, a load cell was attached to measure the force across the scapholunate joint at a neutral position and during 4 different wrist motions re-created using a servohydraulic wrist simulator, including a large flexion-extension motion (FEM), small and large dart-thrower's motions (DTMs), and a large DTM with ulnar offset. RESULTS: Five wrists with isolated preexisting scapholunate interosseous ligament (SLIL) tears were analyzed. The force required to maintain reduction was significantly greater in extension than in flexion during the large FEM and large DTM with ulnar offset. The forces were significantly larger in this study of preexisting SLIL dissociations compared with results from a prior study of acutely sectioned SLILs. In addition, forces to maintain reduction during DTMs were significantly less than forces during FEMs. Finally, a set of 3 wrists with preexisting scapholunate and lunotriquetral interosseous ligament (LTIL) tears were identified and had significantly decreased forces to maintain reduction at maximum extension and had decreased maximal forces during a cycle of motion compared with the wrists with isolated SLIL tears. CONCLUSIONS: The forces required to maintain reduction of a Geissler grade 4 wrist are higher than forces after acutely sectioned SLIL. The forces are greater in extension than in flexion and less during the DTM compared with the FEM. Wrists with both SLIL and LTIL tears required less force to maintain reduction than those with isolated SLIL tears. CLINICAL RELEVANCE: This study helps determine the strength of reconstruction required to maintain reduction of a Geissler grade 4 scapholunate dissociation.

Carpal Realignment Using a Strip of Extensor Carpi Radialis Longus Tendon.

Scapholunate instability can lead to posttraumatic dysfunction of the wrist. If unrecognized, it commonly leads to degenerative osteoarthritis. Numerous reparative techniques have been proposed with mixed long-term success. We present a technique that uses a distally based strip of the extensor carpi radialis longus to better maintain reduction of the scaphoid and reconstruct the volar and dorsal scapholunate ligament and the scaphotrapezium-trapezoid ligament. To illustrate the technique, we describe a clinical case with 17 months of follow-up.

Scapholunate instability: why are the surgical outcomes still so far from ideal?

The wrist is a universal joint with intrinsic and extrinsic ligaments that function and fail as ligamentous complexes. Those related to scapholunate instability (SLI) include the dorsal scapholunate complex (DSLC), volar radiolunate complex and scaphotrapeziotrapezoid complex. Together the DSLC, scaphoid and lunate create an 'acetabulum' for the capitate, with the dorsal intercarpal ligament being a labrum to contain the capitate. SLI results from failure of the DSLC, typically from its scaphoid attachments. Failure of the lunate and or triquetral attachments increases the instability. DSLC failure leads to radioscaphoid instability, which is the symptomatic clinical problem. SLI reconstruction with open surgery and trans-osseous tendon graft techniques have been challenging. We discuss a biological arthroscopic approach to identify, mobilize and debride the disrupted DSLC. This ligament/capsular/periosteum sheet is then advanced and secured to the debrided footprint. Thereby reconstituting the acetabulum, labrum and scaphoid stability.

Biomechanical Analysis of Three Different Reconstruction Techniques for Scapholunate Instability: A Cadaveric Study.

Background: This study aimed to compare the biomechanical strength of 360° scapholunate interosseous ligament (SLIL) reconstruction only using an artificial material (AM), double dorsal limb (DDL) SLIL reconstruction only using AM, and the modified Brunelli technique (MBT) with ligament. Methods: Eight cadaver wrists were used for this study. The SL interval, SL angle, and radiolunate (RL) angle were recorded with MicroScribe. The SL distance was measured after dividing the volar and dorsal aspects. We utilized four different wrist postures (neutral, flexion, extension, and clenched fist) to compare five conditions: intact wrist, SLIL resection, 360° SLIL reconstruction using AM, DDL SLIL reconstruction using AM, and MBT SLIL reconstruction with ligament. Results: The dorsal SL distance in the SLIL resection was widened in all wrist positions. The dorsal SL distance was restored with all three techniques and in all wrist positions. The volar SL distance in the wrist extension position was widened in the SLIL resection condition. The volar SL distance was restored in the extension position after 360° SLIL reconstruction using AM condition. There were no statistically significant differences in SL and RL angles among the conditions. Conclusions: All three reconstruction techniques could restore the dorsal SL distance. However, only the 360° SLIL reconstruction using AM restored the volar SL distance in the wrist extension position. DDL SLIL reconstruction using AM tended to overcorrect, whereas 360° SLIL reconstruction using AM effectively stopped volar SL interval widening.

Scapholunate Ligament Internal Brace 360 Tenodesis (SLITT) Procedure: A Biomechanical Study.

Background Twelve paired fresh frozen cadaveric wrists were randomized to a 360-degree tenodesis repair group or the 360-degree tenodesis repair with an internal brace (suture tape) construct. Case Description The specimens were preloaded to 5 N and subsequently biomechanically loaded to failure, at a rate of 0.1 mm/s on a jig that allowed for axial load. The maximum load and mode of failure were recorded. Load to failure in the 360 tenodesis group with internal brace was 283.47 ± 100.25 N, compared with the 360 tenodesis group only, whose yield strength was 143.61 ± 90.54 N. The mode of failure within the internal brace construct was either through knot slippage, graft disruption, or bone separation from strength testing construct. The 360 tenodesis group tended to fail via graft slippage or graft rupture. Literature Review The management of scapholunate instability can be a difficult problem to treat. Traditionally, many of the surgical reconstructions have focused upon dorsal ligament reconstruction with Kirschner (K) wire fixation. This results in prolonged immobilization of the wrist with varied outcomes, in part due to the multiaxial instability that may persist due to concomitant volar ligament disruption. To address this instability, surgical techniques have been devised that address both the volar and dorsal ligament injuries. Clinical Relevance Scapholunate reconstruction with a 360-degree tenodesis and internal brace augmentation (SLITT procedure) provided superior biomechanical stability than tenodesis alone.

Radiographic evaluation of chronic static scapholunate dissociation post soft tissue reconstruction.

The purpose of this study was to examine the radiographic outcomes of dorsal intercarpal ligament capsulodesis (DILC), documenting the time to carpal collapse postoperatively. From January 2008 to January 2011, 12 patients were identified with chronic scapholunate (SL) dissociation. The average follow-up period was 15.8 months. Paired t-tests were used preoperatively, one month after pin removal, and at final follow-up to determine significance in radiographic outcomes. The Disabilities of the Arm, Shoulder, and Hand (DASH) survey was administered to patients before and after surgery to assess subjective levels of pain, function, and satisfaction. Intraoperatively all deformities were reduced completely. One month after pin removal, the mean SL gap was 3.3 mm, the SL angle was 74°, the radiolunate (RL) angle was 17°, and the lunatocapitate (LC) angle was 8°. Only the SL angle improved; the other measurements remained unchanged. At final follow-up, the mean SL gap was 3.6 mm, the SL angle was 78°, the RL angle was 20°, and the LC angle was 10°. SL angle worsened, but with no statistically significant difference. The other radiographic measurements remained unchanged at final follow up. Wrist flexion and extension decreased from 76% and 69% of the contralateral side to 62% and 56% of the contralateral side after surgery. Grip strength was 64% of the contralateral side before surgery and 83% after surgery. Visual Analog Scale (VAS) results improved from 6.3 to 1.7, and DASH scores improved from 39 to 8 after the surgery. DILC cannot withstand large and repetitive forces. Carpal collapse recurred within a short time after DILC. However, our small patient numbers and short term follow-up preclude any conclusions with respect to clinical efficacy of this procedure. Limitations of this study include the fact that this is a retrospective study with no control group. In addition, it represents a single-surgeon series, which introduces a source of bias and carries the risk of technical and methodological flaws, which may have contributed to the observed radiographic outcomes.