Complex Sequence-Defined Heteropolymers Enable Controlled Film Growth in Layer-By-Layer Assembly.

Digitally-encoded poly(phosphodiesters) (d-PPDE) with highly complex primary structures are evaluated for layer-by-layer (LbL) assembly. To be easily decoded by mass spectrometry (MS), these digital polymers contain many different monomers: 2 coding units allowing binary encryption, 1 cleavable spacer allowing controlled MS fragmentation, and 3 mass tags allowing fragment identification. These complex heteropolymers are therefore composed of 6 different motifs. Despite this strong sequence heterogeneity, it is found that they enable a highly controlled LbL film formation. For instance, a regular growth is observed when alternating the deposition of negatively-charged d-PPDE and positively-charged poly(allyl amine hydrochloride) (PAH). Yet, in this approach, the interdistance between consecutive coded d-PPDE layers remains relatively small, which may be an issue for data storage applications, especially for the selective decoding of the stored information. Using poly(sodium 4-styrene sulfonate) (PSS) as an intermediate non-coded polyanion, it is shown that a controlled interdistance between d-PPDE layers can be easily achieved, while still maintaining a regular LbL growth. Last but not least, it is found in this work that d-PPDE of relatively small molecular weight (i.e., significantly smaller than those of PAH and PSS) still enables a controlled LbL assembly.

Macromolecular Information Transfer.

Macromolecular information transfer can be defined as the process by which a coded monomer sequence is communicated from one macromolecule to another. In such a transfer process, the information sequence can be kept identical, transformed into a complementary sequence or even translated into a different molecular language. Such mechanisms are crucial in biology and take place in DNA→DNA replication, DNA→RNA transcription and RNA→protein translation. In fact, there would be no life on Earth without macromolecular information transfer. Mimicking such processes with synthetic macromolecules would also be of major scientific relevance because it would open up new avenues for technological applications (e.g. data storage and processing) but also for the creation of artificial life. In this important context, this minireview summarizes recent research about information transfer in synthetic oligomers and polymers. Medium- and long-term perspectives are also discussed.

Two-Dimensional Supramolecular Polymerization of DNA Amphiphiles is Driven by Sequence-Dependent DNA-Chromophore Interactions.

Two-dimensional (2D) assemblies of water-soluble block copolymers have been limited by a dearth of systematic studies that relate polymer structure to pathway mechanism and supramolecular morphology. Here, we employ sequence-defined triblock DNA amphiphiles for the supramolecular polymerization of free-standing DNA nanosheets in water. Our systematic modulation of amphiphile sequence shows the alkyl chain core forming a cell membrane-like structure and the distal π-stacking chromophore block folding back to interact with the hydrophilic DNA block on the nanosheet surface. This interaction is crucial to sheet formation, marked by a chiral "signature", and sensitive to DNA sequence, where nanosheets form with a mixed sequence, but not with a homogeneous poly(thymine) sequence. This work opens the possibility of forming well-ordered, bilayer-like assemblies using a single DNA amphiphile for applications in cell sensing, nucleic acid therapeutic delivery and enzyme arrays.

Conception and Evaluation of a Library of Cleavable Mass Tags for Digital Polymers Sequencing.

A library of phosphoramidite monomers containing a main-chain cleavable alkoxyamine and a side-chain substituent of variable molar mass (i.e. mass tag) was prepared in this work. These monomers can be used in automated solid-phase phosphoramidite chemistry and therefore incorporated periodically as spacers inside digitally-encoded poly(phosphodiester) chains. Consequently, the formed polymers contain tagged cleavable sites that guide their fragmentation in mass spectrometry sequencing and enhance their digital readability. The spacers were all prepared via a seven steps synthetic procedure. They were afterwards tested for the synthesis and sequencing of model digital polymers. Uniform digitally-encoded polymers were obtained as major species in all cases, even though some minor defects were sometimes detected. Furthermore, the polymers were decoded in pseudo-MS3 conditions, thus confirming the reliability and versatility of the spacers library.

Covalent Attachment and Detachment by Reactive DESI of Sequence-Coded Polymer Taggants.

The use of sequence-defined polymers is an interesting emerging solution for materials identification and traceability. Indeed, a very large amount of identification sequences can be created using a limited alphabet of coded monomers. However, in all reported studies, sequence-defined taggants are usually included in a host material by noncovalent adsorption or entrapment, which may lead to leakage, aggregation, or degradation. To avoid these problems, sequence-defined polymers are covalently attached in the present work to the mesh of model materials, namely acrylamide hydrogels. To do so, sequence-coded polyurethanes containing a disulfide linker and a terminal methacrylamide moiety are synthesized by stepwise solid-phase synthesis. These methacrylamide macromonomers are afterward copolymerized with acrylamide and bisacrylamide in order to achieve cross-linked hydrogels containing covalently-bound polyurethane taggants. It is shown herein that these taggants can be selectively detached from the hydrogel mesh by reactive desorption electrospray ionization. Using dithiothreitol the disulfide linker that links the taggant to the gel can be selectively cleaved. Ultimately, the released taggants can be decoded by tandem mass spectrometry.

Sequencing of Uniform Multifunctional Oligoesters via Random Chain Cleavages.

Sequence-defined polymers have been the object of many fascinating studies that focus on their implementation in both material and life science applications. In parallel, iterative synthetic methodologies have become more efficient, whereas the structure elucidation of these molecules is generally dependent on MS/MS analysis. Here, we report an alternative, simple strategy for the determination of the monomer order of uniform oligo(thioether ester)s. This approach, which relies on random cleavages of ester units within the macromolecular backbone via a basic treatment, enables the swift characterization of these macromolecules without the need for MS/MS. Consequently, this method can be used for decoding any information stored within the primary structure of oligoesters by means of ESI- or LC-MS. Finally, we speculate that a range of structurally diverse backbones could be susceptible towards this approach, which could promptly expand the library of chemically sequenceable macromolecules.

2,5-Dimethylfuran/Acrylonitrile as Latent Monomer for Sequence-Controlled Copolymer and Sequence-Dependent Thermo-Responsivity.

Sequence control has attracted increasing attention for its ability of regulating polymer property and performance. Herein, the sequence-controlled polymer containing acrylonitrile (AN) is achieved by using 2,5-dimethylfuran/acrylonitrile adduct as a latent monomer. The temperature-dependent retro Diels-Alder reaction is engaged in controlling the release of AN during RAFT polymerization, that is, regulating the instant AN concentration via a non-invasive and in situ manner. Such control over the instant AN concentration and particularly the molar ratio of comonomer pair leads to the simultaneous change of monomer units in "living" polymeric chain, thus resulting in the sequence-controlled polymeric structures. By delicately manipulating the polymerization temperature, diverse sequence-on-demand structures of AN-containing copolymers, such as poly(AN/methyl methacrylate), poly(AN/styrene), poly(AN/butyl acrylate), poly(AN/N,N-dimethylacrylamide), and poly(AN/N-isopropylacrylamide) are created. Meanwhile, this study presents an initial attempt in tuning the thermal responsivity of poly(AN/N-isopropylacrylamide), which is closely correlated to the sequence of polymer structure. More importantly, the polymer with averagely distributed AN units results in the higher thermal sensitivity. Therefore, the synthetic strategy proposed in this work offers a promising platform for accessing the sequence-controlled copolymers containing AN structures, thus expanding the investigation on the relationship between the polymer structures and correlated properties.

Degradation in Order: Simple and Versatile One-Pot Combination of Two Macromolecular Concepts to Encode Diverse and Spatially Regulated Degradability Functions.

The clever one-pot combination of two macromolecular concepts, ring-opening polymerization (ROP) and step-growth polymerization (SGP), is demonstrated to be a simple, yet powerful tool to design a library of sequence-controlled polymers with diverse and spatially regulated degradability functions. ROP and SGP occur sequentially at room temperature when the organocatalytic conditions are switched from basic to acidic, and each allows the encoding of specific degradable bonds. ROP controls the sequence length and position of the degradability functions, while SGP between the complementary vinyl ether and hydroxyl chain-ends enables the formation of acetal bonds and high-molar-mass copolymers. The result is the rational combination of cleavable bonds prone to either bulk or surface erosion within the same macromolecule. The strategy is versatile and offers higher chemical diversity and level of control over the primary structure than current aliphatic polyesters or polycarbonates, while being simple, effective, and atom-economical and having potential for scalability.

Selective Bond Cleavage in Informational Poly(Alkoxyamine Phosphodiester)s.

The collision-induced dissociation (CID) of sequence-defined poly(alkoxyamine phosphodiester)s is studied by electrospray ionization mass spectrometry. These informational polymers are synthesized using three different nitroxide building blocks, namely proxyl-, SG1-, and TEMPO-derivatives. For a polymer containing TEMPO- and SG1-based main chain alkoxyamines, it is found that both types of alkoxyamines break in CID tandem mass spectrometry (MS/MS). However, SG1-sites are preferentially cleaved and this predominance can be increased by reducing collision energy, even though selective bond fragmentation is not observed. On the other hand, for a polymer containing proxyl- and SG1-alkoxyamines, selective bond cleavage is observed at all studied collision energies. The SG1-alkoxyamines can be first cleaved in MS/MS conditions and secondly the proxyl-alkoxyamines in pseudo-MS3 conditions. These results open up interesting new avenues for the design of readable, erasable or programmable informational polymers.

Damage and Repair in Informational Poly(N-substituted urethane)s.

The degradation and repair of uniform sequence-defined poly(N-substituted urethane)s was studied. Polymers containing an ω-OH end-group and only ethyl carbamate main-chain repeat units rapidly degrade in NaOH solution through an ω→α depolymerization mechanism with no apparent sign of random chain cleavage. The degradation mechanism is not notably affected by the nature of the side-chain N-substituents and took place for all studied sequences. On the other hand, depolymerization is significantly influenced by the molecular structure of the main-chain repeat units. For instance, hexyl carbamate main-chain motifs block unzipping and can therefore be used to control the degradation of specific sequence sections. Interestingly, the partially degraded polymers can also be repaired; for example by using a combination of N,N'-disuccinimidyl carbonate with a secondary amine building-block. Overall, these findings open up interesting new avenues for chain-healing and sequence editing.

Automated Synthesis Protocol of Sequence-Defined Oligo-Urethane-Amides Using Thiolactone Chemistry.

An automated, iterative protocol for the synthesis of multifunctional, sequence-defined oligo-urethane-amides using thiolactone chemistry is reported. Here, sequenced functionalization of the backbone is easily introduced using commercially available primary amines. The chemistry is carried out on solid phase using different supports for better optimization of the synthetic protocol and in order to demonstrate the versatility of the approach. This technique is very effective for iterative synthesis and solid-phase chemistry and enables the exploration of full automation of this approach using a robotic peptide synthesizer. As a result, this automated protocol allows for the synthesis of a sequence-defined nonamer of high purity.

Enabling Directional Sequence-Control via Step-Growth Polymerization of Heterofunctionalized Precision Macromonomers.

The synthesis of periodic copolymers with a regularly recurring sequence in one direction along the polymeric backbone is presented, applying a step-growth polymerization of heterofunctionalized precision macromonomers derived from solid phase synthesis (SPS) via photoinduced thiol-ene coupling (TEC). Heterofunctional macromonomers with monomer sequence-control of the AB type present a terminal alkene and a terminal thiol group carrying a photolabile protecting group to avoid uncontrolled polymerization by self-initiation. As protecting group, 3,4-methylenebisoxy-6-nitrobenzyl is attached onto the thiol via its bromide derivative directly on solid support. The protected heterofunctionalized macromonomer is polymerized in a two-step procedure, first cleaving the photolabile group and subsequent polymerization of the macromonomer via TEC, giving a high molecular weight polymer with M ¯ n of 23.8 kDa corresponding to a X ¯ n of 10 with one directional sequence-control due to their consistent head-to-tail linkage.

Multicomponent Reactions and Multicomponent Cascade Reactions for the Synthesis of Sequence-Controlled Polymers.

Control over the monomer sequence during polymerization has attracted great attention in polymer science, but it remains a serious challenge. Recently, multicomponent reactions have been playing a significant role in the synthesis of sequence-controlled polymers due to their inherent advantage of combining three or more starting materials in time-saving, one-pot operations to afford complex microstructures. In this feature article, the recent representative developments in the synthesis of sequence-controlled polymers by multicomponent reactions are highlighted to give insight on the design of novel sequence-controlled polymers with sufficient molecular diversity and complexity. The main part of this article is divided into three sections according to the different polymerization strategies using multicomponent reactions: direct multicomponent polymerization, multicomponent cascade polymerization, and iterative multicomponent reaction, respectively. It is anticipated that this feature article may provide some guidance for the fabrication of sequence-controlled polymers by multicomponent reactions.

Scalable synthesis of sequence-defined, unimolecular macromolecules by Flow-IEG.

We report a semiautomated synthesis of sequence and architecturally defined, unimolecular macromolecules through a marriage of multistep flow synthesis and iterative exponential growth (Flow-IEG). The Flow-IEG system performs three reactions and an in-line purification in a total residence time of under 10 min, effectively doubling the molecular weight of an oligomeric species in an uninterrupted reaction sequence. Further iterations using the Flow-IEG system enable an exponential increase in molecular weight. Incorporating a variety of monomer structures and branching units provides control over polymer sequence and architecture. The synthesis of a uniform macromolecule with a molecular weight of 4,023 g/mol is demonstrated. The user-friendly nature, scalability, and modularity of Flow-IEG provide a general strategy for the automated synthesis of sequence-defined, unimolecular macromolecules. Flow-IEG is thus an enabling tool for theory validation, structure-property studies, and advanced applications in biotechnology and materials science.

Cleavable Binary Dyads: Simplifying Data Extraction and Increasing Storage Density in Digital Polymers.

Digital polymers are uniform macromolecules that store monomer-based binary sequences. Molecularly stored information is usually extracted from the polymer by a tandem mass spectrometry (MS/MS) measurement, in which the coded chains are fragmented to reveal each bit (i.e. basic coded monomer unit) of the sequence. Here, we show that data-extraction can be greatly simplified by favoring the formation of MS/MS fragments containing two bits instead of one. In order to do so, digital poly(alkoxyamine phosphodiester)s, containing binary dyads in each repeat unit, were prepared by an orthogonal solid-phase approach involving successive phosphoramidite and radical-radical coupling steps. Three different sets of monomers were considered to build these polymers. In all cases, four coded building blocks-two hydroxy-nitroxides and two phosphoramidite monomers-were required to build the dyads. Among the three studied monomer sets, one combination allowed synthesis of uniform sequence-coded polymers. The resulting polymers led to clear dyad-containing fragments in MS/MS and could therefore be efficiently decoded. Additionally, an algorithm was created to detect specific dyad fragments, thus enabling automated sequencing.

Sequences of Sequences: Spatial Organization of Coded Matter through Layer-by-Layer Assembly of Digital Polymers.

A library of 16 digitally encoded polyanions was used in a layer-by-layer (LbL) polyelectrolyte assembly to nanofabricate thin films containing digitally coded strata. The polyanions were digital polyphosphodiesters (d-PPDE) prepared via an automated phosphoramidite process. Each component of the library contained 10 bytes of ASCII-encoded text (i.e. 80 coded monomers); thus the entire library allows the writing of a full sentence, which can be stored in a multilayer film as a sequence of sequences. To prepare fully segregated digital domains, non-coded layers composed of poly(allylamine hydrochloride) (PAH)/poly(sodium 4-styrenesulfonate) (PSS) were included between the d-PPDE coded layers as an intermediate barrier. Detailed analysis of the film homogeneity indicated formation of 70 nm-thick films in which digital layers are kept apart from another by non-coded interlayers. As a result, the sequence-coded polymer library could be piled-up in a defined sequence of layers.

Sequence Controlled Polymers from a Novel ß-Cyclodextrin Core.

In this work the synthesis and use of a novel ß-cyclodextrin-based single electron transfer-living radical polymerization (SET-LRP) initiator are reported. Three different approaches toward the synthesis of this initiator, based on several "click"-like reactions (copper(I)-catalyzed azide-alkyne cycloaddition, nucleophilic thiol-ene reaction, and radical thiol-ene reaction), are explored and discussed. Synthesis via radical thiol-ene proves to be most successful in achieving this. The ß-cyclodextrin-based initiator is subsequently used for the polymerization of several acrylates in a controlled fashion, yielding 7-arm multiblock copolymers. The achieved sequence-controlled polymers exhibit low dispersities (≤1.12) and are completed under 6.5 h at high monomer conversion (≥95%) for each block.

Defining the Field of Sequence-Controlled Polymers.

Over the last ten years, the development of synthetic polymers containing controlled monomer sequences has become a prominent topic in fundamental and applied polymer science. This emerging area is particularly broad and combines classical polymer chemistry tools with techniques imported from other domains such as biology, biochemistry, organic synthesis, engineering, and bioanalytics. Consequently, it also generates new structures, terminologies, and applications that are not within the traditional scope of polymer science. The term "sequence-controlled polymers" (SCPs) was recently proposed as a generic name to describe all these recent trends. However, since the field of SCPs has been growing very rapidly in recent literature, it is urgent to accurately define its scientific frontiers. In this important context, this review is an attempt to define, rationalize, and classify the field of SCPs. In particular, all synthetic approaches that have been reported for the synthesis of SCPs are discussed and categorized. In addition, the characterization tools, properties, and potential applications of these new polymers are described herein. Overall, this review serves as a reference guide for understanding the burgeoning field of SCPs.

Photocontrolled Synthesis of Abiotic Sequence-Defined Oligo(Phosphodiester)s.

A photoregulated phosphoramidite iterative process is studied for the synthesis of non-natural, digitally encoded oligo(phosphodiester)s. The oligomers are prepared using two reactive phosphoramidite monomers containing a 2-(2-nitrophenyl)propoxycarbonyl (NPPOC) protected OH group. The stepwise synthesis is performed on an OH-functional soluble polystyrene support, which allows recycling by precipitation in a nonsolvent. Repeating cycles involving phosphoramidite coupling, oxidation of phosphite to phosphate, and NPPOC deprotection by light irradiation at λ = 365 nm are performed in order to prepare oligomers with different lengths and sequences. Synthesis is conducted on a micromolar scale and good recycling yields are obtained in all cases. The use of a soluble polymer support allows an in-depth characterization of the NPPOC photo-deprotection step by 1 H NMR, UV spectroscopy, and size exclusion chromatography, and thus identification of optimal synthesis conditions. After cleavage from the support, the oligo(phosphodiester)s are characterized by tandem mass spectrometry, which confirms preparation of uniform sequence-coded oligomers.

2D Sequence-Coded Oligourethane Barcodes for Plastic Materials Labeling.

Mixtures of uniform sequence-defined oligourethanes are evaluated as 2D molecular barcodes for labeling three different commodity polymers, namely polystyrene, polyvinylchloride and polyethylene terephthalate. Six different oligourethanes are synthesized by solid-phase iterative synthesis and are coded using a binary monomer alphabet. High-resolution mass spectrometry studies indicate that all oligomers are uniform and sequence-defined. However, instead of using them as individual coded chains, oligomers with different chain-length, mass and sequence are mixed into intentionally polydispersed libraries. In particular, a three-component library and a four-component library are created to encode a 2-bytes model binary sequence. These 2D-coded libraries are incorporated in all commodity plastics via a simple solvent casting procedure. Furthermore, in all cases, the oligomer mixtures can be extracted from the host polymer films and deciphered by mass spectrometry, thus opening interesting avenues for anti-counterfeiting and traceability applications.