Factors influencing productivity of pine-dominated stands in South Korea.

Stand productivity research has mainly focused on increasing yield and has recently begun to examine changes in carbon storage. The Korean government is interested in finding ways to increase forest carbon capture to meet carbon neutrality requirements because approximately 63% of the land is covered by forests. In addition, 69% of these forests are older than 30 years old and their productivity and aboveground carbon storage rates are expected to decline. The purpose of this study was to examine the effect of quadratic mean diameter (QMD), stand basal area, site index, slope, climate (MAT and MAP), stand age, stand structural diversity, and stand composition on the productivity of aging Korean red pine-dominated stands. Based on the effects of these factors, we explored how to manage pine forests with the focus of increasing their productivity. Random forest regression was used for the analysis, and periodic basal area increment (PBAI) was used as the dependent variable of stand productivity. Our results show that the most influential factor on stand productivity was QMD. PBAI dramatically decreased from approximately 0.8 to 0.53 m2/ha·year as QMD increased up to 18 cm. Since diameter (QMD) increment is closely associated with changes in tree competition; increasing tree competition with increasing QMD and stand basal area may lead to decreases in PBAI owing to decreases in growth rate due to space and resource limitations and increases in mortality. PBAI decreased when basal area increased from 22 to 51.5 m2/ha. PBAI increased for site index values between 8 and 12.5 m and decreased for stand age values up to approximately 31 years. For climate factors, PBAI generally increased with increasing MAP and slightly increased as MAT increased up to approximately 11.2 °C and then decreased at higher MAT. PBAI initially increased with increasing slope values, decreased with values lower than 15°, and remained stable at slope values in the range of 16-34°. Stand structural diversity, which ranged from 1.32 to 1.62, exhibited a similar negative influence on PBAI associated with increasing stand density. With regard to pine composition, pine stands with a large proportion of pine basal area, showed higher productivity due to the simple stand structure resulting in better growth of shade intolerant pine. This study found that stand density increases with the development of pine stands and that density increases had negative influences on stand productivity. Collectively, our results suggest that stand density management is essential for increasing stand productivity and carbon sequestration in the Korean red pine-dominated stands of South Korea.

Tree species mixing can increase stand productivity, density and growth efficiency and attenuate the trade-off between density and growth throughout the whole rotation.

BACKGROUND AND AIMS: Many recent studies emphasize that mixed species is a promising silvicultural option for sustainable ecosystem management under uncertain and risky future environmental conditions. However, compared with monocultures, knowledge of mixed stands is still rather fragmentary. This comprehensive study analysed the most common Central European tree species combinations to determine the extent to which mono-layered species mixing (1) can increase stand productivity and stem diameter growth, (2) increase stand density or growth efficiency, and (3) reduce competition and attenuate the relationship between stand density and stem diameter growth compared with mono-specific stands. METHODS: The study was based on 63 long-term experimental plots in Germany with repeated spatially explicit stand inventories. They covered mono-specific and mixed species stands of Norway spruce (Picea abies), silver fir (Abies alba), Scots pine (Pinus sylvestris), European beech (Fagus sylvatica), sessile oak (Quercus petraea), European ash (Fraxinus excelsior) and sycamore maple (Acer pseudoplatanus). Based on spatially explicit measurement, we quantified for each tree the intra- or inter-specific neighbourhood, local stand density and growth. We applied mixed models to analyse how inter-specific neighbourhoods modify stand productivity, stand density, growth efficiency, individual tree growth and the trade-off between individual tree growth and stand productivity. KEY RESULTS: We found stand productivity gains of 7-53 % of mixed versus mono-specific stands continuing over the entire rotation. All mixtures achieved a 3-36 % higher leaf area index until advanced stand age. Stem diameter growth increased by up to 31 % in mixed stands. The growth efficiency of the leaf area was up to 31 % higher, except in mixtures of sessile oak and European beech. The trade-off between stem diameter growth and stand productivity was attenuated by the mixture. CONCLUSIONS: The increased productivity was mainly based on a density increase in the case of Norway spruce/silver fir/European beech and sessile oak/European beech and it was based on a more efficient resource use given the same stand density in the case of Scots pine/European beech and European ash/sycamore maple. In the other species assemblages the increased productivity was based on a combination of density and efficiency increase. We hypothesize that the density effect may be site-invariant and mainly depends on the structural species complementarity. The efficiency increase of growth may depend on the growth-limiting factor that is remedied by mixture and thus be co-determined by the site conditions. For forest management, the results indicate increased stand and tree size growth by species mixing. For the common mixtures examined in this study the results show that thinning for the acceleration of stem growth requires less density reduction and causes less stand growth losses than in monocultures. We discuss the consequences of our findings for silvicultural prescriptions for mixed-species stands.

Challenges With Managing Disease Complexes During Application of Different Measures Against Foliar Diseases of Field Pea.

Studies were undertaken across five field locations in Western Australia to determine the relative changes in disease severity and subsequent field pea yield from up to four foliar pathogens associated with a field pea foliar disease complex (viz. genera Didymella, Phoma, Peronospora, and Septoria) across four different pea varieties sown at three different times and at three different densities. Delaying sowing of field pea significantly (P < 0.05) reduced the severity of Ascochyta blight (all five locations) and Septoria blight (one location), increased the severity of downy mildew (four locations), but had no effect on seed yield. In relation to Ascochyta blight severity at 80 days after sowing, at all locations the early time of sowing had significantly (P < 0.05) more severe Ascochyta blight than the mid and late times of sowing. Increasing actual plant density from 20 to 25 plants m-2 to 58 to 78 plants m-2 significantly (P < 0.05) increased the severity of the Ascochyta blight (four locations) and downy mildew (one location), and it increased seed yield at four locations irrespective of sowing date and three locations irrespective of variety. Compared with varieties Dundale, Wirrega, and Pennant, variety Alma showed significantly (P < 0.05) less severe Ascochyta blight, downy mildew, and Septoria blight (one location each). Grain yield was highest for the early time of sowing at three locations. Varieties Alma, Dundale, and Wirrega significantly (P < 0.05) outyielded Pennant at four locations. The percentage of isolations of individual Ascochyta blight pathogens at 80 days after the first time of sowing varied greatly, with genus Didymella ranging from 25 to 93% and genus Phoma ranging from 6 to 23% across the five field locations. This fluctuating nature of individual pathogen types and proportions within the Ascochyta blight complex, along with variation in the occurrence of pathogens Peronospora and Septoria, highlights the challenges to understand and manage the complexities of co-occurring different foliar pathogens of field pea. While the search for more effective host resistance continues, there is a need for and opportunities from further exploring and exploiting cultural management approaches focusing on crop sequence diversification, intercropping, manipulating time of sowing and stand density, and application of improved seed sanitation and residue/inoculum management practices. We discuss the constraints and opportunities toward overcoming the challenges associated with managing foliar disease complexes in field pea.

Light-mediated self-organization of sunflower stands increases oil yield in the field.

Here, we show a unique crop response to intraspecific interference, whereby neighboring sunflower plants in a row avoid each other by growing toward a more favorable light environment and collectively increase production per unit land area. In high-density stands, a given plant inclined toward one side of the interrow space, and the immediate neighbors inclined in the opposite direction. This process started early as an incipient inclination of pioneer plants, and the arrangement propagated gradually as a "wave" of alternate inclination that persisted until maturity. Measurements and experimental manipulation of light spectral composition indicate that these responses are mediated by changes in the red/far-red ratio of the light, which is perceived by phytochrome. Cellular automata simulations reproduced the patterns of stem inclination in field experiments, supporting the proposition of self-organization of stand structure. Under high crop population densities (10 and 14 plants per m2), as yet unachievable in commercial farms with current hybrids due to lodging and diseases, self-organized crops yielded between 19 and 47% more oil than crops forced to remain erect.

Fire deficits have increased drought sensitivity in dry conifer forests: Fire frequency and tree-ring carbon isotope evidence from Central Oregon.

A century of fire suppression across the Western United States has led to more crowded forests and increased competition for resources. Studies of forest thinning or stand conditions after mortality events have provided indirect evidence for how competition can promote drought stress and predispose forests to severe fire and/or bark beetle outbreaks. Here, we demonstrate linkages between fire deficits and increasing drought stress through analyses of annually resolved tree-ring growth, fire scars, and carbon isotope discrimination (Δ13 C) across a dry mixed-conifer forest landscape. Fire deficits across the study area have increased the sensitivity of leaf gas exchange to drought stress over the past >100 years. Since 1910, stand basal area in these forests has more than doubled and fire-return intervals have increased from 25 to 140 years. Meanwhile, the portion of interannual variation in tree-ring Δ13 C explained by the Palmer Drought Severity Index has more than doubled in ca. 300-500-year-old Pinus ponderosa as well as in fire-intolerant, ca. 90-190-year-old Abies grandis. Drought stress has increased in stands with a basal area of ≥25 m2 /ha in 1910, as indicated by negative temporal Δ13 C trends, whereas stands with basal area ≤25 m2 /ha in 1910, due to frequent or intense wildfire activity in decades beforehand, were initially buffered from increased drought stress and have benefited more from rising ambient carbon dioxide concentrations, [CO2 ], as demonstrated by positive temporal Δ13 C trends. Furthermore, the average Δ13 C response across all P. ponderosa since 1830 indicates that photosynthetic assimilation rates and stomatal conductance have been reduced by ~10% and ~20%, respectively, compared to expected trends due to increasing [CO2 ]. Although disturbance legacies contribute to local-scale intensity of drought stress, fire deficits have reduced drought resistance of mixed-conifer forests and made them more susceptible to challenges by pests and pathogens and other disturbances.

Forest structure and climate mediate drought-induced tree mortality in forests of the Sierra Nevada, USA.

Extreme drought stress and associated bark beetle population growth contributed to an extensive tree mortality event in California, USA, resulting in more than 129 million trees dying between 2012 and 2016. Although drought is an important driver of this mortality event, past and ongoing fire suppression and the consequent densification of forests may have contributed. In some areas, land management agencies have worked to reduce stand density through mechanical treatments and prescribed fire to restore forests to less dense, more open conditions that are presumably more resilient to disturbance and changing climate. Here, we evaluate if stand structural conditions associated with treated (e.g., thinned and prescribed burned) forests in the Sierra Nevada of California conferred more resistance to the bark beetle epidemic and drought event of 2012-2016. We found that, compared to untreated units, treated units had lower stand densities, larger average tree diameters, and greater dominance of pines (Pinus), the historically dominant trees. For all tree species studied, mortality was substantially greater in climatically drier areas (i.e., lower elevations and latitudes). Both pine species studied (ponderosa pine [Pinus ponderosa] and sugar pine [Pinus lambertiana]) had greater mortality in areas where their diameters were larger, suggesting a size preference for their insect mortality agents. For ponderosa pine, the tree species experiencing greatest mortality, individual-tree mortality probability (for a given tree diameter) was significantly lower in treated stands. Ponderosa pine mortality was also positively related to density of medium- to large-sized conspecific trees, especially in areas with lower precipitation, suggesting that abundance of nearby host trees for insect mortality agents was an important determinant of pine mortality. Mortality of incense cedar (Calocedrus decurrens) and white fir (Abies concolor) was positively associated with basal area, suggesting sensitivity to competition during drought, but overall mortality was lower, likely because the most prevalent and effective mortality agents (the bark beetles Dendroctonus brevicomis and D. ponderosae) are associated specifically with pine species within our study region. Our findings suggest that forest thinning treatments are effective in reducing drought-related tree mortality in forests, and they underscore the important interaction between water and forest density in mediating bark beetle-caused mortality.

Heavy and frequent thinning promotes drought adaptation in Pinus sylvestris forests.

Droughts and their negative effects on forest ecosystems are projected to increase under climate change for many regions. It has been suggested that intensive thinning could reduce drought impacts on established forests in the short-term. Most previous studies on the effect of thinning on drought impacts, however, have been confined to single forest sites. It is therefore still unclear how general and persisting the benefits of thinning are. This study assesses the potential of thinning to increase drought tolerance of the wide spread Scots pine (Pinus sylvestris) in Central Europe. We hypothesized (1) that increasing thinning intensity benefits the maintenance of radial growth of crop trees during drought (resistance) and its recovery following drought, (2) that those benefits to growth decrease with time elapsed since the last thinning and with stand age, and (3) that they may depend on drought severity as well as water limitations in pre- and post-drought periods. To test these hypotheses, we assessed the effects of thinning regime, stand age, and drought severity on radial growth of 129 Scots pine trees during and after drought events in four long-term thinning experiments in Germany. We found that thinning improved the recovery of radial growth following drought and to a lesser extent the growth resistance during a drought event. Growth recovery following drought was highest after the first thinning intervention and in recently and heavily thinned stands. With time since the last thinning, however, this effect decreased and could even become negative when compared to unthinned stands. Further, thinning helped to avoid an age-related decline in growth resistance (and recovery) following drought. The recovery following drought, but not the resistance during drought, was related to water limitations in the drought period. This is the first study that analyzed drought-related radial growth in trees of one species across several stands of different age. The interaction between thinning intensity and time since the last thinning underline the importance to distinguish between short- and long-term effects of thinning. According to our analysis, only thinning regimes, with relatively heavy and frequent thinning interventions would increase drought tolerance in pine stands.

Leaf dynamics in growth and reproduction of Xanthium canadense as influenced by stand density.

BACKGROUND AND AIMS: Leaf longevity is controlled by the light gradient in the canopy and also by the nitrogen (N) sink strength in the plant. Stand density may influence leaf dynamics through its effects on light gradient and on plant growth and reproduction. This study tests the hypothesis that the control by the light gradient is manifested more in the vegetative period, whereas the opposite is true when the plant becomes reproductive and develops a strong N sink. METHODS: Stands of Xanthium canadense were established at two densities. Emergence, growth and death of every leaf on the main stem and branches, and plant growth and N uptake were determined from germination to full senescence. Mean residence time and dry mass productivity were calculated per leaf number, leaf area, leaf mass and leaf N (collectively termed 'leaf variables') in order to analyse leaf dynamics and its effect on plant growth. KEY RESULTS: Branching and reproductive activities were higher at low than at high density. Overall there was no significant difference in mean residence time of leaf variables between the two stands. However, early leaf cohorts on the main stem had a longer retention time at low density, whereas later cohorts had a longer retention time at high density. Branch leaves emerged earlier and tended to live longer at low than at high density. Leaf efficiencies, defined as carbon export per unit investment of leaf variables, were higher at low density in all leaf variables except for leaf number. CONCLUSIONS: In the vegetative phase of plant growth, the light gradient strongly controls leaf longevity, whereas later the effects of branching and reproductive activities become stronger and over-rule the effect of light environment. As leaf N supports photosynthesis and also works as an N source for plant development, N use is pivotal in linking leaf dynamics with plant growth and reproduction.

Stem extension and mechanical stability of Xanthium canadense grown in an open or in a dense stand.

BACKGROUND AND AIMS: Plants in open, uncrowded habitats typically have relatively short stems with many branches, whereas plants in crowded habitats grow taller and more slender at the expense of mechanical stability. There seems to be a trade-off between height growth and mechanical stability, and this study addresses how stand density influences stem extension and consequently plant safety margins against mechanical failure. METHODS: Xanthium canadense plants were grown either solitarily (S-plants) or in a dense stand (D-plants) until flowering. Internode dimensions and mechanical properties were measured at the metamer level, and the critical buckling height beyond which the plant elastically buckles under its own weight and the maximum lateral wind force the plant can withstand were calculated. KEY RESULTS: Internodes were longer in D- than S-plants, but basal diameter did not differ significantly. Relative growth rates of internode length and diameter were negatively correlated to the volumetric solid fraction of the internode. Internode dry mass density was higher in S- than D-plants. Young's modulus of elasticity and the breaking stress were higher in lower metamers, and in D- than in S-plants. Within a stand, however, both moduli were positively related to dry mass density. The buckling safety factor, a ratio of critical buckling height to actual height, was higher in S- than in D-plants. D-plants were found to be approaching the limiting value 1. Lateral wind force resistance was higher in S- than in D-plants, and increased with growth in S-plants. CONCLUSIONS: Critical buckling height increased with height growth due mainly to an increase in stem stiffness and diameter and a reduction in crown/stem mass ratio. Lateral wind force resistance was enhanced due to increased tissue strength and diameter. The increase in tissue stiffness and strength with height growth plays a crucial role in maintaining a safety margin against mechanical failure in herbaceous species that lack the capacity for secondary growth.

[Effects of thinning on accumulation of soil microbial residue carbon of Picea asperata plantations in sub-alpine region of western Sichuan, China]. / 间伐对川西亚高山云杉人工林土壤微生物残体碳积累的影响.

Microbial residues are an important component of soil organic carbon (SOC). It is unclear how long-term thinning affects the accumulation characteristics of microbial residue carbon (C). We analyzed the differences in soil physicochemical properties, microbial communities, extracellular enzyme activities, and microbial residue C in topsoil (0-10 cm) and subsoil (20-30 cm) in Picea asperata plantation of non-thinned (control, 4950 trees·hm-2) and thinned for 14 years (1160 trees·hm-2) stands, aiming to reveal the regulatory mechanism of thinning on microbial residue C accumulation. The results showed that thinning significantly increased SOC content, total nitrogen content, available phosphorus content, the proportion of particulate organic C, soil water content, C-cycle hydrolase, and acid phosphatase activities, but significantly reduced the proportion of mineral-associated organic C. Thinning significantly affected the content of fungal and microbial residue C, and the contribution of microbial residue C to SOC, and these effects were independent of soil layer. The content of fungal and microbial residue C was 25.0% and 24.5% higher under thinning treatments. However, thinning significantly decreased the contribution of microbial residue C to SOC by 12.3%, indicating an increase in the proportion of plant-derived C in SOC. Stepwise regression analysis showed that total nitrogen and soil water content were key factors influencing fungal and micro-bial residue C accumulation. In summary, thinning promoted microbial residue C sequestration by altering soil pro-perties and changed the composition of SOC sources.

Physiological and Molecular Response of Liriodendron chinense to Varying Stand Density.

Stand density affects the potentially superior productivity of forest ecosystems directly by regulating the light and nutrient availability of trees. Understanding how stand density influences the growth and development of trees is crucial for supporting forest management in the context of climate change. We focused on Liriodendron chinense in experimental plantations created in 2003, with planting densities ranging from 277 to 10,000 trees per hectare at six plots. The leaf structure and photosynthetic capacity of L. chinense changed significantly under different stand densities, which had a negative impact on their biomass (leaf mass) and nutrient (total carbohydrate content) accumulation. Transcriptional differences were observed among samples from plots with different planting densities. The expression of 1784 genes was negatively dependent on stand density, participating mainly in the biological processes of "circadian rhythm", "carbon metabolism", and "amino acid biosynthesis". Furthermore, we identified a photosynthesis-related module and constructed a gene regulatory network to discover that the transcription factors of MYB and bHLH may have important roles in the transcriptional regulation of photosynthesis biosynthesis by activating or repressing the expression of petA (Litul.15G096200), psbE (Litul.10G033900), and petD (Litul.17G061600) at different stand densities. Our study quantified the impact of stand density on tree growth at physiological and molecular levels. Our observations provide theoretical support for plantation establishment of L. chinense.

Estimation of changes in carbon sequestration and its economic value with various stand density and rotation age of Pinus massoniana plantations in China.

Plantations actively participate in the global carbon cycle and play a significant role in mitigating global climate change. However, the influence of forest management strategies, especially planting density management, on the biomass carbon storage and production value of plantations for ensuring carbon sink benefits is still unclear. In this study, we estimated the carbon sequestration and economic value of Pinus massoniana plantations with various stand densities and rotation ages using a growth model method. The results revealed that with increasing stand age, low-density plantations at 2000 trees·ha-1 (358.80 m3·ha-1), as well as high-density plantations at 4500 trees·ha-1 (359.10 m3·ha-1), exhibited nearly identical standing volumes, which indicated that reduced inter-tree competition intensity favors the growth of larger trees during later stages of development. Furthermore, an increase in planting density led to a decrease in the average carbon sequestration rate, carbon sink, and number of trees during the rapid growth period, indicating that broader spacing between trees is favorable for biomass carbon accumulation. Further, extending the rotation period from 15 to 20 years or 25 years and reducing the optimal planting density from 3000 to 2000 trees·ha-1 increased the overall benefits of combined timber and carbon sink income by 2.14 and 3.13 times, respectively. The results highlighted that optimizing the planting density positively impacts the timber productivity and carbon sink storage of Pinus massoniana plantations and boosts the expected profits of forest managers. Thus, future afforestation initiatives must consider stand age and planting density management to shift from a scale-speed pattern to a quality-benefit design.

Height-diameter models of regenerated saplings of Larix gmelinii based on dummy variable and quantile regression.

Based on data collected from 2054 saplings of Larix gmelinii forest in 55 fixed plots in 2018-2019 in Cuigang Forestry Station, Daxing'anling area, we classified the stand density index (SDI) into four classes, i.e., Class Ⅰ (SDI1<1863 plants·hm-2), Class Ⅱ (1863 plants·hm-2≤SDI2<2155 plants·hm-2), Class Ⅲ (2155 plants·hm-2≤SDI3<2459 plants·hm-2) and Class Ⅳ (SDI4≥2459 plants·hm-2) by using the quartile method. We constructed a dummy variable model and quantile regression model for the height-breast diameter of saplings of L. gmelinii with dummy variable method introduced SDI. The results showed that among the five selected representative non-linear tree height curve models, the Richards model fitted the best, with Ra2, RMSE and MAE of 0.7637, 0.8250 m and 0.5696 m. The dummy variable model including the SDI constructed based on the Richards model showed a 1.3% increase in Ra2 compared with the base model, while RMSE, MAE, and AIC decreased by 2.1%, 1.5%, and 11.2%, respectively. When the quantile τ was 0.5, Ra2 of quantile regression model was the maximum, and RMSE, MAE, AIC was the minimum, being 0.7612, 0.8294 m, 0.5657 m, and -767.19, respectively. Compared with SDI1, sapling height in SDI2-SDI4 was increased by 5.6%, 5.6%, and 11.3%, suggesting reasonable that regulation of stand density was conducive to increase the height growth of saplings in regeneration.

Comparisons of PM2.5 mitigation with stand characteristics between evergreen Korean pine plantations and deciduous broad-leaved forests in the Republic of Korea.

Owing to industrialization and urbanization in recent decades, fine particulate matter (PM2.5) in the atmosphere has become a major environmental problem worldwide. This environmental issue pushed the use of forests as air filtering tools. However, there is a lack of continuous and long-term forest management to efficiently mitigate PM2.5. In this study, we assessed the potential of different forest types to control air pollution by measuring the seasonal PM2.5 concentrations inside and outside the forest for one year. In addition, the PM2.5 reduction efficiencies (PMREs) of two forest types were compared, and their relationship with stand characteristics was analyzed. The results showed that the average PMRE inside the forests was approximately 18.2%; the seasonal PMRE was highest in winter (approximately 28.1%) and lowest in summer (approximately 9.6%). The average PMRE of the Taehwa deciduous broad-leaved forest (TDF) (approximately 18.8%) was significantly higher than that of the Taehwa coniferous forest (TCF) (approximately 17.5%) (P < 0.001); differences were also observed seasonally. The PMRE in the TCF was higher in spring and summer (P < 0.001), while that in the TDF was higher in autumn and winter (P < 0.001). Furthermore, the PMRE in the TDF was negatively correlated with stand density (P = 0.003) and positively correlated with the average diameter at breast height (DBH) (P = 0.028). However, the PMRE in the TCF did not significantly correlate with stand characteristics. As such, the results of this study revealed the differences in PM2.5 mitigation according to stand characteristics, which should be considered in urban forest management.

Identification of a Seed Vigor-Related QTL Cluster Associated with Weed Competitive Ability in Direct-Seeded Rice (Oryza Sativa L.).

Direct seeding of rice (Oryza sativa L.) is a low-labor and sustainable cultivation method that is used worldwide. Seed vigor and early vigor are important traits associated with seedling stand density (SSD) and weed competitive ability (WCA), which are key factors in direct-seeded rice (DSR) cultivation systems. Here, we developed a set of chromosome segment substitution lines with Xiushui134 as receptor parent and Yangdao6 as donor parent and used these lines as a mapping population to identify quantitative trait loci (QTLs) for seed vigor, which we evaluated based on germinability-related indicators (germination percentage (GP), germination energy (GE), and germination index (GI)) and seedling vigor-related indicators (root number (RN), root length (RL), and shoot length (SL) at 14 days after imbibition) under controlled conditions in an incubator. Ten QTLs were detected across four chromosomes, of which a cluster of QTLs (qGP11, qGE11, qGI11, and qRL11) co-localized on Chr. 11 with high LOD values (12.03, 8.13, 7.14, and 8.75, respectively). Fine mapping narrowed down the QTL cluster to a 0.7-Mb interval between RM26797 and RM6680. Further analysis showed that the QTL cluster has a significant effect (p < 0.01) on early vigor under hydroponic culture (root length, total dry weight) and direct seeding conditions (tiller number, aboveground dry weight). Thus, our combined analysis revealed that the QTL cluster influenced both seed vigor and early vigor. Identifying favorable alleles at this QTL cluster could facilitate the improvement of SSD and WCA, thereby addressing both major factors in DSR cultivation systems.

[Responses of stand growth, regeneration, and understory species diversity in Quercus mongolica secondary forest to stand density.] / è’™å¤æ Žæ¬¡ç”Ÿæž—çš„ç”Ÿé•¿æ›´æ–°ä¸Žæž—ä¸‹æ¤è¢«å¤šæ ·æ€§å¯¹æž—åˆ†å¯†åº¦çš„å“åº”.

Six Quercus mongolica plots with an area of 0.1 hm2 were thinned in 2018. A field survey was carried out in 2020 to examine the effects of different stand densities (high: 900 trees·hm-2; medium: 720 trees·hm-2; low: 600 trees·hm-2) on growth and regeneration of stands and understory species diversity of secondary Q. mongolica forests in Qingyuan, Liaoning Province. Due to the short interval after thinning, there was no significant difference in tree height and diameter at breast height under different densities. However, the crown symmetry index under low stand density was significantly higher than that of high stand density, indicating that crown growth was more sensitive to stand density than trunk growth. The abundance of seedlings was the highest in the medium density, and the basal diameter of the seedlings with the same height was significantly higher, and the seedling regeneration and growth at the medium density were much better than the other two densities. A total of 70 species were recorded, belonging to 41 families and 67 genera. Quercus mongolica, Lespedeza bicolor, Melampyrum roseum, and Potentilla freyniana were the dominant species of trees and herbs, respectively. Simpson index, Pielou index and Shannon index of shrub layer and herb layer were the highest at the medium density. It indicated that the stand density of 720 trees·hm-2 could help maintain the sustainable development of Q. mongolica secondary forest in the mountainous area of eastern Liaoning.

[Characteristics of nutrient accumulation and vertical spatial distribution in Cunninghamia lanceolata plantation with different stand densities]. / ä¸åŒæž—åˆ†å¯†åº¦æ‰æœ¨æž—å »åˆ†ç§¯ç´¯ä¸Žåž‚ç›´ç©ºé—´åˆ†é .

The growth, biomass, nutrient content and accumulation as well as the vertical distribution of nutrient accumulation in Cunninghamia lanceolata plantation across densities of 1800, 3000, 4500 trees·hm-2 were stu-died in order to provide scientific basis for efficient cultivation of C. lanceolata plantation. The total amounts of nutrients accumulated in C. lanceolata plantation with 1800, 3000, 4500 trees·hm-2 were 1311.57, 2531.55 and 2307.33 kg·hm-2, respectively. There were significant variations among different densities. Under the same density, the order of nutrient content and accumulation in C. lanceolata plantation was total N > total K > total Ca > total Mg > total P. Moreover, the amount of nutrients in trunk and bark decreased with the increases of tree height. The amount of nutrient accumulation in persistent withered branch and leaf were allocated from middle to the upper part of tree, while the opposite was observed for fresh branch and leaf. N accumulation increased with the increases of stand densities, while the other nutrients first increased then decreased. The order of the amount of nutrient accumulation in trunk, bark, root, persistent withered branch, persistent withered leaf and litter among different densities was 4500 > 3000 > 1800 trees·hm-2, and was 3000 > 1800 > 4500 trees·hm-2 in fresh branch and leaf, and 1800 > 3000 > 4500 trees·hm-2 in understory. Under the densities of 1800 and 4500 trees·hm-2, the nutrient distribution ratio in bark was the largest, accounting for 21.6% and 19.4%. In 3000 trees·hm-2, the distribution ratio of fresh leaves reached its maximum, accounting for about 22.9%, and the next was fresh branches, which had a distribution ratio of about 17.8%. 3000 trees·hm-2 was the most appropriate density for nutrient accumulation and distribution in C. lanceolata plantation.

Changes in litter input exert divergent effects on the soil microbial community and function in stands of different densities.

Soil microbial communities influence soil biogeochemical cycling by affecting the production of extracellular enzymes and the release of carbon dioxide. Changes in litter input or stand density due to thinning can affect soil microbial communities and their function by altering soil biochemical properties. However, it is unclear how or to what extent different amounts of litter input affect soil microbial communities and their function in forest stands with different densities. Therefore, we simulated litter removal, 50 % litter reduction, normal litter input, and double litter increase under field conditions by applying different amounts of litter to soils with different stand densities in the laboratory. We then measured soil biochemical properties, microbial communities, enzyme activity, and respiration rate. Our results revealed that the responses of soil dissolved organic carbon and total nitrogen to litter input were more pronounced in the high-density forest stand with poor soil than in the low-density forest stand with nutrient-rich soil, which was mainly reflected in that the addition of litter significantly decreased the concentration of dissolved organic carbon while increasing the content of total nitrogen in the soil of the high-density forest stand. In comparison to the soil carbon component, the nitrogen component of the soil was more affected by stand density. The responses of soil fungal and bacterial communities to leaf litter treatment varied with stand density, as reflected primarily in changes in the relative abundances of Ascomycota, unclassified_K_fungi, and Proteobacteria, and changes in the relative abundances of their functional groups (ectomycorrhizal fungi, saprophytic fungi, pathogens, parasites, and bacteria involved in the nitrogen cycle). Soil fungal community responses to changes in litter input are more sensitive in the high-density forest with nutrient-poor soil than in the low-density forest stand. Furthermore, litter input inhibited the activities of soil ß-glucuronidase, N-acetyl-ß-d-glucosaminidase, and acid phosphatase more strongly in the low-density forest stand. Litter manipulation primarily affected enzymatic activity in the high-density forest stand by changing the diversity and composition of the soil fungal community. However, in the low-density forest stand, litter treatment affected soil enzyme activity, primarily through changes in soil bacterial and fungal community composition, as well as soil respiration through changes in bacterial richness (Chao 1) and community composition. We conclude that how the change in litter input impacts the soil microbial community and its function, or the magnitude of the effects, is largely dependent on soil quality. Relationships among soil variables, microbial communities, and function differ between stand densities. Our study contributes to an enhanced understanding of the impact of changes in litter input due to climate change or anthropogenic activities on soil biogeochemical cycles and can also guide rationally formulating forest management approaches to improve microbial function under climate change.

Variation in Growth, Wood Density, and Stem Taper Along the Stem in Self-Thinning Stands of Sassafras tzumu.

Silvicultural practices greatly improve the economic value of wood products from forests. Stem dimensions, wood density, and stem form are closely linked to end-product performance. This research aimed to examine the effects of stand density and stem height on variables that reflect ring growth and wood properties of Sassafras tzumu stands during the self-thinning phase. Between the ages of 10 and 40 years, the number of stems per hectare has declined from 1,068 to 964 due to density-dependent mortality. As the relative stand density decreased, there were significant reductions in the average tree ring width (5.07-3.51 mm) and increases in latewood proportions (49.88-53.49%) and the density of the annual growth ring (165.60-708.58 kg/m3). Therefore, ring density, earlywood density, and latewood density increased with decreasing relative stand density after self-thinning occurred. Ring width, earlywood width, and latewood width significantly increased from the base to the apex of the stem. Stand density and stem height had additive effects on S. tzumu wood properties during the self-thinning phase. A shift in the growth allocation along the longitudinal stem in response to self-thinning resulted in decreasing radial growth, increasing wood density, and improved stem form. In summary, we found a significant influence of stand density on tree ring growth, wood quality, and stem form of S. tzumu trees during the self-thinning phase.

Impacts of stand density on diversity of understory plant and soil seed banks in a Pinus massoniana plantation.

Stand density is a critical factor impacting the diversity of understory plants. We analyzed the diversity of understory plants and soil seed banks, as well as their relationship by setting up three planting densities in a Pinus massoniana plantation, including low density (1575 trees·hm-2, D1), medium (2474 trees·hm-2, D2), and high (3550 trees·hm-2, D3). It aimed to provide a scientific basis for the implementation of the multi-objective sustainable development of plantations. The results showed that there were 70 species of herbs and shrubs belonging to 42 families and 62 genera. D1 was dominated by heliophiles, whereas both the D2 and D3 were dominated by shade-tolerant species. The Margalef (M), Shannon (H), Simpson (D), Pielou (Jsw), and Altalo (Al) indices of the herbs and shrubs exhibited a downward trend with increasing stand den-sity. In the herb layer, D1 and D3 showed significant difference in H, D, Jsw and Al. There were significant differences of Jsw and Al in the shrub layer among the three stand densities, but no diffe-rence of H and D. H, D, Jsw and Al in the soil seed bank first decreased and then increased with increasing stand density, with species richness and diversity being the highest in D1. The similarity coefficient of Jaccard and Sorensen among different stand densities was low. In the herb layer, M was positively correlated with Jsw. The correlations between stand density and H, D, Jsw and Al were greater in the shrub layer than in the herb layer. There was significant negative correlation between stand density and Jsw both in the shrub and herb layers. The stand density of 1575 trees·hm-2 was comparatively beneficial for the development of understory, plant diversity, and sustainability of P. massoniana plantation.