Rational Design of Tetrahedral Derivatives as Efficient Light-Emitting Materials Based on "Super Atom" Perspective.

Traditional semiconductor quantum dots of groups II-VI are key ingredients of next-generation display technology. Yet, the majority of them contain toxic heavy-metal elements, thus calling for alternative light-emitting materials. Herein, we have explored three novel categories of multicomponent compounds, namely, tetragonal II-III2-VI4 porous ternary compounds, cubic I2-II3-VI4 ternary compounds, and cubic I-II-III3-V4 quaternary compounds. This is achieved by judicious introduction of a "super atom" perspective and concurrently varying the solid-state lattice packing of involved super atoms or the population of surrounding counter cations. Based on first-principles calculations of 392 candidate materials with designed crystal structures, 53 highly stable materials have been screened. Strikingly, 34 of them are direct-bandgap semiconductors with emitting wavelengths covering the near-infrared and visible-light regions. This work provides a comprehensive database of highly efficient light-emitting materials, which may be of interest for a broad field of optoelectronic applications.

Antimicrobial efficiency against fish pathogens on the green synthesized silver nanoparticles.

Fish-borne pathogens such as A. hydrophila and F. aquidurense are the most resistant strains in pisciculture farming. Removing the aforementioned pathogens without antibiotics presents a formidable challenge. To overcome this problem, silver nanoparticles (AgNPs) are synthesized using silver nitrate, water medium, and as an AzadirachtaIndica leaf extract via the green synthesis route. X-ray diffraction (XRD) pattern results authenticate the synthesized material is the face-centered cubic structure of silver. The optical absorption edge of the synthesized product was found at the wavelength of 440 nm from the UV-visible spectra, which is confirmed to relate to the Surface Plasmon Resonance peaks of silver particles. In addition, the optical band gap value of the synthesized Ag sample is measured to be 2.81 eV from the obtained optical absorption spectra. EDX spectrum of the synthesized product also supports confirming the silver particle formation. The FT-IR spectra of the neem extract and silver nanoparticles showed their characteristic functional groups, respectively. The presence of bands between 1000 cm-1 to 500 cm-1 indicates to the formation of silver particles. Spherical particles appeared in the synthesized Ag using Scanning Electron Microscopy (SEM) and Transmission Electron Microscopy (TEM). The particle size of Ag NPs was measured as 40 nm and 62 ± 10 nm by TEM and Dynamic Light Scattering (DLS). The zeta potential was also measured as -12 mV showing the synthesized sample's stable nature. Using the DPPH assay, synthesized AgNPs were taken along with the various concentrations of ascorbic acid (20, 40, 60, 80, and 100 µg/mL) to examine the free radical scavenging activity (RSA). RSA value is higher (84 ± 2 %) for synthesized AgNPs at higher concentration (100 µg/mL) than 21 ± 2 % at low concentration (100 µg/mL). The antimicrobial efficacy of the AgNPs against A. hydrophila and F. aquidurense was performed through the agar diffusion method and its results showed the inhibitory zones of the F.aquidurense and A. hydrophila were measured as 25 ± 3 mm, and 28 ± 4 mm respectively. The synthesized Ag particles showed excellent antimicrobial and antioxidant properties confirmed by antimicrobial and DPPH experiments. It implies that the green synthesized silver nanoparticles could be a good alternative for antibiotics in aquaculture farms. The exposure of low concentrations of silver nanoparticles to zebrafish and brine shrimp does not affect the viability and morphology. The exposure of silver nanoparticles in the fisheries in optimized concentration and time could control the fish-borne pathogens without antibiotics.

Effect of different salts on the foaming properties of model protein systems for infant formula.

This multiscale study aimed to evaluate the effects of different salts (NaCl, KCl, MgCl2, and CaCl2) on the foaming capacity (FC) and foam stability (FS) of model protein systems (MPS) for infant formula via changes in surface and structural properties. Our results showed that the FC and FS of MPS were increased with the addition of NaCl, KCl, and MgCl2, whereas CaCl2 significantly decreased FC (79.5 ± 10.6%) and increased FS (93.2 ± 2.2%). The surface hydrophobicity was increased and the net charge and surface tension were reduced after the addition of salts. Structural analysis revealed the reduction of intensity of intrinsic fluorescence spectroscopy and UV absorption, and the conversion of α-helix into ß-strand, which was attributed to protein agglomeration. Additionally, MgCl2 and CaCl2 exhibited larger size and lower net charge compared with NaCl and KCl, indicating a greater ability to bind to charged amino acids and form larger aggregates. Correlation analysis indicated that FC was positively related to adsorbed protein and ß-turn and negatively correlated with particle size. In addition, FS showed a positive correlation with ß-strand, apparent viscosity, and zeta potential. However, it exhibited a negative correlation with ß-turn, α-helix, and sulfhydryl content. These results provide a theoretical reference for further understanding of the effect of salts on the foaming properties of MPS.

Effect of thermal and non-thermal processing methods on the Structural and Functional Properties of Whey Protein from Donkey Milk.

This study evaluated the impact of thermal, ultrasonication, and UV treatment on the structural and functional properties of whey proteins from donkey milk (DWP). Whey proteins exhibited notable stability in non-heat-treated environments, while their structural and functional characteristics were notably impacted by excessive heat treatment. The application of high-temperature long-time thermal treatment (HTLT) resulted in a decrease in fluorescence intensity, foaming and emulsification stability, and considerable damage to the active components of the proteins. Specifically, the preservation of lysozyme activity was only 23%, and lactoferrin and immunoglobulin G exhibited a significant loss of 70% and 77%, respectively. Non-thermal treatment methods showed superior efficacy in preserving the active components in whey proteins compared with heat treatment. Ultrasonic treatment has demonstrated a notable capability in diminishing protein particle size and turbidity, and UV treatment has been observed to have the ability to oxidize internal disulfide bonds within proteins, consequently augmenting the presence of free sulfhydryl groups, which were beneficial to foaming and emulsification stability. This study not only offers a scientific basis for the processing and application of DWP but also serves as a guide to produce dairy products, aiding in the development of dairy products tailored to specific health functions.

A Review on Concrete Structural Properties and Damage Evolution Monitoring Techniques.

Concrete structures have emerged as some of the most extensively utilized materials in the construction industry due to their inherent plasticity and high-strength characteristics. However, due to the temperature fluctuations, humidity, and damage caused by human activities, challenges such as crack propagation and structural failures pose threats to the safety of people's lives and property. Meanwhile, conventional non-destructive testing methods are limited to defect detection and lack the capability to provide real-time monitoring and evaluating of concrete structural stability. Consequently, there is a growing emphasis on the development of effective techniques for monitoring the health of concrete structures, facilitating prompt repairs and mitigation of potential instabilities. This paper comprehensively presents traditional and novel methods for concrete structural properties and damage evolution monitoring, including emission techniques, electrical resistivity monitoring, electromagnetic radiation method, piezoelectric transducers, ultrasonic techniques, and the infrared thermography approach. Moreover, the fundamental principles, advantages, limitations, similarities and differences of each monitoring technique are extensively discussed, along with future research directions. Each method has its suitable monitoring scenarios, and in practical applications, several methods are often combined to achieve better monitoring results. The outcomes of this research provide valuable technical insights for future studies and advancements in the field of concrete structural health monitoring.

Design Principle for Tetrahedral Semiconductors and Their Functional Derivatives: Cation Stabilizing Charged Cluster Network.

Colloidal quantum dots (QDs) of groups II-VI and III-V are key ingredients for next-generation light-emitting devices. Yet, many of them are heavy-element-containing or indirect bandgap, causing limited choice of environmental friendly efficient light-emitting materials. Herein, we resolve this issue by exploring potential derivatives of the parent semiconductors, thus expanding the material space. The key to success is the discovery of a principle for designing those materials, namely, cation stabilizing charged cluster network. Guided by this principle, three novel categories of cubic materials have been predicted, namely, porous binary compounds, I-II-VI ternary compounds, and I-II-III-V quaternary compounds. Using first-principles calculations, 65 realistic highly stable candidate materials have been theoretically screened. Their structural and compositional diversity enables a wide tunability of emitting wavelength from far-infrared to ultraviolet region. This work enriches the family of tetrahedral semiconductors and derivatives, which may be of interest for a broad field of optoelectronic applications.

Inulin-Coated ZnO Nanoparticles: A Correlation between Preparation and Properties for Biostimulation Purposes.

Within the framework of plant biostimulation, a pivotal role is played by the achievement of low-cost, easily prepared nanoparticles for priming purposes. Therefore, in this report, two different synthetic strategies are described to engineer zinc oxide nanoparticles with an inulin coating. In both protocols, i.e., two-step and gel-like one-pot protocols, nanoparticles with a highly pure ZnO kernel are obtained when the reaction is carried out at T ≥ 40 °C, as ascertained by XRD and ATR/FTIR studies. However, a uniformly dispersed, highly homogeneous coating is achieved primarily when different temperatures, i.e., 60 °C and 40 °C, are employed in the two phases of the step-wise synthesis. In addition, a different binding mechanism, i.e., complexation, occurs in this case. When the gel-like process is employed, a high degree of coverage by the fructan is attained, leading to micrometric coated aggregates of nanometric particles, as revealed by SEM investigations. All NPs from the two-step synthesis feature electronic bandgaps in the 3.25-3.30 eV range in line with previous studies, whereas the extensive coating causes a remarkable 0.4 eV decrease in the bandgap. Overall, the global analysis of the investigations indicates that the samples synthesized at 60 °C and 40 °C are the best suited for biostimulation. Proof-of-principle assays upon Vicia faba seed priming with Zn5 and Zn5@inu indicated an effective growth stimulation of seedlings at doses of 100 mgKg-1, with concomitant Zn accumulation in the leaves.

Nanoarchitectonics and Biological Properties of Nanocomposite Thermosensitive Chitosan Hydrogels Obtained with the Use of Uridine 5'-Monophosphate Disodium Salt.

Currently, an important group of biomaterials used in the research in the field of tissue engineering is thermosensitive chitosan hydrogels. Their main advantage is the possibility of introducing their precursors (sols) into the implantation site using a minimally invasive method-by injection. In this publication, the results of studies on the new chitosan structures in the form of thermosensitive hydrogels containing graphene oxide as a nanofiller are presented. These systems were prepared from chitosan lactate and chitosan chloride solutions with the use of a salt of pyrimidine nucleotide-uridine 5'-monophosphate disodium salt-as the cross-linking agent. In order to perform the characterization of the developed hydrogels, the sol-gel transition temperature of the colloidal systems was first determined based on rheological measurements. The hydrogels were also analyzed using FTIR spectroscopy and SEM. Biological studies assessed the cytotoxicity (resazurin assay) and genotoxicity (alkaline version of the comet assay) of the nanocomposite chitosan hydrogels against normal human BJ fibroblasts. The conducted research allowed us to conclude that the developed hydrogels containing graphene oxide are an attractive material for potential use as scaffolds for the regeneration of damaged tissues.

Density Functional Theory Unveils the Secrets of SiAuF3 and SiCuF3: Exploring Their Striking Structural, Electronic, Elastic, and Optical Properties.

In the quest for advanced materials with diverse applications in optoelectronics and energy storage, we delve into the fascinating world of halide perovskites, focusing on SiAuF3 and SiCuF3. Employing density functional theory (DFT) as our guiding light, we conduct a comprehensive comparative study of these two compounds, unearthing their unique structural, electronic, elastic, and optical attributes. Structurally, SiAuF3 and SiCuF3 reveal their cubic nature, with SiCuF3 demonstrating superior stability and a higher bulk modulus. Electronic investigations shed light on their metallic behavior, with Fermi energy levels marking the boundary between valence and conduction bands. The band structures and density of states provide deeper insights into the contributions of electronic states in both compounds. Elastic properties unveil the mechanical stability of these materials, with SiCuF3 exhibiting increased anisotropy compared to SiAuF3. Our analysis of optical properties unravels distinct characteristics. SiCuF3 boasts a higher refractive index at lower energies, indicating enhanced transparency in specific ranges, while SiAuF3 exhibits heightened reflectivity in select energy intervals. Further, both compounds exhibit remarkable absorption coefficients, showcasing their ability to absorb light at defined energy thresholds. The energy loss function (ELF) analysis uncovers differential absorption behavior, with SiAuF3 absorbing maximum energy at 6.9 eV and SiCuF3 at 7.2 eV. Our study not only enriches the fundamental understanding of SiAuF3 and SiCuF3 but also illuminates their potential in optoelectronic applications. These findings open doors to innovative technologies harnessing the distinctive qualities of these halide perovskite materials. As researchers seek materials that push the boundaries of optoelectronics and energy storage, SiAuF3 and SiCuF3 stand out as promising candidates, ready to shape the future of these fields.

Study of the Structure and Bioactivity of Polysaccharides from Different Parts of Stemona tuberosa Lour.

The polysaccharides from Stemona tuberosa Lour, a kind of plant used in Chinese herbal medicine, have various pharmacological activities, such as anti-inflammatory and antioxidant properties. However, the effects of the extraction methods and the activity of polysaccharides from different parts are still unknown. Therefore, this study aimed to evaluate the effects of different extraction methods on the yields, chemical compositions, and bioactivity of polysaccharides extracted from different parts of Stemona tuberosa Lour. Six polysaccharides were extracted from the leaves, roots, and stems of Stemona tuberosa Lour through the use of hot water (i.e., SPS-L1, SPS-R1, and SPS-S1) and an ultrasound-assisted method (i.e., SPS-L2, SPS-R2, and SPS-S2). The results showed that the physicochemical properties, structural properties, and biological activity of the polysaccharides varied with the extraction methods and parts. SPS-R1 and SPS-R2 had higher extraction yields and total sugar contents than those of the other SPSs (SPS-L1, SPS-L2, SPS-S1, and SPS-S2). SPS-L1 had favorable antioxidant activity and the ability to downregulate MUC5AC expression. An investigation of the anti-inflammatory properties showed that SPS-R1 and SPS-R2 had greater anti-inflammatory activities, while SPS-R2 demonstrated the strongest anti-inflammatory potential. The results of this study indicated that SPS-L1 and SPS-L2, which were extracted from non-medicinal parts, may serve as potent natural antioxidants, but further study is necessary to explore their potential applications in the treatment of diseases. The positive anti-inflammatory effects of SPS-R1 and SPS-R2 in the roots may be further exploited in drugs for the treatment of inflammation.

Effects of airflow superfine pulverization on the structure, functional properties, and flavor quality of wheat bran.

BACKGROUND: Wheat bran (WB) is a byproduct of refined wheat flour production with poor edible taste and low economic value. Herein, the WB was micronized via airflow superfine pulverization (ASP), and the effects of the ASP conditions on its particle size, nutritive compositions, whiteness, hydration characteristics, moisture distribution, microstructure, cation exchange capacity, volatile flavor components, and other characteristics were investigated. RESULTS: Reducing the rotational speed of the ASP screw and increasing the number of pulverizations significantly decreased the median particle size Dx(50) of WB to a minimum of 12.97 ± 0.19 µm (P < 0.05), increased the soluble dietary fiber content from 55.05 ± 2.94 to 106.86 ± 1.60 mg g-1, and improved the whiteness and water solubility index. In addition, the water holding capacity and oil holding capacity were significantly reduced (P < 0.05), while the cation exchange and swelling capacities first increased and then decreased. Up to about 70% of water in WB exists as bound water. As the Dx(50) of WB decreased, the content of bound and immobile water increased, while the free water decreased from 14.37 ± 1.21% to 7.59 ± 1.03%. Furthermore, WB was micronized and the particles became smaller and more evenly distributed. Using gas chromatography-ion mobility spectrometry, a total of 37 volatile compounds in micronized WB (including 10 aldehydes, 9 esters, 7 alcohols, and several acids, furans, ethers, aldehydes, esters, and alcohols) were identified as the main volatile compounds of WB. CONCLUSION: Collectively, ASP improved the physicochemical properties of WB. This study provides theoretical references for the use of ASP to improve the utilization and edibility of WB. © 2024 Society of Chemical Industry.

Removal of proteins and lipids affects structure, in vitro digestion and physicochemical properties of rice flour modified by heat-moisture treatment.

BACKGROUND: The objective of this experiment was to investigate the role of endogenous proteins and lipids in the structural and physicochemical properties of starch in heat-moisture treatment (HMT) rice flour and to reveal their effect on starch digestibility under heat. RESULTS: The findings indicate that, in the absence of endogenous proteins and lipids acting as a physical barrier, especially proteins, the interaction between rice flour and endogenous proteins and lipids diminished. This reduction led to fewer starch-protein inclusion complexes and starch-lipid complexes, altering the granule aggregation structure of rice flour. It resulted in a decrease in particle size, an increase in agglomeration between starch granules, and more surface cracking on rice granules. Under HMT conditions with a moisture content of 30%, slight gelatinization of the starch granules occurred, contributing to an increased starch hydrolysis rate. In addition, the elevated thermal energy effect of HMT enhanced interactions between starch molecular chains. These resulted in a decrease in crystallinity, short-range ordering, and the content of double-helix structure within starch granules. These structural transformations led to higher pasting temperatures, improved hot and cold paste stability, and a decrease in peak viscosity, breakdown, setback, and enthalpy of pasting of the starch granules. CONCLUSION: The combined analysis of microstructure, physicochemical properties, and in vitro digestion characteristics has enabled us to further enhance our understanding of the interaction mechanisms between endogenous proteins, lipids, and starches during HMT. © 2024 Society of Chemical Industry.

Extrusion modification of prolamins from distiller's grains to facilitate the construction of biopolymer films.

BACKGROUND: Distiller's grains (DGs), which are rich in natural ingredients such as prolamins, are often used as low-value feed or discarded directly, resulting in great environmental pollution and resource waste. Prolamins from DGs (PDGs) were found to be a potential material for the construction of biopolymer films due to their good film-forming properties. In this study, extrusion processing was conducted to modify the physicochemical and structural properties of PDGs to facilitate the construction of biopolymer films with superior characteristics. RESULTS: Results indicated that extrusion led to improved solubility (17.91% to 39.95%) and increased disulfide bonds (1.46 to 6.13 µmol g-1) in PDGs. The total and sulfur amino acid contents of extruded PDGs were increased by 13.26% and 38.83%, respectively. New aggregation patterns were formed after extrusion according to the results of scanning electron microscopy, Fourier transform infrared spectroscopy and X-ray diffraction. Extrusion resulted in reduced surface hydrophobicity of PDGs (10 972 to 3632), sufficient evidence for which could be also found from structure analyses of PDGs. Finally, PDGs extruded at 110 °C were found to facilitate the forming of biopolymer films with superior mechanical properties, water resistance and thermal stability. CONCLUSIONS: Physicochemical and structural properties of PDGs were effectively modified by extrusion processing, and extrusion modification of PDGs could be a great way to facilitate the construction of biopolymer films with superior characteristics. It could provide more possibilities to extend the applications of DGs to alleviate the problems of environmental pollution and resource waste. © 2024 Society of Chemical Industry.

Effects of the Jokela type of spinal muscular atrophy-related G66V mutation on the structural ensemble characteristics of CHCHD10.

The G66V pathological variant of the coiled-coil-helix-coiled-coil-helix domain-containing protein 10 (CHCHD10), mitochondrial, plays a role in Jokela type spinal muscular atrophy. The wild-type and G66V mutant-type CHCHD10 proteins contain intrinsically disordered regions, and therefore, their structural ensemble studies have been experiencing difficulties using conventional tools. Here, we show our results regarding the first characterization of the structural ensemble characteristics of the G66V mutant form of CHCHD10 and the first comparison of these characteristics with the structural ensemble properties of wild-type CHCHD10. We find that the structural properties, potential of mean force surfaces, and principal component analysis show stark differences between these two proteins. These results are important for a better pathology, biochemistry and structural biology understanding of CHCHD10 and its G66V genetic variant and it is likely that these reported structural properties are important for designing more efficient treatments for the Jokela type of spinal muscular atrophy disease.

Recent advances in the influences of drying technologies on physicochemical properties and biological activities of plant polysaccharides.

Plant polysaccharides, as significant functional macromolecules with diverse biological properties, are currently receiving increasing attention. Drying technologies play a pivotal role in the research, development, and application of various foods and plant polysaccharides. The chemical composition, structure, and function of extracted polysaccharides are significantly influenced by different drying technologies (e.g., microwave, infrared, and radio frequency) and conditions (e.g., temperature). This study discusses and compares the principles, advantages, disadvantages, and effects of different drying processes on the chemical composition as well as structural and biological properties of plant polysaccharides. In most plant-based raw materials, molecular degradation, molecular aggregation phenomena along with intermolecular interactions occurring within cell wall components and cell contents during drying represent primary mechanisms leading to variations in chemical composition and structures of polysaccharides. These differences further impact their biological properties. The biological properties of polysaccharides are determined by a combination of multiple relevant factors rather than a single factor alone. This review not only provides insights into selecting appropriate drying processes to obtaining highly bioactive plant polysaccharides but also offers a fundamental theoretical basis for the structure-function relationship of these compounds.

Influences of Trypsin Pretreatment on the Structures, Composition, and Functional Characteristics of Skin Gelatin of Tilapia, Grass Carp, and Sea Perch.

Fish skin gelatin is an important functional product in the food, cosmetics, and biomedicine industries, and establishing a green and effective fish skin gelatin extraction method is an effective way to obtain high-quality gelatin and improve its production efficiency. In this study, a trypsin method was used to extract the skin gelatin of sea perch, tilapia, and grass carp, and the microstructures of skin gelatin of these three fish species were analyzed, with such functional characteristics as thermal stability, gel strength, and emulsifying properties measured. The study results show that the skin gelatin of sea perch and tilapia obtained through the trypsin method has a relatively big molecular mass, a dense network structure, and a stable trihelix conformation. In addition, the skin gelatin of these three fish species has a relatively high ß-turn content in the secondary structure, good gel strength, and water absorption properties. The compositions of the collagen-associated proteins in the skin gelatins of these three fish species extracted with the trypsin method are significantly different from each other, with positive effects of decorin and biglycan on the stability of the network structure of gelatin and a certain damaging effect of metalloendopeptidase on the network structure of gelatin. The skin gelatin of tilapia has high thermal stability and good emulsifying performance. Therefore, this gelatin type has bright application prospects in such fields as food processing, cosmetics, and drug development. In contrast, the skin gelatin of grass carp has poor functional properties. Therefore, there are significant differences among the structures and functions of skin gelatin extracted from different kinds of fish through the trypsin method. This finding has provided a useful reference for the production of customized fish gelatin according to demand.

Microwave-assisted synthesis of praseodymium (Pr)-doped ZnS QDs such as nanoparticles for optoelectronic applications.

Praseodymium (Pr)-doped ZnS nanoparticles were synthesized using a low-cost microwave-assisted technique and investigations on their structure, morphology, optical properties, Raman resonance, dielectric properties, and luminescence were conducted. Broad X-ray diffraction peaks suggested the formation of low-dimensional Pr-doped ZnS nanoparticles with a cubic structure that was validated using transmission electron microscopy (TEM)/high-resolution TEM analysis. The energy gaps were identified using diffuse reflectance spectroscopy and it was found that the values varied between 3.54eV and 3.61eV for different samples. Vibrational experiments on Pr-doped ZnS nanoparticles revealed significant Raman modes at ~270 and ~350 cm-1 that were associated with optical phonon modes that are shifted to lower wavenumbers, indicating phonon confinement in the synthesized products. The photoluminescence (PL) spectra of all samples demonstrated that the pure and Pr-doped ZnS nanoparticles were three-level laser active materials. Energy-dispersive X-ray spectroscopy and mapping study confirmed the homogeneous presence of Pr in ZnS. TEM studies showed that the particles were of very small size and in the cubic phase. The samples had high dielectric constant values between 13 and 24 and low loss values, according to the dielectric analysis. With an increase in frequency and a change in the Pr content of ZnS, an intense peak could be seen in the PL spectra at a wavelength of 360 nm, and some other peaks observed corresponded to the transition of Pr3+ . The produced nanoparticles were appropriate for optoelectronic applications due to their short dimension, high energy gap, high dielectric constant, and low loss values.

Thermal, structural, optical, and photon shielding studies of cerium-doped barium tellurite glasses.

A series of tellurite-based glasses are prepared by using a melt-quenching method. The effect of cerium on the physical, thermal, structural, optical, spectroscopic, and shielding properties of barium tellurite glass samples is studied. It has been observed that the thermal stability factor increases with increasing cerium ion (Ce3+ ) concentration. The density and other physical parameters such as ion concentration and molar volume are calculated using the Archimedes principle. An increase in optical band gap and density suggests a decrement in non-bridging oxygens. These results are in accordance with Raman results. The blue emission in prepared glasses is studied in terms of International Commission on Illumination chromaticity coordinates. Moreover, various shielding properties such as mass attenuation coefficient, linear attenuation coefficient, effective atomic number, half-value layer, and tenth-value layer have also been determined to understand the photon shielding characteristics of as-prepared glass samples.

Tellurite Glasses from the 70TeO2-5XO-10P2O5-10ZnO-5PbF2(X= Pb, Bi, Ti) System Doped Erbium Ions-The Influence of Erbium on the Structure and Physical Properties.

In this article, we present research on the influence of erbium ions on the structure and magneto-optical properties of 70TeO2-5XO-10P2O5-10ZnO-5PbF2 (X = Pb, Bi, Ti) tellurite glass systems. Structural changes occurring in the glasses during doping with erbium ions were investigated using positron annihilation lifetime spectroscopy (PALS) and Raman spectroscopy. The X-ray diffraction (XRD) method was used to confirm the amorphous structure of the investigated samples. Based on the Faraday effect measurements and calculated values of Verdet constant, the magneto-optical properties of the glasses were determined.

Study of the Properties of CdS:Al (R = [Al3+]/[Cd2+] = 0.30, 0.40, 0.50) Thin Films Grown by the CBD Method in an Ammonia-Free System.

CdS:Al thin films were fabricated on a glass substrate using the CBD method. The effect of aluminum incorporation on the structural, morphological, vibrational, and optical properties of CdS thin layers was investigated by X-ray diffraction (XRD), Raman spectroscopy (RS), atomic force microscopy (AFM), scanning electron microscopy (SEM), and UV-visible (UV-vis) and photoluminescence (PL) spectroscopies. XRD analysis of deposited thin films confirmed a hexagonal structure with a preferred (002) orientation in all samples. The crystallite size and surface morphology of the films are modified with aluminum content. Raman spectra exhibit fundamental longitudinal optical (LO) vibrational modes and their overtones. Optical properties were studied for each thin film. Here, it was observed that the optical properties of thin films are affected by the incorporation of aluminum into the CdS structure.