Achieving atomically ordered GaN/AlN quantum heterostructures: The role of surface polarity.

Interface engineering in heterostructures at the atomic scale has been a central research focus of nanoscale and quantum material science. Despite its paramount importance, the achievement of atomically ordered heterointerfaces has been severely limited by the strong diffusive feature of interfacial atoms in heterostructures. In this work, we first report a strong dependence of interfacial diffusion on the surface polarity. Near-perfect quantum interfaces can be readily synthesized on the semipolar plane instead of the conventional c-plane of GaN/AlN heterostructures. The chemical bonding configurations on the semipolar plane can significantly suppress the cation substitution process as evidenced by first-principles calculations, which leads to an atomically sharp interface. Moreover, the surface polarity of GaN/AlN can be readily controlled by varying the strain relaxation process in core-shell nanostructures. The obtained extremely confined, interdiffusion-free ultrathin GaN quantum wells exhibit a high internal quantum efficiency of ~75%. Deep ultraviolet light-emitting diodes are fabricated utilizing a scalable and robust method and the electroluminescence emission is nearly free of the quantum-confined Stark effect, which is significant for ultrastable device operation. The presented work shows a vital path for achieving atomically ordered quantum heterostructures for III-nitrides as well as other polar materials such as III-arsenides, perovskites, etc.

Crystallographic Effects of GaN Nanostructures in Photoelectrochemical Reaction.

Tuning the surface structure of the photoelectrode provides one of the most effective ways to address the critical challenges in artificial photosynthesis, such as efficiency, stability, and product selectivity, for which gallium nitride (GaN) nanowires have shown great promise. In the GaN wurtzite crystal structure, polar, semipolar, and nonpolar planes coexist and exhibit very different structural, electronic, and chemical properties. Here, through a comprehensive study of the photoelectrochemical performance of GaN photocathodes in the form of films and nanowires with controlled surface polarities we show that significant photoelectrochemical activity can be observed when the nonpolar surfaces are exposed in the electrolyte, whereas little or no activity is measured from the GaN polar c-plane surfaces. The atomic origin of this fundamental difference is further revealed through density functional theory calculations. This study provides guideline on crystal facet engineering of metal-nitride photo(electro)catalysts for a broad range of artificial photosynthesis chemical reactions.

Surface-Polarity-Induced Spatial Charge Separation Boosts Photocatalytic Overall Water Splitting on GaN Nanorod Arrays.

Photocatalytic overall water splitting has been recognized as a promising approach to convert solar energy into hydrogen. However, most of the photocatalysts suffer from low efficiencies mainly because of poor charge separation. Herein, taking a model semiconductor gallium nitride (GaN) as an example, we uncovered that photogenerated electrons and holes can be spatially separated to the nonpolar and polar surfaces of GaN nanorod arrays, which is presumably ascribed to the different surface band bending induced by the surface polarity. The photogenerated charge separation efficiency of GaN can be enhanced significantly from about 8 % to more than 80 % via co-exposing polar and nonpolar surfaces. Furthermore, spatially assembling reduction and oxidation cocatalysts on the nonpolar and polar surfaces remarkably boosts photocatalytic overall water splitting, with the quantum efficiency increased from 0.9 % for the film photocatalyst to 6.9 % for the nanorod arrays photocatalyst.

Thermodynamics of DNA: heat capacity changes on duplex unfolding.

The heat capacity change, ΔCp, accompanying the folding/unfolding of macromolecules reflects their changing state of hydration. Thermal denaturation of the DNA duplex is characterized by an increase in ΔCp but of much lower magnitude than observed for proteins. To understand this difference, the changes in solvent accessible surface area (ΔASA) have been determined for unfolding the B-form DNA duplex into disordered single strands. These showed that the polar component represents ~ 55% of the total increase in ASA, in contrast to globular proteins of similar molecular weight for which the polar component is only about 1/3rd of the total. As the exposure of polar surface results in a decrease of ΔCp, this explains the much reduced heat capacity increase observed for DNA and emphasizes the enhanced role of polar interactions in maintaining duplex structure. Appreciation of a non-zero ΔCp for DNA has important consequences for the calculation of duplex melting temperatures (Tm). A modified approach to Tm prediction is required and comparison is made of current methods with an alternative protocol.

The Effect of Alkyl Chain Length in Organic Semiconductor and Surface Polarity of Polymer Dielectrics in Organic Thin-Film Transistors (OTFTs).

The interface between dielectric and organic semiconductor is critically important in determining organic thin-film transistor (OTFT) performance. Surface polarity of the dielectric layer can hinder charge transport characteristics, which has restricted utilization of polymeric dielectric materials containing polar functional groups. Herein, the electrical characteristics of OTFTs are analyzed depending on the alkyl chain length of organic semiconductors and surface polarity of polymer dielectrics. High-performance dibenzothiopheno[6,5-b:6',5'-f]thieno[3,2-b]thiophene (DBTTT) and newly synthesized its alkylated derivatives (C6-DBTTT and C10-DBTTT) are utilized as organic semiconductors. As dielectric layers, non-polar poly(1,3,5-trimethyl-1,3,5-trivinylcyclitrisiloxane) (pV3D3) and poly(2-cyanoethyl acrylate-co-diethylene glycol divinyl ether) [p(CEA-co-DEGDVE)] with polar cyanide functionality are utilized. The fabricated OTFTs with pV3D3 commonly exhibit the excellent charge transport characteristics. In addition, the OTFT performance is improved with lengthening the alkyl chain in organic semiconductors, which can be attributed to the molecular orientation of semiconductors. On the other hand, non-alkylated DBTTT OTFTs with polar p(CEA-co-DEGDVE) show relatively poor electrical characteristics, while their performance is drastically enhanced with the alkylated DBTTTs. The ultraviolet photoelectron spectroscopy (UPS) reveals that surface polarity of the dielectric layer can be abated with alkyl chain in organic semiconductors. It is believed that this study can provide a useful insight to optimize dielectric/semiconductor interface to achieve high-performance OTFTs.

Electric Control of Helicity-Dependent Photocurrent and Surface Polarity Detection on Two-Dimensional Bi2O2Se Nanosheets.

Bismuth oxyselenide (Bi2O2Se) is a two-dimensional (2D) layered semiconductor material with high electron Hall mobility and excellent environmental stability as well as strong spin-orbit interaction (SOI), which has attracted intense attention for application in spintronic and spin optoelectronic devices. However, a comprehensive study of spin photocurrent and its microscopic origin in Bi2O2Se is still missing. Here, the helicity-dependent photocurrent (HDPC) was investigated in Bi2O2Se nanosheets. By analyzing the dependence of HDPC on the angle of incidence, we find that the HDPC originates from surface states with Cs symmetry in Bi2O2Se, which can be attributed to the circular photogalvanic effect (CPGE) and circular photon drag effect (CPDE). It is revealed that the HDPC current almost changes linearly with the source-drain voltage. Furthermore, we demonstrate effective tuning of HDPC in Bi2O2Se by ionic liquid gating, indicating that the spin splitting of the surface electronic structure is effectively tuned. By analyzing the gate voltage dependence of HDPC, we can unambiguously identify the surface polarity and the surface electronic structure of Bi2O2Se. The large HDPC in Bi2O2Se nanosheets and its efficient electrical tuning demonstrate that 2D Bi2O2Se nanosheets may provide a good platform for opto-spintronics devices.

Structure, Properties, and Phase Transformations of Water Nanoconfined between Brucite-like Layers: The Role of Wall Surface Polarity.

The interaction of water with confining surfaces is primarily governed by the wetting properties of the wall material-in particular, whether it is hydrophobic or hydrophilic. The hydrophobicity or hydrophilicity itself is determined primarily by the atomic structure and polarity of the surface groups. In the present work, we used molecular dynamics to study the structure and properties of nanoscale water layers confined between layered metal hydroxide surfaces with a brucite-like structure. The influence of the surface polarity of the confining material on the properties of nanoconfined water was studied in the pressure range of 0.1-10 GPa. This pressure range is relevant for many geodynamic phenomena, hydrocarbon recovery, contact spots of tribological systems, and heterogeneous materials under extreme mechanical loading. Two phase transitions were identified in water confined within 2 nm wide slit-shaped nanopores: (1) at p1 = 3.3-3.4 GPa, the liquid transforms to a solid phase with a hexagonal close-packed (HCP) crystal structure, and (2) at p2 = 6.7-7.1 GPa, a further transformation to face-centered cubic (FCC) crystals occurs. It was found that the behavior of the confined water radically changes when the partial charges (and, therefore, the surface polarity) are reduced. In this case, water transforms directly from the liquid phase to an FCC-like phase at 3.2-3.3 GPa. Numerical simulations enabled determination of the amount of hydrogen bonding and diffusivity of nanoconfined water, as well as the relationship between pressure and volumetric strain.

Cotton and Flax Textiles Leachables Impact Differently Cutaneous Staphylococcus aureus and Staphylococcus epidermidis Biofilm Formation and Cytotoxicity.

Bacteria can bind on clothes, but the impacts of textiles leachables on cutaneous bacteria remain unknown. Here, we studied for the first time the effects of cotton and flax obtained through classical and soft ecological agriculture on the representatives S. aureus and S. epidermidis bacteria of the cutaneous microbiota. Crude flax showed an inhibitory potential on S. epidermidis bacterial lawns whereas cotton had no effect. Textile fiber leachables were produced in bacterial culture media, and these extracts were tested on S. aureus and S. epidermidis. Bacterial growth was not impacted, but investigation by the crystal violet technique and confocal microscopy showed that all extracts affected biofilm formation by the two staphylococci species. An influence of cotton and flax culture conditions was clearly observed. Flax extracts had strong inhibitory impacts and induced the formation of mushroom-like defense structures by S. aureus. Conversely, production of biosurfactant by bacteria and their surface properties were not modified. Resistance to antibiotics also remained unchanged. All textile extracts, and particularly soft organic flax, showed strong inhibitory effects on S. aureus and S. epidermidis cytotoxicity on HaCaT keratinocytes. Analysis of flax leachables showed the presence of benzyl alcohol that could partly explain the effects of flax extracts.

Acne and Stress: Impact of Catecholamines on Cutibacterium acnes.

Cutibacterium acnes (former Propionibacterium acnes), is a bacterium characterized by high genomic variability, consisting of four subtypes and six major ribotypes. Skin is the largest neuroendocrine organ of the human body and many cutaneous hormones and neurohormones can modulate bacterial physiology. Here, we investigated the effect of catecholamines, i.e., epinephrine and norepinephrine, on two representative strains of C. acnes, of which the genome has been fully sequenced, identified as RT4 acneic and RT6 non-acneic strains. Epinephrine and norepinephrine (10-6 M) had no impact on the growth of C. acnes but epinephrine increased RT4 and RT6 biofilm formation, as measured by crystal violet staining, whereas norepinephrine was only active on the RT4 strain. We obtained the same results by confocal microscopy with the RT4 strain, whereas there was no effect of either catecholamine on the RT6 strain. However, this strain was also sensitive to catecholamines, as shown by MATs tests, as epinephrine and norepinephrine affected its surface polarity. Flow cytometry studies revealed that epinephrine and norepinephrine are unable to induce major changes of bacterial surface properties and membrane integrity. Exposure of sebocytes to control or catecholamine-treated bacteria showed epinephrine and norepinephrine to have no effect on the cytotoxic or inflammatory potential of either C. acnes strains but to stimulate their effect on sebocyte lipid synthesis. Uriage thermal spring water was previously shown to inhibit biofilm production by C. acnes. We thus tested its effect after exposure of the bacteria to epinephrine and norepinephrine. The effect of the thermal water on the response of C. acnes to catecholamines depended on the surface on which the biofilm was grown. Finally, an in-silico study revealed the presence of a protein in the genome of C. acnes that shows homology with the catecholamine receptor of Escherichia coli and eukaryotes. This study suggests that C. acnes may play a role as a relay between stress mediators (catecholamines) and acne.

Adaptation of acneic and non acneic strains of Cutibacterium acnes to sebum-like environment.

Cutibacterium acnes, former Proprionibacterium acnes, is a heterogeneous species including acneic bacteria such as the RT4 strain, and commensal bacteria such as the RT6 strain. These strains have been characterized by metagenomic analysis but their physiology was not investigated until now. Bacteria were grown in different media, brain heart infusion medium (BHI), reinforced clostridial medium (RCM), and in sebum like medium (SLM) specifically designed to reproduce the lipid rich environment of the sebaceous gland. Whereas the RT4 acneic strain showed maximal growth in SLM and lower growth in RCM and BHI, the RT6 non acneic strain was growing preferentially in RCM and marginally in SLM. These differences were correlated with the lipophilic surface of the RT4 strain and to the more polar surface of the RT6 strain. Both strains also showed marked differences in biofilm formation activity which was maximal for the RT4 strain in BHI and for the RT6 strain in SLM. However, cytotoxicity of both strains on HaCaT keratinocytes remained identical and limited. The RT4 acneic strain showed higher inflammatory potential than the RT6 non acneic strain, but the growth medium was without significant influence. Both bacteria were also capable to stimulate ß-defensine 2 secretion by keratinocytes but no influence of the bacterial growth conditions was observed. Comparative proteomics analysis was performed by nano LC-MS/MS and revealed that whereas the RT4 strain only expressed triacylglycerol lipase, the principal C. acnes virulence factor, when it was grown in SLM, the RT6 strain expressed another virulence factor, the CAMP factor, exclusively when it was grown in BHI and RCM. This study demonstrates the key influence of growth conditions on virulence expression by C. acnesand suggest that acneic and non acneic strains are related to different environmental niches.

Effect of two cosmetic compounds on the growth, biofilm formation activity, and surface properties of acneic strains of Cutibacterium acnes and Staphylococcus aureus.

Increasing popularity of preservative-free cosmetics necessitates in-depth research, specifically as bacteria can react to local factors by important metabolic changes. In this respect, investigating the effect of cosmetic preparations on pathogenic strains of commensal species such as acneic forms of Cutibacterium acnes (former Propionibacterium acnes) and bacteria behaving both as commensals and opportunistic pathogens such as Staphylococcus aureus is of major interest. In this study, we studied the effect of commonly used cosmetics, Uriage™ thermal water (UTW) and a rhamnose-rich polysaccharide (PS291® ) on RT4 and RT5 acneic strains of C. acnes and a cutaneous strain of S. aureus. UTW affected the growth kinetic of acneic C. acnes essentially by increasing its generation time and reducing its biomass, whereas only the S. aureus final biomass was decreased. PS291 had more marginal effects. Both compounds showed a marked antibiofilm activity on C. acnes and S. aureus. For S. aureus that appeared essentially due to inhibition of initial adhesion. Cosmetics did not modify the metabolic activity of bacteria. Both C. acnes and S. aureus showed marked hydrophobic surface properties. UTW and PS291 had limited effect on C. acnes but increased the hydrophobic character of S. aureus. This work underlines the effect of cosmetics on cutaneous bacteria and the potential limitations of preservative-free products.

Characterization and phenanthrene sorption of organic matter fractions isolated from organic and mineral soils.

Sorption of phenanthrene (PHE) to humic acid (HA) and humin (HM) fractions isolated from organic and mineral soils was investigated to better understand sorption processes in varying soil types. Samples were characterized by elemental analysis, X-ray photoelectron spectroscopy, 13C nuclear magnetic resonance, and CO2 adsorption. No clear correlation was found between the distribution coefficient (Kd) and the bulk polarity of the soil organic matters (SOMs). By contrast, PHE Kd values generally increased with increasing surface polarity of the tested SOMs, implying that surface polarity may play a more important role in PHE sorption than the bulk one. The organic carbon (OC)-normalized Kd values (Koc) of HMs were higher than those of HAs as a result of the higher aliphatic C contents of HMs. For SOMs isolated from mineral soil (MI-SOMs), part of the aliphatic domains may be tightly associated with minerals and were not accessible to PHE molecules, resulting in lower PHE Koc values of MI-SOMs than the corresponding fractions extracted from the organic soil. This study implies that both chemical characteristics and physical conformation of SOMs are paramount considerations when investigating sorption process of hydrophobic organic compounds in soils.

Sorption of four hydrophobic organic contaminants by biochars derived from maize straw, wood dust and swine manure at different pyrolytic temperatures.

Sorption behavior of acetochlor (ACE), dibutyl phthalate (DBP), 17α-Ethynyl estradiol (EE2) and phenanthrene (PHE) with biochars produced from three feedstocks (maize straw (MABs), pine wood dust (WDBs) and swine manure (SWBs)) at seven heat treatment temperatures (HTTs) was evaluated. The bulk polarity of these biochars declined with increasing HTT while the aromaticity and CO2-surface area (CO2-SA) rose. The surface OC contents of biochars were generally higher than bulk OC contents. The organic carbon (OC)-normalized CO2-SA (CO2-SA/OC) of biochars significantly correlated with the sorption coefficients (n and logK(oc)), suggesting that pore filling could dominate the sorption of tested sorbates. SWBs had higher logK(oc) values compared to MABs and WDBs, due to their higher ash contents. Additionally, the logK(oc) values for MABs was relatively greater than that for WDBs at low HTTs (≤400 °C), probably resulting from the higher CO2-SA/OC, ash contents and aromaticity of MABs. Surface polarity and the aliphatic C may dominate the sorption of WDBs obtained at relatively low HTTs (≤400 °C), while aromatic C affects the sorption of biochars at high HTTs. Results of this work aid to deepen our understanding of the sorption mechanisms, which is pivotal to wise utilization of biochars as sorbents for hazardous organic compounds.

Balancing soft elasticity and low surface polarity in films of charged BSA capsules at air/fluid interface.

Interaction between charged BSA colloids and the buffer at air/fluid interface has been studied using spread films of the capsules of the protein prepared at pH 4.5 and 7.5 (below and above the pI of BSA). Surface pressure-surface concentration plots, interfacial dilational rheology and Quartz crystal microbalance with dissipation have been used to characterize the films. The study shows that below the pI of the protein, the positively charged colloids entrain more water on the surface which leads to partial neutralization of the charges. Results suggest that the charged capsules are elastic due to the strongly adsorbed protein layers that restrict deformation and any small shape fluctuations is likely due to the distortion of the viscoelastic surface layer at pH=4.5. Capsules of BSA behave as 'soft elastic membrane' with interfacial properties lying between that of an elastic membrane and a slightly soluble diffuse capsule with low interfacial tension. Such elastic capsules would find applications in drug delivery and food colloids.

Single-solute and bi-solute sorption of phenanthrene and dibutyl phthalate by plant- and manure-derived biochars.

The spatial arrangement of biochar and the exact underlying interaction mechanisms of biochar and hydrophobic organic compounds both remain largely unknown. The sorption of dibutyl phthalate (DBP) and phenanthrene (PHE) to plant- and manure-derived biochars in both single- and bi-solute systems was investigated. The significant positive relation between surface polarity and ash content suggests that minerals benefit the external distribution of polar groups on particle surfaces. PHE and DBP sorption by the biochars was regulated by their surface polarity. The PHE generally displayed a pronounced enhancement of DBP sorption, likely resulting from the formation of biochar-PHE-DBP complexes, suggesting that DBP and PHE had different sorption sites on the biochars. The enhancement of Cd(2+) (a soft Lewis acid) on DBP sorption implied that π-π interactions should not dominate DBP sorption by biochars. The influence of Cd(2+) on PHE sorption by biochars would depend on the balance between suppressive sorption by Cd(2+)PHE bonding and enhanced sorption by Cd(2+)-complexed functionalities, and the amounts of Cd(2+) adsorbed by biochars determined the relative role of increased sorption by Cd(2+) in the overall PHE sorption.