Understanding the Electronic Structure of Magnetic Trinuclear Complexes Based on the Tris-Dioxolene Triphenylene Non-Innocent Bridging Ligand, a Theoretical Study.

A complete theoretical analysis using first the simple Hückel model followed by more sophisticated multi-reference calculations on a trinuclear Ni(II) complex (Tp#Ni3 HHTP), bearing the non-innocent bridging ligand HHTP3- , is carried out. The three semiquinone moieties of HHTP3- couple antiferromagnetically and lead to a single unpaired electron localized on one of the moieties. The calculated exchange coupling integrals together with the zero-field parameters allow, when varied within a certain range, reproducing the experimental data. These results are generalized for two similar other trinuclear complexes containing Ni(II) and Cu(II). The electronic structure of HHTP3- turns out to be independent of both the chemical nature and the geometry of the metal ions. We also establish a direct correlation between the geometrical and the electronic structures of the non-innocent ligand that is consistent with the results of calculations. It allows experimentalists to get insight into the magnetic behavior of this type of complexes by an analysis of their X-ray structure.

Uniform Colloidal Polymer Rods by Stabilizer-Assisted Liquid-Crystallization-Driven Self-Assembly.

The synthesis of anisotropic colloidal building blocks is essential for their self-assembly into hierarchical materials. Here, a highly efficient stabilizer-assisted liquid-crystallization-driven self-assembly (SA-LCDSA) strategy was developed to achieve monodisperse colloidal polymer rods. This strategy does not require the use of block copolymers, but only homopolymers or random copolymers. The resulting rods have tunable size and aspect ratios, as well as well-defined columnar liquid crystal structures. The integrated triphenylene units enable the rods to exhibit unusual photo-induced fluorescence enhancement and accompanying irradiation memory effect, which, as demonstrated, are attractive for information encryption/decryption of paper documents. In particular, unwanted document decryption during delivery can be examined by fluorescence kinetics. This SA-LCDSA-based approach can be extended to synthesize other functional particles with desired π-molecular units.

Adsorption of Helium and Hydrogen on Triphenylene and 1,3,5-Triphenylbenzene.

The adsorption of helium or hydrogen on cationic triphenylene (TPL, C18H12), a planar polycyclic aromatic hydrocarbon (PAH) molecule, and of helium on cationic 1,3,5-triphenylbenzene (TPB, C24H18), a propeller-shaped PAH, is studied by a combination of high-resolution mass spectrometry and classical and quantum computational methods. Mass spectra indicate that HenTPL+ complexes are particularly stable if n = 2 or 6, in good agreement with the quantum calculations that show that for these sizes, the helium atoms are strongly localized on either side of the central carbon ring for n = 2 and on either side of the three outer rings for n = 6. Theory suggests that He14TPL+ is also particularly stable, with the helium atoms strongly localized on either side of the central and outer rings plus the vacancies between the outer rings. For HenTPB+, the mass spectra hint at enhanced stability for n = 2, 4 and, possibly, 11. Here, the agreement with theory is less satisfactory, probably because TPB+ is a highly fluxional molecule. In the global energy minimum, the phenyl groups are rotated in the same direction, but when the zero-point harmonic correction is included, a structure with one phenyl group being rotated opposite to the other two becomes lower in energy. The energy barrier between the two isomers is very small, and TPB+ could be in a mixture of symmetric and antisymmetric states, or possibly even vibrationally delocalized.

Synthesis of triphenylene-fused phosphole oxides via C-H functionalizations.

The synthesis of triphenylene-fused phosphole oxides has been achieved through two distinct C-H functionalization reactions as key steps. The phosphole ring was constructed by a three-component coupling of 3-(methoxymethoxy)phenylzinc chloride, an alkyne, and dichlorophenylphosphine, involving the regioselective C-H activation of the C2 position of the arylzinc intermediate via 1,4-cobalt migration. The resulting 7-hydroxybenzo[b]phosphole derivative was used for further π-extension through Suzuki-Miyaura couplings and a Scholl reaction, the latter closing the triphenylene ring. The absorption and emission spectra of the thus-synthesized compounds illustrated their nature as hybrids of triphenylene and benzo[b]phosphole.

An Annulative Synthetic Strategy for Building Triphenylene Frameworks by Multiple C-H Bond Activations.

C-H activation is a versatile tool for appending aryl groups to aromatic systems. However, heavy demands on multiple catalytic cycle operations and site-selectivity have limited its use for graphene segment synthesis. A Pd-catal- yzed one-step synthesis of functionalized triphenylene frameworks is disclosed, which proceeds by 2- or 4-fold C-H arylation of unactivated benzene derivatives. A Pd2 (dibenzylideneacetone)3 catalytic system, using cyclic diaryliodonium salts as π-extending agents, leads to site-selective inter- and intramolecular tandem arylation sequences. Moreover, N-substituted triphenylenes are applied to a field-effect transistor sensor for rapid, sensitive, and reversible alcohol vapor detection.

Copper Causes Regiospecific Formation of C4 F8 -Containing Six-Membered Rings and their Defluorination/Aromatization to C4 F4 -Containing Rings in Triphenylene/1,4-C4 F8 I2 Reactions.

The presence of Cu in reactions of triphenylene (TRPH) and 1,4-C4 F8 I2 at 360 °C led to regiospecific substitution of TRPH ortho C(ß) atoms to form C4 F8 -containing rings, completely suppressing substitution on C(α) atoms. In addition, Cu caused selective reductive-defluorination/aromatization (RD/A) to form C4 F4 -containing aromatic rings. Without Cu, the reactions of TRPH and 1,4-C4 F8 I2 were not regiospecific and no RD/A was observed. These results, supported by DFT calculations, are the first examples of Cu-promoted 1) regiospecific perfluoroannulation, 2) preparative C-F activation, and 3) RD/A. HPLC-purified products were characterized by X-ray diffraction, low-temperature PES, and (1) H/(19) F NMR.

Efficient blue organic light-emitting diodes using N(2) ,N(2) ,N(11) ,N(11) ,5,6,7,8-octaphenyltriphenylene-2,11-diamine derivatives.

In this study, we have synthesized phenyl-substituted triphenylene derivatives, using the Diels-Alder reaction and the Buchwald-Hartwig reaction. To investigate electroluminescence properties of these materials, multilayer organic light-emitting diode (OLED) devices were fabricated with a structure of indium-tin-oxide (ITO) (180 nm)/4,4'-bis(N-(1-naphthyl)-N-phenylamino)biphenyl (NPB) (50 nm)/blue-emitting materials (1-3) (30 nm)/bathophenanthroline (Bphen) (35 nm)/lithium quinolate (Liq) (2 nm)/Al (100 nm). A device using N(2) ,N(2) ,N(11) ,N(11) ,5,6,7-heptaphenyltriphenylene-2,11-diamine (2) exhibited efficient blue emission with luminous, power, and external quantum efficiencies of 0.92 cd/A, 0.67 lm/W, and 1.17% at 20 mA/cm(2) , respectively. The Commission International de L'Éclairage coordinates of this device were (x = 0.15, y = 0.09) at 6.0 V. Copyright © 2015 John Wiley & Sons, Ltd.

Influence of excited-state absorption on time-resolved luminescence: general formalism and application to the phosphorescence of polycyclic aromatic hydrocarbons.

The luminescence decay of a species in an absorbing medium whose optical thickness changes with time, as occurs with triplet-triplet absorption following excitation cut-off, is studied theoretically and experimentally. A general luminescence decay function based on a distribution of optical thicknesses is presented. A simple decay function previously used empirically is shown to result from an exponential distribution of optical thicknesses. The general approach introduced allows the adequate description of the phosphorescence decays of two polycyclic aromatic hydrocarbons, coronene and triphenylene (normal and perdeuterated forms for both molecules), in polymer films in the presence of excited-state absorption.

Elongation of discotic liquid crystal strands and lubricant effects.

After a short review on the physics of pulled threads and their mechanical properties, the paper reports and discusses the strand elongation of disordered columnar phases, hexagonal or lamella-columnar, of small molecules or polymers. The mechanical properties appear to be relevant to the length of the columns of molecules compared to the thread length, instead of the usual correlation length. If, taking the entanglement effect into account, the column length is short, the strand exhibits rather fluid-like properties that may even look nematic-like at the macroscopic scale. The Plateau-Rayleigh instability breaks the thread shortly thereafter. However, because the hydrodynamic objects are the columns instead of the molecules, the viscosity is anomalously large. The observations show that the strands in the columnar phases are made of filaments, or fibrils, which are bundles of columns of molecules. This explains the grooves and rings, which are observed on the antenna or bamboo-like strand profiles. On pulling a strand, the elongation stress eventually exceeds the plasticity threshold, thus breaking the columns and the filaments. As a result, cracks, more exactly, giant dislocations are formed. These change the strand thickness by steps of different birefringence colors. Interestingly, the addition of a solute may drastically change the effective viscosity of the columnar phase and its mechanical properties. Some solutes, such as alkanes, exhibit lubricant and detangling properties, whereas others such as triphenylene, are antilubricant.

NMR of guest-host systems: 8CB in chiral nematic porous glasses.

Liquid crystals confined to porous materials often have different critical phenomena and ordering than in the bulk. Through the selection of pore size, structure and guest liquid crystal, these systems could enable a variety of functional materials for applications such as sensors and displays. A recent example of such a system is chiral nematic mesoporous films infiltrated with liquid crystal 4-cyano-4'-n-octylbiphenyl (8CB), which has reversible thermal switching of its optical bandgap. The optical bandgap is lost when the ordered 8CB guests are heated above ∼50 °C, where the 8CB becomes isotropic. In this study, we have used NMR cryoporometry and pulsed-field gradient diffusion measurements to determine the pore sizes and structures of various chiral nematic mesoporous silica and organosilica films. Temperature and orientation-dependent wideline (15)N NMR spectra of films infiltrated with (15)N-labelled 8CB guests show that the ordering of the 8CB mesogens is consistent with an average orientation parallel to the chiral nematic pore axes. Inclusion of a large, orientation-dependent shift was necessary to fit the spectra, probably due to susceptibility differences between the 8CB guests and the organosilica host.

Mesomorphism Modulation of Perfluorinated Janus Triphenylenes by Inhomogeneous Chain Substitution Patterns.

Two isomeric series of compounds with "inverted" chains' substitution patterns, 7,10-dialkoxy-1,2,3,4-tetrafluoro-6,11-dimethoxytriphenylene and 6,11-dialkoxy-1,2,3,4-tetrafluoro-7,10-dimethoxytriphenylene, labelled respectively p-TPFn and m-TPFn, and two non-fluorinated homologous isomers, 3,6-dibutoxy-2,7-dimethoxytriphenylene and 2,7-dibutoxy-3,6-dimethoxytriphenylene, p-TP4 and m-TP4, respectively, were synthesized in three steps and obtained in good yields by the efficient transition-metal-free, fluoroarene nucleophilic substitution via the reaction of appropriate 2,2'-dilithium biphenylenes with either perfluorobenzene, C6 F6 , to yield p-TPFn and m-TPFn, or o-difluorobenzene, C6 H4 F2 , for p-TP4 and m-TP4, respectively. The single-crystal structures of p-TPF4, m-TPF4 and p-TP4, unequivocally confirmed that the cyclization reactions occurred at the expected positions, and that the fluorinated molecules stack up into columns with short separation, a propitious situation for the emergence of columnar mesophases. The mesomorphous properties were found to be greatly affected by both chains' length and positional isomerism: a Colhex phase is found for p-TPF4 and m-TPF4, but mesomorphism vanishes in p-TPF6, and changes for the isomeric homologs m-TPFn, with the induction for n≥6 of a lamello-columnar phase, LamColrec . As expected, both non-fluorinated compounds are deprived of mesomorphism. These compounds emit blue-violet colour in solution, independently of the chains' substitution pattern, and the absolute fluorescence quantum yields can reach up to 46 %. In thin films, fluorescence is slightly redshifted.

Synthesis and third-order nonlinear optical properties of triphenylene derivatives modified by click chemistry.

A series of asymmetric triphenylene derivatives containing typical D-π-A structures is successfully synthesized by means of [2+2] cycloaddition-cycloreversion click reactions. The photophysical and electrochemical properties, as well as the click reactions, are characterized by means of UV/Vis absorption spectroscopy, cyclic voltammetry, and DFT modulations. In addition, the third-order nonlinear properties, including the nonlinear absorption and the nonlinear susceptibilities, are investigated by using Z-scan techniques. A typical reverse saturable absorption-saturable absorption behavior is observed for the third-order nonlinear absorption, with the third-order nonlinear susceptibilities of the compounds being 1.05×10(-12) , -1.50×10(-12) , and -0.52×10(-12) esu, respectively.

Novel supramolecular affinity materials based on (-)-isosteviol as molecular templates.

The readily available ex-chiral-pool building block (-)-isosteviol was combined with the C 3-symmetric platforms hexahydroxytriphenylene and hexaaminotriptycene providing large and rigid molecular architectures. Because of the persistent cavities these scaffolds are very potent supramolecular affinity materials for head space analysis by quartz crystal microbalances. The scaffolds serve in particular as templates for tracing air-borne arenes at low concentration. The affinities of the synthesized materials towards different air-borne arenes were determined by 200 MHz quartz crystal microbalances.

Triphenylene discotic liquid crystal trimers synthesized by Co2(CO)8-catalyzed terminal alkyne [2 + 2 + 2] cycloaddition.

The synthesis of star-shaped discotic liquid crystal trimers using Co2(CO)8-catalyzed terminal alkyne [2 + 2 + 2] cycloaddition reaction is reported. The trimers consist of three triphenylene discotic units linked to a central 1,2,4-trisubstituted benzene ring via flexible spacers. The trimers were synthesized in the yields up to 70% by mixing the monomers with 10 mol % of Co2(CO)8 as the catalyst in refluxing 1,4-dioxane. The liquid crystalline properties were investigated by using polarizing optical microscopy (POM), differential scanning calorimetry (DSC) and X-ray diffraction (XRD). Trimer 4 with an ester connecting group and a longer spacer exhibited a rectangular columnar mesophase, while 5b and 5c possessing an ether linkage and a shorter spacer display a hexagonal columnar mesophase. The connecting functional group and the length of the flexible spacer between the central benzene ring and the triphenylene units have pivotal influence on the mesomorphism.

Thermoreversible helical fibers from photoreactive triphenylene-derived liquid crystals in liquid paraffin.

Liquid crystalline triphenylene derivatives, TPC1p-n (n = 6, 12, 14, 16) were prepared using p-alkoxycinnamate as the [2+2] photo-cyclization site. TPC1p-n (n = 12, 14, 16) showed Colr phase and gave crescent-shaped or helical fibers after UV-irradiated in liquid paraffin solutions at 90 and 110 °C in the Colr temperature range. The apparent photoreaction products were shown to be thermally reversible, i.e. they dissolved in liquid paraffin at high temperatures and reappeared on cooling, indicating that they were aggregates of oligomerized TPC1p-n. The reaction mechanism was discussed in terms of the structure of the liquid crystalline phase.

Donor-acceptor substituted phenylethynyltriphenylenes - excited state intramolecular charge transfer, solvatochromic absorption and fluorescence emission.

Several 2-(phenylethynyl)triphenylene derivatives bearing electron donor and acceptor substituents on the phenyl rings have been synthesized. The absorption and fluorescence emission properties of these molecules have been studied in solvents of different polarity. For a given derivative, solvent polarity had minimal effect on the absorption maxima. However, for a given solvent the absorption maxima red shifted with increasing conjugation of the substituent. The fluorescence emission of these derivatives was very sensitive to solvent polarity. In the presence of strongly electron withdrawing (-CN) and strongly electron donating (-NMe2) substituents large Stokes shifts (up to 130 nm, 7828 cm⁻¹) were observed in DMSO. In the presence of carbonyl substituents (-COMe and -COPh), the largest Stokes shift (140 nm, 8163 cm⁻¹) was observed in ethanol. Linear correlation was observed for the Stokes shifts in a Lippert-Mataga plot. Linear correlation of Stokes shift was also observed with E(T)(30) scale for protic and aprotic solvents but with different slopes. These results indicate that the fluorescence emission arises from excited state intramolecular charge transfer in these molecules where the triphenylene chromophore acts either as a donor or as an acceptor depending upon the nature of the substituent on the phenyl ring. HOMO-LUMO energy gaps have been estimated from the electrochemical and spectral data for these derivatives. The HOMO and LUMO surfaces were obtained from DFT calculations.

Fluorinated Phenanthrenes as Aryne Precursors: PAH Synthesis Based on Domino Ring Assembly Using 1,1-Difluoroallenes.

On treatment with the catalyst InBr3 , 1,1-difluoroallenes that bear a cyclopentene moiety and an aryl group underwent domino ring assembly in the presence or absence of N-bromosuccinimide or N-iodosuccinimide to afford aryne precursors such as three-ringed ortho-fluoro(halo)phenanthrenes, four-ringed ortho-fluoro(halo)tetraphenes, ortho-fluoro(halo)chrysenes and fluoro[4]helicenes. Metalation of the aryne precursors followed by elimination of the fluoride resulted in the unprecedented systematic generation of arynes bearing π-extended systems. Diels-Alder reactions of these arynes with isobenzofurans afforded the corresponding cycloadducts whose reductive aromatisation in an SnCl2 /HBr system furnished fully aromatised benzotriphenylenes. In addition, oxidative aryl-aryl coupling (the Scholl reaction) of these benzotriphenylenes facilitated the synthesis of 'half HBCs' (hexabenzocoronenes).

Novel banana-discotic hybrid architectures.

Here we present the design and synthesis of novel banana-discotic dimers and banana-bridged discotic dimers. The chemical structures have been characterized by spectral techniques and elemental analysis. The thermal behaviors of the compounds have been investigated by polarizing optical microscopy and differential scanning calorimetry. None of these synthesized compounds exhibit any liquid crystalline property probably because of the incompatibility of the bent-core with the discotic core.

Expansion of the Graphdiyne Family: A Triphenylene-Cored Analogue.

Graphdiyne (GDY) comprises an important class in functional covalent organic nanosheets based on carbon-carbon bond formation, and recent focus has collected in the expansion of its variations. Here we report on the synthesis of a GDY analogue, TP-GDY, which has triphenylene as the aromatic core. Our liquid/liquid interfacial synthesis for GDY ( J. Am. Chem. Soc. 2017, 139, 3145) was modified for hexaethynyltriphenylene monomer to afford a TP-GDY film with a free-standing morphology, a smooth texture, a domain size of >1 mm, and a thickness of 220 nm. Resultant TP-GDY is characterized by series of microscopies, spectroscopies, and thermogravimetric and gas adsorption analyses.

Oriented Thin Films of Electroactive Triphenylene Catecholate-Based Two-Dimensional Metal-Organic Frameworks.

Two-dimensional triphenylene-based metal-organic frameworks (TP-MOFs) attract significant scientific interest due to their long-range order combined with significant electrical conductivity. The deposition of these structures as oriented films is expected to promote their incorporation into diverse optoelectronic devices. However, to date, a controlled deposition strategy applicable for the different members of this MOF family has not been reported yet. Herein, we present the synthesis of highly oriented thin films of TP-MOFs by vapor-assisted conversion (VAC). We targeted the M-CAT-1 series comprising hexahydroxytriphenylene organic ligands and metal-ions such as Ni2+, Co2+, and Cu2+. These planar organic building blocks are connected in-plane to the metal-ions through a square planar node forming extended sheets which undergo self-organization into defined stacks. Highly oriented thin Ni- and Co-CAT-1 films grown on gold substrates feature a high surface coverage with a uniform film topography and thickness ranging from 180 to 200 nm. The inclusion of acid modulators in the synthesis enabled the growth of films with a preferred orientation on quartz and on conductive substrates such as indium-doped tin oxide (ITO). The van der Pauw measurements performed across the M-CAT-1 films revealed high electrical conductivity values of up to 10-3 S cm-1 for both the Ni- and Co-CAT-1 films. Films grown on quartz allowed for a detailed photophysical characterization by means of UV-vis, photoluminescence, and transient absorption spectroscopy. The latter revealed the existence of excited states on a nanosecond time scale, sufficiently long to demonstrate a photoinduced charge generation and extraction in Ni-CAT-1 films. This was achieved by fabricating a basic photovoltaic device with an ITO/Ni-CAT-1/Al architecture, thus establishing this MOF as a photoactive material. Our results point to the intriguing capabilities of these conductive M-CAT-1 materials and an additional scope of applications as photoabsorbers enabled through VAC thin-film synthesis.