A Comprehensive Survey on Emerging Assistive Technologies for Visually Impaired Persons: Lighting the Path with Visible Light Communications and Artificial Intelligence Innovations.

In the context in which severe visual impairment significantly affects human life, this article emphasizes the potential of Artificial Intelligence (AI) and Visible Light Communications (VLC) in developing future assistive technologies. Toward this path, the article summarizes the features of some commercial assistance solutions, and debates the characteristics of VLC and AI, emphasizing their compatibility with blind individuals' needs. Additionally, this work highlights the AI potential in the efficient early detection of eye diseases. This article also reviews the existing work oriented toward VLC integration in blind persons' assistive applications, showing the existing progress and emphasizing the high potential associated with VLC use. In the end, this work provides a roadmap toward the development of an integrated AI-based VLC assistance solution for visually impaired people, pointing out the high potential and some of the steps to follow. As far as we know, this is the first comprehensive work which focuses on the integration of AI and VLC technologies in visually impaired persons' assistance domain.

Exploring the Effects of LED-Based Visible Light Communication on Reading and Color Perception in Indoor Environments: An Experimental Study.

Visible light communications (VLC) is a technology that enables the transmission of digital information with a light source. VLC is nowadays seen as a promising technology for indoor applications, helping WiFi to handle the spectrum crunch. Possible indoor applications range from Internet connection at home/office to multimedia content delivery in a museum. Despite the vast interest of researchers in both theoretical analysis and experimentation on VLC technology, no studies have been carried out on the human perceptions of objects illuminated by VLC-based lamps. It is important to define if a VLC lamp decreases the reading capability or modifies the color perception in order to make VLC a technology appropriate for everyday life use. This paper describes the results of psychophysical tests on humans to define if VLC lamps modify the perception of colors or the reading speed. The results of the reading speed test showed a 0.97 correlation coefficient between tests with and without VLC modulated light, leading us to conclude that there is no difference in the reading speed capability with and without VLC-modulated light. The results of the color perception test showed a Fisher exact test p-value of 0.2351, showing that the perception of color is not influenced by the presence of the VLC modulated light.

A Roadmap for Gigabit to Terabit Optical Wireless Communications Receivers.

Silicon photomultipliers' relatively large areas and ability to detect single photons make them attractive as receivers for optical wireless communications. In this paper, the relative importance of the non-linearity and width of SiPMs' fast output in their performance in receivers is investigated using Monte Carlo simulations. Using these results, the performances of receivers containing different SiPMs are estimated. This is followed by a discussion of the potential performances of arrays of existing SiPMs. Finally, the possible dramatic improvements in performance that could be achieved by using two stacked integrated circuits are highlighted.

Visible Light Communications-Based Assistance System for the Blind and Visually Impaired: Design, Implementation, and Intensive Experimental Evaluation in a Real-Life Situation.

Severe visual impairment and blindness significantly affect a person's quality of life, leading sometimes to social anxiety. Nevertheless, instead of concentrating on a person's inability, we could focus on their capacities and on their other senses, which in many cases are more developed. On the other hand, the technical evolution that we are witnessing is able to provide practical means that can reduce the effects that blindness and severe visual impairment have on a person's life. In this context, this article proposes a novel wearable solution that has the potential to significantly improve blind person's quality of life by providing personal assistance with the help of Visible Light Communications (VLC) technology. To prevent the wearable device from drawing attention and to not further emphasize the user's deficiency, the prototype has been integrated into a smart backpack that has multiple functions, from localization to obstacle detection. To demonstrate the viability of the concept, the prototype has been evaluated in a complex scenario where it is used to receive the location of a certain object and to safely travel towards it. The experimental results have: i. confirmed the prototype's ability to receive data at a Bit-Error Rate (BER) lower than 10-7; ii. established the prototype's ability to provide support for a 3 m radius around a standard 65 × 65 cm luminaire; iii. demonstrated the concept's compatibility with light dimming in the 1-99% interval while maintaining the low BER; and, most importantly, iv. proved that the use of the concept can enable a person to obtain information and guidance, enabling safer and faster way of traveling to a certain unknown location. As far as we know, this work is the first one to report the implementation and the experimental evaluation of such a concept.

Addressing Multi-User Interference in Vehicular Visible Light Communications: A Brief Survey and an Evaluation of Optical CDMA MAC Utilization in a Multi-Lane Scenario.

Visible Light Communications (VLC) are developing as an omnipresent solution for inter-vehicle communications. Based on intensive research efforts, the performance of vehicular VLC systems has significantly improved in terms of noise resilience, communication range, and latencies. Nevertheless, in order to be ready for deployment in real applications, solutions for Medium Access Control (MAC) are also required. In this context, this article provides an intensive evaluation of several optical CDMA MAC solutions and of their efficiency in mitigating the effect of Multiple User Interference (MUI). Intensive simulation results showed that an adequately designed MAC layer can significantly reduce the effects of MUI, ensuring an adequate Packet Delivery Ratio (PDR). The simulation results showed that based on the use of optical CDMA codes, the PDR can be improved from values as low as 20% up to values between 93.2% and 100%. Consequently, the results provided in this article show the high potential of optical CDMA MAC solutions in vehicular VLC applications, reconfirm the high potential of the VLC technology in inter-vehicle communications, and emphasize the need to further develop MAC solutions designed for such applications.

Comparison of the Nonlinear Dynamic Pre- and Post-LED Equalization.

Visible Light Communications (VLC) have gained much popularity lately. In such a system, a white LED (Light-Emitting Diode) plays a double role as a light source and a transmitter. The main problem here is that the LED exhibits a low bandwidth and high nonlinearity, so the equalization of the LED nonlinear dynamic response is necessary. For this, various equalizers are used. This paper compares the pre- and post-equalizer performance in terms of the received signal quality for a channel that includes a nonlinear element of limited bandwidth, such as an LED. Multilevel Pulse Amplitude Modulation (PAM) was selected as the signal format, as well as a variant of the Volterra series equalizer as the compensating element. The results obtained may be used for the correction of the dynamic characteristics of LEDs applied in VLC systems. For the sake of comparison, we used Modulation Error Ratio (MER) values at the receiver output. The dynamic nonlinear behavior was modeled by a Wiener-Hammerstein device, whereas the post/pre-equalizer was based on the dynamic deviation reduction-based Volterra series. The obtained results indicate that the post- and pre-equalizer performed comparably for the linear/moderately nonlinear channels and for a high noise level. In the case of high nonlinearity and a large SNR (Signal-to-Noise Ratio) values, the post-equalizer performed somewhat better in terms of MER by a few dB at maximum.

Robust Precoding for Multi-User Visible Light Communications with Quantized Channel Information.

In this paper, we address the design of multi-user multiple-input single-output (MU-MISO) precoders for indoor visible light communication (VLC) systems. The goal is to minimize the transmitted optical power per light emitting diode (LED) under imperfect channel state information (CSI) at the transmitter side. Robust precoders for imperfect CSI available in the literature include noisy and outdated channel estimation cases. However, to the best of our knowledge, no work has considered adding robustness against channel quantization. In this paper, we fill this gap by addressing the case of imperfect CSI due to the quantization of VLC channels. We model the quantization errors in the CSI through polyhedric uncertainty regions. For polyhedric uncertainty regions and positive real channels, as is the case of VLC channels, we show that the robust precoder against channel quantization errors that minimizes the transmitted optical power while guaranteeing a target signal to noise plus interference ratio (SNIR) per user is the solution of a second order cone programming (SOCP) problem. Finally, we evaluate its performance under different quantization levels through numerical simulations.

Design, Implementation and Experimental Investigation of a Pedestrian Street Crossing Assistance System Based on Visible Light Communications.

In urban areas, pedestrians are the road users category that is the most exposed to road accident fatalities. In this context, the present article proposes a totally new architecture, which aims to increase the safety of pedestrians on the crosswalk. The first component of the design is a pedestrian detection system, which identifies the user's presence in the region of the crosswalk and determines the future street crossing action possibility or the presence of a pedestrian engaged in street crossing. The second component of the system is the visible light communications part, which is used to transmit this information toward the approaching vehicles. The proposed architecture has been implemented at a regular scale and experimentally evaluated in outdoor conditions. The experimental results showed a 100% overall pedestrian detection rate. On the other hand, the VLC system showed a communication distance between 5 and 40 m when using a standard LED light crosswalk sign as a VLC emitter, while maintaining a bit error ratio between 10-7 and 10-5. These results demonstrate the fact that the VLC technology is now able to be used in real applications, making the transition from a high potential technology to a confirmed technology. As far as we know, this is the first article presenting such a pedestrian street crossing assistance system.

New Bounds on Capacity Region of Multiple Access Channels in Visible Light Communications.

In this paper, we propose new inner and outer bounds of the capacity region for multiple access channels in visible light communication (VLC) networks under both peak and average optical power constraints. Specifically, the proposed inner bounds are established by employing the single-user capacity achieving input distribution for each user. The proposed outer bounds are derived by determining single-user capacities for each user and calculating a sum capacity upper bound by relaxing the input constraints. Numerical results show that the proposed new bounds are extremely tight and outperform existing bounds over wide ranges of SNRs.

On the Noise Effect of Fingerprinting-Based Positioning Error in Underwater Visible Light Networks.

This paper assesses the performance of a localization technique for underwater visible light networks. The proposed approach is based on a fingerprinting technique, collecting the channel impulse responses from different wireless optical signals in the visible range. A local database related to the power level distribution within a maritime environment is built and exploited to estimate user position, e.g., a diver moving in a given space for underwater fish monitoring. In this paper, we investigate on the noise effect on the localization accuracy in underwater scenarios and for different water turbidity coefficient and we demonstrate that the estimation error suffers on variable channel impulse responses. Different configuration parameters and environmental scenarios have been considered, showing that the LED transmitter deployment can be effective in the localization estimation. A comparison of the proposed localization approach to the traditional triangulation method has been finally carried out, showing the effectiveness of the fingerprinting-based solution for a lower number of LED transmitters.

Optimized Analog Multi-Band Carrierless Amplitude and Phase Modulation for Visible Light Communication-Based Internet of Things Systems.

This paper presents a multi-user Visible Light Communication (VLC)-based Internet of Things (IoT) system using multi band-Carrierless Amplitude and Phase (m-CAP) modulation for IoT applications. The proposed system uses a digital m-CAP modulator embedded in a ceiling LED light fixture and analog receivers, aiming at low-cost, low-power, and small-sized IoT devices. The performance was evaluated in terms of the filtering stage design and the usage of guard bands. Different pairs of emitter and receiver filters were considered. While Bessel and Butterworth analog filters were tested in the analog receiver, the digital m-CAP modulator pulse shaping filter considered raised cosine filters, as well as digital matched filters for the analog Bessel and Butterworth filters. Regarding the guard bands, two approaches were considered: either by using the raised cosine roll-off factor (bandwidth compression) or by suppressing the even bands. The Bit Error Rate (BER) performance was obtained by simulation. The usage of the Bessel filter in the receiver, along with a digital matched filter, proved to be the best solution, achieving a BER lower than 10-3 for an Eb/No of 6 dB, using a third-order filter. Furthermore, guard bands should be used in order to mitigate inter-band interference in order to have improved performance when multiple users intend to simultaneously communicate.

VLC Network Design for High Mobility Users in Urban Tunnels.

Current vehicular systems require real-time information to keep drivers safer and more secure on the road. In addition to the radio frequency (RF) based communication technologies, Visible Light Communication (VLC) has emerged as a complementary way to enable wireless access in intelligent transportation systems (ITS) with a simple design and low-cost deployment. However, integrating VLC in vehicular networks poses some fundamental challenges. In particular, the limited coverage range of the VLC access points and the high speed of vehicles create time-limited links that the existing handover procedures of VLC networks can not be accomplished timely. Therefore, this paper addresses the problem of designing a vehicular VLC network that supports high mobility users. We first modify the traditional VLC network topology to increase uplink reliability. Then, a low-latency handover scheme is proposed to enable mobility in a VLC network. Furthermore, we validate the functionality of the proposed VLC network design method by using system-level simulations of a vehicular tunnel scenario. The analysis and the results show that the proposed method provides a steady connection, where the vehicular node is available more than 99% of the time regardless of the number of vehicular nodes on this network. Additionally, the system is able to achieve a Frame-Error-Rate (FER) performance lower than 10-3.

Survey on Optical Wireless Communications-Based Services Applied to the Tourism Industry: Potentials and Challenges.

In this paper, we explore the potential applications of Optical Wireless Communications in the tourism industry, considering both indoor and outdoor scenarios and different transmission speeds. They range from high-speed atmospheric outdoor links (Free-Space Optics (FSO)) to indoor systems based on high-speed lighting networks (known under the trade name LiFi©) or low-speed services support the Internet of Things networks, using visible light (VLC) or IR emitters, with receivers based on either on classical photodiodes or in image sensors, known as Optical Camera Communications. The avant-garde applications of this technology have been studied focusing on three possible use scenarios: the traveler himself, in what we have called TAN (Tourist Area Network); the tourist facility, which includes not only the hotel but also leisure areas (theme parks, museums, natural protected areas) or services (restaurants, shopping areas, etc.); and the entire destination, which can be both the city or the territory where the tourist is received, within the paradigm of the Smart Tourist Destination (STD). In addition to the classic services based on radio frequency and wired broadband networks, these technologies will make it possible to meet the tourist's challenging needs, the establishment, and the destination. Besides, they cover the services imposed by the new marketing services related to location or context and feed the big data systems used to study tourist behavior.

Utilization of LED Grow Lights for Optical Wireless Communication-Based RF-Free Smart-Farming System.

Indoor smart-farming based on artificial grow lights has gained attention in the past few years. In modern agricultural technology, the growth status is generally monitored and controlled by radio-frequency communication networks. However, it is reported that the radio frequency (RF) could negatively impact the growth rate and the health condition of the vegetables. This work proposes an energy-efficient solution replacing or augmenting the current RF system by utilizing light-emitting diodes (LEDs) as the grow lights and adopting visible light communications and optical camera communication for the smart-farming systems. In particular, in the proposed system, communication data is modulated via a 24% additional green grow LED light that is also known to be beneficial for the growth of the vegetables. Optical cameras capture the modulated green light reflected from the vegetables for the uplink connection. A combination of white ceiling LEDs and photodetectors provides the downlink, enabling an RF-free communication network as a whole. In the proposed architecture, the smart-farming units are modularized, leading to flexible mobility. Following theoretical analysis and simulations, a proof-of-concept demonstration presents the feasibility of the proposed architecture by successfully demonstrating the maximum data rates of 840 b/s (uplink) and 20 Mb/s (downlink).

Analysis and Experimental Investigation of the Light Dimming Effect on Automotive Visible Light Communications Performances.

The use of Visible Light Communications (VLC) in vehicular applications has become a major research area due to its simplicity, high performance to cost ratio, and great deployment potential. In this context, this article provides one of the very few analyses and experimental evaluations concerning the integration of a light dimming function in vehicular VLC systems. For this purpose, a vehicle-to-vehicle VLC prototype has been implemented and used to evaluate the systems' communication performances in light dimming conditions, while decreasing the duty cycle from 40% to 1%, and increasing the communication range from 1 to 40-50 m. The experimental results showed that in normal lighting conditions, the VLC technology can easily support low duty cycle light dimming for ranges up to 40 m, while maintaining a 10-6 BER. Nevertheless, in strong optical noise conditions, when the system reaches its SNR limit, the communication range can decrease by half, whereas the BER can increase by 2-4 orders of magnitude. This article provides consistent evidence concerning the high potential of the VLC technology to support inter-vehicle communication links, even in light dimming conditions.

Optical Camera Communication as an Enabling Technology for Microalgae Cultivation.

Optical Camera Communication (OCC) systems have a potential application in microalgae production plants. In this work, a proof-of-concept prototype consisting of an artificial lighting photobioreactor is proposed. This reactor optimises the culture's photosynthetic efficiency while transmitting on-off keying signals to a rolling-shutter camera. Upon reception, both signal decoding and biomass concentration sensing are performed simultaneously using image processing techniques. Moreover, the communication channel's theoretical modelling, the data rate system's performance, and the plant distribution requirements and restrictions for a production-scale facility are detailed. A case study is conducted to classify three different node arrangements in a real facility, considering node visibility, channel capacity, and space exploitation. Finally, several experiments comprising radiance evaluation and Signal-to-Noise Ratio (SNR) computation are performed at different angles of view in both indoor and outdoor environments. It is observed that the Lambertian-like emission patterns are affected by increasing concentrations, reducing the effective emission angles. Furthermore, significant differences in the SNR, up to 20 dB, perceived along the illuminated surface (centre versus border), gradually reduce as light is affected by greater dispersion. The experimental analysis in terms of scattering and selective wavelength attenuation for green (Arthrospira platensis) and brown (Rhodosorus marinus) microalgae species determines that the selected strain must be considered in the development of this system.

Evaluation of Misalignment Effect in Vehicle-to-Vehicle Visible Light Communications: Experimental Demonstration of a 75 Meters Link.

The use of visible light communications technology in communication-based vehicle applications is gaining more and more interest as the research community is constantly overcoming challenge after challenge. In this context, this article addresses the issues associated with the use of Visible Light Communications (VLC) technology in Vehicle-to-Vehicle (V2V) communications, while focusing on two crucial issues. On the one hand, it aims to investigate the achievable communication distance in V2V applications while addressing the least favorable case, namely the one when a standard vehicle rear lighting system is used as a VLC emitter. On the other hand, this article investigates another highly unfavorable use case scenario, i.e., the case when two vehicles are located on adjacent lanes, rather than on the same lane. In order to evaluate the compatibility of the VLC technology with the usage in inter-vehicle communication, a VLC prototype is intensively evaluated in outdoor conditions. The experimental results show a record V2V VLC distance of 75 m, while providing a Bit Error Ratio (BER) of 10-7-10-6. The results also show that the VLC technology is able to provide V2V connectivity even in a situation where the vehicles are located on adjacent lanes, without a major impact on the link performances. Nevertheless, this situation generates an initial no-coverage zone, which is determined by the VLC receiver reception angle, whereas in some cases, vehicle misalignment can generate a BER increase that can go up to two orders of magnitude.

On the Achievable Max-Min User Rates in Multi-Carrier Centralized NOMA-VLC Networks.

Visible light communications (VLC) is gaining interest as one of the enablers of short-distance, high-data-rate applications, in future beyond 5G networks. Moreover, non-orthogonal multiple-access (NOMA)-enabled schemes have recently emerged as a promising multiple-access scheme for these networks that would allow realization of the target spectral efficiency and user fairness requirements. The integration of NOMA in the widely adopted orthogonal frequency-division multiplexing (OFDM)-based VLC networks would require an optimal resource allocation for the pair or the cluster of users sharing the same subcarrier(s). In this paper, the max-min rate of a multi-cell indoor centralized VLC network is maximized through optimizing user pairing, subcarrier allocation, and power allocation. The joint complex optimization problem is tackled using a low-complexity solution. At first, the user pairing is assumed to follow the divide-and-next-largest-difference user-pairing algorithm (D-NLUPA) that can ensure fairness among the different clusters. Then, subcarrier allocation and power allocation are solved iteratively through both the Simulated Annealing (SA) meta-heuristic algorithm and the bisection method. The obtained results quantify the achievable max-min user rates for the different relevant variants of NOMA-enabled schemes and shed new light on both the performance and design of multi-user multi-carrier NOMA-enabled centralized VLC networks.

Transmitter and receiver technologies for optical wireless.

Providing a reliable link, with sufficient signal-to-noise ratio (SNR) and bandwidth to deliver high-capacity communications is a critical challenge for optical wireless (OW) communications and understanding and jointly optimizing the performance of the transmitter and receiver subsystems is a key part of this. At the transmitter a source of light, either a laser or a light-emitting diode, must be modulated with the communications signal. The resulting emission must be directed, using optics or steering systems, as required for the particular application, and must be within any safety levels set by relevant standards. The receiver is the most critical part of any optical link, as its design is a dominant factor in determining the received SNR, which determines the capacity and ultimately the utility of the link. A receiver must collect, filter and concentrate signal radiation, then detect and amplify the resulting electrical signal. This review surveys the state-of-the-art transmitter and receiver technologies. Details of design constraints are discussed, and potential future directions discussed. This article is part of the theme issue 'Optical wireless communication'.

Channel modelling for indoor visible light communications.

Visible light communication (VLC) allows the dual use of light-emitting diodes (LEDs) for wireless communication purposes in addition to their primary purpose of illumination. As in any other communication system, realistic channel modelling is a key for VLC system design, analysis and testing. In this paper, we present a comprehensive survey of indoor VLC channel models. In order to set the background, we start with an overview of infrared (IR) channel modelling, which has received much attention in the past, and highlight the differences between visible and IR optical bands. In the light of these, we present a comparative discussion of existing VLC channel modelling studies and point out the relevant advantages and disadvantages. Then, we provide a detailed description of a site-specific channel modelling approach based on non-sequential ray tracing that precisely captures the optical propagation characteristics of a given indoor environment. We further present channel models for representative deployment scenarios developed through this approach that were adopted by the Institute of Electrical and Electronics Engineering (IEEE) as reference channel models. Finally, we consider mobile VLC scenarios and investigate the effect of receiver location and rotation for a mobile indoor user. This article is part of the theme issue 'Optical wireless communication'.