Volar fixed plating of distal radius fractures: optimizing plate position for enhanced clinical outcomes.

BACKGROUND: The precise influence of plate position on clinical outcomes in the context of volar fixed-angle plating for distal radius fractures is not fully understood. This article aims to investigate the influence of plate position on clinical results, and functional outcomes in patients treated with volar fixed plating for distal radius fractures. METHODS: A total of 58 patients with 64 distal radius fractures were included in the study. Patient demographics, fracture characteristics, surgical details, and radiographic data were collected. Post-operative AP and Lat views of all patients taken on the first day after surgery were evaluated. Volar Tilt, Radial Inclination and Radial Height measurements were used as reduction criteria. In the follow-up, the patients were called for their last control, flexion and extension angles of the wrist and Mayo Wrist Scores, the distance of the plate to the joint line and the angle between the plate and the radial shaft were measured and recorded. RESULTS: A total of 64 distal radius fractures, with a mean age of 46.9 years, and the mean follow-up period 24.9 months were included in this study. There was a significant relationship between the Radial Inclination and Plate-Shaft Angle variables and the Mayo Wrist Score at a 99% confidence interval. Additionally, a relationship was observed between the Radial Height variable and the Mayo Score at a 90% confidence interval. A significant positive association was observed between radial inclination and achieving a Good-to-Excellent Mayo score (OR = 1.28, 95% CI [1.08-1.51], p = 0.004). Plate distance to joint line demonstrated a marginally significant positive association with a Good-to-Excellent Mayo score (OR = 1.31, 95% CI [0.97-1.77], p = 0.077). Univariate analysis revealed a significant negative association between plate-shaft angle and achieving a Good-to-Excellent Mayo score (OR = 0.71, 95% CI [0.52-0.99], p = 0.045). This negative association remained statistically significant in the multivariate analysis (p = 0.016). CONCLUSION: Radial inclination, plate distance to joint line, and angle between plate and radius shaft were identified as significant factors associated with improved Mayo Wrist Scores.

Relation between the dash score and radiographic evaluation of the wrist in patients with wrist fracture.

Traditionally, the assessment of distal radius fracture outcomes has been based on radiological measurements and self-evaluation scores. However, there is uncertainty regarding how accurately these measurements reflect the patient's perception of their outcome. In this study, we examined the correlation between radiological measurements and patient-perceived outcomes using the Disabilities of the Arm, Shoulder, and Hand outcome (DASH) score. 140 individuals who had recovered from a distal radius fracture. and had been treated with DVR, Kapandji, percutaneous pinning or closed reduction were included in the study. The retrospective assessment included 78 females and 62 males, with a mean DASH score of 3.54 points.Except for the ulnar variance, the study found little to no significant association between the DASH score and the final radiological measurement.In summary, the DASH score did not always indicate that a superior radiological result translated into a better patient-perceived outcome.

Assessment of Ulnar Carpal Translocation and Carpal Alignment After Volar Plate Fixation With Vascularized Bone Graft for Scaphoid Waist Fracture Nonunions.

PURPOSE: Multiple fixation methods with or without vascularized graft have been described to treat scaphoid nonunions. This study aimed to assess the incidence of carpal malalignment and the degree of ulnar carpal translocation after scaphoid volar plate fixation with pedicled vascularized bone graft in scaphoid waist nonunions with humpback deformity. METHODS: A retrospective cohort study of individuals with recalcitrant scaphoid fracture nonunion treated with volar scaphoid plating and vascularized bone graft was analyzed. All patients had radiographs with the wrist at neutral with clinical follow-up of at least 3 months after surgery. Ulnar subluxation of the carpus was assessed by the change in lunate uncovering and carpal-radial distance before and after surgery. RESULTS: Seventeen patients were included for analysis. Average age was 26 years with an average follow-up interval of 11.0 months. After surgery, 16 patients (94.1%) had fracture union. Between preoperative and initial postoperative imaging, there was an increase in lunate uncovering (mean difference: 8.8%; 95% confidence interval, 4.6% to 13.1%) and carpal-radial distance (mean difference: 3.3% ulnar shift; 95% confidence interval, 1.1% to 5.4%). After surgery, there was minimal change in lunate uncovering and carpal-radial distance from immediately after surgery to final follow-up. CONCLUSIONS: Preoperative lunate uncovering was lower than normal values, suggesting an abnormal radial shift of the carpus with a collapsed scaphoid. Postoperative lunate uncovering was similar to normal values, reflecting an ulnar shift of the carpus after operative intervention. TYPE OF STUDY/LEVEL OF EVIDENCE: Therapeutic IV.

Articular Fragment Escape and Carpal Subluxation Following Distal Radius Fracture Fixation.

Surgical fixation of distal radius fractures is among the more common procedures performed by hand surgeons. The approach to surgical management is based on a variety of factors including injury mechanism, fracture pattern, patient characteristics, bone quality, soft tissue injury, and surgeon preference. For the majority of fracture types, volar locking plate fixation has become the most commonly used method of fracture fixation. Although uncommon, complications can arise following this form of treatment, one of which is escape of an articular fragment with resultant carpal instability. More often seen in conjunction with poorly reduced or captured displaced volar lunate facet fragments, fixation failure and carpal instability can occur with other fracture patterns that have garnered less attention, particularly those involving the radial column or dorsal lunate facet. Thorough preoperative planning to recognize fracture patterns that lead to this complication is paramount. Proper selection of implants used to secure the fracture and the choice as well as duration of postoperative immobilization is critical to minimizing this complication. We aim to (1) describe the relevant anatomy involved with this complication, (2) organize and classify the various distal radius articular fragment escape patterns that can occur following fracture fixation, and (3) discuss strategies that can help prevent this complication.

Management of stable proximal interphalangeal joint volar plate injuries with figure-of-8 orthoses: A parallel-group randomized controlled trial.

BACKGROUND: Volar plate injuries of the proximal interphalangeal (PIP) finger joint are common. Conservative treatment involves orthoses to limit hyperextension at the PIP joint yet allow movement of the joints to prevent joint stiffness and deformity. Custom-made dorsal blocking orthoses are recommended treatments. Previous research also supports the use of a figure-of-8 orthosis, although the comparative effectiveness of these orthoses is not currently known. PURPOSE: This study aimed to compare the figure-of-8 orthosis and dorsal blocking orthosis for changes in the range of movement, pain, and function following stable volar plate PIP joint injuries and to compare the number of hand therapy appointments required. STUDY DESIGN: A parallel-group pilot randomized controlled trial. This trial was registered with the Australian and New Zealand Clinical Trials Registry (Trial ID: CTRN12619000449134). METHODS: Participants aged 13-65 years were recruited from an outpatient hand therapy service and randomly assigned to experimental or control groups. The experimental group of 20 participants received a custom-made thermoplastic figure-of-8 orthosis limiting the extension to 15-20 degrees. The control group of 22 participants had a dorsal blocking orthosis, which was serially extended by 10 degrees weekly starting at 30 degrees flexion. Participants were blinded to their group allocation. Outcome measures included range of movement, edema, pain, function, and number of hand therapy appointments. Data collection was completed by the treating therapist who was not blinded to group assignment. Data analysis included a series of mixed-model analyses of variance to examine changes over time. RESULTS: Forty-two participants were recruited and had their data analyzed. No significant between-group differences were observed for DIP flexion, PIP flexion, pain, and function from baseline to follow-up. Both groups exhibited significant improvements in these outcomes over time (p < 0.001); effect sizes ranged from small to large (0.28-0.79). On average, the intervention group required 4 (±1.5) appointments compared to 6 (±1.5) in the control group over the same period representing a significant difference (p < 0.001). CONCLUSIONS: Both dorsal blocking and figure-of-8 orthoses provide similar outcomes. The use of a figure-of-8 orthosis, or a dorsal block orthosis fabricated in maximal comfortable extension depending on severity, could reduce the number of appointments and increase convenience for patients.

Dorsal blocking orthoses for proximal interphalangeal joint volar plate injuries: A retrospective cohort study investigating the impact of joint angle on patient outcomes.

BACKGROUND: Injuries to the proximal interphalangeal joint (PIPJ) of the fingers are commonly treated in hand therapy departments. Conservative management for PIPJ volar plate injuries typically involves a dorsal blocking orthosis and flexion exercises. Historically hand therapists have placed the PIPJ in varying degrees of flexion but the optimal angle is unknown. PURPOSE: To compare the outcomes of two treatment groups who received dorsal blocking orthoses: Those who the orthosis was positioned in neutral compared to those in 25-30° of flexion. STUDY DESIGN: Retrospective cohort study. METHOD: Patients treated by the hand therapy service at a major metropolitan hospital network in Melbourne, Australia, for conservative management of a PIPJ volar plate injury over a three-year period were included in our study. Data regarding patient demographics, digits affected and injury type were collected. Outcomes included presence of a fixed flexion deformity (FFD), amount of hand therapy received and total active flexion at the PIPJ. RESULTS: One hundred and eleven participants were included in our study. The mean age was 26 and 59 (53%) were males. Seventy two (64%) participants received a dorsal blocking orthosis positioned in neutral and 39 (35%) were positioned in 25-30° flexion at the PIPJ. Participants whose orthosis was positioned at 25-30° had an average of 24 more minutes in hand therapy (which equates to approximately one appointment) compared to those whose PIPJ was positioned in neutral (p=0.006, d=0.5). Eight percent less participants developed a FFD (p = 0.24) and 13% more participants achieved full flexion (p = 0.06) in the group who received a dorsal blocking orthosis in neutral, however these results were not statistically significant. CONCLUSION: PIPJ volar plate injures treated in an orthosis positioned in neutral required fewer hand therapy appointments. There was no statistically significant difference between groups regarding development of a FFD or full flexion.

Isolated volar dislocation of the distal radioulnar joint: Current concepts review and case report.

Isolated volar distal radioulnar joint (DRUJ) dislocation is a rare condition with only a few cases reported in the literature. Its diagnosis is often overlooked in the acute phase, and there is no consensus in its management. We present the case of a 20-year-old male patient with an isolated volar radioulnar dislocation, together with a review of the literature. The aim is to present and summarize the acute management of this condition and propose a therapeutic algorithm.

Comparison of treatment of volar Barton's fracture with T plate using distal end screws and without distal end screws.

Objective: To compare the functional and radiological outcomes of treatment of volar Barton's fractures using T plate with and without distal end screws. Methods: This randomized control trial was conducted at the department of Orthopedics, Mayo Hospital, Lahore, Pakistan from December 2021 to May 2022. Total 60 patients (30 in each group) were randomly allocated to either group A (T-Plate with distal end screws) or B (T-Plate without distal end screws). Patients were followed up on day-0, day-14, day-28 and day-90. Assessments of patients were done by Green O'Brien Score for pain, Modified Warden Score for callus formation on radiographs at 12-weeks of follow-up and Stewart Score for displacement of fracture. Results: At 90th day, significant difference was seen in Green O'Brien Score (Excellent score: Group-A: 80% vs. Group-B: 90%, p=0.278) while Stewart scores remained comparable (Excellent Score: Group-A: 93.33% vs. Group-B: 96.67%, p=0.221) between treatment groups. Fracture healing assessed with Modified Warden score for score 4 did not show significant difference between both groups at 90th day. i.e. (Group-A: 96.67% vs. Group-B: 96.67%). However, callus formation assessed with Modified Warden score for score 3 showed significant differences between groups at 90th day. i.e. (Group-A: 53.33% vs. Group-B: 86.67%, p=0.001). Conclusion: Both treatment approaches appear to yield comparable outcomes in terms of clinical assessment, Stewart scores, and fracture healing, with a potential advantage for T-plate without distal end screw in callus formation at the 90th day.Trial registration: IRCT20221231056999N1.

Pronator quadratus preserving versus pronator quadratus dissecting approaches in volar plate fixation of distal radius fractures: a systematic review of comparative studies.

PURPOSE: To compare pronator quadratus preserving (PQ-P) approaches with PQ dissecting (PQ-D) approaches in volar plate fixation of distal radius fractures (DRFs). METHODS: Three databases were searched on March 10th, 2024. The authors adhered to the PRISMA and R-AMSTAR guidelines and Cochrane Handbook for Systematic Reviews. Data on demographics, fracture classifications, patient reported outcome measures (PROMs), range of motion, radiographic parameters, and complications were extracted. RESULTS: Thirteen studies with a total of 1007 fractures were included. Two of three studies reported lower DASH scores in the PQ-P group between 6 weeks and 3 months postoperative, however no studies reported lower scores in the PQ-P group after 3 months. Three of three studies reported significantly lower VAS scores at 6 weeks postoperative, however no studies reported significant differences after 6 months. Only one of six studies reported significantly greater flexion, extension, and pronation in the PQ-P group. One of four studies reported greater radial deviation in the PQ-P group, while there were no differences in supination or ulnar deviation. One of ten and one of six studies reported greater volar tilt and ulnar variance or radial length, respectively, in the PQ-P group. CONCLUSION: There is not sufficient evidence supporting the utility of PQ-P approaches over conventional PQ-D approaches for volar plate fixation of DRFs, especially at long-term follow-ups (3+ months). There may be short term benefits with PQ-P approaches, specifically with regards to PROMs in the short-term (< 6 weeks), however there is limited high-quality evidence supporting these findings. LEVEL OF EVIDENCE: Level III.

Volar locking and angular stability plate for treatment of comminuted scaphoid fractures: a case series of 44 cases.

BACKGROUND: The primary method employed worldwide for the treatment of scaphoid fractures is screw fixation. However, in unstable and comminuted fractures, percutaneous fixation could produce complications due to technical challenges, such as improper axis positioning, inaccurate screw length measurement, intra-articular screw penetration, and impingement. Alternative open approaches for the surgical management of scaphoid fractures have been proposed, and in recent years, a new specific volar locking plate for the treatment of scaphoid fractures has been developed. This study aims to present the outcomes of this technique applied to 44 patients with unstable and comminuted fractures of the scaphoid. AIMS: The purpose of the study is to verify the effectiveness of the volar plate in the treatment of comminuted scaphoid fractures and the necessity for plate removal when consolidation has occurred. METHODS: Between January 2021 and March 2023, a specific volar locking plate for the treatment of scaphoid fractures was used in 44 patients. A retrospective study was conducted involving all patients, consisting of continuous clinical and radiographic assessments, functional evaluations (using QuickDASH and MHQ), and patient satisfaction surveys. RESULTS: All patients achieved clinical and radiographic recovery. However, the plate can impinge with nearby structures and should be removed once the fracture is consolidated. After plate removal, further improvement in range of motion was observed. CONCLUSION: The plate and screws system is a viable and appropriate method of osteosynthesis in the treatment of unstable and comminuted recent fractures occurring in the middle third of the carpal scaphoid.

The role of ultrasonography in diagnosing acute closed volar plate injury of proximal interphalangeal joint.

BACKGROUND: Acute closed volar plate injury of the proximal interphalangeal joint (PIP) is a common hand injury. In the past, there were few objective evaluation imaging methods for the degree of volar plate injury. The purpose of this study was to investigate the role of high frequency ultrasonography in diagnosing volar plate injury, and to explore whether ultrasound can provide a beneficial guidance to clinical decision-making and appropriate treatment adopting through accurate US classification of volar plate injury. METHODS: From May 2019 to may 2022, 41 patients diagnosed with volar plate injury were included in this study. All patients underwent ultrasonography and X-ray examinations. The sonographic features were analyzed. A new kind of classification of volar plate injury based on ultrasonography findings was described. RESULTS: Either an injury of volar plate or an avulsion fracture of middle phalangeal base was identified clearly on ultrasonography, according to which volar plate injury could be divided into three types: A, B and C. Type A, avulsion fracture of the middle phalangeal base without volar plate rupture; Type B, full thickness tear of the volar plate without avulsion fracture; Type C, partial thickness tear of the volar plate. The average thickness of the three types of injured volar plate measured by ultrasound was 0.33 ± 0.05 cm, and the average thickness of the volar plate at the same site of the corresponding finger on the contralateral side was 0.22 ± 0.03 cm. There was significant difference between the two group (t = 11.823, p = 1.2476 *10^(-14)). CONCLUSIONS: High frequency ultrasonography could be a reliable, accurate, convenient and non-radioactive diagnostic imaging technique in the evaluation of acute closed volar plate injury of PIP. And ultrasound could provide a beneficial guidance to clinical decision-making and appropriate treatment adopting through accurate US classification.

Transepidermal water loss and stratum corneum hydration in forearm versus hand palm.

BACKGROUND: Skin measurements of transepidermal water loss (TEWL) and stratum corneum hydration (SCH) reflect different aspects of skin physiology. Since epidermal water loss depends on epidermal-to-air water vapor gradients, a possible quantitative relationship between TEWL and SCH may exist. This investigation's purpose was to test the possible TEWL-SCH relationship. MATERIALS AND METHODS: SCH and TEWL were measured noninvasively on forearm and palmer thenar eminence (hand) in 40 young adults (20 males) along with total body fat percentage (FAT) via bioimpedance. RESULTS: A significant positive nonlinear correlation (p < 0.001) was detected between SCH and TEWL in hands of the male cohort that occurred when SCH exceeded a threshold level. This threshold level was not exceeded in male or female forearms and forearms did not display a SCH-TEWL correlation. There was a weak inverse dependence of TEWL on FAT on both forearm and hand (p < 0.05), but no SCH-FAT relationship was observed. TEWL values on the forearm and hand were moderately correlated with each other (p = 0.002) but SCH values were not. CONCLUSION: The findings clarify the relationship between forearm and palmer hydration and TEWL values, and their relationship to total body fat percentages in young healthy adults. The significant correlation between palmer stratum corneum hydration and palmer TEWL that was discovered in the male but not the female cohort suggests a threshold hydration level for which TEWL depends both on skin barrier function and stratum corneum hydration. This implies that conditions with increased SCH may in part account for elevated TEWL values.

The association of three anatomical factors with ulnar-sided wrist pain: a radiological study.

BACKGROUND: Ulnar-sided wrist pain is associated with the development of multiple wrist pathologies. But the anatomical etiologies have not been fully understood. PURPOSE: To determine the association of three anatomical factors with ulnar-sided wrist pain, including ulnar variance (UV), distal ulnar volar angle (DUVA), and pisiform-ulnar distance (PUD). MATERIAL AND METHODS: A total of 64 patients who had ulnar-sided wrist pain associated with training injuries were retrospectively studied. A control group included 64 healthy athletes from the same unit. The UV, DUVA, and PUD of each individual was measured on radiographs. RESULTS: The average UV and DUVA of those in the ulnar-sided pain group were 0.84 mm and 174.65°, respectively; the control group values were 0.39 mm and 175.11°. The differences between the two groups had no statistical significance (P > 0.05). The average PUD of the ulnar-sided wrist pain group was shorter than that of the control group (2.37 cm vs. 2.65 cm); the difference had statistical significance (P < 0.05). PUD had a negative correlation with ulnar-sided pain; it was an anatomical protective factor (odds ratio = 0.01; P < 0.00; 95% confidence interval=0.00-0.05). Both UV and DUVA had no significant correlations with ulnar-sided wrist pain (P > 0.05). CONCLUSION: PUD has a significant correlation with ulnar-sided wrist pain. It is the anatomical protective factor. Both the UV and DUVA have no statistical association with ulnar-sided wrist pain, but we cannot ignore their potential pathogenic effects on wrists, and further studies are needed to confirm the results.

A randomised clinical trial comparing outcomes of a single digit volar plate injury - Buddy loops versus dorsal thermoplastic orthosis in a neutral position: study protocol.

BACKGROUND: Volar plate injuries are a common hand injury and complications associated with this injury such as a fixed flexion deformity, persistent pain and oedema can have a significant impact on a person's function. The literature reports these injuries are treated using various splinting materials such as thermoplastic, in varying degrees of proximal interphalangeal joint flexion or buddy loops. Despite volar plate injuries being reported as common, optimal non-surgical treatment of these injuries remains unclear. This study aims to investigate whether a dorsal blocking orthosis in a neutral position (00) is more effective than buddy loops for a volar plate injury to the proximal interphalangeal joint in preventing a fixed flexion deformity, reducing pain, managing oedema, and promoting function. METHODS: This study is a single-centre, prospective parallel-group, single blinded (assessor), randomised clinical trial. Patients between 18-65 years, who have sustained a volar plate injury to a single digit, have adequate cognitive functioning and give written informed consent will be invited to participate in this study. Patients will be randomised to either the control group where they will be fitted with buddy loops and commence early active motion exercises or the experimental group where they will receive a dorsal thermoplastic orthosis in a neutral position and commence early active motion exercises. The primary outcome measure is passive proximal interphalangeal joint extension and secondary outcome measures include passive range of motion, total passive motion, active range of motion, total active motion, grip strength, oedema, pain, function and adherence to treatment. Assessments will be completed until 8 weeks following commencement of treatment. The sample size calculation indicates that 23 patients is required in each group. With an expected dropout rate of 25% a total of 32 patients will be enrolled in each group. DISCUSSION: This study will assist in trying to improve treatment of volar plate injuries and assist in reducing complications associated with volar plate injuries, potentially reducing the need for prolonged hand therapy. TRIAL REGISTRATION: This trial has been registered with the Australian New Zealand Clinical Trials Registry (ACTRN12622001425785p). Ethical approval has been granted by the South Eastern Sydney Local Health District ethical committee (2022/ETH01697).

Higher Soong grade predicts flexor tendon issues after volar plating of distal radius fractures - a retrospective cohort study.

BACKGROUND AND PURPOSE: Soong classification is used to estimate volar locking plate prominence and evaluate the risk for flexor tendon ruptures after surgical treatment of distal radius fractures (DRFs). However, the scientific community has questioned the Soong classification due to lacking evidence. Therefore, this study aimed to evaluate the accuracy of Soong grading as a predictor for flexor tendon issues and plate removal. PATIENTS AND METHODS: We performed a retrospective single-center review of adult distal radius fracture patients treated with a volar locking plate between 2009 and 2019. In total, 2779 patients were included in the study. The primary outcome was a flexor tendon issue (flexor tendon rupture, tendinitis, or flexor irritation), whereas plate removal was a secondary outcome. Using Soong grade 0 as a reference, we used univariable and multivariable logistic regression to calculate odds ratios (OR) with 95% confidence intervals (CI) for flexor tendon issues and plate removal. RESULTS: In total, 756 (27%) patients were graded as Soong 0, 1679 (60%) Soong 1, and 344 (12%) Soong 2, respectively. There were 32 (1.2%) patients with flexor tendon issues, of which 4 were flexor tendon ruptures, 8 tendinitises, and 20 flexor irritations. The adjusted OR for flexor tendon issues was 4.4 (CI 1.1-39.7) for Soong grade 1 and 9.7 (CI 2.2-91.1) for Soong grade 2. The plate was removed from 167 (6.0%) patients. Soong grade 1 had a univariable OR of 1.8 (CI 1.2-2.8) for plate removal, and Soong grade 2 had an OR of 3.5. (CI 2.1-5.8), respectively. CONCLUSION: Flexor tendon ruptures are rare complications after the volar plating of DRFs. A higher Soong grade is a risk factor for flexor tendon issues and plate removal. TRIAL REGISTRATION: The trial was retrospectively registered.

Combined approach versus single Henry approach for fixation of die-punch distal radius fractures: a retrospective study.

BACKGROUND: Distal radius fracture (DRF) is one of the most common orthopaedic-related traumas. DRF patients with die-punch fractures have a higher risk of loss of reduction, poorer functional outcomes, and increased risk of complications even after open reduction and internal fixation (ORIF). According to the three-column theory, the lunate fossa is an important part of the intermediate column for load bearing. When the distal radius fracture involves the lunate fossa, adequate anatomical reduction can have an important impact on the prognosis of wrist function. Herein, we used the combined volar and dorsal approach, and the dorsal approach was used to assist in bone grafting or dorsal plate fixation in reducing fractures. We compare the combined approach versus the Henry approach for the fixation of die-punch distal radius fractures. METHODS: We reviewed patients who were admitted for surgery for die-punch fractures from January 2016 to June 2021. The patients were followed-up after surgery to measure and evaluate their Gartland-Werley wrist score, wrist range of motion (ROM), and follow-up imaging data. RESULTS: There were 21 patients in the volar locking plate (VLP) group and 10 patients in the combined approach group. The majority of fractures in the VLP and combined approach groups were AO B and C fractures, respectively. The cause of injury and AO fracture classification showed significant differences between the two groups, and there was no difference in age or sex between the two groups. There was no significant difference in ROM between the two groups, but the VLP group presented a better Gartland-Werley score and volar tilt angle, and the combined group presented better maintenance in radial height and articular congruity. CONCLUSIONS: Reduction through the combined palmar and dorsal approach supplemented by bone grafting or dorsal plate fixation is an effective method for the treatment of die-punch distal radius fractures, which provides a new option for the treatment of die-punch fractures.

Volar Capsulodesis With Early Active Motion for the Treatment of Chronic Proximal Interphalangeal Joint Hyperextension Deformity.

PURPOSE: We evaluated the clinical outcomes of a series of patients with hyperextension deformity of the proximal interphalangeal joint treated with volar capsulodesis. METHODS: This retrospective study included 16 patients with symptomatic locking of the proximal interphalangeal joint who underwent volar capsulodesis and were followed for at least 2 years. We excluded patients with severe, degenerative changes on plain radiographs. Clinical evaluation included the Quick Disabilities of the Arm, Shoulder, and Hand questionnaire; Catalano's scale for proximal interphalangeal joint hyperextension deformity correction; a visual analog scale for pain; range of motion; and grip strength. Hyperextension recurrence and residual flexion contracture were also recorded. RESULTS: There were 2 women and 14 men, with a mean age of 36 years (range, 22-60 years). The mean preoperative pain scores according to the visual analog scale were 3.6 (range,1-8) and 0.5 (range, 0-3) at the final follow-up. No patient had a recurrence of the hyperextension deformity. The average Quick Disabilities of the Arm, Shoulder, and Hand score was 5, and the mean grip strength was 87% of the contralateral side. Five patients were rated as having excellent results, 9 patients as having good results, and 2 patients as having fair results. Residual flexion contracture was less than 10° in 13 patients and more than 10° in 3 cases. All patients returned to unrestricted activities. CONCLUSION: Volar capsulodesis with early active motion demonstrated favorable results and could be considered as a surgical option for the treatment of chronic hyperextension deformity of the proximal interphalangeal joint. TYPE OF STUDY/LEVEL OF EVIDENCE: Therapeutic IV.

Load Distribution in Dorsally-Angulated Distal Radius Deformity Using Finite Element Analysis.

PURPOSE: The load axis of the carpals is located on the volar side of the normal distal radius. A volar lunate facet fracture (VLFF) is exposed to volar-shearing stress, which can cause volar displacement of the carpus. A previous biomechanical study reported that the load at the scaphoid fossa was located more dorsally and the pressure at the lunate fossa decreased in a dorsally-angulated model. However, the distal radius load distribution for various volar tilts remains unclear. We speculate that if the volar tilt decreases, the load distribution moves dorsally and decreases the stress on the VLFF. Therefore, we analyzed a dorsally-angulated distal radius model to evaluate changes in the load distribution using finite element analysis. METHODS: A 3-dimensional finite element wrist model was developed using computed tomography images. The ligaments were modeled as tension-only spring elements. We considered the intact wrist model for a volar tilt of 15° and created 5 additional models for volar tilts of 10°, 5°, 0°, -5°, and -10°. RESULTS: As the dorsal angulation increased, the stress distribution moved from volar to dorsal and from the lunate fossa toward the scaphoid fossa. The maximum stress on the volar lunate facet was reduced as volar tilt decreased. The maximum stress was higher on the lunate fossa for volar tilts from 15° to 5°. In contrast, the maximum stress was higher on the scaphoid fossa for volar tilts of ≤0°. CONCLUSIONS: Load transmission moved from volar to dorsal and from the lunate fossa to the scaphoid fossa when the volar tilt decreased. Therefore, a decrease in the volar tilt would reduce the load on the VLFF. CLINICAL RELEVANCE: This study provides surgeons accurate knowledge regarding load distribution of the distal radius for various volar tilts that could be helpful in treating patients with VLFFs.

Complications Following Volar Locking Plate Fixation of Distal Radius Fractures in Adults: A Systematic Review of Randomized Control Trials.

PURPOSE: The purpose of this study was to assess the incidence of postoperative complications following volar locking plate (VLP) fixation of distal radius fractures (DRFs). METHODS: A search using keywords and subject headings to represent the concepts of volar plating and radius fractures was generated. Databases such as MEDLINE (Ovid), Embase (Elsevier), Scopus (Elsevier), and SPORTDiscus (EBSCO) were searched from inception to November 24, 2021, for randomized controlled trials that reported complications following DRF treated with VLP. Inclusion criteria were studies with adult patients (aged ≥18 years) randomized to VLP fixation without other concomitant surgical interventions, with a minimum follow-up of 3 months. Study sample characteristics and post-surgical complications were extracted. The Cochrane Risk of Bias tool was used to evaluate quality of evidence. RESULTS: Of the 4,059 articles identified using the search strategy, 1,778 titles/abstracts and 856 full-text articles were screened for inclusion, of which 35 articles were included for data extraction. Overall, 1,419 patients with a DRF were randomized to VLP fixation. The mean age was 60.3 years. The overall complication rate was 30.8% following VLP fixation, with 12.4% being major complications. The most common complications were median nerve-related (7.1%) and hardware removal (6.8%), secondary to other complications. Tenosynovitis was the most common tendon-related complication (3.4%). Other complications included complex regional pain syndrome (2.4%), malunion (1.3%), superficial wound infections (1.9%), and tendon rupture (1.3%). CONCLUSIONS: A meta-analysis of high-quality studies that discuss the complications after VLP fixation for DRF showed an overall complication rate of 30.8%. VLP may be related to more hardware-related complications than those previously reported. TYPE OF STUDY/LEVEL OF EVIDENCE: Therapeutic II.

Flexor Tendon Attritional Ruptures Following Distal Radius Volar Plate Fixation.

PURPOSE: To investigate patient and radiographic factors that may correlate with the time to flexor tendon rupture following volar plate fixation of distal radius fractures. METHODS: A total of 31 patients who underwent volar plate removal because of flexor tendon rupture were analyzed. Patient demographics and the interval from operative fixation until rupture were determined retrospectively. Volar tilt and lateral carpal alignment were measured radiographically. The Soong classification was used to grade volar plate prominence. The correlation between the duration to tendon rupture and volar tilt, carpal alignment, and age was evaluated. RESULTS: There were 7 men and 24 women. Mean age at the time of hardware removal and flexor tendon management was 66 years (n = 31). Radiographs were classified as Soong 1 (n = 24) and Soong 2 (n = 3). The mean measured volar tilt was -4° (range, -20°-+7°). The mean interval from operative fixation until complete tendon rupture was 4.9 years, (range, 0.3-13.1 years; n = 30). There was no correlation between the time interval to rupture and the magnitude of tilt, carpal alignment, or age at the time of operative fixation. CONCLUSIONS: Although volar plate prominence was present in all patients with flexor tendon ruptures, radiographic parameters including the degree of dorsal tilt, lateral carpal alignment, and patient age did not correlate with the time interval from fixation to tendon rupture. TYPE OF STUDY/LEVEL OF EVIDENCE: Prognostic IV.