Whole-brain mapping of increased manganese levels in welders and its association with exposure and motor function.

Although manganese (Mn) is a trace metal essential for humans, chronic exposure to Mn can cause accumulation of this metal ion in the brain leading to an increased risk of neurological and neurobehavioral health effects. This is a concern for welders exposed to Mn through welding fumes. While brain Mn accumulation in occupational settings has mostly been reported in the basal ganglia, several imaging studies also revealed elevated Mn in other brain areas. Since Mn functions as a magnetic resonance imaging (MRI) T1 contrast agent, we developed a whole-brain MRI approach to map in vivo Mn deposition differences in the brains of non-exposed factory controls and exposed welders. This is a cross-sectional analysis of 23 non-exposed factory controls and 36 exposed full-time welders from the same truck manufacturer. We collected high-resolution 3D MRIs of brain anatomy and R1 relaxation maps to identify regional differences using voxel-based quantification (VBQ) and statistical parametric mapping. Furthermore, we investigated the associations between excess Mn deposition and neuropsychological and motor test performance. Our results indicate that: (1) Using whole-brain MRI relaxometry methods we can generate excess Mn deposition maps in vivo, (2) excess Mn accumulation due to occupational exposure occurs beyond the basal ganglia in cortical areas associated with motor and cognitive functions, (3) Mn likely diffuses along white matter tracts in the brain, and (4) Mn deposition in specific brain regions is associated with exposure (cerebellum and frontal cortex) and motor metrics (cerebellum and hippocampus).

Reconfiguration, Welding, Reprogramming, and Complex Shape Transformation of An Optical Shape Memory Polymer Network Enabled by Patterned Secondary Crosslinking.

Stimuli-triggered generation of complicated 3D shapes from 2D strips or plates without using sophisticated molds is desirable and achieving such 2D-to-3D shape transformation in combination with shape reconfiguration, welding, and reprogramming on a single material is very challenging. Here, a convenient and facile strategy using the solution of a disulfide-containing diamine for patterned secondary crosslinking of an optical shape-memory polymer network is developed to integrate the above performances. The dangling thiolectones attached to the backbones react with the diamine in the solution-deposited region so that the secondary crosslinking may not only weld individual strips into assembled 3D shapes but also suppress the relaxation of the deformed polymer chains to different extents for shape reconfiguration or heating-induced complex 3D deformations. In addition, as the dynamic disulfide bonds can be thermally activated to erase the initial programming information and the excessive thiolectones are available for subsequent patterned crosslinking, the material also allows shape reprogramming. Combining welding with patterning treatment, it is further demonstrated that a gripper can be assembled and photothermally controlled to readily grasp an object.

Pressureless Welding of Temperature-Invariant Multifunctionality Body Based on Hydroxyl-Functionalized Boron Nitride Nanosheets and Bifunctional Monoethanolamine Cross-linker.

Bulk hexagonal boron nitride (h-BN) ceramics with structural integrity, high-temperature resistance and low expansion rate are expected for multifunctional applications in extreme conditions. However, due to its sluggish self-diffusion and intrinsic inertness, it remains a great challenge to overcome high-energy barrier for h-BN powder sintering. Herein, a cross-linking and pressureless-welding strategy is reported to produce bulk boron nitride nanosheets (BNNSs) ceramics with well-crystalized and dense B-N covalent-welding frameworks. The essence of this synthesis strategy lies in the construction of >B─O─H2C─H2C─H2N:→B< bond bridge connection structure among hydroxyl functionalized BNNSs (BNNSs-OH) using bifunctional monoethanolamine (MEA) as cross-linker through esterification and intermolecular-coordination reactions. The prepared BNNSs-interlaced ceramics have densities not less than 1.2 g cm-3, and exhibit exceptional mechanical robustness and resiliency, excellent thermomechanical stability, ultra-low linear thermal expansion coefficient of 0.06 ppm °C-1, and high thermal diffusion coefficient of 4.76 mm2 s-1 at 25 °C and 3.72 mm2 s-1 at 450 °C. This research not only reduces the free energy barrier from h-BN particles to bulk ceramics through facile multi-step physicochemical reaction, but also stimulates further exploration of multifunctional applications for bulk h-BN ceramics over a wide temperature range.

TERT-independent telomere elongation and shelterin dysregulation after pulmonary exposure to stainless-steel welding fume in-vivo.

Telomeres are inert DNA sequences (TTAGGG) at the end of chromosomes that protect genetic information and maintain DNA integrity. Emerging evidence has demonstrated that telomere alteration can be closely related to occupational exposure and the development of various disease conditions, including cancer. However, the functions and underlying molecular mechanisms of telomere alteration and shelterin dysregulation after welding fume exposures have not been broadly defined. In this study, we analyzed telomere length and shelterin complex proteins in peripheral blood mononuclear cells (PBMCs) and in lung tissue recovered from male Sprague-Dawley rats following exposure by intratracheal instillation (ITI) to 2 mg/rat of manual metal arc-stainless steel (MMA-SS) welding fume particulate or saline (vehicle control). PBMCs and lung tissue were harvested at 30 d after instillation. Our study identified telomere elongation and shelterin dysregulation in PBMCs and lung tissue after welding fume exposure. Mechanistically, telomere elongation was independent of telomerase reverse transcriptase (TERT) activation. Collectively, our findings demonstrated that welding fume-induced telomere elongation was (a) TERT-independent and (b) associated with shelterin complex dysregulation. It is possible that an alteration of telomere length and its regulatory proteins may be utilized as predictive biomarkers for various disease conditions after welding fume exposure. This needs further investigation.

Assessing the influence of parameters on tissue welding in small bowel end-to-end anastomosis in vitro and in vivo.

BACKGROUND: The use of high-frequency electric welding technology for intestinal end-to-end anastomosis holds significant promise. Past studies have focused on in vitro, and the safety and efficacy of this technology is uncertain, severely limiting the clinical application of this technology. This study investigates the impact of compression pressure, energy dosage, and duration on anastomotic quality using a homemade anastomosis device in both in vitro and in vivo settings. METHODS: Two hundred eighty intestines and 5 experimental pigs were used for in vitro and in vivo experiments, respectively. The in vitro experiments were conducted to study the effects of initial pressure (50-400 kpa), voltage (40-60 V), and time (10-20 s) on burst pressure, breaking strength, thermal damage, and histopathological microstructure of the anastomosis. Optimal parameters were then inlaid into a homemade anastomosis and used for in vivo experiments to study the postoperative porcine survival rate and the pathological structure of the tissues at the anastomosis and the characteristics of the collagen fibers. RESULTS: The anastomotic strength was highest when the compression pressure was 250 kPa, the voltage was 60 V, and the time was 15 s. The degree of thermal damage to the surrounding tissues was the lowest. The experimental pigs had no adverse reactions after the operation, and the survival rate was 100%. 30 days after the operation, the surgical site healed well, and the tissues at the anastomosis changed from immediate adhesions to permanent connections. CONCLUSION: High-frequency electric welding technology has a certain degree of safety and effectiveness. It has the potential to replace the stapler anastomosis in future and become the next generation of new anastomosis device.

Enhancement of keratinocyte survival and migration elicited by interleukin 24 upregulation in dermal microvascular endothelium upon welding-fume exposure.

Occupational exposure to welding fumes constitutes a serious health concern. Although the effects of fumes on the respiratory tract have been investigated, few apparent reports were published on their effects on the skin. The purpose of this study was to investigate the effects of exposure to welding fumes on skin cells, focusing on interleukin-24 (IL-24), a cytokine involved in the pathophysiology of skin conditions, such as atopic dermatitis and psoriasis. Treatment with welding fumes increased IL-24 expression and production levels in human dermal microvascular endothelial cells (HDMEC) which were higher than that in normal human epidermal keratinocytes. IL-24 levels in Trolox and deferoxamine markedly suppressed welding fume-induced IL-24 expression in HDMEC, indicating that oxidative stress may be involved in this cytokine expression. IL-24 released from HDMEC protected keratinocytes from welding fume-induced damage and enhanced keratinocyte migration. Serum IL-24 was higher in welding workers than in general subjects and was positively correlated with elevated serum levels of 8-hydroxy-2'-deoxyguanosine, an oxidative stress marker. In summary, welding fumes enhanced IL-24 expression in HDMEC, stimulating keratinocyte survival and migration. IL-24 expression in endothelial cells may act as an adaptive response to welding-fume exposure in the skin.

Factors influencing metal concentrations in hair and nails during longitudinal follow-up of apprentice welders.

The aim of this study was to determine factors influencing observed increased metal biomarkers of exposure levels in a group of 116 Quebec apprentice welders during a longitudinal follow-up of exposure. Analysis of 14 metals was carried out in hair, fingernail, and toenail samples taken from participants over the course of their welding curriculum at 6 different times. Personal and socio-demographic characteristics, lifestyle habits, and other potential confounding factors were documented by questionnaire. Multivariate linear mixed-effect models were used to assess main predictors of metal concentrations in each biological matrix including increasing time of exposure throughout the curriculum (defined as the repeated measure "time" variable"). Significant associations between repeated measure "time" variable and metal levels in hair, fingernails, and toenails were found for chromium, iron, manganese and nickel. Significant associations with "time" were also noted for arsenic levels in hair and fingernails, and for barium, cobalt and vanadium levels in fingernails and toenails. The repeated measure "time" variable, hence increasing time of exposure throughout the curriculum, was the predominant predictor of elevated biological metal levels. Reduced spaces and simultaneous activities such as oxyfuel-cutting and welding in the same welding room were suspected to contribute to higher metal levels. Age, ethnicity, and annual household income exerted an effect on metal levels and considered as confounders in the models. Variations observed in metal levels between hair and nails of apprentice welders also emphasized the relevance and importance of performing multi-matrix and multi-element biomonitoring to assess temporal variations in biological metal concentrations during welding curriculum.

Longitudinal changes in cardiovascular disease-related proteins in welders.

OBJECTIVE: Occupational exposure to welding fumes is linked to a higher risk of cardiovascular disease; however, the threshold exposure level is unknown. Here, we aimed to identify changes in proteins associated with cardiovascular disease in relation to exposure to welding fumes. METHODS: Data were obtained from two timepoints six years apart for 338 non-smoking men (171 welders, 167 controls); of these, 174 (78 welders, 96 controls) had measurements available at both timepoints. Exposure was measured as personal respirable dust (adjusted for personal protective equipment), welding years, and cumulative exposure. Proximity extension assays were used to measure a panel of 92 proteins involved in cardiovascular processes in serum samples. Linear mixed models were used for longitudinal analysis. The biological functions and diseases related to the identified proteins were explored using the Ingenuity Pathway Analysis software. RESULTS: At both timepoints, the median respirable dust exposure was 0.7 mg/m3 for the welders. Seven proteins were differentially abundant between the welders and controls and increased incrementally with respirable dust: FGF23, CEACAM8, CD40L, PGF, CXCL1, CD84, and HO1. CD84 was significant after adjusting for multiple comparisons. These proteins have been linked to disorders of blood pressure, damage related to clogged blood vessels, and chronic inflammatory disorders. CONCLUSION: Exposure to mild steel welding fumes below current occupational exposure limits for respirable particles and welding fumes in Europe and the US (1-5 mg/m3) was associated with changes in the abundance of proteins related to cardiovascular disease. Further research should evaluate the utility of these proteins as prospective biomarkers of occupational cardiovascular disease.

Neurological and neurobehavioral effects of welders in Egypt exposed to manganese containing welding fumes.

PURPOSE: Welders are more likely to develop neurobehavioral disorders because of their exposure to neurotoxic metals such as manganese. This study aimed to measure the neurobehavioral performance of welders occupationally exposed to manganese at welding enterprises and its relationship with the workplace environment. METHODS: It is a comparative cross-sectional study carried out on 130 welders working at 50 welding enterprises in Menoufia governorate, Egypt, compared to 130 non-occupationally exposed controls. RESULTS: It was found that the environments of the studied welding enterprises had levels of respirable dust, manganese, and total welding fumes that exceeded internationally permissible limits. In addition, the mean blood manganese levels were significantly higher among welders (4.16 ± 0.61) than the controls (1.72 ± 0.41). Welders had a significantly higher prevalence of neurological manifestations and lower performance of neurobehavioral tests. Lower neurobehavioral performance among welders was significantly correlated with increased work duration and blood levels in some tests. CONCLUSION: To lessen the fumes in the breathing zone of workers, it is therefore strongly recommended to regularly wear high-quality personal protective equipment, especially masks, and to ensure proper ventilation.

Impact of welding occupation on serum aluminium level and its association with physical health, cognitive function, and quality of life: a cross-sectional study.

OBJECTIVE: There is an occupational health concern about welders' inhalation of toxic aluminium fumes. We investigated whether serum aluminium level (SAL) and demographic variables can significantly predict physical health parameters, cognition, and quality of life (QoL) among welders. METHODS: The cross-sectional study involved 100 age- and location-matched men (50 welders and 50 non-welders). SAL obtained using a graphite furnace atomic absorption spectrometer, and data collected using blood pressure and body mass index (BMI) apparatuses, biodata form, pain rating scale, General Practitioner Assessment of Cognition, WHOQoL-BREF, and Nordic musculoskeletal symptoms (MSS) questionnaire were analysed using independent samples t test, chi-square, Pearson's correlation, and hierarchical linear regression. RESULTS: Welders had significantly higher SAL (mean difference [MD] = 1.77 µg/L, p < 0.001), lower QoL (MD = 3.92, p = 0.039), and higher prevalence of MSS on the neck (χ2 = 10.187, p = 0.001), shoulder (χ2 = 9.007, p = 0.003), upper back (χ2 = 6.832, p = 0.009), and knee (χ2 = 12.190, p < 0.001) than non-welders. There was a significant bivariate association between SAL, systolic blood pressure (ß = 0.313, p = 0.002), and BMI (ß = 0.279, p = 0.005), but not pain intensity, cognition, or QoL. SAL remained a significant predictor of systolic blood pressure after adjustment for physical health and QoL parameters (ß = 0.191, p = 0.044). The association between SAL and social QoL became significant after adjustment for physical health and other QoL domains (ß = - 0.210, p = 0.032) and demographic variables (ß = - 0.233, p = 0.046). CONCLUSION: Welders had significantly higher SAL, musculoskeletal symptoms, blood pressure, and lower QoL than non-welders. SAL was associated with adverse physical health parameters and social-related QoL, not cognition. We recommend routine aluminium bioavailability and physical health checks among welders.