A secure worst elite sailfish optimizer based routing and deep learning for black hole attack detection.

The Wireless Sensor Network (WSN) is susceptible to two kinds of attacks, namely active attack and passive attack. In an active attack, the attacker directly communicates with the target system or network. In contrast, in passive attack, the attacker is in indirect contact with the network. To preserve the functionality and dependability of wireless sensor networks, this research has been conducted recently to detect and mitigate the black hole attacks. In this research, a Deep learning (DL) based black hole attack detection model is designed. The WSN simulation is the beginning stage of this process. Moreover, routing is the key process, where the data is passed to the base station (BS) via the shortest and finest route. The proposed Worst Elite Sailfish Optimization (WESFO) is utilized for routing. Moreover, black hole attack detection is performed in the BS. The Auto Encoder (AE) is employed in attack detection, which is trained with the use of the proposed WESFO algorithm. Additionally, the proposed model is validated in terms of delay, Packet Delivery Rate (PDR), throughput, False-Negative Rate (FNR), and False-Positive Rate (FPR) parameters with the corresponding outcomes like 25.64 s, 94.83%, 119.3, 0.084, and 0.135 are obtained.

Internet-of-Things for smart irrigation control and crop recommendation using interactive guide-deep model in Agriculture 4.0 applications.

The rapid advancements in Agriculture 4.0 have led to the development of the continuous monitoring of the soil parameters and recommend crops based on soil fertility to improve crop yield. Accordingly, the soil parameters, such as pH, nitrogen, phosphorous, potassium, and soil moisture are exploited for irrigation control, followed by the crop recommendation of the agricultural field. The smart irrigation control is performed utilizing the Interactive guide optimizer-Deep Convolutional Neural Network (Interactive guide optimizer-DCNN), which supports the decision-making regarding the soil nutrients. Specifically, the Interactive guide optimizer-DCNN classifier is designed to replace the standard ADAM algorithm through the modeled interactive guide optimizer, which exhibits alertness and guiding characters from the nature-inspired dog and cat population. In addition, the data is down-sampled to reduce redundancy and preserve important information to improve computing performance. The designed model attains an accuracy of 93.11 % in predicting the minerals, pH value, and soil moisture thereby, exhibiting a higher recommendation accuracy of 97.12% when the model training is fixed at 90%. Further, the developed model attained the F-score, specificity, sensitivity, and accuracy values of 90.30%, 92.12%, 89.56%, and 86.36% with k-fold 10 in predicting the minerals that revealed the efficacy of the model.

Optimizing Rule Weights to Improve FRBS Clustering in Wireless Sensor Networks.

Wireless sensor networks (WSNs) are usually composed of tens or hundreds of nodes powered by batteries that need efficient resource management to achieve the WSN's goals. One of the techniques used to manage WSN resources is clustering, where nodes are grouped into clusters around a cluster head (CH), which must be chosen carefully. In this article, a new centralized clustering algorithm is presented based on a Type-1 fuzzy logic controller that infers the probability of each node becoming a CH. The main novelty presented is that the fuzzy logic controller employs three different knowledge bases (KBs) during the lifetime of the WSN. The first KB is used from the beginning to the instant when the first node depletes its battery, the second KB is then applied from that moment to the instant when half of the nodes are dead, and the last KB is loaded from that point until the last node runs out of power. These three KBs are obtained from the original KB designed by the authors after an optimization process. It is based on a particle swarm optimization algorithm that maximizes the lifetime of the WSN in the three periods by adjusting each rule in the KBs through the assignment of a weight value ranging from 0 to 1. This optimization process is used to obtain better results in complex systems where the number of variables or rules could make them unaffordable. The results of the presented optimized approach significantly improved upon those from other authors with similar methods. Finally, the paper presents an analysis of why some rule weights change more than others, in order to design more suitable controllers in the future.

Deploying Wireless Sensor Networks in Multi-Story Buildings toward Internet of Things-Based Intelligent Environments: An Empirical Study.

With the growing integration of the Internet of Things in smart buildings, it is crucial to ensure the precise implementation and operation of wireless sensor networks (WSNs). This paper aims to study the implementation aspect of WSNs in a commercial multi-story building, specifically addressing the difficulty of dealing with the variable environmental conditions on each floor. This research addresses the disparity between simulated situations and actual deployments, offering valuable insights into the potential to significantly improve the efficiency and responsiveness of building management systems. We obtain real-time sensor data to analyze and evaluate the system's performance. Our investigation is grounded in the growing importance of incorporating WSNs into buildings to create intelligent environments. We provide an in-depth analysis for scrutinizing the disparities and commonalities between the datasets obtained from real-world deployments and simulation. The results obtained show the significance of accurate simulation models for reliable data representation, providing a roadmap for further developments in the integration of WSNs into intelligent building scenarios. This research's findings highlight the potential for optimizing living and working conditions based on the real-time monitoring of critical environmental parameters. This includes insights into temperature, humidity, and light intensity, offering opportunities for enhanced comfort and efficiency in intelligent environments.

Low-Cost, Low-Power Edge Computing System for Structural Health Monitoring in an IoT Framework.

A complete low-power, low-cost and wireless solution for bridge structural health monitoring is presented. This work includes monitoring nodes with modular hardware design and low power consumption based on a control and resource management board called CoreBoard, and a specific board for sensorization called SensorBoard is presented. The firmware is presented as a design of FreeRTOS parallelised tasks that carry out the management of the hardware resources and implement the Random Decrement Technique to minimize the amount of data to be transmitted over the NB-IoT network in a secure way. The presented solution is validated through the characterization of its energy consumption, which guarantees an autonomy higher than 10 years with a daily 8 min monitoring periodicity, and two deployments in a pilot laboratory structure and the Eduardo Torroja bridge in Posadas (Córdoba, Spain). The results are compared with two different calibrated commercial systems, obtaining an error lower than 1.72% in modal analysis frequencies. The architecture and the results obtained place the presented design as a new solution in the state of the art and, thanks to its autonomy, low cost and the graphical device management interface presented, allow its deployment and integration in the current IoT paradigm.

Artificial Neural Network-Based Mechanism to Detect Security Threats in Wireless Sensor Networks.

Wireless sensor networks (WSNs) are essential in many areas, from healthcare to environmental monitoring. However, WSNs are vulnerable to routing attacks that might jeopardize network performance and data integrity due to their inherent vulnerabilities. This work suggests a unique method for enhancing WSN security through the detection of routing threats using feed-forward artificial neural networks (ANNs). The proposed solution makes use of ANNs' learning capabilities to model the network's dynamic behavior and recognize routing attacks like black-hole, gray-hole, and wormhole attacks. CICIDS2017 is a heterogeneous dataset that was used to train and test the proposed system in order to guarantee its robustness and adaptability. The system's ability to recognize both known and novel attack patterns enhances its efficacy in real-world deployment. Experimental assessments using an NS2 simulator show how well the proposed method works to improve routing protocol security. The proposed system's performance was assessed using a confusion matrix. The simulation and analysis demonstrated how much better the proposed system performs compared to the existing methods for routing attack detection. With an average detection rate of 99.21% and a high accuracy of 99.49%, the proposed system minimizes the rate of false positives. The study advances secure communication in WSNs and provides a reliable means of protecting sensitive data in resource-constrained settings.

Improved Cell Allocation Strategies Using K-Means Clustering in Congested 6TiSCH Environments.

The 6TiSCH protocol (IEEE 802.15.4e) is crucial for the Industrial Internet of Things (IIoT), utilizing a time-slotted channel hopping (TSCH) mode based on node distribution. In this study, we propose an innovative cell allocation strategy based on node position clustering using the K-means algorithm, specifically designed to address congestion and optimize resource distribution in the 6TiSCH network. Our mechanism effectively groups nodes into clusters, allowing for dynamic adjustment of cell capacities in congested areas by analyzing traffic patterns and the spatial distribution of nodes. This clustering approach enhances the efficiency of slot frame utilization and minimizes communication delays by reducing interference and improving routing stability. The proposed strategy leverages the clustering results to improve cell usage efficiency and reduce communication latency between nodes. By tailoring cell allocation to the specific traffic needs of each cluster, we significantly reduce packet loss, manage congestion more effectively, and enhance data transmission reliability. We evaluated the clustering method using the K-means algorithm through experiments with the 6TiSCH simulator. Additionally, we considered using objective functions in Routing Protocol for Low-Power and Lossy Networks (RPL), such as OF0 and MRHOF, to assess clustering results and their impact on throughput and packet delivery. Our method resulted in significantly improved average performance metrics. Under the OF0 routing protocol, we achieved a 30.01% latency reduction, a 15.95% faster joining time, an 8% higher packet delivery ratio, and a 13.82% throughput increase. Similarly, we observed a 12.34% improvement in packet delivery ratio, 21.06% latency reduction, 12.68% faster joining time, and 25.97% higher throughput speed with the MRHOF routing protocol. These findings highlight the effectiveness of the improved cell allocation strategy in congested 6TiSCH environments, offering a better solution for enhancing network performance in IIoT applications.

Reliability Assessment of Wireless Sensor Networks by Strain-Based Region Analysis for Redundancy Estimation in Measurements on the Example of an Aircraft Wing Box.

Wireless sensor networks (WSNs) are attracting increasing research interest due to their ability to monitor large areas independently. Their reliability is a crucial issue, as it is influenced by hardware, data, and energy-related factors such as loading conditions, signal attenuation, and battery lifetime. Proper selection of sensor node positions is essential to maximise system reliability during the development of products equipped with WSNs. For this purpose, this paper presents an approach to estimate WSN system reliability during the development phase based on the analysis of measurements, using strain measurements in finite element (FE) models as an example. The approach involves dividing the part under consideration into regions with similar strains using a region growing algorithm (RGA). The WSN configuration is then analysed for reliability based on data paths and measurement redundancy resulting from the sensor positions in the identified measuring regions. This methodology was tested on an exemplary WSN configuration at an aircraft wing box under bending load and found to effectively estimate the hardware perspective on system reliability. Therefore, the methodology and algorithm show potential for optimising sensor node positions to achieve better reliability results.

Tessellation-Based Construction of Air Route for Wireless Sensor Networks Employing UAV.

In this paper, we consider a wireless sensor network consisting of an unmanned aerial vehicle (UAV) acting as a sink node and a number of sensor nodes scattered uncertainly on the ground. In the network, the UAV flies to a spatial point called point of interest and hovers to collect environmental data from neighboring sensor nodes. Then, the UAV proceeds to the next point of interest. The UAV must gather data from all the sensor nodes. On the other hand, a shorter round-trip air route of the UAV is more preferred since a battery-operated UAV needs regular recharging. To satisfy the requirement and to adhere to the recommendation as well, especially in the situation where only vague locational information about sensor nodes is available, we propose a scheme that follows three steps. First, it covers the sensor field of the wireless sensor network with three categories of hexagonal tessellations. Secondly, it establishes a point of interest at the centroid of each tile. Thirdly, it constructs an air route of the UAV, which visits every point of interest along a Hamiltonian cycle on the induced graph. Next, we develop a closed-form expression for the exact flight distance attained by the proposed scheme. For comparative evaluation, we discover some optimal schemes that minimize the flight distance by completely inspecting all patterns and corroborating the property of Hamiltonicity. The flight distance along the air route constructed by the proposed scheme is found to be only slightly longer than the flight distance yielded by an optimal scheme. Furthermore, the proposed scheme is proven to be practically valid when a common multicopter is employed as the sink node.

SWARAM: Osprey Optimization Algorithm-Based Energy-Efficient Cluster Head Selection for Wireless Sensor Network-Based Internet of Things.

The Internet of Things (IoT) has transformed various aspects of human life nowadays. In the IoT transformative paradigm, sensor nodes are enabled to connect multiple physical devices and systems over the network to collect data from remote places, namely, precision agriculture, wildlife conservation, intelligent forestry, and so on. The battery life of sensor nodes is limited, affecting the network's lifetime, and requires continuous maintenance. Energy conservation has become a severe problem of IoT. Clustering is essential in IoT to optimize energy efficiency and network longevity. In recent years, many clustering protocols have been proposed to improve network lifetime by conserving energy. However, the network experiences an energy-hole issue due to picking an inappropriate Cluster Head (CH). CH node is designated to manage and coordinate communication among nodes in a particular cluster. The redundant data transmission is avoided to conserve energy by collecting and aggregating from other nodes in clusters. CH plays a pivotal role in achieving efficient energy optimization and network performance. To address this problem, we have proposed an osprey optimization algorithm based on energy-efficient cluster head selection (SWARAM) in a wireless sensor network-based Internet of Things to pick the best CH in the cluster. The proposed SWARAM approach consists of two phases, namely, cluster formation and CH selection. The nodes are clustered using Euclidean distance before the CH node is selected using the SWARAM technique. Simulation of the proposed SWARAM algorithm is carried out in the MATLAB2019a tool. The performance of the SWARAM algorithm compared with existing EECHS-ARO, HSWO, and EECHIGWO CH selection algorithms. The suggested SWARAM improves packet delivery ratio and network lifetime by 10% and 10%, respectively. Consequently, the overall performance of the network is improved.

Multipurpose Modular Wireless Sensor for Remote Monitoring and IoT Applications.

Today, maintaining an Internet connection is indispensable; as an example, we can refer to IoT applications that can be found in fields such as environmental monitoring, smart manufacturing, healthcare, smart buildings, smart homes, transportation, energy, and others. The critical elements in IoT applications are both the Wireless Sensor Nodes (WSn) and the Wireless Sensor Networks. It is essential to state that designing an application demands a particular design of a WSn, which represents an important time consumption during the process. In line with this observation, our work describes the development of a modular WSn (MWSn) built with digital processing, wireless communication, and power supply subsystems. Then, we reduce the WSn-implementing process into the design of its modular sensing subsystem. This would allow the development and launching processes of IoT applications across different fields to become faster and easier. Our proposal presents a versatile communication between the sensing modules and the MWSn using one- or two-wired communication protocols, such as I2C. To validate the efficiency and versatility of our proposal, we present two IoT-based remote monitoring applications.

Trustworthy Localization in IoT Networks: A Survey of Localization Techniques, Threats, and Mitigation.

The Internet of Things (IoT) has revolutionized the world, connecting billions of devices that offer assistance in various aspects of users' daily lives. Context-aware IoT applications exploit real-time environmental, user-specific, or situational data to dynamically adapt to users' needs, offering tailored experiences. In particular, Location-Based Services (LBS) exploit geographical information to adapt to environmental settings or provide recommendations based on users' and nodes' positions, thus delivering efficient and personalized services. To this end, there is growing interest in developing IoT localization systems within the scientific community. In addition, due to the sensitivity and privacy inherent to precise location information, LBS introduce new security challenges. To ensure a more secure and trustworthy system, researchers are studying how to prevent vulnerabilities and mitigate risks from the early design stages of LBS-empowered IoT applications. The goal of this study is to carry out an in-depth examination of localization techniques for IoT, with an emphasis on both the signal-processing design and security aspects. The investigation focuses primarily on active radio localization techniques, classifying them into range-based and range-free algorithms, while also exploring hybrid approaches. Next, security considerations are explored in depth, examining the main attacks for each localization technique and linking them to the most interesting solutions proposed in the literature. By highlighting advances, analyzing challenges, and providing solutions, the survey aims to guide researchers in navigating the complex IoT localization landscape.

Smart Wireless Transducer Dedicated for Use in Aviation Laboratories.

Reliable testing of aviation components depends on the quality and configuration flexibility of measurement systems. In a typical approach to test instrumentation, there are tens or hundreds of sensors on the test head and test facility, which are connected by wires to measurement cards in control cabinets. The preparation of wiring and the setup of measurement systems are laborious tasks requiring diligence. The use of smart wireless transducers allows for a new approach to test preparation by reducing the number of wires. Moreover, additional functionalities like data processing, alarm-level monitoring, compensation, or self-diagnosis could improve the functionality and accuracy of measurement systems. A combination of low power consumption, wireless communication, and wireless power transfer could speed up the test-rig instrumentation process and bring new test possibilities, e.g., long-term testing of moving or rotating components. This paper presents the design of a wireless smart transducer dedicated for use with sensors typical of aviation laboratories such as thermocouples, RTDs (Resistance Temperature Detectors), strain gauges, and voltage output integrated sensors. The following sections present various design requirements, proposed technical solutions, a study of battery and wireless power supply possibilities, assembly, and test results. All presented tests were carried out in the Components Test Laboratory located at the Lukasiewicz Research Network-Institute of Aviation.

Stability Analysis through a Stability Factor Metric for IQRF Mesh Sensor Networks Utilizing Merged Data Collection.

This paper introduces a novel stability metric specifically developed for IQRF wireless mesh sensor networks, emphasizing flooding routing and data collection methodologies, particularly IQRF's Fast Response Command (FRC) technique. A key feature of this metric is its ability to ensure network resilience against disruptions by effectively utilizing redundant paths in the network. This makes the metric an indispensable tool for field engineers in both the design and deployment of wireless sensor networks. Our findings provide valuable insights, demonstrating the metric's efficacy in achieving robust and reliable network operations, especially in data collection tasks. The inclusion of redundant paths as a factor in the stability metric significantly enhances its practicality and relevance. Furthermore, this research offers practical ideas for enhancing the design and management of wireless mesh sensor networks. The stability metric uniquely assesses the resilience of data collection activities within these networks, with a focus on the benefits of redundant paths, underscoring the significance of stability in network evaluation.

A Self-Localization Algorithm for Mobile Targets in Indoor Wireless Sensor Networks Using Wake-Up Media Access Control Protocol.

Indoor localization of a mobile target represents a prominent application within wireless sensor network (WSN), showcasing significant values and scientific interest. Interference, obstacles, and energy consumption are critical challenges for indoor applications and battery replacements. A proposed tracking system deals with several factors such as latency, energy consumption, and accuracy presenting an innovative solution for the mobile localization application. In this paper, a novel algorithm introduces a self-localization algorithm for mobile targets using the wake-up media access control (MAC) protocol. The developed tracking application is based on the trilateration technique with received signal strength indication (RSSI) measurements. Simulations are implemented in the objective modular network testbed in C++ (OMNeT++) discrete event simulator using the C++ programming language, and the RSSI values introduced are based on real indoor measurements. In addition, a determination approach for finding the optimal parameters of RSSI is assigned to implement for the simulation parameters. Simulation results show a significant reduction in power consumption and exceptional accuracy, with an average error of 1.91 m in 90% of cases. This method allows the optimization of overall energy consumption, which consumes only 2.69% during the localization of 100 different positions.

An Accurate Anchor-Free Contextual Received Signal Strength Approach Localization in a Wireless Sensor Network.

Sensor localization remains a crucial function within the context of wireless sensor networks (WSNs) and is a delicate concern that has attracted many researchers' attention. Undoubtedly, a good distance estimation between different wireless sensors allows us to estimate their accurate locations in the network well. In this article, we present a simple but very effective anchor-free localization scheme for wireless sensor networks called the contextual received signal strength approach (CRSSA) localization scheme. We use the received signal strength (RSS) values and the contextual network connectivity within an anchor-free WSN. We present and thoroughly analyze a novel joint estimation methodology for determining the range, path loss exponent (PLE), and inter-node distances in a composite fading model that addresses small-scale multipath fading and large-scale path loss shadowing effects. We formulate analytical expressions for key parameters, the node's communication range and the PLE value, as functions of the sensor's number, the network's connectivity, and the network density. Once these parameters are estimated, we estimate the inter-node distances and the positions of nodes, with relatively high accuracy, based on the assumed propagation model in a two-dimensional anchor-free WSN. The effectiveness of the CRSSA is evaluated through extensive simulations assuring its estimation accuracy in anchor-free localization.

Enabling Seamless Connectivity: Networking Innovations in Wireless Sensor Networks for Industrial Application.

The wide-ranging applications of the Internet of Things (IoT) show that it has the potential to revolutionise industry, improve daily life, and overcome global challenges. This study aims to evaluate the performance scalability of mature industrial wireless sensor networks (IWSNs). A new classification approach for IoT in the industrial sector is proposed based on multiple factors and we introduce the integration of 6LoWPAN (IPv6 over low-power wireless personal area networks), message queuing telemetry transport for sensor networks (MQTT-SN), and ContikiMAC protocols for sensor nodes in an industrial IoT system to improve energy-efficient connectivity. The Contiki COOJA WSN simulator was applied to model and simulate the performance of the protocols in two static and moving scenarios and evaluate the proposed novelty detection system (NDS) for network intrusions in order to identify certain events in real time for realistic dataset analysis. The simulation results show that our method is an essential measure in determining the number of transmissions required to achieve a certain reliability target in an IWSNs. Despite the growing demand for low-power operation, deterministic communication, and end-to-end reliability, our methodology of an innovative sensor design using selective surface activation induced by laser (SSAIL) technology was developed and deployed in the FTMC premises to demonstrate its long-term functionality and reliability. The proposed framework was experimentally validated and tested through simulations to demonstrate the applicability and suitability of the proposed approach. The energy efficiency in the optimised WSN was increased by 50%, battery life was extended by 350%, duplicated packets were reduced by 80%, data collisions were reduced by 80%, and it was shown that the proposed methodology and tools could be used effectively in the development of telemetry node networks in new industrial projects in order to detect events and breaches in IoT networks accurately. The energy consumption of the developed sensor nodes was measured. Overall, this study performed a comprehensive assessment of the challenges of industrial processes, such as the reliability and stability of telemetry channels, the energy efficiency of autonomous nodes, and the minimisation of duplicate information transmission in IWSNs.

Comparative Analysis of Time-Slotted Channel Hopping Schedule Optimization Using Priority-Based Customized Differential Evolution Algorithm in Heterogeneous IoT Networks.

The Time-Slotted Channel Hopping (TSCH) protocol is known for its suitability in highly reliable applications within industrial wireless sensor networks. One of the most significant challenges in TSCH is determining a schedule with a minimal slotframe size that can meet the required throughput for a heterogeneous network. We proposed a Priority-based Customized Differential Evolution (PCDE) algorithm based on the determination of a collision- and interference-free transmission graph. Our schedule can encompass sensors with different data rates in the given slotframe size. This study presents a comprehensive performance evaluation of our proposed algorithm and compares the results to the Traffic-Aware Scheduling Algorithm (TASA). Sufficient simulations were performed to evaluate different metrics such as the slotframe size, throughput, delay, time complexity, and Packet Delivery Ratio (PDR) to prove that our approach achieves a significant result compared with this method.

A Mathematical Programming Approach for IoT-Enabled, Energy-Efficient Heterogeneous Wireless Sensor Network Design and Implementation.

The Internet of Things (IoT) is playing a pivotal role in transforming various industries, and Wireless Sensor Networks (WSNs) are emerging as the key drivers of this innovation. This research explores the utilization of a heterogeneous network model to optimize the deployment of sensors in agricultural settings. The primary objective is to strategically position sensor nodes for efficient energy consumption, prolonged network lifetime, and dependable data transmission. The proposed strategy incorporates an offline model for placing sensor nodes within the target region, taking into account the coverage requirements and network connectivity. We propose a two-stage centralized control model that ensures cohesive decision making, grouping sensor nodes into protective boxes. This grouping facilitates shared resource utilization, including batteries and bandwidth, while minimizing box number for cost-effectiveness. Noteworthy contributions of this research encompass addressing connectivity and coverage challenges through an offline deployment model in the first stage, and resolving real-time adaptability concerns using an online energy optimization model in the second stage. Emphasis is placed on the energy efficiency, achieved through the sensor consolidation within boxes, minimizing data transmission hops, and considering energy expenditures in sensing, transmitting, and active/sleep modes. Our simulations on an agricultural farmland highlights its practicality, particularly focusing on the sensor placement for measuring soil temperature and humidity. Hardware tests validate the proposed model, incorporating parameters from the real-world implementation to enhance calculation accuracy. This study provides not only theoretical insights but also extends its relevance to smart farming practices, illustrating the potential of WSNs in revolutionizing sustainable agriculture.

Energy Consumption Analysis for Continuous Phase Modulation in Smart-Grid Internet of Things of beyond 5G.

Wireless sensor network (WSN) underpinning the smart-grid Internet of Things (SG-IoT) has been a popular research topic in recent years due to its great potential for enabling a wide range of important applications. However, the energy consumption (EC) characteristic of sensor nodes is a key factor that affects the operational performance (e.g., lifetime of sensors) and the total cost of ownership of WSNs. In this paper, to find the modulation techniques suitable for WSNs, we investigate the EC characteristic of continuous phase modulation (CPM), which is an attractive modulation scheme candidate for WSNs because of its constant envelope property. We first develop an EC model for the sensor nodes of WSNs by considering the circuits and a typical communication protocol that relies on automatic repeat request (ARQ)-based retransmissions to ensure successful data delivery. Then, we use this model to analyze the EC characteristic of CPM under various configurations of modulation parameters. Furthermore, we compare the EC characteristic of CPM with that of other representative modulation schemes, such as offset quadrature phase-shift keying (OQPSK) and quadrature amplitude modulation (QAM), which are commonly used in communication protocols of WSNs. Our analysis and simulation results provide insights into the EC characteristics of multiple modulation schemes in the context of WSNs; thus, they are beneficial for designing energy-efficient SG-IoT in the beyond-5G (B5G) and the 6G era.