Identification of FtpA, a Dps-Like Protein Involved in Anti-Oxidative Stress and Virulence in Actinobacillus pleuropneumoniae.

Bacteria have evolved a variety of enzymes to eliminate endogenous or host-derived oxidative stress factors. The Dps protein, first identified in Escherichia coli, contains a ferroxidase center, and protects bacteria from reactive oxygen species damage. Little is known of the role of Dps-like proteins in bacterial pathogenesis. Actinobacillus pleuropneumoniae causes pleuropneumonia, a respiratory disease of swine. The A. pleuropneumoniae ftpA gene is upregulated during shifts to anaerobiosis, in biofilms and, as found in this study, in the presence of H2O2. An A. pleuropneumoniae ftpA deletion mutant (ΔftpA) had increased H2O2 sensitivity, decreased intracellular viability in macrophages, and decreased virulence in a mouse infection model. Expression of ftpA in an E. coli dps mutant restored wild-type H2O2 resistance. FtpA possesses a conserved ferritin domain containing a ferroxidase site. Recombinant rFtpA bound and oxidized Fe2+ reversibly. Under aerobic conditions, the viability of an ΔftpA mutant was reduced compared with the wild-type strain after extended culture, upon transition from anaerobic to aerobic conditions, and upon supplementation with Fenton reaction substrates. Under anaerobic conditions, the addition of H2O2 resulted in a more severe growth defect of ΔftpA than it did under aerobic conditions. Therefore, by oxidizing and mineralizing Fe2+, FtpA alleviates the oxidative damage mediated by intracellular Fenton reactions. Furthermore, by mutational analysis, two residues were confirmed to be critical for Fe2+ binding and oxidization, as well as for A. pleuropneumoniae H2O2 resistance. Taken together, the results of this study demonstrate that A. pleuropneumoniae FtpA is a Dps-like protein, playing critical roles in oxidative stress resistance and virulence. IMPORTANCE As a ferroxidase, Dps of Escherichia coli can protect bacteria from reactive oxygen species damage, but its role in bacterial pathogenesis has received little attention. In this study, FtpA of the swine respiratory pathogen A. pleuropneumoniae was identified as a new Dps-like protein. It facilitated A. pleuropneumoniae resistance to H2O2, survival in macrophages, and infection in vivo. FtpA could bind and oxidize Fe2+ through two important residues in its ferroxidase site and protected the bacteria from oxidative damage mediated by the intracellular Fenton reaction. These findings provide new insights into the role of the FtpA-based antioxidant system in the pathogenesis of A. pleuropneumoniae, and the conserved Fe2+ binding ligands in Dps/FtpA provide novel drug target candidates for disease prevention.

Actinobacillus utilizes a binding protein-dependent ABC transporter to acquire the active form of vitamin B6.

Bacteria require high-efficiency uptake systems to survive and proliferate in nutrient-limiting environments, such as those found in host organisms. ABC transporters in the bacterial plasma membrane provide a mechanism for transport of many substrates. In this study, we examine an operon containing a periplasmic binding protein in Actinobacillus for its potential role in nutrient acquisition. The electron density map of 1.76 Å resolution obtained from the crystal structure of the periplasmic binding protein was best fit with a molecular model containing a pyridoxal-5'-phosphate (P5P/pyridoxal phosphate/the active form of vitamin B6) ligand within the protein's binding site. The identity of the P5P bound to this periplasmic binding protein was verified by isothermal titration calorimetry, microscale thermophoresis, and mass spectrometry, leading us to name the protein P5PA and the operon P5PAB. To illustrate the functional utility of this uptake system, we introduced the P5PAB operon from Actinobacillus pleuropneumoniae into an Escherichia coli K-12 strain that was devoid of a key enzyme required for P5P synthesis. The growth of this strain at low levels of P5P supports the functional role of this operon in P5P uptake. This is the first report of a dedicated P5P bacterial uptake system, but through bioinformatics, we discovered homologs mainly within pathogenic representatives of the Pasteurellaceae family, suggesting that this operon exists more widely outside the Actinobacillus genus.

An enzyme-based protocol for cell-free synthesis of nature-identical capsular oligosaccharides from Actinobacillus pleuropneumoniae serotype 1.

Actinobacillus pleuropneumoniae (App) is the etiological agent of acute porcine pneumonia and responsible for severe economic losses worldwide. The capsule polymer of App serotype 1 (App1) consists of [4)-GlcNAc-ß(1,6)-Gal-α-1-(PO4-] repeating units that are O-acetylated at O-6 of the GlcNAc. It is a major virulence factor and was used in previous studies in the successful generation of an experimental glycoconjugate vaccine. However, the application of glycoconjugate vaccines in the animal health sector is limited, presumably because of the high costs associated with harvesting the polymer from pathogen culture. Consequently, here we exploited the capsule polymerase Cps1B of App1 as an in vitro synthesis tool and an alternative for capsule polymer provision. Cps1B consists of two catalytic domains, as well as a domain rich in tetratricopeptide repeats (TPRs). We compared the elongation mechanism of Cps1B with that of a ΔTPR truncation (Cps1B-ΔTPR). Interestingly, the product profiles displayed by Cps1B suggested processive elongation of the nascent polymer, whereas Cps1B-ΔTPR appeared to work in a more distributive manner. The dispersity of the synthesized products could be reduced by generating single-action transferases and immobilizing them on individual columns, separating the two catalytic activities. Furthermore, we identified the O-acetyltransferase Cps1D of App1 and used it to modify the polymers produced by Cps1B. Two-dimensional NMR analyses of the products revealed O-acetylation levels identical to those of polymer harvested from App1 culture supernatants. In conclusion, we have established a protocol for the pathogen-free in vitro synthesis of tailored, nature-identical App1 capsule polymers.

High Sensitivity Crosslink Detection Coupled With Integrative Structure Modeling in the Mass Spec Studio.

The Mass Spec Studio package was designed to support the extraction of hydrogen-deuterium exchange and covalent labeling data for a range of mass spectrometry (MS)-based workflows, to integrate with restraint-driven protein modeling activities. In this report, we present an extension of the underlying Studio framework and provide a plug-in for crosslink (XL) detection. To accommodate flexibility in XL methods and applications, while maintaining efficient data processing, the plug-in employs a peptide library reduction strategy via a presearch of the tandem-MS data. We demonstrate that prescoring linear unmodified peptide tags using a probabilistic approach substantially reduces search space by requiring both crosslinked peptides to generate sparse data attributable to their linear forms. The method demonstrates highly sensitive crosslink peptide identification with a low false positive rate. Integration with a Haddock plug-in provides a resource that can combine multiple sources of data for protein modeling activities. We generated a structural model of porcine transferrin bound to TbpB, a membrane-bound receptor essential for iron acquisition in Actinobacillus pleuropneumoniae Using mutational data and crosslinking restraints, we confirm the mechanism by which TbpB recognizes the iron-loaded form of transferrin, and note the requirement for disparate sources of restraint data for accurate model construction. The software plugin is freely available at www.msstudio.ca.

Insights into the bacterial transferrin receptor: the structure of transferrin-binding protein B from Actinobacillus pleuropneumoniae.

Pathogenic bacteria from the Neisseriaceae and Pasteurellacea families acquire iron directly from the host iron-binding glycoprotein, transferrin (Tf), in a process mediated by surface receptor proteins that directly bind host Tf, extract the iron, and transport it across the outer membrane. The bacterial Tf receptor is comprised of a surface exposed lipoprotein, Tf-binding protein B (TbpB), and an integral outer-membrane protein, Tf-binding protein A (TbpA), both of which are essential for survival in the host. In this study, we report the 1.98 A resolution structure of TbpB from the porcine pathogen Actinobacillus pleuropneumoniae, providing insights into the mechanism of Tf binding and the role of TbpB. A model for the complex of TbpB bound to Tf is proposed. Mutation of a single surface-exposed Phe residue on TbpB within the predicted interface completely abolishes binding to Tf, suggesting that the TbpB N lobe comprises the sole high-affinity binding region for Tf.

The lipopolysaccharide core of Actinobacillus suis and its relationship to those of Actinobacillus pleuropneumoniae.

The Gram-negative bacteria Actinobacillus suis colonizes the upper respiratory and genital tracts of swine. Along with capsular polysaccharides, lipopolysaccharides (O-chain→core→lipid A~cell) are a main cell-surface component of A. suis. In this study, we determined that A. suis lipopolysaccharide incorporates a conserved core that shares some structural features with several core types of A. pleuropneumoniae . These common core structural features likely account for the observed serological cross-reactivity between A. suis and A. pleuropneumoniae, and the data suggest that the structural epitopes responsible for immunogenicity are those in the outer core domain.

A new rapid and micro-scale hydrolysis, using triethylamine citrate, for lipopolysaccharide characterization by mass spectrometry.

Endotoxin (lipopolysaccharide, LPS) is, in general, composed of two moieties: a hydrophilic polysaccharide linked to a hydrophobic lipid A terminal unit and forms a major surface component of gram-negative bacteria. The structural features of LPS moieties play a role in pathogenesis and also involve immunogenicity and diagnostic serology. The major toxic factor of LPS resides in the lipid A moiety, anchored in the outer layer of the bacterium, and its relative biological activity is critically related to fine structural features within the molecule. In establishing relationships between structural features and biological activities of LPS it is of the utmost importance to develop new analytical methods that can be applied to the complete unambiguous characterization of a specific LPS molecule. Herein is presented a practical rapid and sensitive analytical procedure for the mass spectral screening of LPS using triethylamine citrate as an agent for both disaggregation and mild hydrolysis of LPS. It provides improved matrix-assisted laser desorption/ionization (MALDI) mass spectra and, in particular, affords the identification of fragments retaining labile substituents present in the native macromolecular LPS structures. The methods were developed and applied using purified LPS of Escherichia coli and Salmonella enterica, as well as more complex LPS of Actnobacillus pleuropneumoniae.

Mix-and-Match System for the Enzymatic Synthesis of Enantiopure Glycerol-3-Phosphate-Containing Capsule Polymer Backbones from Actinobacillus pleuropneumoniae, Neisseria meningitidis, and Bibersteinia trehalosi.

Capsule polymers are crucial virulence factors of pathogenic bacteria and are used as antigens in glycoconjugate vaccine formulations. Some Gram-negative pathogens express poly(glycosylglycerol phosphate) capsule polymers that resemble Gram-positive wall teichoic acids and are synthesized by TagF-like capsule polymerases. So far, the biotechnological use of these enzymes for vaccine developmental studies was restricted by the unavailability of enantiopure CDP-glycerol, one of the donor substrates required for polymer assembly. Here, we use CTP:glycerol-phosphate cytidylyltransferases (GCTs) and TagF-like polymerases to synthesize the poly(glycosylglycerol phosphate) capsule polymer backbones of the porcine pathogen Actinobacillus pleuropneumoniae, serotypes 3 and 7 (App3 and App7). GCT activity was confirmed by high-performance liquid chromatography, and polymers were analyzed using comprehensive nuclear magnetic resonance studies. Solid-phase synthesis protocols were established to allow potential scale-up of polymer production. In addition, one-pot reactions exploiting glycerol-kinase allowed us to start the reaction from inexpensive, widely available substrates. Finally, this study highlights that multidomain TagF-like polymerases can be transformed by mutagenesis of active site residues into single-action transferases, which in turn can act in trans to build-up structurally new polymers. Overall, our protocols provide enantiopure, nature-identical capsule polymer backbones from App2, App3, App7, App9, and App11, Neisseria meningitidis serogroup H, and Bibersteinia trehalosi serotypes T3 and T15. IMPORTANCE Economic synthesis platforms for the production of animal vaccines could help reduce the overuse and misuse of antibiotics in animal husbandry, which contributes greatly to the increase of antibiotic resistance. Here, we describe a highly versatile, easy-to-use mix-and-match toolbox for the generation of glycerol-phosphate-containing capsule polymers that can serve as antigens in glycoconjugate vaccines against Actinobacillus pleuropneumoniae and Bibersteinia trehalosi, two pathogens causing considerable economic loss in the swine, sheep, and cattle industries. We have established scalable protocols for the exploitation of a versatile enzymatic cascade with modular architecture, starting with the preparative-scale production of enantiopure CDP-glycerol, a precursor for a multitude of bacterial surface structures. Thereby, our approach not only allows the synthesis of capsule polymers but might also be exploitable for the (chemo)enzymatic synthesis of other glycerol-phosphate-containing structures such as Gram-positive wall teichoic acids or lipoteichoic acids.

Molecular and functional characterization of HtrA protein in Actinobacillus pleuropneumoniae.

Actinobacillus pleuropneumoniae (A.pleuropneumoniae) causes serious economic loss for the swine industry. A high-temperature requirements A (HtrA)-like protease and its homologs have been reported to be involved in protein quality control and expression of important immunoprotective antigens in many pathogens. In this study, we showed that HtrA of A.pleuropneumoniae exhibited both chaperone and proteolytic activities. Moreover, Outer membrane protein P5 (OmpP5) in A.pleuropneumoniae and Heat shock protein 90 (Hsp90) in porcine lung tissues were first discovered and identified as specific proteolytic substrates for rHtrA. The maximum cleavage activity occurs at 50 ℃ in a time-dependent manner. In addition, rHtrA mainly induced IgG 2a subtype of IgG and Th1 (IFN-γ, IL-2) response in a mice model, and promoted a significant proliferation of spleen lymphocytes compare with negative control (P < 0.05). The survival rates of 37.5 % were observed against A.pleuropneumoniae strain. Together, these data demonstrate that rHtrA plays a multi-functional role in A.pleuropneumoniae.

Development of a non-biased, high-throughput ELISA for the rapid evaluation of immunogenicity and cross-reactivity.

Traditional ELISA-based protein analysis has been predicated on the assumption that proteins bind randomly to the solid surface of the ELISA plate polymer (polystyrene or polyvinyl chloride). Random adherence to the plate ensures equal access to all faces of the protein, an important consideration when evaluating immunogenicity of polyclonal serum samples as well as when examining the cross-reactivity of immune serum against different antigenic variants of a protein. In this study we demonstrate that the soluble form of the surface lipoprotein transferrin binding protein B (TbpB) from three different bacterial pathogens (Neisseria meningitidis, Actinobacillus pleuropneumoniae, and Mannheimia haemolytica) bind the ELISA plate in a manner that consistently obscures the transferrin binding face of the proteins' N-lobe. In order to develop a non-biased ELISA where all faces of the protein are accessible, the strong interaction between biotin and avidin has been exploited by adding a biotin tag to these proteins during Escherichia coli-based cytoplasmic expression and utilizing streptavidin or neutravidin coated ELISA plates for protein capture and display. The use of avidin coated ELISA plates also allows for rapid purification of biotin-tagged proteins from crude E. coli lysates, removing the requirement of prior affinity purification of each protein to be included in the ELISA-based analyses. In proof of concept experiments we demonstrate the utility of this approach for evaluating immunogenicity and cross-reactivity of serum from mice and pigs immunized with TbpBs from human and porcine pathogens.

Structural Basis of Ca2+-Dependent Self-Processing Activity of Repeat-in-Toxin Proteins.

The posttranslational Ca2+-dependent "clip-and-link" activity of large repeat-in-toxin (RTX) proteins starts by Ca2+-dependent structural rearrangement of a highly conserved self-processing module (SPM). Subsequently, an internal aspartate-proline (Asp-Pro) peptide bond at the N-terminal end of SPM breaks, and the liberated C-terminal aspartyl residue can react with a free ε-amino group of an adjacent lysine residue to form a new isopeptide bond. Here, we report a solution structure of the calcium-loaded SPM (Ca-SPM) derived from the FrpC protein of Neisseria meningitidis The Ca-SPM structure defines a unique protein architecture and provides structural insight into the autocatalytic cleavage of the Asp-Pro peptide bond through a "twisted-amide" activation. Furthermore, in-frame deletion of the SPM domain from the ApxIVA protein of Actinobacillus pleuropneumoniae attenuated the virulence of this porcine pathogen in a pig respiratory challenge model. We hypothesize that the Ca2+-dependent clip-and-link activity represents an unconventional strategy for Gram-negative pathogens to adhere to the host target cell surface.IMPORTANCE The Ca2+-dependent clip-and-link activity of large repeat-in-toxin (RTX) proteins is an exceptional posttranslational process in which an internal domain called a self-processing module (SPM) mediates Ca2+-dependent processing of a highly specific aspartate-proline (Asp-Pro) peptide bond and covalent linkage of the released aspartyl to an adjacent lysine residue through an isopeptide bond. Here, we report the solution structures of the Ca2+-loaded SPM (Ca-SPM) defining the mechanism of the autocatalytic cleavage of the Asp414-Pro415 peptide bond of the Neisseria meningitidis FrpC exoprotein. Moreover, deletion of the SPM domain in the ApxIVA protein, the FrpC homolog of Actinobacillus pleuropneumoniae, resulted in attenuation of virulence of the bacterium in a pig infection model, indicating that the Ca2+-dependent clip-and-link activity plays a role in the virulence of Gram-negative pathogens.

[Generation of nalidixic acid-resistant strains and signature-tagged mutants of Actinobacillus pleuropneumoniae].

Actinobacillus pleuropneumoniae is a very important respiratory pathogen for swine and causes great economic losses in pig industry worldwide. Signature-tagged mutagenesis (STM) is an effective method to identify virulence genes in bacteria. In this study, we selected nalidixic acid-resistant strains of APP serotypes 1 and 3 by in vitro cultivation, and used as receipt strains for constructing transposon mutants by mating with E. coli CC 118 lambdapir or S17-1 lambdapir containing mini-Tn10 tag plasmids pLOF/TAG1-48, with or without the help of E. coli DH5alpha (pRK2073). We screened mutant strains by antibiotics selection, PCR and Southern blot identification. Our data revealed that nalidixic acid-resistance of APP strains could easily be induced in vitro and the resistance was due to the mutation in the DNA gyrase A subunit gene gyrA. In the mating experiments, the bi-parental mating was more effective and easier than tri-parental mating. Different APP strains showed a different mating and transposon efficiency in the bi-parental mating, with the strains of serotype 1 much higher than serotype 3 and the reference strain of serotype 3 higher than the field strains. These data were helpful for the construction of STM mutants and pickup of virulence genes of APP.

Cloning and characterization of an Actinobacillus pleuropneumoniae outer membrane protein belonging to the family of PAL lipoproteins.

A 14-kDa outer membrane protein (OMP) was purified from Actinobacillus pleuro-pneumoniae serotype 2. The protein strongly reacts with sera from pigs experimentally or naturally infected with any of the 12 serotypes of A. pleuropneumoniae. The gene encoding this protein was isolated from a gene library of A. pleuropneumoniae serotype 2 reference strain by immunoscreening. Expression of the cloned gene in Escherichia coli revealed that the protein is also located in the outer membrane fraction of the recombinant host. DNA sequence analysis of the gene reveals high similarity of the protein's amino acid sequence to that of the E. coli peptidoglycan-associated lipoprotein PAL, to the Haemophilus influenzae OMP P6 and to related proteins of several other Gram-negative bacteria. We have therefore named the 14-kDa protein PalA, and its corresponding gene, palA. The 20 amino-terminal amino acid residues of PalA constitute a signal sequence characteristic of membrane lipoproteins of prokaryotes with a recognition site for the signal sequence peptidase II and a sorting signal for the final localization of the mature protein in the outer membrane. The DNA sequence upstream of palA contains an open reading frame which is highly similar to the E. coli tolB gene, indicating a gene cluster in A. pleuropneumoniae which is very similar to the E. coli tol locus. The palA gene is conserved and expressed in all A. pleuropneumoniae serotypes and in A. lignieresii. A very similar palA gene is present in A. suis and A. equuli.

Demonstration of the third antigenically distinct outer membrane lipoprotein (OmlA) in Actinobacillus pleuropneumoniae serotype 7.

The gene encoding an outer membrane lipoprotein (OmlA) of Actinobacillus pleuropneumoniae strain WF83 (serotype 7 reference strain), designated omlA7, was sequenced. The amino acid sequence of OmlA7 showed 64.5 and 71.6% identity to that of OmlA from serotypes 1 (OmlA1) and 5 (OmlA5), respectively. The first 134 amino acids of OmlA7 were identical to those of OmlA5. A Southern blot analysis revealed the presence of a gene highly homologous to the omlA7 in the reference strains of serotypes 3, 4, 6, and 7. A Western blot analysis using a specific antiserum against a recombinant OmlA7 detected expression of the homologous proteins in the serotypes 4, 6, and 7 reference strains and a serotype 3 field strain, but not in a serotype 3 reference strain. The data demonstrate the third antigenically distinct OmlA is expressed in A. pleuropneumoniae.

Hemoglobin-binding protein HgbA in the outer membrane of Actinobacillus pleuropneumoniae: homology modelling reveals regions of potential interactions with hemoglobin and heme.

Analyses of the primary sequence of hemoglobin-binding protein HgbA from Actinobacillus pleuropneumoniae by comparative modelling and by a Hidden Markov Model identified its topological similarities to bacterial outer membrane receptors BtuB, FepA, FhuA, and FecA of Escherichia coli. The HgbA model has a globular N-terminal cork domain contained within a 22-stranded beta barrel domain, its folds being similar to the structures of outer membrane receptors that have been solved by X-ray crystallography. The barrel domain of the HgbA model superimposes onto the barrel domains of the four outer membrane receptors with rmsd values less than 1.0 A. This feature is consistent with a phylogenetic tree which indicated clustering of polypeptide sequences for three barrel domains. Furthermore, the HgbA model shares the highest structural similarity to BtuB, with the modelled HgbA barrel having approximately the same elliptical cross-section and height as that of BtuB. Extracellular loop regions of HgbA are predicted to be more extended than those of the E. coli outer membrane receptors, potentially facilitating a protein-protein interface with hemoglobin. Fold recognition modelling of the HgbA loop regions showed that 10 out of 11 predicted loops are highly homologous to known structures of protein loops that contribute to heme/iron or protein-protein interactions. Strikingly, HgbA loop 2 has structural homology to a loop in bovine endothelial nitric acid oxidase that is proximal to a heme-binding site; and HgbA loop 7 contains a histidine residue conserved in a motif that is involved in heme/hemoglobin interactions. These findings implicate HgbA loops 2 and 7 in recognition and binding of hemoglobin or the heme ligand.

Phenotypic variation in the outer membrane protein composition of Actinobacillus (Haemophilus) pleuropneumoniae: non-specific effect of exogenous pyridine nucleotide supply.

Actinobacillus pleuropneumoniae, grown in batch culture, was provided with pyridine nucleotides at concentrations that limited the final growth yield (pyridine nucleotide-deficient cultures) or did not determine the final extent of growth (pyridine nucleotide-sufficient cultures). Sarkosyl-extracted outer membranes from stationary phase, pyridine nucleotide-sufficient organisms contained 23,000 Mr and 43,000 Mr polypeptides that were absent (23,000 Mr) or barely detectable (43,000 Mr) in outer membranes from stationary phase, pyridine nucleotide-deficient organisms or exponential phase organisms. When growth ceased due to exhaustion of pyridine nucleotide, the ratio of the major outer membrane polypeptides (31,000, 38,000 and 69,000 Mr) was altered, becoming more like the ratio found with exponential phase organisms. Similar results were obtained when growth ceased due to glucose exhaustion at low biomass concentrations demonstrating that diverse nutrient deprivations can induce similar changes in outer membrane protein profile. All of these polypeptides were recognized by porcine immune sera indicating their production by A. pleuropneumoniae growing in vivo.

A PCR assay used to study aerosol transmission of Actinobacillus pleuropneumoniae from samples of live pigs under experimental conditions.

The study describes a polymerase chain reaction (PCR) assay for the detection of Actinobacillus pleuropneumoniae. The test is based on the amplification of the omlA gene coding for an outer membrane protein of A. pleuropneumoniae. To test the specificity of the reaction, 19 other bacterial species related to A. pleuropneumoniae or isolated from pigs were assayed. They were all found negative in the PCR assay. The detection threshold of the test was 10(2) A. pleuropneumoniae CFU/assay. The test was then applied to the detection of A. pleuropneumoniae from tonsillar biopsies and tracheobronchial lavage fluids of pigs without a culture step. The detection of A. pleuropneumoniae in these samples was performed by PCR, by conventional culture and by bacteriology with immunomagnetic beads. The number of samples that were found positive by PCR was almost three times higher than the number of samples from which A. pleuropneumoniae was isolated by both bacteriological techniques. The detection of A. pleuropneumoniae in these samples allowed us to demonstrate its aerosol transmission to pigs under experimental conditions. The trial involved 18 specific pathogen free pigs. Six pigs, infected with A. pleuropneumoniae, were located in a unit A, together with four non-infected animals (contact pigs). Eight non-infected pigs (reporter pigs) were located in a unit B, adjacent to A. We detected A. pleuropneumoniae in samples from infected animals but also from 'contact' (unit A) and 'reporter' (unit B) pigs. The results of this study show that the simple preparation of the samples followed by the PCR assay may be a useful tool for epidemiological studies.

An Actinobacillus pleuropneumoniae PCR typing system based on the apx and omlA genes--evaluation of isolates from lungs and tonsils of pigs.

The genetic variability of a gene coding for an outer membrane lipoprotein (omlA) was used to develop a PCR typing system for Actinobacillus pleuropneumoniae. Sequence differences in the middle region of the gene divided the A. pleuropneumoniae serotypes in five distinct groups. Group I included serotypes 1, 9, 11 and 12 (omlA l), Group II consisted of serotypes 2 and 8 (omlA II), Group III included serotypes 3, 6 and 7 (omlA III), Group IV (omlA IV) consisted of serotype 4 and Group V of serotypes 5a, 5b and 10 (omlA V). The sequence differences were utilized to construct PCR primers specific for each group, except of Group IV, as the amplicon of serotype 4 could be separated from Group III by size. Together with a PCR apx typing system, the omlA PCR typing system could discriminate the majority of A. pleuropneumoniae serotypes of biovar 1 except of serotypes 1, 9 and 11 and serotypes 2 and 8. The PCR typing system was tested on 102 field strains of A. pleuropneumoniae isolated from lungs of diseased pigs. The serotyping results of the investigated field strains were in agreement with the apx and omlA gene patterns found in the reference strains of the bacteria, with the exception of the omlA gene of five strains of serotype 8. To examine the apx and omlA gene pattern of tonsil isolates, the PCR typing system was tested on a total of 280 A. pleuropneumoniae field strains isolated from tonsils of pigs. Agreement between serotyping and DNA typing was found in 96% of the isolates using the apx gene patterns and in 89% of the isolates using the omlA gene. The same serotype specific apx/omlA gene pattern was thus found in the majority of the tonsil isolates and in isolates from diseased lungs. Most of the differences in the omlA gene were found in 18 tonsil isolates of serotype 12. The omlA/apx PCR typing system described in the present study makes it possible to determine the type specificity of the majority of A. pleuropneumoniae isolates by simple PCR technique and enables phenotype independent characterization of isolates non-typable by serotyping.

Evaluation of protective efficacy of an Actinobacillus pleuropneumoniae serotype 1 lipopolysaccharide-protein conjugate in mice.

Actinobacillus pleuropneumoniae is the causative agent of porcine pleuropneumonia. The major adhesin of A. pleuropneumoniae has previously been identified as a lipopolysaccharide (LPS), and more recently, we demonstrated that high molecular mass LPS were involved in A. pleuropneumoniae adherence to porcine respiratory tract cells. We postulated that immunization with a LPS-based vaccine may confer a protective immunity. The high molecular mass O-polysaccharides obtained after acid hydrolysis and chromatographic separation were conjugated to bovine serum albumin (BSA) as a protein carrier. Groups of mice were injected twice with the following antigen preparations: whole-cell preparation, outer membrane preparation, O-polysaccharide-BSA conjugate, hydrolyzed LPS and phenol/water extracted LPS. A combination of different adjuvants was also used during these immunization procedures to induce a stronger immunological response to the polysaccharide antigen. Two weeks after the second injection, the mice were challenged intranasally with either homologous A. pleuropneumoniae serotype 1 strain or a serotype 5 strain. The highest survival rate, up to 80%, compared to the control groups (P < 0.05), was recorded when the mice were injected twice with 15 micrograms of carbohydrates of O-polysaccharide-BSA conjugate mixed with the saponin-derived adjuvant Quil A. Survival rates of between 60 and 70%, twice those observed in the control groups immunized with PBS, were recorded in mice injected with the O-polysaccharide-BSA conjugate mixed with other adjuvant preparations such as alhydrogel, peanut oil and Freund's incomplete adjuvant. However, the protection induced by the conjugate antigen preparation was serotype specific, because mice challenged with a serotype 5 strain were killed. Taken together, these results confirm the important role of A. pleuropneumoniae LPS in pathogenesis.

Structural studies of the capsular polysaccharide from Actinobacillus pleuropneumoniae serotype 12.

The capsular polysaccharide of A. pleuropneumoniae is composed of 2-acetamido-2-deoxy-D-glucose (3 parts) and phosphate (1 part). The arrangement of these components in the repeating unit was determined by dephosphorylation, methylation, g.l.c.-m.x., and 1D and 2D n.m.r. spectroscopic methods. The polysaccharide was found to be a high molecular weight polymer of repeating trisaccharide units, joined through phosphate diester linkages, having the structure, (formula: see text).