Ecotoxicity of the Adipate Plasticizers: Influence of the Structure of the Alcohol Substituent.

A significant increase in the production of plastic materials and the expansion of their areas of application contributed to the accumulation of a large amount of waste of polymeric materials. Most of the polymer composition is made up of plasticizers. Phthalate plasticizers have been recognized as potentially hazardous to humans and the environment due to the long period of their biodegradation and the formation of persistent toxic metabolites. It is known that the industrial plasticizer dioctyl adipate is characterized by reduced toxicity and a short biodegradation period. The paper describes the synthesis of a number of new asymmetric esters based on adipic acid and ethoxylated butanol by azeotropic esterification. The receipt of the products was confirmed by IR spectra. The physicochemical properties of the synthesized compounds were investigated. The glass transition temperatures of PVC composites plasticized with alkyl butoxyethyl adipates were determined using DSC analysis. The ecological safety of esters was assessed by the phytotesting method. Samples of adipates were tested for fungal resistance, and the process of their biodegradation in soil was also studied. It is shown that the synthesized esters have good plasticizing properties and are environmentally safe. When utilized under natural conditions, they can serve as a potential source of carbon for soil microorganisms and do not form stable toxic metabolites; therefore, they are not able to accumulate in nature; when the plasticizers under study are disposed of in the soil, toxic substances do not enter.

Efficient Catalysts for the Green Synthesis of Adipic Acid from Biomass.

Green synthesis of adipic acid from renewable biomass is a very attractive goal of sustainable chemistry. Herein, we report efficient catalysts for a two-step transformation of cellulose-derived glucose into adipic acid via glucaric acid. Carbon nanotube-supported platinum nanoparticles are found to work efficiently for the oxidation of glucose to glucaric acid. An activated carbon-supported bifunctional catalyst composed of rhenium oxide and palladium is discovered to be powerful for the removal of four hydroxyl groups in glucaric acid, affording adipic acid with a 99 % yield. Rhenium oxide functions for the deoxygenation but is less efficient for four hydroxyl group removal. The co-presence of palladium not only catalyzes the hydrogenation of olefin intermediates but also synergistically facilitates the deoxygenation. This work presents a green route for adipic acid synthesis and offers a bifunctional-catalysis strategy for efficient deoxygenation.

Organic Salts and Merrifield Resin Supported [PM12O40]3- (M = Mo or W) as Catalysts for Adipic Acid Synthesis.

Adipic acid (AA) was obtained by catalyzed oxidation of cyclohexene, epoxycyclohexane, or cyclohexanediol under organic solvent-free conditions using aqueous hydrogen peroxide (30%) as an oxidizing agent and molybdenum- or tungsten-based Keggin polyoxometalates (POMs) surrounded by organic cations or ionically supported on functionalized Merrifield resins. Operating under these environmentally friendly, greener conditions and with low catalyst loading (0.025% for the molecular salts and 0.001⁻0.007% for the supported POMs), AA could be produced in interesting yields.

Fabrication of pH-Sensitive Tetramycin Releasing Gel and Its Antibacterial Bioactivity against Ralstonia solanacearum.

Ralstonia solanacearum (R. solanacearum)-induced bacterial wilt of the nightshade family causes a great loss in agricultural production annually. Although there has been some efficient pesticides against R. solanacearum, inaccurate pesticide releasing according to the onset time of bacterial wilt during the use of pesticides still hinders the disease management efficiency. Herein, on the basis of the soil pH change during R. solanacearum growth, and pH sensitivity of the Schiff base structure, a pH-sensitive oxidized alginate-based double-crosslinked gel was fabricated as a pesticide carrier. The gel was prepared by crosslinking oxidized sodium alginate (OSA) via adipic dihydrazide (ADH) and Ca2+. After loading tetramycin into the gel, it showed a pH-dependent pesticide releasing behavior and anti-bacterial activity against R. solanacearum. Further study also showed that the inhibition rate of the tetramycin-loaded gel was higher than that of industrial pesticide difenoconazole. This work aimed to reduce the difficulty of pesticide administration in the high incidence period of bacterial wilt and we believe it has a great application potential in nightshade production.

Hydrogen Gas-Mediated Deoxydehydration/Hydrogenation of Sugar Acids: Catalytic Conversion of Glucarates to Adipates.

The development of a system for the operationally simple, scalable conversion of polyhydroxylated biomass into industrially relevant feedstock chemicals is described. This system includes a bimetallic Pd/Re catalyst in combination with hydrogen gas as a terminal reductant and enables the high-yielding reduction of sugar acids. This procedure has been applied to the synthesis of adipate esters, precursors for the production of Nylon-6,6, in excellent yield from biomass-derived sources.

N-Heterocyclic Carbene Catalyzed [3+2] Cycloaddition of Enals with Masked Cinnamates for the Asymmetric One-Pot Synthesis of Adipic Acid Derivatives.

A novel short entry to 3,4-disubstituted adipic acids has been developed by employing an asymmetric NHC-catalyzed [3+2] cycloaddition of enals with masked cinnammates in moderate to good yields and high stereoselectivities. The synthetic utility of the protocol was demonstrated by the basic conversion of the masked cyclopentanone intermediates to 3S,4S-disubstituted adipic acid precursors of pharmaceutically important gababutins.

Synthesis of orthogonally protected (2S)-2-amino-adipic acid (α-AAA) and (2S,4R)-2-amino-4-hydroxyadipic acid (Ahad).

(2S,4R)-2-amino-4-hydroxyadipic acid (Ahad) building block 45 was synthesized in 11 steps and 6.5% overall yield from commercially available materials. Key steps in stereocontrol were an asymmetric conjugate addition employing a proline-based catalyst and a syn-selective intramolecular-conjugate addition of an oxygen nucleophile to an α,ß-unsaturated ester. To enable incorporation of α-amino-adipic acid (α-AAA) and Ahad into peptides, a truly orthogonal protecting group scheme was developed, encompassing an allyloxycarbonyl (Alloc) carbamate for Nα, a tert-butyl ester for the δ-COOH, an acetol ester for the α-COOH, and a tert-butyldimethylsilyl ether for the γ-hydroxy group of Ahad.

Theoretical insights into heme-catalyzed oxidation of cyclohexane to adipic acid.

Adipic acid is a key compound in the chemical industry, where it is mainly used in the production of polymers. The conventional process of its generation requires vast amounts of energy and, moreover, produces environmentally deleterious substances. Thus, there is interest in alternative ways to gain adequate amounts of adipic acid. Experimental reports on a one-pot iron-catalyzed conversion of cyclohexane to adipic acid motivated a theoretical investigation based on density functional theory calculations. The process investigated is interesting because it requires less energy than contemporary methods and does not produce environmentally harmful side products. The aim of the present contribution is to gain insight into the mechanism of the iron-catalyzed cyclohexane conversion to provide a basis for the further development of this process. The rate-limiting step of the process is discussed, but considering the accuracy of the calculations, it is difficult to ensure whether the rate-limiting step is in the substrate oxidation or in the generation of the catalytically active species. It is shown that the slowest step in the substrate oxidation is the conversion of cyclohexanol to cyclohexane-1,2-diol. Hydrogen-atom transfer from one of the OH groups of cyclohexane-1,2-diol makes the intradiol cleavage occur spontaneously.

Magnesium-mediated intramolecular reductive coupling: a stereoselective synthesis of C(2)-symmetric 3,4-bis-silyl-substituted adipic acid derivatives.

Chiral C(2)-symmetric 3,4-bis-silyl-substituted adipic acid derivatives have been synthesised by a Mg/trimethylsilyl chloride-mediated intramolecular reductive coupling of symmetrical disiloxanes of beta-silylacrylic acid N-oxazolidinone derivatives. Efficient and short syntheses of enantiomerically pure enantiomers of 2,6-dioxabicyclo[3.3.0]octane-3,7-dione have been achieved from the bis-silylated adipic acid derivatives using Fleming-Tamao oxidation as the key step.

Zirconia-supported rhenium oxide as an efficient catalyst for the synthesis of biomass-based adipic acid ester.

Synthesis of adipic acid, a key monomer of nylon-66 and polyurethane, from biomass is highly attractive for establishing green and sustainable chemical processes. Here, we report that zirconia-supported rhenium oxide (ReOx/ZrO2) efficiently catalyses the deoxydehydration of cellulose-derived d-glucaric acid, offering adipic acid ester with a yield of 82% by combining with a Pd/C catalyst in subsequent reactions.

Radiochromic film containing poly(hexa-2,4-diynylene adipate) as a radiation dosimeter.

A radiation-sensitive polymer poly(hexa-2,4-diynylene adipate) (PHDA) was synthesized and incorporated into polyvinyl butyral films for radiation dose measurements in the 0.5 - 60 kGy range. PHDA undergoes crosslinking polymerization upon exposure to γ-rays, which changes its color from very pale yellow to deep orange-yellow. The color change is directly related to the absorbed dose. The absorption spectrum of the irradiated films features one absorption band around 500 nm with a shoulder around 465 nm. With increasing absorbed dose, the two bands grow in intensity and move towards higher wavelengths. The dosimeter is nearly insensitive to variations of the humidity in the range of 0-54% and temperature in the range of 30-45 °C during irradiation. The color intensifies after irradiation, both in the dark and in the light at room temperature, which reflects the continuing crosslinking polymerization. However, at - 4 °C, the color intensity does not change with time.

Preparation of New Risperidone Depot Microspheres Based on Novel Biocompatible Poly(Alkylene Adipate) Polyesters as Long-Acting Injectable Formulations.

Risperidone (RIS)-loaded microspheres based on poly(alkylene adipate)s derived from dicarboxylic acids and different aliphatic diols were prepared by the oil in water emulsion and solvent evaporation method. Specifically, 3 polyesters, namely poly(ethylene adipate), poly(propylene adipate), and poly(butylene adipate), were prepared with the aid of a 2-stage melt-polycondensation method and characterized by gel permeation chromatography, proton nuclear magnetic resonance (1H NMR), differential scanning calorimetry, and X-ray diffraction analysis. Results showed that the molecular weight of the polyesters increased as the diol molecular weight increased, while all polymers were of semi-crystalline nature and the melting temperature was varying from 49.1°C to 51.8°C and 65.9°C for poly(propylene adipate), poly(ethylene adipate), and poly(butylene adipate), respectively. The particle size of the RIS-loaded microspheres varied from 10 to 100 µm depending on the polyester type and the drug loading, while X-ray diffraction analysis revealed amorphous active pharmaceutical ingredient in the cases of high drug-loaded microspheres. In vitro drug release studies along with scanning electron microscopy images of microspheres after the completion of dissolution process showed that in all cases RIS release was controlled by the glass transition temperature of polyesters and physical state of active pharmaceutical ingredients via diffusion.

Synthesis and degradation test of hyaluronic acid hydrogels.

Hyaluronic acid (HA) hydrogels prepared with three different crosslinking reagents were assessed by in vitro and in vivo degradation tests for various tissue engineering applications. Adipic acid dihydrazide grafted HA (HA-ADH) was synthesized and used for the preparation of methacrylated HA (HA-MA) with methacrylic anhydride and thiolated HA (HA-SH) with Traut's reagent (imminothiolane). (1)H NMR analysis showed that the degrees of HA-ADH, HA-MA, and HA-SH modification were 69, 29, and 56 mol%, respectively. HA-ADH hydrogel was prepared by the crosslinking with bis(sulfosuccinimidyl) suberate (BS(3)), HA-MA hydrogel with dithiothreitol (DTT) by Michael addition, and HA-SH hydrogel with sodium tetrathionate by disulfide bond formation. According to in vitro degradation tests, HA-SH hydrogel was degraded very fast, compared to HA-ADH and HA-MA hydrogels. HA-ADH hydrogel was degraded slightly faster than HA-MA hydrogel. Based on these results, HA-MA hydrogels and HA-SH hydrogels were implanted in the back of SD rats and their degradation was assessed according to the pre-determined time schedule. As expected from the in vitro degradation test results, HA-SH hydrogel was in vivo degraded completely only in 2 weeks, whereas HA-MA hydrogels were degraded only partially even in 29 days. The degradation rate of HA hydrogels were thought to be controlled by changing the crosslinking reagents and the functional group of HA derivatives. In addition, the state of HA hydrogel was another factor in controlling the degradation rate. Dried HA hydrogel at 37 degrees C for a day resulted in relatively slow degradation compared to the bulk HA hydrogel. There was no adverse effect during the in vivo tests.

Preparation of Protein Conjugates via Homobifunctional Diselenoester Cross-Linker.

Adipic acid diselenoester was developed as an efficient cross-linker for covalent protein conjugation with a variety of small molecular haptens, including mono- and disaccharides, peptide, fluorescence dye, and nicotine. Compared to the counterparts of N-hydroxysuccinimide (NHS) and p-nitrophenyl (PNP) linkers, the diselenoester linker demonstrates improved balance between reactivity and stability and coupling of haptens to proteins under mild conditions with high incorporation efficiency.

Poly(ester-anhydride):poly(beta-amino ester) micro- and nanospheres: DNA encapsulation and cellular transfection.

Poly(ester-anhydride) delivery devices allow flexibility regarding carrier dimensions (micro- versus nanospheres), degradation rate (anhydride versus ester hydrolysis), and surface labeling (through the anhydride functional unit), and were therefore tested for DNA encapsulation and transfection of a macrophage P388D1 cell line. Poly(l-lactic acid-co-sebacic anhydride) and poly(l-lactic acid-co-adipic anhydride) were synthesized through melt condensation, mixed with 25 wt.% poly(beta-amino ester), and formulated with plasmid DNA (encoding firefly luciferase) into micro- and nanospheres using a double emulsion/solvent evaporation technique. The micro- and nanospheres were then characterized (size, morphology, zeta potential, DNA release) and assayed for DNA encapsulation and cellular transfection over a range of poly(ester-anhydride) copolymer ratios. Poly(ester-anhydride):poly(beta-amino ester) composite microspheres (6-12 microm) and nanospheres (449-1031 nm), generated with copolymers containing between 0 and 25% total polyanhydride content, encapsulated plasmid DNA (>or=20% encapsulation efficiency). Within this polyanhydride range, poly(adipic anhydride) copolymers provided DNA encapsulation at an increased anhydride content (10%, microspheres; 10-25%, nanospheres) compared to poly(sebacic anhydride) copolymers (1%, microspheres and nanospheres) with cellular transfection correlating with the observed DNA encapsulation.

Design and synthesis of new potent C2-symmetric HIV-1 protease inhibitors. Use of L-mannaric acid as a peptidomimetic scaffold.

A study on the use of derivatized carbohydrates as C2-symmetric HIV-1 protease inhibitors has been undertaken. L-Mannaric acid (6) was bis-O-benzylated at C-2 and C-5 and subsequently coupled with amino acids and amines to give C2-symmetric products based on C-terminal duplication. Potent HIV protease inhibitors, 28 Ki = 0.4 nM and 43 Ki = 0.2 nM, have been discovered, and two synthetic methodologies have been developed, one whereby these inhibitors can be prepared in just three chemical steps from commercially available materials. A remarkable increase in potency going from IC50 = 5000 nM (23) to IC50 = 15 nM (28) was observed upon exchanging -COOMe for -CONHMe in the inhibitor, resulting in the net addition of one hydrogen bond interaction between each of the two -NH- groups and the HIV protease backbone (Gly 48/148). The X-ray crystal structures of 43 and of 48 have been determined (Figures 5 and 6), revealing the binding mode of these inhibitors which will aid further design.

Urinary 3-hydroxyadipic acid 3,6-lactone: structural identification and effect of fasting in adults and children.

Increased urinary excretion of medium-chain dicarboxylic acids is a general feature of disordered fatty acid metabolism. The physiological role of the metabolic pathways involved in dicarboxylic acid production has been a subject of controversy. In the present investigation, the existence of 3-hydroxyadipic acid 3,6-lactone, possibly representing a metabolic intermediate in the beta-oxidation of adipic acid to succinic acid, has been demonstrated. The identity of this compound was established by electron-impact mass spectrometry of its trimethylsilyl derivative and by comparison with synthetic authentic samples. 3-Hydroxyadipic acid 3,6-lactone is present in almost every urine sample we have examined. In the nonfasting state, urinary concentrations of 0.9 +/- 0.5 micrograms/mg creatinine were observed in the adults. During fasting, the urinary excretion of this compound increased with time. It reached 19.1 +/- 8.5 micrograms/mg creatinine by the end of the third day. The responses in children were even higher; urinary concentrations of 82 +/- 50 micrograms/mg creatinine were observed by the end of 36 hours. The urinary excretion of the lactone is closely correlated (r2 = 0.8) with that of adipic acid, an indicator of fatty acid omega-oxidation activity. Non-ketotic dicarboxylic aciduria appears to vary in different defects based on the ratio of urinary lactone to adipic acid.

Benzene-free synthesis of adipic acid.

Strains of Escherichia coli were constructed and evaluated that synthesized cis,cis-muconic acid from D-glucose under fed-batch fermentor conditions. Chemical hydrogenation of the cis,cis-muconic acid in the resulting fermentation broth has also been examined. Biocatalytic synthesis of adipic acid from glucose eliminates two environmental concerns characteristic of industrial adipic acid manufacture: use of carcinogenic benzene and benzene-derived chemicals as feedstocks and generation of nitrous oxide as a byproduct of a nitric acid catalyzed oxidation. While alternative catalytic syntheses that eliminate the use of nitric acid have been developed, most continue to rely on petroleum-derived benzene as the ultimate feedstock. In this study, E. coli WN1/pWN2.248 was developed that synthesized 36.8 g/L of cis,cis-muconic acid in 22% (mol/mol) yield from glucose after 48 h of culturing under fed-batch fermentor conditions. Optimization of microbial cis,cis-muconic acid synthesis required expression of three enzymes not typically found in E. coli. Two copies of the Klebsiella pneumoniae aroZ gene encoding DHS dehydratase were inserted into the E. coli chromosome, while the K. pneumoniae aroY gene encoding PCA decarboxylase and the Acinetobacter calcoaceticus catA gene encoding catechol 1,2-dioxygenase were expressed from an extrachromosomal plasmid. After fed-batch culturing of WN1/pWN2.248 was complete, the cells were removed from the broth, which was treated with activated charcoal and subsequently filtered to remove soluble protein. Hydrogenation of the resulting solution with 10% Pt on carbon (5% mol/mol) at 3400 kPa of H2 pressure for 2.5 h at ambient temperature afforded a 97% (mol/mol) conversion of cis,cis-muconic acid into adipic acid.

Preparation, characterization, and dissolution kinetics of two novel albuterol salts.

The possibility of producing slowly dissolving albuterol salts was investigated as a potential means of extending the duration of action of the drug following aerosol delivery to the lung. Albuterol adipate and stearate were precipitated from alcoholic solutions of albuterol and adipic or stearic acids, respectively. Differential scanning calorimetry and hot stage microscopy showed that albuterol adipate and stearate produced single melting endotherms at 182 and 116 degrees C, respectively, which were distinct from those of albuterol (158 degrees C), adipic acid (152 degrees C), and stearic acid (70 degrees C). The aqueous solubilities of albuterol free base, sulfate, adipate, and stearate were 15.7, 250, 353, and 0.6 mg . mL-1, respectively, at room temperature. Only the solubilities of the adipate and the stearate increased significantly when the temperature was elevated to 37 degrees C (452.5 and 1.4 mg . mL-1, respectively). With a rotating disk dissolution method, albuterol free base, sulfate, and adipate were found to have intrinsic dissolution rates of 1.1, 20.4, and 24.0 mg . min-1 . cm-2, respectively, in pH 7.4 phosphate buffer at 37 degrees C. Albuterol stearate dissolved much more slowly and in a nonlinear fashion; this was explained by the deposition of a stearate-rich layer on the dissolving surface of the compacted salt.

WA8242A1, A2 and B, novel secretary phospholipase A2 inhibitors produced by Streptomyces violaceusniger. III. Structure elucidation and total synthesis of WA8242B.

The structure of WA8242B, a potent novel inhibitor against phospholipase A2, was fully characterized by spectroscopic methods and chemical degradation. The success of total synthesis of WA8242B confirmed the structure and allowed the pharmacological study of WA8242B. The structures of WA8242A1 and A2 were also described.