Synthesis and Photoluminescent Properties of Eu²âº-Doped BaSiF6 Nanoparticles.

By adjusting the molar ratio of oleic acid (OA), oleylamine (OM), and 1-octadecene (OD) ligands in reaction solution, Eu²âº-doped BaSiF6 nanoparticles were synthesized using a thermal decomposition synthesis route. Eu²âº ions have been successfully doped into BaSiF6 host lattice and strong 4f-4f line emission of the Eu²âº in BaSiF6 matrix is observed. Meanwhile, the photoluminescent (PL) properties of BaSiF6:Eu²âº nanoparticles doping Eu²âº ions at different concentrations were also studied.

Synthesis and characterization of mid-infrared transparency compounds: acentric BaHgS2 and centric Ba8Hg4S5Se7.

Two mid-IR transparency compounds, namely, acentric BaHgS2 (BHS) and centric Ba8Hg4S5Se7 (BHSSe), were successfully synthesized by a conventional solid-state reaction method. The space group of BHS is orthorhombic Pmc21 with [HgS4] tetrahedra and isolated dumbbell-shaped [HgS2] units, while BHSSe belongs to the orthorhombic space group Pnma with infinite isolated ∞[HgSe2(S/Se)2](4-) chains. Raman spectra and thermal analysis of the titled materials were measured. In addition, their band gaps are found to be 1.93 (BHS) and 1.98 eV (BHSSe) from the measured diffuse reflectance spectra. Significantly, the powder BHS sample exhibits a good second harmonic generation (SHG) response of ∼6.5 times compared with that of reference AgGaS2 at a fundamental wavelength (2.09 µm). The calculated SHG coefficients of BHS are also reported, and the maximum result agrees well with the test observation.

The importance of the solids loading on confirming the dielectric nanosize dependence of BaTiO3 powders by slurry method.

The dielectric nanosize dependence of BaTiO3 powders was investigated by the slurry method, where two series of BaTiO3 slurries with 10 vol% and 30 vol% solids loadings were prepared as model samples. Applying the Bruggeman-Hanai equation, the high-frequency limiting permittivity (ε(h)) of the slurries was extracted from the dielectric spectra. The ε(h) of the 10 vol% slurry showed abnormal size independence in the range from 100 nm to 700 nm, and the ε(h) of the 30 vol% slurry exhibited good agreement with the previous prediction. Through analysing quantitatively the response of ε(h) to the changing permittivity of the powders under different solids loading, it was found that the ε h of the slurry with lower solids loading is more inclined to be interfered by the systematic and random errors. Furthermore, a high permittivity value was found in the BaTiO3 powders with 50 nm particle size.

"Green" Flexible Electronics: Biodegradable and Mechanically Strong Soy Protein-Based Nanocomposite Films for Human Motion Monitoring.

Soy protein isolate (SPI) is envisioned as a promising alternative to fabricate "green" flexible electronics, showing great potential in the field of flexible wearable electronics. However, it is challenging to simultaneously achieve conductive film-based human motion-monitoring strain sensors with reliable fatigue resistance, robust mechanical property, environmental degradability, and sensing capability of human motions. Herein, we prepared a series of SPI-based nanocomposite films by embedding a surface-hydroxylated high-dielectric constant inorganic filler, BaTiO3, (HBT) as interspersed nanoparticles into a biodegradable SPI substrate. In particular, the fabricated film comprising 0.5 wt % HBT and glycerin (GL), namely, SPI-HBT0.5-GL0.5, presents multifunctional properties, including a combination of excellent toughness, tensile strength, conductivity, translucence, recyclability, and excellent thermal stability. Meanwhile, this multifunctional film could be simply degraded in phosphate buffered saline solution and does not cause any pollution to the environment. Attractively, wearable sensors prepared with this particular material (SPI-HBT0.5-GL0.5) displayed excellent biocompatibility, prevented the occurrence of an immune response, and could accurately monitor various types of human joint motions and successfully remain operable after 10,000 cycles. These properties make the developed SPI-based film a great candidate in formulating biobased and multifunctional wearable electronics.

Sol-Gel-Based Electrospray Synthesis of Barium Titanate Nanoparticles.

Barium titanate nanoparticles are desirable for a wide range of applications, spanning electronics to biomedicine. Here, we present an electrospray-based method for the synthesis of barium titanate nanomaterials, where their morphology can be altered, forming either particles or rods. As-electrosprayed particles are amorphous and spherical, but upon calcination in the presence of sodium chloride their morphology can vary from particles to rods as the calcination time is increased. The processing-structure-property relationships in these materials are discussed.

Versatile phosphors BaY2Si3O10:RE (RE = Ce3+, Tb3+, Eu3+) for light-emitting diodes.

Rare-earth-activated BaY(2)Si(3)O(10) (BYSO) phosphors were synthesized via a solid-state reaction. BaY(2)Si(3)O(10):Ce(3+) yields an indigo-blue emission peak at 404 nm according to excitation at 334 nm attributed to the Ce(3+) 4f-->5d transition. BaY(2)Si(3)O(10):Tb(3+) typically generates green emission peaks resulting from the 5D4-->7FJ transition. BaY(2)Si(3)O(10):Eu(3+) exhibits red emission peaks upon excitation at 393 nm. The quantum efficiency of these phosphors was found to be 53%, 55%, and 63% of commodity. The results in this work demonstrate that these phosphors with new compositions are good candidate luminescent materials for use in plasma display panels and light-emitting diodes, excited from VUV to UV.

Synthesis and characterization of Ogataea thermomethanolica alcohol oxidase immobilized on barium ferrite magnetic microparticles.

Alcohol oxidase catalyzes the oxidation of primary alcohols into the corresponding aldehydes, making it a potential biocatalyst in the chemical industry. However, the high production cost and poor operational stability of this enzyme are limitations for industrial application. Immobilization of enzyme onto solid supports is a useful strategy for improving enzyme stability. In this work, alcohol oxidase from the thermotolerant methylotrophic yeast Ogataea thermomethanolica (OthAOX) was covalently immobilized onto barium ferrite (BaFe12O19) magnetic microparticles. Among different conditions tested, the highest immobilization efficiency of 71.0 % and catalytic activity of 34.6 U/g was obtained. Immobilization of OthAOX onto magnetic support was shown by Fourier-Transformed infrared microscopy, scanning electron microscopy and X-ray diffraction. The immobilized OthAOX worked optimally at 55 °C and pH 8.0. Immobilization also improved thermostability, in which >65% of the initial immobilized enzyme activity was retained after 24 h pre-incubation at 45 °C. The immobilized enzyme showed a greater catalytic efficiency for oxidation of methanol and ethanol than free enzyme. The immobilized enzyme could be recovered by magnetization and recycled for at least three consecutive batches, after which 70% activity remained. The properties of the immobilized enzyme suggest its potential industrial application for synthesis of aldehyde.

Rapid bioenabled formation of ferroelectric BaTiO3 at room temperature from an aqueous salt solution at near neutral pH.

A 12-mer peptide, identified through phage display biopanning, has been used for the first time to induce the rapid formation of ferroelectric (tetragonal) nanocrystalline BaTiO3 at room temperature from an aqueous salt precursor solution at near neutral pH. BaTiO3 is widely used in capacitors, thermistors, displays, and sensors owing to its attractive dielectric, ferroelectric, pyroelectric, optical, and electrochemical properties. Two 12-mer peptides (BT1 and BT2) were selected from a phage-displayed peptide library via binding to tetragonal BaTiO3 powder. While these peptides possessed various types of amino acids, 8 of the 12 amino acids were common to both peptides. Each of these peptides induced the formation of faceted nanoparticles (50-100 nm diameter) from an aqueous precursor solution. X-ray diffraction and selected area electron diffraction patterns obtained from these faceted nanoparticles were consistent with the BaTiO3 compound. Rietveld analyses of the X-ray diffraction patterns yielded good fits to tetragonal crystal structures, with the BaTiO3 formed in the presence of the BT2 peptide exhibiting the most tetragonal character. A coating of the latter BaTiO3 nanoparticles exhibited polarization hysteresis (a well-known characteristic of ferroelectric materials) at room temperature and a relative permittivity of 2200. Such rapid, peptide-induced precipitation at room temperature provides new opportunities for direct BaTiO3 formation on low-melting or reactive materials (e.g., plastics, cloths, bio-organics) and the low temperature integration of BaTiO3 into electronic devices (e.g., on silicon or flexible polymer substrates).

Room-temperature synthetic pathways to barium titanate nanocrystals.

Novel room-temperature pathways to BaTiO(3) nanocrystals have been recently developed, which stand in contrast to traditional high-temperature methods. Peptide-assisted, bio-facilitated routes have been developed for low-temperature nanocrystal growth, in addition to two low-temperature routes completely independent of biomolecules. These innovative methods lay the groundwork for the facile production of nanoscale BaTiO(3) in economical and energy-efficient ways.

Chemical Synthesis of Porous Barium Titanate Thin Film and Thermal Stabilization of Ferroelectric Phase by Porosity-Induced Strain.

Barium titanate (BaTiO3, hereafter BT) is an established ferroelectric material first discovered in the 1940s and still widely used because of its well-balanced ferroelectricity, piezoelectricity, and dielectric constant. In addition, BT does not contain any toxic elements. Therefore, it is considered to be an eco-friendly material, which has attracted considerable interest as a replacement for lead zirconate titanate (PZT). However, bulk BT loses its ferroelectricity at approximately 130 °C, thus, it cannot be used at high temperatures. Because of the growing demand for high-temperature ferroelectric materials, it is important to enhance the thermal stability of ferroelectricity in BT. In previous studies, strain originating from the lattice mismatch at hetero-interfaces has been used. However, the sample preparation in this approach requires complicated and expensive physical processes, which are undesirable for practical applications. In this study, we propose a chemical synthesis of a porous material as an alternative means of introducing strain. We synthesized a porous BT thin film using a surfactant-assisted sol-gel method, in which self-assembled amphipathic surfactant micelles were used as an organic template. Through a series of studies, we clarified that the introduction of pores had a similar effect on distorting the BT crystal lattice, to that of a hetero-interface, leading to the enhancement and stabilization of ferroelectricity. Owing to its simplicity and cost effectiveness, this fabrication process has considerable advantages over conventional methods.

Comparing the Effects of Chitosan Scaffolds Containing Various Divalent Metal Phosphates on Osteogenic Differentiation of Stem Cells from Human Exfoliated Deciduous Teeth.

Inducing the differentiation of stem cells from human exfoliated deciduous teeth (SHEDs) proceeds with low efficiency, which greatly limits clinical applications. Divalent metal elements play an important role in osteoinductivity for bone remodeling because they can simulate bone formation and decrease bone resorption. The purpose of this study was to investigate the effect of some divalent metal phosphates on osteogenic differentiation from human exfoliated deciduous teeth. These divalent metal ions can be gradually released from the scaffold into the culture medium and continually induce osteoblastic differentiation. Experimental results revealed that SHEDs cultured in chitosan scaffolds containing divalent metal phosphates had notably increased osteoblastic differentiation compared with cells cultured without divalent metal phosphates. This effect was due to the high activity of alkaline phosphatase, as well as the bone-related gene expression of collagen type I, Runx2, osteopontin, osteocalcin, VEGF, and Ang-1, shown through RT-PCR and bone-related protein immunocytochemistry stains. A calcium-content assay further revealed significant enhancement of deposited minerals on the scaffolds after 21 days of culture, particularly for magnesium phosphate and zinc phosphate. Thus, divalent metals, except for barium phosphate, effectively promoted SHED cell differentiation and osteoblastic cell maturation. This study demonstrated that the divalent metal elements magnesium, strontium, and zinc could effectively induce SHED osteoblastic differentiation for use in tissue engineering and bone repair.

Size-manipulable synthesis of single-crystalline BaMnO3 and BaTi1/2Mn1/2O3 nanorods/nanowires.

We report a size-manipulable synthesis of single-crystalline nanorods/nanowires of barium manganite (BaMnO(3)) and barium titanium manganite (BaTi(1/2)Mn(1/2)O(3)) by using the composite-hydroxide-mediated approach. The synthesis cleanly yields nanorods with a hexagonal perovskite structure. Typical nanorods have widths ranging between 50 and 100 nm, and the lengths can be easily controlled by time and temperature or by adding a small amount of water during the synthesis process. Resistance measurement shows that a phase transition happened at 58 K on BaMnO(3). The photoluminescence spectrum of BaTi(1/2)Mn(1/2)O(3) presents two emission peaks at wavelengths of 465 and 593 nm, corresponding to blue and green fluorescence. The ability to synthesize nanorod manganites of a desired length should enable detailed investigations of the size-dependent evolution of magnetism, magnetoresistance, nanoscale phase separation, and realization of a nanodevice of magnetic sensors.

Synthesis of new visible light active photocatalysts of Ba(In(1/3)Pb(1/3)M'(1/3))O3 (M' = Nb, Ta): a band gap engineering strategy based on electronegativity of a metal component.

We have synthesized new, efficient, visible light active photocatalysts through the incorporation of highly electronegative non-transition metal Pb or Sn ions into the perovskite lattice of Ba(In(1/3)Pb(1/3)M'(1/3))O3 (M = Sn, Pb; M' = Nb, Ta). X-ray diffraction, X-ray absorption spectroscopic, and energy dispersive spectroscopic microprobe analyses reveal that tetravalent Pb or Sn ions exist in the B-site of the perovskite lattice, along with In and Nb/Ta ions. According to diffuse UV-vis spectroscopic analysis, the Pb-containing quaternary metal oxides Ba(In(1/3)Pb(1/3)M'(1/3))O3 possess a much narrower band gap (E(g) approximately 1.48-1.50 eV) when compared to the ternary oxides Ba(In(1/2)M'(1/2))O3 (E(g) approximately 2.97-3.30 eV) and the Sn-containing Ba(In(1/3)Sn(1/3)M'(1/3))O3 derivatives (E(g) approximately 2.85-3.00 eV). Such a variation of band gap energy upon the substitution is attributable to the broadening of the conduction band caused by the dissimilar electronegativities of the B-site cations. In contrast to the ternary or the Sn-substituted quaternary compounds showing photocatalytic activity under UV-vis irradiation, the Ba(In(1/3)Pb(1/3)M'(1/3))O3 compounds induce an efficient photodegradation of 4-chlorophenol under visible light irradiation (lambda > 420 nm). The present results highlight that the substitution of electronegative non-transition metal cations can provide a very powerful way of developing efficient visible light harvesting photocatalysts through tuning of the band structure of a semiconductive metal oxide.

High calcination of ferroelectric BaTiO3 doped Fe nanoceramics prepared by a solid-state sintering method.

This study examined the effects of the combination of starting materials on the properties of solid-state reacted BaTiO3 using two different types of BaCO3 and TiO2. In addition, the effect of mechanochemical activation by high energy milling and the Ba/Ti molar ratio on the reaction temperature, particle size and tetragonality were investigated. The TiO2 phase and size plays a major role in increasing the reaction temperature and particle size. With the optimum selection of starting materials and processing conditions, BaTiO3 with a particle size <200 nm (Scherrer's formula) and a tetragonality c/a of approximately 1.007 was obtained. Broadband dielectric spectroscopy is applied to investigate the electrical properties of disordered perovskite-like ceramics in a wide temperature range. From the X-ray diffraction analysis it was found that the newly obtained BaTi0.5Fe0.5O3 ceramics consist of two chemically different phases. The electric modulus M∗ formalism used in the analysis enabled us to distinguish and separate the relaxation processes, dominated by marked conductivity in the ε∗(ω) representation. Interfacial effects on the dielectric properties of the samples have been understood by Cole-Cole plots in complex impedance and modulus formalism. Modulus formalism has identified the effects of both grain and grain boundary microstructure on the dielectric properties, particularly in solid state routed samples.

The origin of the low-spin character of the resting state of cytochrome P450cam investigated by means of active site analogues.

Crown-capped iron(S-) porphyrins 1 x H2O and 2 x H2O and their corresponding Ba2+ complexes have been prepared as active site analogues of the resting state of cytochrome P450cam. cw-EPR studies and electronic structure calculations at the density functional theory (DFT) level of model systems suggest a functional role of the water cluster of P450cam.

Cytotoxicity of synthetic barium hydroxyapatite.

Barium hydroxyapatite (Ba10(PO4)6(OH)2, Ba-HAp) was synthesized by a wet method using Ba(OH)2.8H2O and (NH4)2HPO4 as starting materials. The Ba-HAp obtained had a Ba/P atomic ratio of 1.76 and contained CO3 groups. The Ba-HAp was sintered at 1073 K for 12 hours. The sintered Ba-HAp had a three point bending strength of 29 MPa and Young's modulus of 27 GPa. Cytotoxicity of the sintered bodies and particles was tested using L-cells. The sintered Ba-HAp showed no cytotoxicity, and the cells were closely in contact with the surfaces of sintered Ba-HAp. Morphological observation of the cell around the Ba-HAp particles also showed no cytotoxicity. However, cell growth was inhibited by Ca adsorption on the Ba-HAp particles. These results suggested that the Ba-HAp had no cytotoxicity and can be applied as a bioactive X-ray opaque material.

The application of fluorinated aromatic dimethacrylates to experimental light-cured radiopaque composite resin, containing barium-borosilicate glass filler--a progress in nonwaterdegradable properties.

This study investigated the durability, especially the nonwaterdegradable qualities, of experimental light-cured composite resin containing barium-borosilicate glass filler. For this purpose, Bis-GMA, a typical component of base monomer in conventional composite resin, was replaced by Bis-GMA-F which is water-repellent. After over 20,000 thermal cycles, the composite resin containing Bis-GMA retained only 60 approximately 70% of its initial compressive, diametral tensile, flexural strength and flexural elastic modulus. However, the experimental composite resin containing Bis-GMA-F as a resin matrix showed no loss of compressive, diametral tensile strength or flexural elastic modulus, although flexural strength showed some deterioration. It was considered that the difference between Bis-GMA-F and Bis-GMA, as resin matrix, caused variation in the characteristics of water sorption.

Synthesis, growth and characterisations of semi-organic nonlinear optical crystal glycine barium nitrate (GBN).

Transparent crystal of glycine barium nitrate (GBN) has been grown from aqueous solution by slow evaporation technique at room temperature. Powder XRD study reveals the crystalline nature of the grown sample. Single crystal XRD study shows that the GBN belongs to orthorhombic crystal system. FTIR spectral study confirms the presence of the functional groups in the grown crystal. The presence of wide transparency window in the UV-visible region makes GBN crystal suitable for opto-electronic device applications. The grown sample has SHG efficiency is 0.8 times that of standard KDP crystal. Dielectric studies reveal that both dielectric constant and dielectric loss decreases with increase in frequency. Photoconductivity study confirms the negative photoconducting nature of the crystal.

Evaluation of antibacterial properties of Barium Zirconate Titanate (BZT) nanoparticle.

So far, the antibacterial activity of some organic and inorganic compounds has been studied. Barium zirconate titanate [Ba(ZrxTi1-x)O3] (x = 0.05) nanoparticle is an example of inorganic materials. In vitro studies have provided evidence for the antibacterial activity of this nanoparticle. In the current study, the nano-powder was synthesized by sol-gel method. X-ray diffraction showed that the powder was single-phase and had a perovskite structure at the calcination temperature of 1000 °C. Antibacterial activity of the desired nanoparticle was assessed on two gram-positive (Staphylococcus aureus PTCC1431 and Micrococcus luteus PTCC1625) and two gram-negative (Escherichia coli HP101BA 7601c and clinically isolated Klebsiella pneumoniae) bacteria according to Radial Diffusion Assay (RDA). The results showed that the antibacterial activity of BZT nano-powder on both gram-positive and gram-negative bacteria was acceptable. The minimum inhibitory concentration of this nano-powder was determined. The results showed that MIC values for E. coli, K. pneumoniae, M. luteus and S. aureus were about 2.3 µg/mL, 7.3 µg/mL, 3 µg/mL and 12 µg/mL, respectively. Minimum bactericidal concentration (MBC) was also evaluated and showed that the growth of E. coli, K. pneumoniae, M. luteus and S. aureus could be decreased at 2.3, 14, 3 and 18 µg/mL of BZT. Average log reduction in viable bacteria count in time-kill assay ranged between 6 Log10 cfu/mL to zero after 24 h of incubation with BZT nanoparticle.

Solar photocatalytic degradation of RB5 by ferrite bismuth nanoparticles synthesized via ultrasound.

In this paper, the photocatalytic degradation of Reactive Black 5 (RB5) was investigated with ferrite bismuth synthesized via ultrasound under direct sunlight irradiation. The intensity of absorption peaks of RB5 gradually decreased by increasing the irradiation time and finally vanished in 50 min in acidic medium. The formation of new intermediate was observed in basic medium. The relative concentration of RB5 in solution and on the surface of ferrite bismuth (BiFeO3) nanoparticles was considered during the experiment in acidic and basic media. The effects of various parameters such as amount of catalyst, concentration of dye, and pH of the solution have been studied on the dye degradation. The adsorption isotherm and the kinetic of photocatalytic degradation of RB5 were investigated. The adsorption constants in the dark and in the presence of sunlight irradiation were compared. The photocatalytic degradation mechanism of RB5 has been evaluated through the addition of some scavengers to the solution. In addition, the stability and reusability of the catalyst were examined in this work.