S-glutathionylation of cryptic cysteines enhances titin elasticity by blocking protein folding.

The giant elastic protein titin is a determinant factor in how much blood fills the left ventricle during diastole and thus in the etiology of heart disease. Titin has been identified as a target of S-glutathionylation, an end product of the nitric-oxide-signaling cascade that increases cardiac muscle elasticity. However, it is unknown how S-glutathionylation may regulate the elasticity of titin and cardiac tissue. Here, we show that mechanical unfolding of titin immunoglobulin (Ig) domains exposes buried cysteine residues, which then can be S-glutathionylated. S-glutathionylation of cryptic cysteines greatly decreases the mechanical stability of the parent Ig domain as well as its ability to fold. Both effects favor a more extensible state of titin. Furthermore, we demonstrate that S-glutathionylation of cryptic cysteines in titin mediates mechanochemical modulation of the elasticity of human cardiomyocytes. We propose that posttranslational modification of cryptic residues is a general mechanism to regulate tissue elasticity.

Cartilage-like protein hydrogels engineered via entanglement.

Load-bearing tissues, such as muscle and cartilage, exhibit high elasticity, high toughness and fast recovery, but have different stiffness (with cartilage being significantly stiffer than muscle)1-8. Muscle achieves its toughness through finely controlled forced domain unfolding-refolding in the muscle protein titin, whereas articular cartilage achieves its high stiffness and toughness through an entangled network comprising collagen and proteoglycans. Advancements in protein mechanics and engineering have made it possible to engineer titin-mimetic elastomeric proteins and soft protein biomaterials thereof to mimic the passive elasticity of muscle9-11. However, it is more challenging to engineer highly stiff and tough protein biomaterials to mimic stiff tissues such as cartilage, or develop stiff synthetic matrices for cartilage stem and progenitor cell differentiation12. Here we report the use of chain entanglements to significantly stiffen protein-based hydrogels without compromising their toughness. By introducing chain entanglements13 into the hydrogel network made of folded elastomeric proteins, we are able to engineer highly stiff and tough protein hydrogels, which seamlessly combine mutually incompatible mechanical properties, including high stiffness, high toughness, fast recovery and ultrahigh compressive strength, effectively converting soft protein biomaterials into stiff and tough materials exhibiting mechanical properties close to those of cartilage. Our study provides a general route towards engineering protein-based, stiff and tough biomaterials, which will find applications in biomedical engineering, such as osteochondral defect repair, and material sciences and engineering.

Structure of the native myosin filament in the relaxed cardiac sarcomere.

The thick filament is a key component of sarcomeres, the basic units of striated muscle1. Alterations in thick filament proteins are associated with familial hypertrophic cardiomyopathy and other heart and muscle diseases2. Despite the central importance of the thick filament, its molecular organization remains unclear. Here we present the molecular architecture of native cardiac sarcomeres in the relaxed state, determined by cryo-electron tomography. Our reconstruction of the thick filament reveals the three-dimensional organization of myosin, titin and myosin-binding protein C (MyBP-C). The arrangement of myosin molecules is dependent on their position along the filament, suggesting specialized capacities in terms of strain susceptibility and force generation. Three pairs of titin-α and titin-ß chains run axially along the filament, intertwining with myosin tails and probably orchestrating the length-dependent activation of the sarcomere. Notably, whereas the three titin-α chains run along the entire length of the thick filament, titin-ß chains do not. The structure also demonstrates that MyBP-C bridges thin and thick filaments, with its carboxy-terminal region binding to the myosin tails and directly stabilizing the OFF state of the myosin heads in an unforeseen manner. These results provide a foundation for future research investigating muscle disorders involving sarcomeric components.

Cryo-EM structure of the human cardiac myosin filament.

Pumping of the heart is powered by filaments of the motor protein myosin that pull on actin filaments to generate cardiac contraction. In addition to myosin, the filaments contain cardiac myosin-binding protein C (cMyBP-C), which modulates contractility in response to physiological stimuli, and titin, which functions as a scaffold for filament assembly1. Myosin, cMyBP-C and titin are all subject to mutation, which can lead to heart failure. Despite the central importance of cardiac myosin filaments to life, their molecular structure has remained a mystery for 60 years2. Here we solve the structure of the main (cMyBP-C-containing) region of the human cardiac filament using cryo-electron microscopy. The reconstruction reveals the architecture of titin and cMyBP-C and shows how myosin's motor domains (heads) form three different types of motif (providing functional flexibility), which interact with each other and with titin and cMyBP-C to dictate filament architecture and function. The packing of myosin tails in the filament backbone is also resolved. The structure suggests how cMyBP-C helps to generate the cardiac super-relaxed state3; how titin and cMyBP-C may contribute to length-dependent activation4; and how mutations in myosin and cMyBP-C might disturb interactions, causing disease5,6. The reconstruction resolves past uncertainties and integrates previous data on cardiac muscle structure and function. It provides a new paradigm for interpreting structural, physiological and clinical observations, and for the design of potential therapeutic drugs.

[The Structural Features of Skeletal Muscle Titin Aggregates].

Titin is a multidomain protein of striated and smooth muscles of vertebrates. The protein consists of repeating immunoglobulin-like (Ig) and fibronectin-like (FnIII) domains, which are ß-sandwiches with a predominant ß-structure, and also contains disordered regions. In this work, the methods of atomic force microscopy (AFM), X-ray diffraction, and Fourier transform infrared spectroscopy were used to study the morphology and structure of aggregates of rabbit skeletal muscle titin obtained in two different solutions: 0.15 M glycine-KOH, pH 7.0 and 200 mM KCl, 10 mM imidazole, pH 7.0. According to AFM data, skeletal muscle titin formed amorphous aggregates of different morphologies in the above two solutions. Amorphous aggregates of titin formed in a solution containing glycine consisted of much larger particles than aggregates of this protein formed in a solution containing KCl. The "KCl-aggregates" according to AFM data had the form of a "sponge"-like structure, while amorphous "glycine-aggregates" of titin formed "branching" structures. Spectrofluorometry revealed the ability of "glycine-aggregates" of titin to bind to the dye thioflavin T (TT), and X-ray diffraction revealed the presence of one of the elements of the amyloid cross ß-structure, a reflection of ~4.6 Å, in these aggregates. These data indicate that "glycine-aggregates" of titin are amyloid or amyloid-like. No similar structural features were found in "KCl-aggregates" of titin; they also did not show the ability to bind to thioflavin T, indicating the non-amyloid nature of these titin aggregates. Fourier transform infrared spectroscopy revealed differences in the secondary structure of the two types of titin aggregates. The data we obtained demonstrate the features of structural changes during the formation of intermolecular bonds between molecules of the giant titin protein during its aggregation. The data expand the understanding of the process of amyloid protein aggregation.

Investigation of Structural Peculiarities of Smooth Muscle Titin Aggregates, Formed under Different In Vitro Conditions, by Small-Angle X-Ray Scattering and Fourier Transform Infrared Spectroscopy.

Small-angle X-ray scattering (SAXS) and Fourier transform infrared (FTIR) spectroscopy were used to investigate structural peculiarities of two types of amyloid aggregates of smooth muscle titin, which differed in their morphology and ability to disaggregate, and differently bound thioflavin T dye. SAXS showed that the structure/shape of the two titin aggregate types was close to a flat shape. FTIR spectroscopy revealed no differences in the secondary structure of the two types. These data suggest that both types of "flat-shape" titin aggregates are identical in their secondary structure and, as shown previously, have a quaternary cross-ß structure. An assumption was made that the most stable supramolecular complexes of a cross-ß structure, which do not differ in their secondary structure, formed first during the aggregation of smooth muscle titin. Then, depending on ambient conditions, these supramolecular structures could form titin aggregates of different morphology and properties.

The Complex and Diverse Genetic Architecture of Dilated Cardiomyopathy.

Our insight into the diverse and complex nature of dilated cardiomyopathy (DCM) genetic architecture continues to evolve rapidly. The foundations of DCM genetics rest on marked locus and allelic heterogeneity. While DCM exhibits a Mendelian, monogenic architecture in some families, preliminary data from our studies and others suggests that at least 20% to 30% of DCM may have an oligogenic basis, meaning that multiple rare variants from different, unlinked loci, determine the DCM phenotype. It is also likely that low-frequency and common genetic variation contribute to DCM complexity, but neither has been examined within a rare variant context. Other types of genetic variation are also likely relevant for DCM, along with gene-by-environment interaction, now established for alcohol- and chemotherapy-related DCM. Collectively, this suggests that the genetic architecture of DCM is broader in scope and more complex than previously understood. All of this elevates the impact of DCM genetics research, as greater insight into the causes of DCM can lead to interventions to mitigate or even prevent it and thus avoid the morbid and mortal scourge of human heart failure.

Identification of the domains within the N2A region of titin that regulate binding to actin.

Titin, the largest muscle protein, plays an important role in passive tension, sarcomeric integrity and cell signaling within the muscle. Recent work has also highlighted a role for titin in active muscle and the N2A region found in skeletal muscle titin and in some isoforms of cardiac titin has been linked to this function. The N2A region is a multi-domain region composed of four immunoglobulin domains (I80-I83) and a disordered region called the insertion sequence. Previously, our lab has shown that the N2A region binds F-actin in a calcium dependent manner, but it is not known which domains within this region are critical for this binding to occur. In this work, we have used co-sedimentation to demonstrate that only constructs containing the I80 domain are capable of binding F-actin. In addition, binding was only observed in constructs containing at least 3 immunoglobulin domains suggesting a length-dependence to binding. Finally, the calcium-dependence of N2A binding is lost when I83 is not present, consistent with the calcium stabilization that has been reported for this domain. Based on these results, we propose that I80 is critical for initiating binding to F-actin and that I83 is responsible for the calcium dependence.

Interdomain Linker Effect on the Mechanical Stability of Ig Domains in Titin.

Titin is the largest protein in humans, composed of more than one hundred immunoglobulin (Ig) domains, and plays a critical role in muscle's passive elasticity. Thus, the molecular design of this giant polyprotein is responsible for its mechanical function. Interestingly, most of these Ig domains are connected directly with very few interdomain residues/linker, which suggests such a design is necessary for its mechanical stability. To understand this design, we chose six representative Ig domains in titin and added nine glycine residues (9G) as an artificial interdomain linker between these Ig domains. We measured their mechanical stabilities using atomic force microscopy-based single-molecule force spectroscopy (AFM-SMFS) and compared them to the natural sequence. The AFM results showed that the linker affected the mechanical stability of Ig domains. The linker mostly reduces its mechanical stability to a moderate extent, but the opposite situation can happen. Thus, this effect is very complex and may depend on each particular domain's property.

Changes in Muscle Shear Modulus and Urinary Titin N-Terminal Fragment after Eccentric Exercise.

This study aimed to investigate the relationship between the muscle shear modulus of the biceps brachii, urinary titin N-terminal fragment (UTF), and other damage markers after eccentric exercise. Seventeen healthy males performed five sets of ten eccentric exercises with dumbbells weighing 50% of the maximum voluntary contraction (MVC) at the elbow joint. Muscle shear modulus with range of interest set to only biceps brachii muscle measured by ultrasound shear wave elastography, UTF, MVC, range of motion (ROM), and soreness (SOR) were recorded before, immediately after, and 1, 24, 48, 72, 96, and 168 h after eccentric exercise. Each marker changed in a time course pattern, as found in previous studies. The peak shear modulus showed a moderate negative correlation with peak MVC (r = -0.531, P < 0.05) and a strong positive correlation with peak UTF (r = 0.707, P < 0.01). Our study results revealed a significant relationship between muscle strength, shear modulus measured by ultrasound SWE, and titin measured by UTF, as a non-invasive damage marker after eccentric exercise to track changes in EIMD.

Interdomain linkers tailor the stability of immunoglobulin repeats in polyproteins.

Linkers in polyproteins are considered as mere spacers between two adjacent domains. However, a series of studies using single-molecule force spectroscopy have recently reported distinct thermodynamic stability of I27 in polyproteins with varying linkers and indicated the vital role of linkers in domain stability. A flexible glycine rich linker (-(GGG)n, n ≥ 3) featured unfolding at lower forces than the regularly used arg-ser (RS) based linker. Interdomain interactions among I27 domains in Gly-rich linkers were suggested to lead to reduced domain stability. However, the negative impact of inter domain interactions on domain stability is thermodynamically counter-intuitive and demanded thorough investigations. Here, using an array of ensemble equilibrium experiments and in-silico measurements with I27 singlet and doublets with two aforementioned linkers, we delineate that the inter-domain interactions in fact raise the stability of the polyprotein with RS linker. More surprisingly, a highly flexible Gly-rich linker has no interference on the stability of polyprotein. Overall, we conclude that flexible linkers are preferred in a polyprotein for maintaining domain's independence.

The nano-scale viscoelasticity using atomic force microscopy in liquid environment.

We measured viscoelasticity of two nanoscale systems, single protein molecules and molecular layers of water confined between solid walls. In order to quantify the viscoelastic response of these nanoscale systems in liquid environment, the measurements are performed using two types of atomic force microscopes (AFMs), which employ different detection schemes to measure the cantilever response. We used a deflection detection scheme, available in commercial AFMs, that measures cantilever bending and a fibre-interferometer based detection which measures cantilever displacement. The hydrodynamics of the cantilever is modelled using Euler-Bernoulli equation with appropriate boundary conditions which accommodate both detection schemes. In a direct contradiction with many reports in the literature, the dissipation coefficient of a single octomer of titin I278 is found to be immeasurably low. The upper bound on the dissipation coefficient is 5 × 10-7 kg s-1, which is much lower than the reported values. The entropic stiffness of single unfolded domains of protein measured using both methods is in the range of 10 mN m-1. We show that in a conventional deflection detection measurement, the phase of the bending signal can be a primary source of artefacts in the dissipation estimates. It is recognized that the measurement of cantilever displacement, which has negligibly small phase lag due to hydrodynamics of the cantilever at low excitation frequencies, is better suited for ensuring artefact-free measurement of viscoelasticity compared to the measurement of the cantilever bending. Further, it was possible to measure dissipation in molecular layers of water confined between the tip and the substrate using fibre interferometer based AFM with similar experimental parameters. It confirms that the dissipation coefficient of a single I278 is below the detection limit of AFM. The results shed light on the discrepancy observed in the measured diffusional dynamics of protein collapse measured using Force spectroscopic techniques and single-molecule optical techniques.

Folding pathway of an Ig domain is conserved on and off the ribosome.

Proteins that fold cotranslationally may do so in a restricted configurational space, due to the volume occupied by the ribosome. How does this environment, coupled with the close proximity of the ribosome, affect the folding pathway of a protein? Previous studies have shown that the cotranslational folding process for many proteins, including small, single domains, is directly affected by the ribosome. Here, we investigate the cotranslational folding of an all-ß Ig domain, titin I27. Using an arrest peptide-based assay and structural studies by cryo-EM, we show that I27 folds in the mouth of the ribosome exit tunnel. Simulations that use a kinetic model for the force dependence of escape from arrest accurately predict the fraction of folded protein as a function of length. We used these simulations to probe the folding pathway on and off the ribosome. Our simulations-which also reproduce experiments on mutant forms of I27-show that I27 folds, while still sequestered in the mouth of the ribosome exit tunnel, by essentially the same pathway as free I27, with only subtle shifts of critical contacts from the C to the N terminus.

Conformational entropy of a single peptide controlled under force governs protease recognition and catalysis.

An immense repertoire of protein chemical modifications catalyzed by enzymes is available as proteomics data. Quantifying the impact of the conformational dynamics of the modified peptide remains challenging to understand the decisive kinetics and amino acid sequence specificity of these enzymatic reactions in vivo, because the target peptide must be disordered to accommodate the specific enzyme-binding site. Here, we were able to control the conformation of a single-molecule peptide chain by applying mechanical force to activate and monitor its specific cleavage by a model protease. We found that the conformational entropy impacts the reaction in two distinct ways. First, the flexibility and accessibility of the substrate peptide greatly increase upon mechanical unfolding. Second, the conformational sampling of the disordered peptide drives the specific recognition, revealing force-dependent reaction kinetics. These results support a mechanism of peptide recognition based on conformational selection from an ensemble that we were able to quantify with a torsional free-energy model. Our approach can be used to predict how entropy affects site-specific modifications of proteins and prompts conformational and mechanical selectivity.

Increased Expression of N2BA Titin Corresponds to More Compliant Myofibrils in Athlete's Heart.

Long-term exercise induces physiological cardiac adaptation, a condition referred to as athlete's heart. Exercise tolerance is known to be associated with decreased cardiac passive stiffness. Passive stiffness of the heart muscle is determined by the giant elastic protein titin. The adult cardiac muscle contains two titin isoforms: the more compliant N2BA and the stiffer N2B. Titin-based passive stiffness may be controlled by altering the expression of the different isoforms or via post-translational modifications such as phosphorylation. Currently, there is very limited knowledge about titin's role in cardiac adaptation during long-term exercise. Our aim was to determine the N2BA/N2B ratio and post-translational phosphorylation of titin in the left ventricle and to correlate the changes with the structure and transverse stiffness of cardiac sarcomeres in a rat model of an athlete's heart. The athlete's heart was induced by a 12-week-long swim-based training. In the exercised myocardium the N2BA/N2B ratio was significantly increased, Ser11878 of the PEVK domain was hypophosphorlyated, and the sarcomeric transverse elastic modulus was reduced. Thus, the reduced passive stiffness in the athlete's heart is likely caused by a shift towards the expression of the longer cardiac titin isoform and a phosphorylation-induced softening of the PEVK domain which is manifested in a mechanical rearrangement locally, within the cardiac sarcomere.

Amyloid Aggregates of Smooth-Muscle Titin Impair Cell Adhesion.

Various amyloid aggregates, in particular, aggregates of amyloid ß-proteins, demonstrate in vitro and in vivo cytotoxic effects associated with impairment of cell adhesion. We investigated the effect of amyloid aggregates of smooth-muscle titin on smooth-muscle-cell cultures. The aggregates were shown to impair cell adhesion, which was accompanied by disorganization of the actin cytoskeleton, formation of filopodia, lamellipodia, and stress fibers. Cells died after a 72-h contact with the amyloid aggregates. To understand the causes of impairment, we studied the effect of the microtopology of a titin-amyloid-aggregate-coated surface on fibroblast adhesion by atomic force microscopy. The calculated surface roughness values varied from 2.7 to 4.9 nm, which can be a cause of highly antiadhesive properties of this surface. As all amyloids have the similar structure and properties, it is quite likely that the antiadhesive effect is also intrinsic to amyloid aggregates of other proteins. These results are important for understanding the mechanisms of the negative effect of amyloids on cell adhesion.

Prediction of the initial folding sites and the entire folding processes for Ig-like beta-sandwich proteins.

Describing the whole story of protein folding is currently the main enigmatic problem in molecular bioinformatics study. Protein folding mechanisms have been intensively investigated with experimental as well as simulation techniques. Since a protein folds into its specific 3D structure from a unique amino acid sequence, it is interesting to extract as much information as possible from the amino acid sequence of a protein. Analyses based on inter-residue average distance statistics and a coarse-grained Go-model simulation were conducted on Ig and FN3 domains of a titin protein to decode the folding mechanisms from their sequence data and native structure data, respectively. The central region of all domains was predicted to be an initial folding unit, that is, stable in an early state of folding. This common feature coincides well with the experimental results and underscores the significance of the ß-sandwich proteins' common structure, namely, the key strands for folding and the Greek-key motif, which is located in the central region. We confirmed that our sequence-based techniques were able to predict the initial folding event just next to the denatured state and that a 3D-based Go-model simulation can be used to investigate the whole process of protein folding.

Rate-dependent force-extension models for single-molecule force spectroscopy experiments.

Single-molecule force spectroscopy techniques allow for the measurement of several static and dynamic features of macromolecules of biological origin. In particular, atomic force microscopy, used with a variable pulling rate, provides valuable information on the folding/unfolding dynamics of proteins. We propose here two different models able to describe the out-of-equilibrium statistical mechanics of a chain composed of bistable units. These latter represent the protein domains, which can be either folded or unfolded. Both models are based on the Langevin approach and their implementation allows for investigating the effect of the pulling rate and of the device intrinsic elasticity on the chain unfolding response. The theoretical results (both analytical and numerical) have been compared with experimental data concerning the unfolding of the titin and filamin proteins, eventually obtaining a good agreement over a large range of the pulling rates.

α-Actinin/titin interaction: A dynamic and mechanically stable cluster of bonds in the muscle Z-disk.

Stable anchoring of titin within the muscle Z-disk is essential for preserving muscle integrity during passive stretching. One of the main candidates for anchoring titin in the Z-disk is the actin cross-linker α-actinin. The calmodulin-like domain of α-actinin binds to the Z-repeats of titin. However, the mechanical and kinetic properties of this important interaction are still unknown. Here, we use a dual-beam optical tweezers assay to study the mechanics of this interaction at the single-molecule level. A single interaction of α-actinin and titin turns out to be surprisingly weak if force is applied. Depending on the direction of force application, the unbinding forces can more than triple. Our results suggest a model where multiple α-actinin/Z-repeat interactions cooperate to ensure long-term stable titin anchoring while allowing the individual components to exchange dynamically.

Study of the complement activation by amyloid aggregates of smooth muscle titin in vitro.

The giant muscle protein, titin, is the third most abundant protein in muscle (after myosin and actin). It was shown previously that smooth muscle titin (SMT) with a molecular mass of 500 kDa can form in vitro amorphous amyloid aggregates in two conditions: in solution of low ionic strength (0.15 M Glycine-KOH, pH 7.0) (SMT(Gly) aggregates) and in solution with ionic strength in the physiological range (0.2 M KCl, 20 mM imidazole, pH 7.2-7.4) (SMT(KCl) aggregates). Such aggregation in vivo, which may play a pathological or functional role, is not excluded. In view of the fact that some pathological amyloids can activate the classical and alternative pathways of complement system, we investigated the binding of complement component C1q and C3b to smooth muscle titin amyloid aggregates. The binding of С1q and C3b to SMT aggregates was not observed with ELISA assay. Since SMT aggregates do not activate the complement system, they are hardly implicated in the inflammatory process caused by muscle damage in amyloidoses.Abbreviations: SMT: smooth muscle titin; SMT(KCl) aggregates: SMT aggregates in solution containing 0.2 M KCl, 10 mM imidazole, pH 7.0; SMT(Gly) aggregates: SMT aggregates in solution containing 0.15 M glycine-KOH, pH 7.2-7.4; MAC: membrane attack complex; DLS: dynamic light scattering; NHS: Normal Human Serum.