Nanophotonics-enabled solar membrane distillation for off-grid water purification.

With more than a billion people lacking accessible drinking water, there is a critical need to convert nonpotable sources such as seawater to water suitable for human use. However, energy requirements of desalination plants account for half their operating costs, so alternative, lower energy approaches are equally critical. Membrane distillation (MD) has shown potential due to its low operating temperature and pressure requirements, but the requirement of heating the input water makes it energy intensive. Here, we demonstrate nanophotonics-enabled solar membrane distillation (NESMD), where highly localized photothermal heating induced by solar illumination alone drives the distillation process, entirely eliminating the requirement of heating the input water. Unlike MD, NESMD can be scaled to larger systems and shows increased efficiencies with decreased input flow velocities. Along with its increased efficiency at higher ambient temperatures, these properties all point to NESMD as a promising solution for household- or community-scale desalination.

Identification by NMR of key compounds present in beer distillates and residual phases after dealcoholization by vacuum distillation.

BACKGROUND: Nowadays, low alcohol and non-alcohol beer intake has increased due to expanding concerns about healthy diets. However, there are still appreciable differences between non-alcoholic beer and conventional beer, particularly regarding flavor. Vacuum distillation is commonly used to remove ethanol from the beer in industrial processes and it is used here. RESULTS: The presence of n-propanol, isobutanol, 3-methylbutanol, 2-methylbutanol, 2-phenylethanol, ethyl acetate, isoamyl acetate, and acetaldehyde, which are key compounds responsible for aroma and flavor of beer, have been analyzed using nuclear magnetic resonance (NMR) spectroscopy in commercial beers and also in the corresponding distillates and residual phases after dealcoholization. CONCLUSION: The compounds present in each phase were identified by monodimensional and bidimensional NMR spectra. The compounds that are completely removed or that remain in the residue of the conventional beers studied are described in detail. The presence of these compounds in dealcoholized beer would be beneficial in keeping the aroma and flavor in dealcoholized beer. © 2020 Society of Chemical Industry.

Simultaneous saccharification and fermentation of native rye, wheat and triticale starch.

BACKGROUND: The increasing global demand for starchy raw material requires new methods for obtaining ethanol from a range of plants using environmentally friendly methods. Granular starch-hydrolyzing enzymes (GSHE) can effectively support the development of the distillery industry. RESULTS: The aim of this study was to evaluate the effectiveness of simultaneous saccharification and fermentation of native rye, wheat or triticale starch. Mashes were prepared using methods that limit water and energy consumption (pre-hydrolysis at 35 °C for 30 min). The results show that the degree of starch saccharification depended on the raw material. However, the highest yields of ethanol were obtained with 100 kg of triticale mashes (38.9 ± 1.4 L absolute alcohol) as compared to rye and wheat mashes. The concentration of dry matter (between 250 and 280 g L-1 ) in the mashes was not associated with a decrease in ethanol yield and improved efficiency in the case of wheat and triticale. CONCLUSION: Simultaneous saccharification and fermentation offers a low-cost and environmentally friendly alternative to existing procedures for industrial ethanol production, which may be of particular interest to raw-spirit producers, as well as to the food and fermentation industry at large. © 2019 Society of Chemical Industry.

Influence of dye class on the comparison of direct contact and vacuum membrane distillation applied to remediation of dyeing wastewater.

This work investigated the influence of dye class on permeate flux and color rejection by comparing direct contact membrane distillation (DCMD) and vacuum membrane distillation (VMD) applied to remediation of dyeing wastewater. The same operating system at the feed side was used and the driving force of each configuration was determined. Reactive and disperse dye solutions were considered, and a commercial membrane was employed. Final color rejection > 90.79% was obtained, and water was recovered at the permeate side (final normalized permeate flux up to 38.92 kg m-2day-1kPa-1). VMD showed higher normalized permeate flux when compared to DCMD. However, the performance according to dye class depended on MD configuration. Reactive dye resulted in higher permeate flux than the disperse dye solution in DCMD. Contrarily, disperse dye solution showed higher permeate flux in VMD. The formation of a concentration boundary layer at the permeate membrane interface was suggested with disperse dye solution in DCMD, decreasing thus the driving force. In VMD, the boundary effect is negligible with disperse dye solution. This result implies that the VMD performance in the textile industry may depend more on driving force rather than the dye class of the dyeing bath.

Preparation and Application of Standardized Typical Volatile Components Fraction from Turmeric (Curcuma longa L.) by Supercritical Fluid Extraction and Step Molecular Distillation.

A green and reliable method using supercritical fluid extraction (SFE) and molecular distillation (MD) was optimized for the separation and purification of standardized typical volatile components fraction (STVCF) from turmeric to solve the shortage of reference compounds in quality control (QC) of volatile components. A high quality essential oil with 76.0% typical components of turmeric was extracted by SFE. A sequential distillation strategy was performed by MD. The total recovery and purity of prepared STVCF were 97.3% and 90.3%, respectively. Additionally, a strategy, i.e., STVCF-based qualification and quantitative evaluation of major bioactive analytes by multiple calibrated components, was proposed to easily and effectively control the quality of turmeric. Compared with the individual calibration curve method, the STVCF-based quantification method was demonstrated to be credible and was effectively adapted for solving the shortage of reference volatile compounds and improving the QC of typical volatile components in turmeric, especially its functional products.

Sensory quality of milk fat with low cholesterol content fractioned by molecular distillation.

BACKGROUND: Anhydrous milk fat (AMF) is a valuable ingredient in several industries, but its cholesterol content is a disadvantage because it is associated with several diseases. The objective of this study was to remove the largest possible amount of cholesterol from AMF by molecular distillation and to analyze the sensory properties of the obtained product. AMF was subjected to various molecular distillation arrangements. RESULTS: The first set of experiments involved molecular distillations performed over a range of evaporation temperatures. Then, according to the outcome of the first set of experiments, a second set of experiments was carried out in order to study the effect of the feeding flow rate. Finally, the number of distillation stages was modified. CONCLUSION: The best results were obtained in a three-stage arrangement, in which ∼60% of cholesterol was removed with a 30.48% distillate yield. The sensory properties of this distillation cut were also the most similar to those of the untreated milk fat. © 2018 Society of Chemical Industry.

Anaerobic treatment of blended sugar industry and ethanol distillery wastewater through biphasic high rate reactor.

This study aimed to investigate the physicochemical properties of sugar industry and ethanol distillery wastewater and the treatment of the blended wastewater through a two-stage anaerobic reactor. For this treatment, different initial chemical oxygen demand (COD) concentrations (5-20 g/L) and hydraulic retention times (HRTs) (2-10 days) were applied. The sugar industry effluent characteristics obtained in terms of organic matter (mg/L) were as follows: 5 days biochemical oxygen demand (BOD5): 654.5-1,968; COD: 1,100-2,148.9; total solids (TS): 2,467-4,012 mg/L; and pH: 6.93-8.43. The ethanol distillery spent wash strengths obtained were: BOD5: 27,600-42,921 mg/L; COD: 126,000-167,534 mg/L; TS: 140,160-170,000 mg/L; and pH: 3.9-4.2. Maximum COD removal of 65% was obtained at optimum condition (initial COD concentration of 10 g/L and HRT of 10 days), and maximum color removal of 79% was recorded under similar treatment conditions. Hence, the performance of the two-stage anaerobic reactor for simultaneous removal of COD and color from high-strength blended wastewater is promising for scaling up in order to mitigate environmental problems of untreated effluent discharge.

Direct contact membrane distillation for textile wastewater treatment: a state of the art review.

To meet surging water demands, water reuse is being sought as an alternative to traditional water resources. Direct contact membrane distillation (DCMD) has been increasingly studied in the past decade for its potential as an emerging cost effective wastewater treatment process and subsequent water reuse. This review presents a comprehensive overview of the current progress in the application of DCMD for textile wastewater treatment based on the available state of the art. There are already published review papers about the membrane distillation process, but the difference in the present work is that it focuses on the textile area, which consumes a lot of water and generates large amounts of wastewater, and still needs innovations in the sector. A review focused on the textile sector draws the attention of professionals to the problem and, consequently, to a solution. Current issues such as the influences of feed solution, membrane characteristics and membrane fouling and new insights are discussed. The main performance operating conditions and their effects on the separation process are given. Likewise, challenges associated with the influence of different dyes on the DCMD results are explained. This review also highlights the future research directions for DCMD to achieve successful implementation in the textile industry.

Composite Membrane with Underwater-Oleophobic Surface for Anti-Oil-Fouling Membrane Distillation.

In this study, we fabricated a composite membrane for membrane distillation (MD) by modifying a commercial hydrophobic polyvinylidene fluoride (PVDF) membrane with a nanocomposite coating comprising silica nanoparticles, chitosan hydrogel and fluoro-polymer. The composite membrane exhibits asymmetric wettability, with the modified surface being in-air hydrophilic and underwater oleophobic, and the unmodified surface remaining hydrophobic. By comparing the performance of the composite membrane and the pristine PVDF membrane in direct contact MD experiments using a saline emulsion with 1000 ppm crude oil (in water), we showed that the fabricated composite membrane was significantly more resistant to oil fouling compared to the pristine hydrophobic PVDF membrane. Force spectroscopy was conducted for the interaction between an oil droplet and the membrane surface using a force tensiometer. The difference between the composite membrane and the pristine PVDF membrane in their interaction with an oil droplet served to explain the difference in the fouling propensities between these two membranes observed in MD experiments. The results from this study suggest that underwater oleophobic coating can effectively mitigate oil fouling in MD operations, and that the fabricated composite membrane with asymmetric wettability can enable MD to desalinate hypersaline wastewater with high concentrations of hydrophobic contaminants.

Optimization of permeate flux produced by solar energy driven membrane distillation process using central composite design approach.

Membrane distillation (MD) is considered as a relatively high-energy requirement. To overcome this drawback, it is recommended to couple the MD process with solar energy as the renewable energy source in order to provide heat energy required to optimize its performance to produce permeate flux. In the present work, an original solar energy driven direct contact membrane distillation (DCMD) pilot plant was built and tested under actual weather conditions at Jeddah, KSA, in order to model and optimize permeate flux. The dependency of permeate flux on various operating parameters such as feed temperature (46.6-63.4°C), permeate temperature (6.6-23.4°C), feed flow rate (199-451L/h) and permeate flow rate (199-451L/h) was studied by response surface methodology based on central composite design approach. The analysis of variance (ANOVA) confirmed that all independent variables had significant influence on the model (where P-value <0.05). The high coefficient of determination (R(2) = 0.9644 and R(adj)(2) = 0.9261) obtained by ANOVA demonstrated good correlation between experimental and predicted values of the response. The optimized conditions, determined using desirability function, were T(f) = 63.4°C, Tp = 6.6°C, Q(f) = 451L/h and Q(p) = 451L/h. Under these conditions, the maximum permeate flux of 6.122 kg/m(2).h was achieved, which was close to the predicted value of 6.398 kg/m(2).h.

Potential of membrane distillation for production of high quality fruit juice concentrate.

Fruit juices are generally concentrated in order to improve the stability during storage and to reduce handling, packaging, and transportation costs. Thermal evaporation is the most widely used technique in industrial fruit juice concentrate production. In addition to high energy consumption, a large part of the characteristics determining the quality of the fresh juice including aroma, color, vitamins, and antioxidants undergoes remarkable alterations through the use of high operation temperatures. Increasing consumer demand for minimally or naturally processed stable products able to retain as much possible the uniqueness of the fresh fruit has engendered a growing interest for development of nonthermal approaches for fruit juice concentration. Among them, membrane distillation (MD) and its variants have attracted much attention for allowing very high concentrations to be reached under atmospheric pressure and temperatures near ambient temperature. This review will provide an overview of the current status and recent developments in the use of MD for concentration of fruit juices. In addition to the most basic concepts of MD variants, crucial suggestions for membrane selection and operating parameters will be presented. Challenges and future trends for industrial adaptation taking into account the possibility of integrating MD with other existing processes will be discussed.

Use of solar distillation for olive mill wastewater drying and recovery of polyphenolic compounds.

Olive mill wastewater (OMW) is characterized by its high organic load and the presence of phenolic compounds. For first time, a solar distillator was used to investigate the simultaneous solar drying of OMW and the recovery of phenolic compounds with antioxidant properties in the distillate. Two experiments were conducted and the role of thermal insulation on the performance of the distiller was studied. The use of insulation resulted to higher temperatures in the distillator (up to 84.3 °C and 78.5 °C at the air and sludge, respectively), shorter period for OMW dewatering (14 days), while it increased the performance of distillator by 26.1%. Chemical characterization of the distillate showed that pH and COD concentration gradually decreased during the experiments, whereas an opposite trend was noticed for conductivity and total phenols concentration. Almost 4% of the total phenols found initially in OMW were transferred to the distillate when an insulated solar distillator was used. Gas chromatographic analysis of collected distillates confirmed the presence of tyrosol in all samples; whereas hydroxytyrosol was found only in fresh collected distillate samples. Further experiments should be conducted to optimize the process and quantify the concentrations of recovered phenolic compounds.

Fouling and long-term durability of an integrated forward osmosis and membrane distillation system.

An integrated forward osmosis (FO) and membrane distillation (MD) system has great potential for sustainable wastewater reuse. However, the fouling and long-term durability of the system remains largely unknown. This study investigates the fouling behaviour and efficiency of cleaning procedures of FO and MD membranes used for treating domestic wastewater. Results showed that a significant decline in flux of both FO and MD membranes were observed during treatment of wastewater with organic foulants. However, shear force generated by the increased cross-flow physically removed the loosely attached foulants from the FO membrane surface and resulted in 86-88% recovery of flux by cleaning with tap water. For the MD membrane, almost no flux recovery was achieved due to adsorption of organic foulants on the hydrophobic membrane surface, thus indicating significant irreversible fouling/wetting, which may not be effectively cleaned even with chemical reagents. Long-term (10 d) tests showed consistent performance of the FO membrane by rejecting the contaminants. However, organic foulants reduced the hydrophobicity of the MD membrane, caused wetting problems and allowed contaminants to pass through. The results demonstrate that combination of the FO and MD processes can effectively reduce irreversible membrane fouling and solve the wetting problem of the MD membrane.

Recovery of salts from ion-exchange regeneration streams by a coupled nanofiltration-membrane distillation process.

Ion-exchange tap water demineralization for process water preparation results in a saline regeneration wastewater (20-100 mS cm(-1)) that is increasingly problematic in view of discharge. A coupled nanofiltration-membrane distillation (NF-MD) process is evaluated for the recovery of water and sodium chloride from this wastewater. NF-MD treatment of mixed regeneration wastewater is compared to NF-MD treatment of separate anion- and cation-regenerate fractions. NF on mixed regeneration wastewater results in a higher flux (30 L m(-2) h(-1) at 7 bar) compared to NF on the separate fractions (6-9 L m(-2) h(-1) at 30 bar). NF permeate recovery is strongly limited by scaling (50% for separate and 60% for mixed, respectively). Physical signs of scaling were found during MD treatment of the NF permeates but did not result in flux decline for mixed regeneration wastewater. Final salt composition is expected to qualify as a road de-icing salt. NF-MD is an economically viable alternative compared to external disposal of wastewater for larger-scale installations (1.4 versus 2.5 euro m(-3) produced demineralized water for a 10 m3 regenerate per day plant). The cost benefits of water re-use and salt recuperation are small when compared to total treatment costs for mixed regenerate wastewater.

EFFECTIVENESS OF THE DERYNG AND CLEVENGER-TYPE APPARATUS IN ISOLATION OF VARIOUS TYPES OF COMPONENTS OF ESSENTIAL OIL FROM THE MUTELINA PURPUREA THELL. FLOWERS.

In this study, both qualitative and quantitative analyses of chemical composition of M. purpurea essential oil obtained in the Deryng and Clevenger-type apparatuses were compared. As a result, content of volatile compounds were: 785.67 mg/mL and 833.33 mg/mL in the oil obtained in the Deryng (D-EO) and Clevenger-type apparatuses (C-EO), respectively. The major components of both essential oils from M. purpurea were: a-pinene, sabinene, myrcene, (Z)-sesquisabinene hydrate, (E)-sesquisabinene hydrate, and a-bis-abolol. The correlation coefficients values are not determined by the differences in the concentrations of the components resulting from the application of two different methods of distillation.

Fabrication of bioinspired composite nanofiber membranes with robust superhydrophobicity for direct contact membrane distillation.

The practical application of membrane distillation (MD) for water purification is hindered by the absence of desirable membranes that can fulfill the special requirements of the MD process. Compared to the membranes fabricated by other methods, nanofiber membranes produced by electrospinning are of great interest due to their high porosity, low tortuosity, large surface pore size, and high surface hydrophobicity. However, the stable performance of the nanofiber membranes in the MD process is still unsatisfactory. Inspired by the unique structure of the lotus leaf, this study aimed to develop a strategy to construct superhydrophobic composite nanofiber membranes with robust superhydrophobicity and high porosity suitable for use in MD. The newly developed membrane consists of a superhydrophobic silica-PVDF composite selective skin formed on a polyvinylidene fluoride (PVDF) porous nanofiber scaffold via electrospinning. This fabrication method could be easily scaled up due to its simple preparation procedures. The effects of silica diameter and concentration on membrane contact angle, sliding angle, and MD performance were investigated thoroughly. For the first time, the direct contact membrane distillation (DCMD) tests demonstrate that the newly developed membranes are able to present stable high performance over 50 h of testing time, and the superhydrophobic selective layer exhibits excellent durability in ultrasonic treatment and a continuous DCMD test. It is believed that this novel design strategy has great potential for MD membrane fabrication.

Recovery of cellulase activity after ethanol stripping in a novel pilot-scale unit.

Recycling of enzymes has a potential interest during cellulosic bioethanol production as purchasing enzymes is one of the largest expenses in the process. By recycling enzymes after distillation, loss of sugars and ethanol are avoided, but depending on the distillation temperature, there is a potential risk of enzyme degradation. Studies of the rate of enzyme denaturation based on estimation of the denaturation constant K D was performed using a novel distillation setup allowing stripping of ethanol at 50-65 °C. Experiments were performed in a pilot-scale stripper, where the effect of temperature (55-65 °C) and exposure to gas-liquid and liquid-heat transmission interfaces were tested on a mesophilic and thermostable enzyme mixture in fiber beer and buffer. Lab-scale tests were included in addition to the pilot-scale experiments to study the effect of shear, ethanol concentration, and PEG on enzyme stability. When increasing the temperature (up to 65 °C) or ethanol content (up to 7.5 % w/v), the denaturation rate of the enzymes increased. Enzyme denaturation occurred slower when the experiments were performed in fiber beer compared to buffer only, which could be due to PEG or other stabilizing substances in fiber beer. However, at extreme conditions with high temperature (65 °C) and ethanol content (7.5 % w/v), PEG had no enzyme stabilizing effect. The novel distillation setup proved to be useful for maintaining enzyme activity during ethanol extraction.

Water reclamation from shale gas drilling flow-back fluid using a novel forward osmosis-vacuum membrane distillation hybrid system.

This study examined the performance of a novel hybrid system of forward osmosis (FO) combined with vacuum membrane distillation (VMD) for reclaiming water from shale gas drilling flow-back fluid (SGDF). In the hybrid FO-VMD system, water permeated through the FO membrane into a draw solution reservoir, and the VMD process was used for draw solute recovery and clean water production. Using a SGDF sample obtained from a drilling site in China, the hybrid system could achieve almost 90% water recovery. Quality of the reclaimed water was comparable to that of bottled water. In the hybrid FO-VMD system, FO functions as a pre-treatment step to remove most contaminants and constituents that may foul or scale the membrane distillation (MD) membrane, whereas MD produces high quality water. It is envisioned that the FO-VMD system can recover high quality water not only from SGDF but also other wastewaters with high salinity and complex compositions.

Evaluation method of membrane performance in membrane distillation process for seawater desalination.

Membrane distillation (MD) is an emerging desalination technology as an energy-saving alternative to conventional distillation and reverse osmosis method. The selection of appropriate membrane is a prerequisite for the design of an optimized MD process. We proposed a simple approximation method to evaluate the performance of membranes for MD process. Three hollow fibre-type commercial membranes with different thicknesses and pore sizes were tested. Experimental results showed that one membrane was advantageous due to the highest flux, whereas another membrane was due to the lowest feed temperature drop. Regression analyses and multi-stage calculations were used to account for the trade-offeffects of flux and feed temperature drop. The most desirable membrane was selected from tested membranes in terms of the mean flux in a multi-stage process. This method would be useful for the selection of the membranes without complicated simulation techniques.

A forward osmosis-membrane distillation hybrid process for direct sewer mining: system performance and limitations.

This study demonstrates the robustness and treatment capacity of a forward osmosis (FO)-membrane distillation (MD) hybrid system for small-scale decentralized sewer mining. A stable water flux was realized using a laboratory-scale FO-MD hybrid system operating continuously with raw sewage as the feed at water recovery up to 80%. The hybrid system also showed an excellent capacity for the removal of trace organic contaminants (TrOCs), with removal rates ranging from 91 to 98%. The results suggest that TrOC transport through the FO membrane is governed by "solute-membrane" interaction, whereas that through the MD membrane is strongly correlated to TrOC volatility. Concentrations of organic matter and TrOCs in the draw solution increased substantially as the water recovery increased. This accumulation of some contaminants in the draw solution is attributed to the difference in their rejection by the FO and MD systems. We demonstrate that granular activated carbon adsorption or ultraviolet oxidation could be used to prevent contaminant accumulation in the draw solution, resulting in near complete rejection (>99.5%) of TrOCs.