Performance of laterally elongated pillar array columns in capillary electrochromatography mode.

In the present study, cylindrical and laterally elongated pillar array columns were investigated for use in capillary electrochromatography. Minimal theoretical plate heights of H = 1.90 and 1.46 µm (in absence of sidewall effect) were obtained for coumarin C440 under unretained conditions for cylindrical and rectangular (laterally elongated, aspect ratio 4) pillar array columns, respectively. By comparing dispersion at the entire channel width to that at the central zone only, it appears that sidewall related dispersion significantly contributes to overall dispersion. A 40% reduction of the plate height was observed by taking into account only the central channel zone. A kinetic plot analysis was performed to evaluate the potential of the studied geometries by considering a maximum operating voltage of 20 kV as limiting parameter. It was demonstrated that rectangular radially elongated pillars produce a higher efficiency than cylindrical pillars and other microfabricated column structures for microchip capillary electrochromatography previously studied.

Chiral metal-organic cages used as stationary phase for enantioseparations in capillary electrochromatography.

Since some metal-organic cages (MOCs) have been synthesized in past several years, the applications of MOCs such as drug delivery, molecular recognition, separation, catalysis, and gas storage, etc. have been witnessed with a significant increase. However, to the best of our knowledge, so far no one has used MOCs as chiral stationary phase to separate chiral compounds in CEC. In this study, three MOCs were developed as the stationary phase for CEC separation of enantiomers. The MOCs coated capillary column showed good chiral recognition ability for some chiral compounds, including amine, alcohols, ketone, etc. The influence of buffer concentration, applied voltage, pH of buffer solution on the chiral separations was also investigated. The RSDs of run-to-run, day-to-day, and column-to-column for retention time were 2.1-4.67%, 1.2-4.36%, and 3.62-6.43%, respectively. This work reveals that the chiral MOCs material is feasible for the enantioseparation in CEC.

Open-tubular nanoelectrochromatography (OT-NEC): gel-free separation of single stranded DNAs (ssDNAs) in thermoplastic nanochannels.

Electrophoresis or electrochromatography carried out in nanometer columns (width and depth) offers some attractive benefits compared to microscale columns. These advantages include unique separation mechanisms that are scale dependent, fast separation times, and simpler workflow due to the lack of a need for column packing and/or wall coatings to create a stationary phase. We report the use of thermoplastics, in this case PMMA, as the substrate for separating single-stranded DNAs (ssDNAs). Electrophoresis nanochannels were created in PMMA using nanoimprint lithography (NIL), which can produce devices at lower cost and in a higher production mode compared to the fabrication techniques required for glass devices. The nanochannel column in PMMA was successful in separating ssDNAs in free solution that was not possible using microchip electrophoresis in PMMA. The separation could be performed in <1 s with resolution >1.5 when carried out using at an electric field strength of 280 V/cm and an effective column length of 60 µm (100 nm × 100 nm, depth and width). The ssDNAs transport through the PMMA column was driven electrokinetically under the influence of an EOF. The results indicated that the separation was dominated by chromatographic effects using an open tubular nano-electrochromatography (OT-NEC) mode of separation. Interesting to these separations was that no column packing was required nor a wall coating to create the stationary phase; the separation was affected using the native polymer that was UV/O3 activated and an aqueous buffer mobile phase.

Evaluation of chiral separation based on bovine serum albumin-conjugated carbon nanotubes as stationary phase in capillary electrochromatography.

In this work, we utilized adsorbed BSA and multiwalled carbon nanoparticles (BSA/MWCNTs) as a stationary phase in open tubular (OT) capillary for separation of chiral drugs. (3-Aminopropyl)triethoxysilane was used to assist fabrication of BSA/MWCNTs-coated OT column by covalent bonding. Incorporation of MWCNTs nanomaterials into a polymer matrix could increase the phase ratio and take advantage of the easy preparation of an open tubular CEC column. SEM was carried out to characterize the BSA/MWCNTs OT columns. The electrochromatographic performance of the OT columns was evaluated by separation of ketoprofen, ibuprofen, uniconazole, and hesperidin. The effects of MWCNTs concentration, background solution pH and concentration, and applied voltage on separation were investigated. Chiral separations of ketoprofen, ibuprofen, uniconazole, and hesperidin were achieved using the BSA/MWCNTs-coated OT column with resolutions of 24.20, 12.81, 1.50, and 1.85, respectively. Their optimas were found in the 30 mM phosphate buffers at pH 5.0, 6.5, 7.0, and 6.5, respectively. In addition, the columns demonstrated good repeatability and stability with the run-to-run, day-to-day, and batch-to-batch RSDs of migration times less than 3.5%.

Metal organic framework ZIF-90 modified with lactobionic acid for use in improved open tubular capillary electrochromatographic enantioseparation of five basic drugs.

An in situ zeolite imidazole metal organic framework-90 (ZIF-90) modified capillary was prepared via the method of solvothermal synthesis. The coating of ZIF-90 was characterized by scanning electron microscopy, energy-dispersive X-ray spectrometry, and EOF. Capillary electrochromatography-based enantioseparation of the basic drugs propranolol (PRO), metoprolol (MET), atenolol (ATE), bisoprolol (BIS), and sotalol (SOT) was performed using lactobionic acid (LA) as the chiral selector. Compared with an uncoated silica capillary, the resolutions are greatly improved (PRO 1.40 → 3.23; MET 1.07 → 3.19; ATE 1.07 → 3.15; BIS 1.16 → 3.41; SOT 1.00 → 2.79). Effects of buffer pH values, proportion of organic additives, concentration of lactobionic acid, and applied voltage were investigated. Graphical abstract Schematic presentation of the preparation of zeolitic imidazolate framework-90 (ZIF-90) modified capillary (ZIF-90@capillary) for enantioseparation of drug enantiomers. The capillary was applied to construct capillary electrochromatography system with lactobionic acid for enantioseparation of basic chiral drugs.

Preparation of a polyhedral oligomeric silsesquioxanes hybrid monolith via a single-step ring-opening polymerization for pressurized capillary electrochromatography.

An organic-silica hybrid monolith was prepared by a single-step ring-opening polymerization of octaglycidyldimethylsilyl polyhedral oligomeric silsesquioxane (POSS-epoxy), polyethylenimine (PEI), and ß-cyclodextrin (ß-CD) in a ternary porogenic solvent consisting of polyethylene glycol, 1,4-butanediol, and 1-propanol. The framework of POSS-PEI hybrid monolith could offer well-defined 3D skeleton, while ß-CD with the ability of forming a host-guest inclusion complexes with a variety of compounds could show an ability of specific selection. The obtained hybrid monoliths were successfully applied for separation of phenols, benzoic acids, and nucleobases. Especially due to the introduction of ß-CD, positional isomers including hydroquinone and resorcinol, o-nitrophenol and p-nitrophenol, as well as p-chlorophenol and o-chlorophenol were baseline separated and the column efficiency reached 82 300 plates/m for hydroquinone.

Open-tubular capillary electrochromatography with ß-cyclodextrin-functionalized magnetic nanoparticles as stationary phase for enantioseparation of dansylated amino acids.

Magnetic nanoparticles (MNPs) modified with ß-cyclodextrin and mono-6-deoxy-6-(1-methylimidazolium)-ß-cyclodextrin tosylate (an ionic liquid), which called MNP-ß-CD and MNP-ß-CD-IL, were coated into the capillary inner wall. Compared to an uncoated capillary, the new systems show good reproducibility and durability. The systems based on the use of MNP-ß-CD or MNP-ß-CD-IL as stationary phases were established for enantioseparation of Dns-modified amino acids. Improved resolutions were obtained for both CEC systems. Primary parameters such as running buffer pH value and applied voltage were systematically optimized in order to obtain optimal enantioseparations. Under the optimized conditions, the capillaries exhibited excellent chiral recognition ability for six Dns-amino acids (the DL-forms of alanine, leucine, lsoleucine, valine, methionine, glutamic acid) and provided a promising way for the preparation of chiral column. Graphical Abstract Schematic presentation of the open-tubular capillary electrochromatography systems with MNP-ß-CD and MNP-ß-CD-IL as stationary phases for enantioseparation of dansylated amino acids.

Enantioseparation of propranolol, amlodipine and metoprolol by electrochromatography using an open tubular capillary modified with ß-cyclodextrin and poly(glycidyl methacrylate) nanoparticles.

The inner wall of a capillary was coated with glycidyl methacrylate (GMA) to form tentacle-type coating, and poly(glycidyl methacrylate) nanoparticles (PGMA NPs) were then immobilized on the film. Ethanediamine-ß-cyclodextrin as chiral selector was covalently bonded into the PGMA NPs through the ring-open reaction. The materials were characterized by SEM, TEM and FT-IR. The modified column was applied to the enantioseparation of the racemates of propranolol, amlodipine and metoprolol. Compared to a capillary with a single layer of CD-PGMA (without GMA coating) and to a CD-GMA system (without PGMA nanoparticles), the performance of the capillary is strongly improved. The effects of buffer pH value and applied voltage were optimized. Best resolutions (propranolol: 1.27, metoprolol: 1.01 and amlodipine: 2.93) were obtained when using the PGMA-coated capillary system. The run-to-run, day-to-day and column-to-column reproducibility were tested and found to be highly attractive. The new stationary phase is likely to have a large potential and scope in that it may also be applied to chiral separations of other enantiomers, such as amino acids and biogenic amines. Graphical abstract Schematic presentation of the preparation of a capillary column with glycidyl methacrylate (GMA) coating which was then immobilized with poly(glycidyl methacrylate) nanoparticles and ethanediamine-ß-cyclodextrin. This novel open tubular column was applied to construct capillary electrochromatography system for separation of basic racemic drugs.

Metal organic framework HKUST-1 modified with carboxymethyl-ß-cyclodextrin for use in improved open tubular capillary electrochromatographic enantioseparation of five basic drugs.

This work shows that the metal organic framework (MOF) HKUST-1 of type Cu3(BTC)2 (also referred to as MOF-199; a face-centered-cubic MOF containing nanochannels) is a most viable coating for use in enantioseparation in capillary electrochromatography (CEC). A HKUST-1 modified capillary was prepared and characterized by scanning electron microscopy, transmission electron microscopy, Fourier transform infrared spectra, elemental analysis and thermogravimetric analysis. CEC-based enantioseparation of the basic drugs propranolol (PRO), esmolol (ESM), metoprolol (MET), amlodipine (AML) and sotalol (SOT) was performed by using carboxymethyl-ß-cyclodextrin as the chiral selector. Compared with a fused-silica capillary, the resolutions are improved (ESM: 1.79; MET: 1.80; PRO: 4.35; SOT: 1.91; AML: 2.65). The concentration of chiral selector, buffer pH value, applied voltage and buffer concentration were optimized, and the reproducibilities of the migration times and Rs values were evaluated. Graphical abstract Schematic presentation of the preparation of a HKUST-1@capillary for enantioseparation of racemic drugs. Cu(NO3)2 and 1,3,5-benzenetricarboxylic acid (BTC) were utilized to prepare the HKUST-1@capillary. Then the capillary was applied to construct capillary electrochromatography system with carboxymethyl-ß-cyclodextrin (CM-ß-CD) for separation of basic racemic drugs.

Quinine-modified polymer monolithic column with reversed-phase /strong anion-exchange mixed-mode for pressurized capillary electrochromatography.

Via the facile ring-opening reaction of epoxy groups with quinine, a novel polymer monolith with quaternary ammonium for reversed-phase/strong anion-exchange mixed-mode has been fabricated for pressurized capillary electrochromatography (pCEC). Optimization on the preparation of quinine-modified monoliths has been investigated, and characteristics including morphology, permeability, mechanical stability, reproducibility, and column performance have been also studied. Active quaternary ammonium groups were conveniently produced to generate cationic action sites and stable anodic electroosmotic flow. Multiple interactions including reversed-phase, strong anion-exchange, electrostatic repulsion and π-π stacking interactions were obtained. Satisfactory separation capability of various analytes such as alkylbenzenes, polycyclic aromatic hydrocarbons, benzoic acid and its homologs, and ß2 -receptor excitants has been achieved. Applied to the real sample, the good resolution of three alkaloids in Corydalis yanhusuo were achieved by pCEC with the quinine-modified monolith. The results light a potential access to facilely fabricating quaternary ammonium-functionalized polymer monolith with multiple interactions for efficient electrochromatography profiling of various compounds.

Nano-amylose-2,3-bis(3,5-dimethylphenylcarbamate)-silica hybrid sol immobilized on open tubular capillary column for capillary electrochromatography enantioseparation.

The chiral organic-inorganic hybrid materials can exhibit a high loading, and the chiral selector nanoparticles can create efficient stationary phases for open-tubular capillary electrochromatography (OT-CEC). Hence, a novel protocol for the preparation of an OT column coated with nano-amylose-2,3-bis(3,5-dimethylphenylcarbamate) (nano-ABDMPC)-silica hybrid sol through in situ layer-by-layer self-assembly method was developed for CEC enantioseparation. By controlling the assembly cycle number of nano-ABDMPC-silica hybrid sol, a homogeneous, dense and stable coating was successfully prepared, which was confirmed by SEM and elemental analysis. As the main parameter influencing the chiral separating effect, the nano-ABDMPC bearing 3-(triethoxysilyl)propyl residues concentration was investigated. The experimental results showed that 10.0 mg/mL nano-ABDMPC bearing 3-(triethoxysilyl)propyl residues coated OT capillary column possessed chiral recognition ability toward the six enantiomers (phenylalanine, tyrosine, tryptophan, phenethyl alcohol, 1-phenyl-2-propanol, and Tröger's base) at some of the different conditions tested. Additionally, the coated OT column revealed adequate repeatability concerning run-to-run, day-to-day and column-to-column. These results demonstrated the promising applicability of nano-ABDMPC-silica hybrid sol coated OT column in CEC enantioseparations.

Organic polymer-based monolithic stationary phases with incorporated nanostructured materials for HPLC and CEC.

This review article is concerned with the recent advances made in the field of organic polymer-based monoliths with incorporated nanostructured materials (NSMs) for use in liquid chromatography and capillary electrochromatography. It covers the pertinent literature published over the last 7-8 years with a total of 56 references. The present article has two distinct parts: one major part encompassing "traditional" organic polymer-based monoliths modified with NSMs and a minor part on cryogels modified with NSMs.

Open-tubular capillary electrochromatography using carboxylatopillar[5]arene as stationary phase.

Pillar[n]arenes have achieved much interest in material chemistry and supramolecular chemistry due to unusual pillar shape structure and high selectivity toward guest. However, pillar[n]arenes have not yet been applied in capillary electrochromatography. This work at first time reports that carboxylatopillar[5]arene is used as a stationary phase in open-tubular capillary electrochromatography. Carboxylatopillar[5]arene not only possess the advantages of pillar[n]arenes but also provide free carboxy groups for immobilizing on the inner wall of capillary column via covalent bonding. The characterization of SEM and FT-IR indicated that carboxylatopillar[5]arene was successfully grafted on the inner wall of capillary. The baseline separation of model analytes including neutral, basic, and acidic compounds, nonsteroidal anti-inflammatory drugs and dansyl-amino acids have been achieved thanks to the electron-rich cavity of carboxylatopillar[5]arene and hydrophobic interactions between the analytes and stationary phase. The intraday, interday, and column-to-column precisions (RSDs) of retention time and peak area for the neutral analytes were all less than 3.34 and 9.65%, respectively. This work indicates that pillar[n]arenes have great potential in capillary electrochromatography as novel stationary phase.

Monolithic column functionalized with quinine derivative for anion-exchange capillary electrochromatography.

A novel anion-exchange organic polymer monolithic column based on monomers N-benzylquininium chloride and acrylamide were firstly prepared by in situ copolymerization for capillary electrochromatography. Moreover, N-benzylquininium was firstly introduced as a strong anion-exchange functional group. A relatively strong anodic EOF was obtained in the pH values from 4.0 to 9.0, which was in the same direction with the electrophoretic mobility of acid compounds. Hence, the anion-exchange monolithic column was very suitable for the rapid separation of acid compounds. Eight acid compounds (2-chlorobenzoic acid, mandelic acid, 4-hydroxybenzoic acid, indole-3-acetic acid, 2-aminoterephthalic acid, 3,5-pyridinedicarboxylic acid, benzoic acid, and 4-aminobenzoic acid) were successfully separated on the monolithic column. The highest column efficiency was 4.60 × 105 plates/m (theoretical plates, N) for 3,5-pyridinedicarboxylic acid. The proposed monolithic column was characterized by SEM and FT-IR. The RSDs of the acid compounds migration time for run-to-run, day-to-day, and column-to-column were all less than 5.0%.

Open-tubular capillary electrochromatographic determination of ten sulfonamides in tap water and milk by a metal-organic framework-coated capillary column.

In this study, a metal-organic framework (MOF), [Mn(cam)(bpy)], was synthesized and characterized by thermogravimetric analysis, scanning electron microscopy, and Fourier transform infrared spectrometry. An open-tubular capillary column was fabricated from [Mn(cam)(bpy)] via the amide coupling method. Ten types of sulfonamides were separated through the fabricated capillary column, which showed a good limits of detection (<0.07 µg/mL) and linear ranges (1-100 or 5-100 µg/mL) with a high correlation coefficients (R2 > 0.9987). The intra-day, inter-day and column-to-column relative standard deviations (RSDs) in the migration times ranged from 0.44 to 4.87%, and the peak area RSDs ranged from 0.80 to 7.28%. The developed capillary electrochromatography method can be successfully utilized for the determination of sulfonamides in tap water and milk samples.

Use of peak sharpening effects to improve the separation of chiral compounds with molecularly imprinted porous polymer layer open-tubular capillaries.

This investigation demonstrates the application of a new peak sharpening technique to improve the separation of difficult-to-resolve racemic mixtures in capillary electro-chromatography. Molecularly imprinted porous layer open tubular (MIP-PLOT) capillaries, prepared by a layer-on-layer polymerization approach with Z-l-Asp-OH as the template, were selected to validate the approach. SEM revealed that the polymer film thickness can be varied by changes in both the polymer composition and the layer-on-layer regime. Capillaries made with methacrylic acid as the functional monomer could not separate the Z-Asp-OH racemate, due to weak interactions between the MIP-PLOT material and the target analytes. In contrast, MIP-PLOT capillaries prepared with 4-vinylpyridine as the functional monomer resulted in increased ionic interactions with the target analytes. Separation of the enantiomers could be enhanced when a peak zone sharpening effect was exploited through the use of specific BGE compositions and by taking advantage of eigenpeak phenomena. In this manner, the position of a sharpening zone and the peak shape of the sample analytes could be fine-tuned, so that when the sharpening zone and the target analyte co-migrated the separation of the Z-l-Asp-OH enantiomer from its d-enantiomer in a racemic mixture could be achieved under overloading conditions.

Polar and nonpolar organic polymer-based monolithic columns for capillary electrochromatography and high-performance liquid chromatography.

This review article is a continuation of the previous reviews on the area of monolithic columns covering the progress made in the field over the last couple of years from the beginning of the second half of 2014 until the end of the first half of 2016. It summarizes and evaluates the evolvement of both polar and nonpolar organic monolithic columns and their use in hydrophilic interaction LC and CEC and reversed-phase chromatography and RP-CEC. The review article discusses the results reported in a total of 62 references.

A fast and accurate method for the pharmacokinetic research of four coumarin analogs in Fructus cnidii using capillary electro-chromatography with a methacrylate ester-based monolithic column.

In the present study, a monolithic capillary column with higher permeability was developed for the in vivo discrimination of four coumarin analogs (bergapten, 2'-acetylangelicin, imperatorin, and osthole) that typically require long separation times in HPLC. Instead of conventional methacrylate ester monolith (containing 19.5% porogen) with insufficient permeability (K = 1.52 - 1.66 × 10-14 M2 ) for plasma sample, the proposed column (20.5% porogen) had better permeability (around 3.80 × 10-14 M2 ) while properties such as pore distribution, stability, and resolution changed slightly. As a result, due to the negatively charged electro-dynamic flow of the methacrylate ester groups in the monolith, the migration of targeted analytes was achieved within 6 min (compared with 30 min in HPLC) with acceptable resolution and improved sensitivity (0.005-0.02 µg/mL vs. 0.04 µg/mL). The proposed method was also applied to pharmacokinetic research: accelerated solvent extraction (ASE) was used to improve the extraction efficiency, which prepared extract much faster and more pure than conventional methods. As the pharmacokinetic parameters indicated, the monolithic capillary electro-chromatography method was efficient, sensitive, specific, and durable, guaranteeing its utility for the determination of multiple structure-related compounds in rat plasma.

Advances in the development and applications of organic-silica hybrid monoliths.

This review will concentrate on recent progress (since 2013) toward preparation of organic-silica hybrid monoliths and their latest applications as extraction and separation media largely focusing on capillary liquid chromatography and capillary electrochromatography. Main emphasis will be given to advancement of approaches relying on the sol-gel chemistry of tetra- and tri-alkoxysilanes, sol-gel chemistry of alkoxysilanes and free-radical copolymerization with organic monomers, and free radical and ring-opening copolymerization of polyhedral oligomeric silsesquioxanes with organic monomers. Hybrid molecularly-imprinted polymer monoliths and hybrid monoliths made with non-silica-based precursors or in combination with metal alkoxides will be included as well.

Preparation of phosphorylcholine-based hydrophilic monolithic column and application for analysis of drug-related impurities with capillary electrochromatography.

A hydrophilic monolithic CEC column was prepared by thermal copolymerization of zwitterionic monomer 2-methacryloyloxyethyl phosphorylcholine (MPC), pentaerythritol triacrylate (PETA), either methacrylatoethyl trimethyl ammonium chloride (META) or sodium 2-methylpropene-1-sulfonate (MPS) in a polar binary porogen consisting of methanol and THF. A typical hydrophilic interaction LC retention mechanism was observed for low-molecular weight polar compounds including amides, nucleotides, and nucleosides in the separation mode of hydrophilic interaction CEC, when high content of ACN (>60%) was used as the mobile phase. The effect of the electrostatic interaction between the analytes and the stationary phase was found to be negligible. The poly(MPC-co-PETA-co-META or MPS) monolithic columns have an average column efficiency of 40 000 plates/m and displayed with a satisfactory repeatability in terms of migration time and peak areas. Finally, the column was successfully applied to determine the impurities of a positively charged drug pramipexole which are often separated by ion pair RP chromatography due to their high hydrophilicity. All four components can be baseline separated within 5 min with BGE consisting of ACN/20 mM ammonium formate buffer (pH 3.0; 80/20).