A real-time analysis of protein transport via the twin arginine translocation pathway in response to different components of the protonmotive force.

The twin arginine translocation (Tat) pathway transports folded protein across the cytoplasmic membrane in bacteria, archaea, and across the thylakoid membrane in plants as well as the inner membrane in some mitochondria. In plant chloroplasts, the Tat pathway utilizes the protonmotive force (PMF) to drive protein translocation. However, in bacteria, it has been shown that Tat transport depends only on the transmembrane electrical potential (Δψ) component of PMF in vitro. To investigate the comprehensive PMF requirement in Escherichia coli, we have developed the first real-time assay to monitor Tat transport utilizing the NanoLuc Binary Technology in E. coli spheroplasts. This luminescence assay allows for continuous monitoring of Tat transport with high-resolution, making it possible to observe subtle changes in transport in response to different treatments. By applying the NanoLuc assay, we report that, under acidic conditions (pH = 6.3), ΔpH, in addition to Δψ, contributes energetically to Tat transport in vivo in E. coli spheroplasts. These results provide novel insight into the mechanism of energy utilization by the Tat pathway.

Evaluation of PhenoMATRIX and PhenoMATRIX PLUS for the screening of MRSA from nasal and inguinal/perineal swabs using chromogenic media.

The objective of this study was to assess the clinical performances of PhenoMATRIX and PhenoMATRIX PLUS for the screening of methicillin-resistant Staphylococcus aureus (MRSA) from nasal and inguinal/perineal ESwabs using chromogenic media. The automated performances were compared to the manual reading. Additionally, we evaluated PhenoMATRIX PLUS for the automatic release of the negative results to the Laboratory Information System (LIS) and the automatic discharge of the negative plates from the incubators. A total of 6,771 non-duplicate specimens were used by PhenoMATRIX as a machine learning model. The validation of these settings was performed on 17,223 non-duplicate specimens. The MRSA positivity rate was 5% (866/17,223). Validated settings were then used by PhenoMATRIX PLUS on another 1,409 non-duplicate specimens. The sensitivities of PhenoMATRIX and PhenoMATRIX PLUS were 99.8% [95% confidence interval (CI), 99.2%-99.9%] and 100% (95% CI, 92.1%-100%), respectively. The specificities of PhenoMATRIX and PhenoMATRIX PLUS were 99.1% (95% CI, 99.0%-99.2%) and 95.2% (95% CI, 93.8%-96.1%), respectively. All the 1,297 MRSA-negative specimens analyzed by PhenoMATRIX PLUS were automatically released and sent to the LIS immediately after availability of the culture image on the WASPLab (100% accuracy). All negative media plates were automatically discarded. PhenoMATRIX PLUS decreases the time spent by technologists on negative plates and ensures optimal usage of the incubators' capacity.

Comparison of three rapid diagnostic tests for bloodstream infections using Benefit-risk Evaluation Framework (BED-FRAME).

Rapid diagnostic tests (RDTs) for bloodstream infections have the potential to reduce time to appropriate antimicrobial therapy and improve patient outcomes. Previously, an in-house, lipid-based, matrix-assisted laser desorption/ionization-time of flight mass spectrometry (MALDI-TOF MS) method, Fast Lipid Analysis Technique (FLAT MS), has shown promise as a rapid pathogen identification method. In this study, FLAT MS for direct from blood culture identification was evaluated and compared to FDA-cleared identification methods using the Benefit-risk Evaluation Framework (BED-FRAME) analysis. FLAT MS was evaluated and compared to Bruker Sepsityper and bioMérieux BioFire FilmArray BCID2 using results from a previous study. For this study, 301 positive blood cultures were collected from the University of Maryland Medical Center. The RDTs were compared by their sensitivities, time-to-results, hands-on time, and BED-FRAME analysis. The overall sensitivity of all platforms compared to culture results from monomicrobial-positive blood cultures was 88.3%. However, the three RDTs differed in their accuracy for identifying Gram-positive bacteria, Gram-negative bacteria, and yeast. Time-to-results for FLAT MS, Sepsityper, and BioFire BCID2 were all approximately one hour. Hands-on times for FLAT MS, Sepsityper, and BioFire BCID2 were 10 (±1.3), 40 (±2.8), and 5 (±0.25) minutes, respectively. BED-FRAME demonstrated that each RDT had utility at different pathogen prevalence and relative importance. BED-FRAME is a useful tool that can used to determine which RDT is best for a healthcare center.

Improved detection of mycobacteria in CF and tissue samples grown in mycobacteria growth indicator tube incubated at 30°C compared to conventional growth conditions of liquid and solid media.

This study evaluates the growth of mycobacteria in samples from cystic fibrosis (CF) patients and tissue samples using the mycobacteria growth indicator tube (MGIT) incubated at 30°C in comparison to conventional MGIT cultures incubated at 37°C in a BACTEC MGIT 960 device and solid media incubated at 36°C and 30°C. A total of 1,549 samples were analyzed, of which 202 mycobacterial isolates were cultured from 197 positive specimens, including five mixed cultures. The highest detection rate was achieved from MGIT at 30°C, with 84.2% of mycobacterial isolates (170 of 202), which was significantly higher than any other culture condition (P < 0.0001 for any condition). MGIT at 37°C yielded 61.4% (124 of 202) of the recovered isolates, whereas Löwenstein Jensen (LJ) and Stonebrink at 36°C, and LJ and Stonebrink at 30°C retrieved 47.0% (95), 49.5% (100), 50.0% (101), and 53.0% (107) of the isolates, respectively. Of the 53 isolates that were grown exclusively under one culture condition, the highest number of isolates (36) was recovered from MGIT incubated at 30°C. MGIT at 37°C recovered eight of the 53 isolates, whereas LJ incubated at 30°C and Stonebrink incubated at 30°C and 36°C recovered five, three, and one isolate, respectively. No isolates were grown exclusively from LJ incubated at 36°C. In CF patients and tissue samples, MGIT cultivated at 30°C for 8 weeks increases the performance of mycobacterial culture. IMPORTANCE: Our study shows that the addition of mycobacteria growth indicator tube (MGIT) liquid culture incubated at 30°C improves the detection of mycobacteria from CF and tissue samples. MGIT incubated at 30°C recovered significantly more mycobacterial isolates than MGIT incubated at 37°C and significantly more isolates than either Lowenstein Jensen or Stonebrink solid media incubated at either 36°C or 30°C. Of 202 mycobacterial isolates recovered from 1,549 specimens, 170 were recovered from MGIT incubated at 30°C, followed by MGIT incubated at 37°C with 124 isolates and solid media culture conditions that recovered between 95 and 107 mycobacterial isolates. All conventional culture conditions combined without MGIT incubated at 30°C recovered 166 isolates. MGIT incubated at 30°C recovered the highest number of isolates detected exclusively by a single culture condition and recovered mycobacterial isolates of highly relevant mycobacterial species, including Mycobacterium abscessus and Mycobacterium tuberculosis.

Performance of MALDI-TOF MS, real-time PCR, antigen detection, and automated biochemical testing for the identification of Burkholderia pseudomallei.

Burkholderia pseudomallei is the causative agent of melioidosis, a disease highly endemic to Southeast Asia and northern Australia, though the area of endemicity is expanding. Cases may occur in returning travelers or, rarely, from imported contaminated products. Identification of B. pseudomallei is challenging for laboratories that do not see this organism frequently, and misidentifications by matrix-assisted laser desorption/ionization time of flight mass spectrometry (MALDI-TOF MS) and automated biochemical testing have been reported. The in vitro diagnostic database for use with the Vitek MS has recently been updated to include B. pseudomallei and we aimed to validate the performance for identification in comparison to automated biochemical testing with the Vitek 2 GN card, quantitative real-time polymerase chain reaction (qPCR) targeting the type III secretion system, and capsular polysaccharide antigen detection using a lateral flow immunoassay (LFA). We tested a "derivation" cohort including geographically diverse B. pseudomallei and a range of closely related Burkholderia species, and a prospective "validation" cohort of B. pseudomallei and B. cepacia complex clinical isolates. MALDI-TOF MS had a sensitivity of 1.0 and specificity of 1.0 for the identification and differentiation of B. pseudomallei from related Burkholderia species when a certainty cutoff of 99.9% was used. In contrast, automated biochemical testing for B. pseudomallei identification had a sensitivity of 0.83 and specificity of 0.88. Both qPCR and LFA correctly identified all B. pseudomallei isolates with no false positives. Due to the high level of accuracy, we have now incorporated MALDI-TOF MS into our laboratory's B. pseudomallei identification workflow.IMPORTANCEBurkholderia pseudomallei causes melioidosis, a disease associated with high morbidity and mortality that disproportionately affects rural areas in Southeast Asia and northern Australia. The known area of endemicity is expanding and now includes the continental United States. Laboratory identification can be challenging which may result in missed or delayed diagnoses and poor patient outcomes. In this study, we compared mass spectrometry using an updated spectral database with multiple other methods for B. pseudomallei identification and found mass spectrometry highly accurate. We have therefore incorporated this fast and cost-effective method into our laboratory's workflow for B. pseudomallei identification.

Automated detection of methicillin-resistant Staphylococcus aureus with the MRSA CHROM imaging application on BD Kiestra Total Lab Automation System.

The virulence of methicillin-resistant Staphylococcus aureus (MRSA) and its potentially fatal outcome necessitate rapid and accurate detection of patients colonized with MRSA in healthcare settings. Using the BD Kiestra Total Lab Automation (TLA) System in conjunction with the MRSA Application (MRSA App), an imaging application that uses artificial intelligence to interpret colorimetric information (mauve-colored colonies) indicative of MRSA pathogen presence on CHROMagar chromogenic media, anterior nares specimens from three sites were evaluated for the presence of mauve-colored colonies. Results obtained with the MRSA App were compared to manual reading of agar plate images by proficient laboratory technologists. Of 1,593 specimens evaluated, 1,545 (96.98%) were concordant between MRSA App and laboratory technologist reading for the detection of MRSA growth [sensitivity 98.15% (95% CI, 96.03, 99.32) and specificity 96.69% (95% CI, 95.55, 97.60)]. This multi-site study is the first evaluation of the MRSA App in conjunction with the BD Kiestra TLA System. Using the MRSA App, our results showed 98.15% sensitivity and 96.69% specificity for the detection of MRSA from anterior nares specimens. The MRSA App, used in conjunction with laboratory automation, provides an opportunity to improve laboratory efficiency by reducing laboratory technologists' labor associated with the review and interpretation of cultures.

Development and evaluation of an artificial intelligence for bacterial growth monitoring in clinical bacteriology.

In clinical bacteriology laboratories, reading and processing of sterile plates remain a significant part of the routine workload (30%-40% of the plates). Here, an algorithm was developed for bacterial growth detection starting with any type of specimens and using the most common media in bacteriology. The growth prediction performance of the algorithm for automatic processing of sterile plates was evaluated not only at 18-24 h and 48 h but also at earlier timepoints toward the development of an early growth monitoring system. A total of 3,844 plates inoculated with representative clinical specimens were used. The plates were imaged 15 times, and two different microbiologists read the images randomly and independently, creating 99,944 human ground truths. The algorithm was able, at 48 h, to discriminate growth from no growth with a sensitivity of 99.80% (five false-negative [FN] plates out of 3,844) and a specificity of 91.97%. At 24 h, sensitivity and specificity reached 99.08% and 93.37%, respectively. Interestingly, during human truth reading, growth was reported as early as 4 h, while at 6 h, half of the positive plates were already showing some growth. In this context, automated early growth monitoring in case of normally sterile samples is envisioned to provide added value to the microbiologists, enabling them to prioritize reading and to communicate early detection of bacterial growth to the clinicians.

Broad-range amplification and sequencing of the rpoB gene: a novel assay for bacterial identification in clinical microbiology.

The rpoB gene has been proposed as a promising phylogenetic marker for bacterial identification, providing theoretically improved species-level resolution compared to the 16S rRNA gene for a range of clinically important taxa. However, its utility in diagnostic microbiology has been limited by the lack of broad-range primers allowing for its amplification from most species with a single PCR assay. Here, we present an assay for broad-range partial amplification and Sanger sequencing of the rpoB gene. To reduce cross-reactivity and allow for rpoB amplification directly from patient samples, primers were based on the dual priming oligonucleotide principle. The resulting amplicon is ~550 base pairs in length and appropriate for species-level identification. Systematic in silico evaluation of a wide selection of taxa demonstrated improved resolution within multiple important genera, including Enterococcus, Fusobacterium, Mycobacterium, Streptococcus, and Staphylococcus species and several genera within the Enterobacteriaceae family. Broad-range rpoB amplification and Sanger sequencing of 115 bacterial isolates provided unambiguous species-level identification for 97 (84%) isolates, as compared to 57 (50%) using a clinical 16S rRNA gene assay. Several unresolved taxonomic matters disguised by the low resolution of the 16S rRNA gene were revealed using the rpoB gene. Using a collection of 33 clinical specimens harboring bacteria and assumed to contain high concentrations of human DNA, the rpoB assay identified the pathogen in 29 specimens (88%). Broad-range rpoB amplification and sequencing provides a promising tool for bacterial identification, improving discrimination between closely related species and making it amenable for use in culture-based and culture-independent diagnostic approaches.

Validation of short culture method for rapid bacterial identification of blood cultures via matrix-assisted laser desorption/ionization time-of-flight mass spectrometry.

BACKGROUND: Development of rapid bacterial identification from blood cultures has been an area of intense study in diagnostic microbiology. Shortened turnaround time coupled with antimicrobial stewardship interventions have been shown to improve patient outcomes and decrease healthcare-associated costs. OBJECTIVES: We report the validation of a short incubation method for Gram-positive and Gram-negative bacterial identification utilizing MALDI-TOF MS without additional instrumentation, processing or cost compared with current practice. METHODS: Prospective, observational, single-centre study in a quaternary care academic hospital encompassing 376 blood cultures subjected to bacterial identification after short incubation periods of 3-4 and 6-8 h. RESULTS: There was 97.5% species-level identification agreement with tests undertaken after 3-4 h incubation with 83.6% isolates identified, and 99.7% species-level identification agreement after 6-8 h incubation with 96.7% isolates identified. CONCLUSIONS: The short incubation method provides a rapid MALDI-TOF MS bacterial identification method, reducing turnaround time by 10-18 h compared with standard practice without additional cost, processing or instrumentation.

Rapid growth rate of Enterobacter sp. SM3 determined using several methods.

BACKGROUND: Bacterial growth rate, commonly reported in terms of doubling time, is frequently determined by one of two techniques: either by measuring optical absorption of a growing culture or by taking samples at different times during their growth phase, diluting them, spreading them on agar plates, incubating them, and counting the colonies that form. Both techniques require measurements of multiple repeats, as well careful assessment of reproducibility and consistency. Existing literature using either technique gives a wide range of growth rate values for even the most extensively studied species of bacteria, such as Escherichia coli, Pseudomonas aeruginosa, and  Staphylococcus aureus. This work aims to apply several methods to reliably determine the growth rate of a recently identified species of Enterobacteriaceae, called Enterobacter sp. SM3, and to compare that rate with that of a well-known wildtype E. coli strain KP437. RESULTS: We extend conventional optical density (OD) measurements to determine the growth rate of Enterobacter sp. SM3. To assess the reliability of this technique, we compare growth rates obtained by fitting the OD data to exponential growth, applying a relative density method, and measuring shifts in OD curves following set factors of dilution. The main source of error in applying the OD technique is due to the reliance on an exponential growth phase with a short span. With proper choice of parameter range, however, we show that these three methods yield consistent results. We also measured the SM3 division rate by counting colony-forming units (CFU) versus time, yielding results consistent with the OD measurements. In lysogeny broth at 37oC, SM3 divides every 21 ± 3 min, notably faster than the RP437 strain of E. coli, which divides every 29 ± 2 min. CONCLUSION: The main conclusion of this report is that conventional optical density (OD) measurements and the colony-forming units (CFU) method can yield consistent values of bacterial growth rate. However, to ensure the reproducibility and reliability of the measured growth rate of each bacterial strain, different methods ought to be applied in close comparison. The effort of checking for consistency among multiple techniques, as we have done in this study, is necessary to avoid reporting variable values of doubling time for particular species or strains of bacteria, as seen in the literature.

Can pre-analytical procedures improve microbiological culture yield in patients with periprosthetic infections?

BACKGROUND: The detection of causative pathogens plays a crucial role in the diagnosis and targeted treatment of periprosthetic joint infections (PJI). While there have been improvements in analytic methods in the past, pre-analytical procedures have not yet been sufficiently investigated. The objective of this study was to compare the culture yield of four different pre-analytical procedures. METHODS: Patients with perioperative diagnosis of PJI were included in a single center cross-sectional study (2021-2022). Tissue samples (n = 20) of each patient were randomly and equally distributed to each of the four study arms. Tissue samples were either send to the laboratory without culture medium (group A) or were transported in thioglycolate medium immediately after sampling at three different temperatures (room temperature, 4 °C, 37° for 24 h; group B-D). Culture media were investigated for growth on days 1, 3, 7, 12, 14. All organisms, the number of positive samples and the time to positivity were recorded and compared between the study arms. Single positive cultures were considered as contamination. RESULTS: In total, 71 patients were included. The proportions of culture negative samples (10-15%) and polymicrobial infections (51-54%) were comparable between the four arms. Seven patients (10%) were culture-negative in group A, but showed growth in thioglycolate media (group B-D). Furthermore, 13% of patients showed growth in all groups, but additional organisms were cultured in thioglycolate. There was growth beyond day 7 of culturing only in thioglycolate, but not in group A. A storage temperature of 4 °C showed a longer time to positivity compared to the other groups (p < 0.001). CONCLUSIONS: Pre-analytical storage of tissue samples in thioglycolate broth did not improve the culture yield and did not detect additional cases of infection compared to the standard (pre-analytical storage in sterile containers). However, including a thioglycolate medium to the sampling algorithm reduced the rate of culture-negative infections and helped to identify additional organisms.

A forced aeration system for microbial culture of multiple shaken vessels suppresses volatilization.

Shake-flask culture, an aerobic submerged culture, has been used in various applications involving cell cultivation. However, it is not designed for forced aeration. Hence, this study aimed to develop a small-scale submerged shaking culture system enabling forced aeration into the medium. A forced aeration control system for multiple vessels allows shaking, suppresses volatilization, and is attachable externally to existing shaking tables. Using a specially developed plug, medium volatilization was reduced to less than 10%, even after 45 h of continuous aeration (~ 60 mL/min of dry air) in a 50 mL working volume. Escherichia coli IFO3301 cultivation with aeration was completed within a shorter period than that without aeration, with a 35% reduction in the time-to-reach maximum bacterial concentration (26.5 g-dry cell/L) and a 1.25-fold increase in maximum concentration. The maximum bacterial concentration achieved with aeration was identical to that obtained using the Erlenmeyer flask, with a 65% reduction in the time required to reach it.

Evaluation of CHROMagar™ B. cepacia agar for the detection of Burkholderia cepacia complex species from sputum samples of patients with cystic fibrosis.

INTRODUCTION: Burkholderia cepacia complex (BCC) are non-fermenting Gram-negative bacteria that can chronically colonize the lungs of people with cystic fibrosis (pwCF), causing a severe and progressive respiratory failure, post-transplant complications and epidemic outbreaks. Therefore, rapid and accurate identification of these bacteria is relevant for pwCF, in order to facilitate early eradication and prevent chronic colonization. However, BCCs are often quite difficult to detect on culture media as they have a slow growth rate and can be hidden by other fast-growing microorganisms, including Pseudomonas aeruginosa and filamentous fungi. MATERIAL AND METHODS: We evaluated the sensitivity of CHROMagar™ B. cepacia agar using 11 isolates from a well-characterized BCC collection, using BCA agar (Oxoid, UK) as a gold standard. We also studied 180 clinical sputum samples to calculate positive (PPV) and negative (NPV) predictive values. Furthermore, we used three of the well-characterized BCC isolates to determine the limit of detection (LOD). RESULTS: Eleven isolates grew on CHROMagar™ B. cepacia at 37ºC after 48 h. The NPV and PPV of CHROMagar™ B. cepacia were 100% and 87.5%, respectively. The LOD of CHROMagar™ B. cepacia was around 1 × 103 CFU/ml, requiring a ten-fold dilution lower bacterial load than BCA for BCC detection. CONCLUSION: CHROMagar™ B. cepacia agar proved to have a very good sensitivity and specificity for the detection of clinical BCCs. Moreover, the chromogenic nature of the medium allowed us to clearly differentiate BCC from other Gram-negative species, filamentous fungi and yeasts, thereby facilitating the identification of contaminants.

Cytomorphological patterns and clinical features of presumptive tubercular lymphadenitis patients and their comparison with bacteriological detection methods: a cross-sectional study.

INTRODUCTION: Tuberculous lymphadenitis (TBLN) is an infection of the lymph node caused by Mycobacterium tuberculosis. Histological diagnoses of presumptive patients are often accompanied by cytomorphological features. However, the sensitivities of these features are often precluded by the variable degrees of narrative similarities compared to other diagnostic modalities. OBJECTIVE: The aim of this study was to investigate and compare the cytomorphological and clinical features of presumptive TBLN patients with bacteriological detection methods. METHODS: A similar cohort of TBLN patients from our previous study who were enrolled prospectively from the ALERT Specialized Hospital, Addis Ababa, Ethiopia, was considered for this analysis. SPSS version 26 was used for data analysis. Descriptive analysis was conducted to characterize the study population using the independent variable and presented with frequency tables. The chi-square test was used to measure the association. A P-value of < 0.05 was considered statistically significant. RESULTS: Using FNAC, 60/126 (47.6%) of the participants were reported to have features consistent with TB. Of the total FNAC-positive cases, many (30/60 and 27/60) showed pattern B (caseous necrosis only) and pattern C (epithelioid granuloma with caseous necrosis), respectively. Strong concordance was observed in Pattern A (abundant caseous necrosis with few epithelioid macrophages) followed by patterns B and C with GeneXpert and MGIT culture (P value < 0.001). Night sweats and alcohol intake were shown to correlate with positive cases as reported by FNAC (P value = 0.008 respectively), GeneXpert (P value = 0.02 & 0.001), and culture methods (P-value = < 0.001 & 0.002). CONCLUSION: Cytomorphological features, particularly patterns A, B, and C, could be considered in the diagnosis of TBLN given their comparable outcomes with bacteriological detection methods. On another note, we recommend that due care and attention be given when treating TBLN patients based solely on clinical presentation, as these diagnostics may be prone to false results, leading to inappropriate administration of anti-TB drugs and other consequences.

Two protocols for the detection of oleaginous bacteria using Oil Red O.

The selection of oleaginous bacteria, potentially applicable to biotechnological approaches, is usually carried out by different expensive and time-consuming techniques. In this study, we used Oil Red O (ORO) as an useful dye for staining of neutral lipids (triacylglycerols and wax esters) on thin-layer chromatography plates. ORO could detect minimal quantities of both compounds (detection limit, 0.0025 mg of tripalmitin or 0.005 mg of cetylpalmitate). In addition, we developed a specific, rapid, and inexpensive screening methodology to detect triacylglycerol-accumulating microorganisms grown on the agar plate. This staining methodology detected 9/13 strains with a triacylglycerol content higher than 20% by cellular dry weight. ORO did not stain polyhydroxyalkanoates-producing bacteria. The four oleaginous strains not detected by this screening methodology exhibited a mucoid morphology of their colonies. Apparently, an extracellular polymeric substance produced by these strains hampered the entry of the lipophilic dye into cells. The utilization of the developed screening methodology would allow selecting of oleaginous bacteria in a simpler and faster way than techniques usually used nowadays, based on unspecific staining protocols and spectrophotometric or chromatographic methods. Furthermore, the use of ORO as a staining reagent would easily characterize the neutral lipids accumulated by microorganisms as reserve compounds. KEY POINTS: • Oil Red O staining is specific for triacylglycerols • Oil Red O staining is useful to detect oleaginous bacteria • Fast and inexpensive staining to isolate oleaginous bacteria from the environment.

Validation of rapid detection methods for Salmonella enterica in green chile.

The objective of this study is to validate the US Food and Drug Administration (FDA) rea-time polymerase chain reaction (qPCR) assay, the Neogen Amplified Nucleic Single Temperature Reaction (ANSR) assay, and the Vitek ImmunoDiagnostic Assay System (VIDAS) SLM procedure against the FDA cultural procedure for Salmonella detection in green chile pepper. Green chile was artificially contaminated with Salmonella according to the FDA guidelines (FDA. Guidelines for the Validation of Microbiological Methods for the FDA Foods Program, 3rd Edition. 2019. www.fda.gov/media/83812/download?attachment (17 March 2024, date last accessed)) at a fractional recovery level (where 50%-25% tests positive and at a level +1 log greater for each organism tested). Enriched samples were tested directly by the ANSR Salmonella test and by qPCR, and were subcultured into Rappaport-Vassiliadis and tetrathionate brilliant green broth for cultural detection and qPCR. For the VIDAS-SLM assay, the selective enrichments were further cultured in M broth before testing. Presumptive salmonellae were confirmed with biochemical tests, serology, and qPCR. All three rapid assays were compared favorably with the FDA-BAM (Bacteriological Analytical Manual) method. No significant differences at P < .05 were found between the procedures using McNemar's χ2 test. The three procedures were found to be rapid and reliable alternatives to cultural detection of Salmonella enterica in green chile.

Edge current and pairing order transition in chiral bacterial vortices.

Bacterial suspensions show turbulence-like spatiotemporal dynamics and vortices moving irregularly inside the suspensions. Understanding these ordered vortices is an ongoing challenge in active matter physics, and their application to the control of autonomous material transport will provide significant development in microfluidics. Despite the extensive studies, one of the key aspects of bacterial propulsion has remained elusive: The motion of bacteria is chiral, i.e., it breaks mirror symmetry. Therefore, the mechanism of control of macroscopic active turbulence by microscopic chirality is still poorly understood. Here, we report the selective stabilization of chiral rotational direction of bacterial vortices in achiral circular microwells sealed by an oil/water interface. The intrinsic chirality of bacterial swimming near the top and bottom interfaces generates chiral collective motions of bacteria at the lateral boundary of the microwell that are opposite in directions. These edge currents grow stronger as bacterial density increases, and, within different top and bottom interfaces, their competition leads to a global rotation of the bacterial suspension in a favored direction, breaking the mirror symmetry of the system. We further demonstrate that chiral edge current favors corotational configurations of interacting vortices, enhancing their ordering. The intrinsic chirality of bacteria is a key feature of the pairing order transition from active turbulence, and the geometric rule of pairing order transition may shed light on the strategy for designing chiral active matter.

Biphasic Rapid Culture in Differential Diagnosis of Tuberculosis.

Context: Early intervention and treatment are key measures for tuberculosis (TB) prevention and control, making early, rapid, and accurate diagnostic methods crucial. The Liquid-solid (Biphasic) rapid cultures is a novel tool for the differential diagnosis of tuberculosis. Objective: The study intended to evaluate the value of the biphasic cultures by comparing it to the acid-fast staining and liquid cultures, which have been the traditional gold-standard technology, to determine its value in the diagnosis of TB. Design: The research team conducted an experimental study. Setting: The study took place at the Affiliated Wuxi Fifth Hospital of Jiangnan University in Wuxi, China. Participants: Participants were 221 patients with suspected pulmonary tuberculosis who had been admitted to the hospital between July 2020 and December 2021. Outcome Measures: Using three methods-liquid-solid (biphasic) culture, acid-fast staining, and mycobacterial growth indicator tube (MGIT) 960 liquid culture, the research team tested participants' sputum samples: (1) for sensitivity; (2) for time to positive culture results, and (3) for differential diagnosis. Results: The biphasic culture's sensitivity was significantly higher than that of acid-fast staining, (P = .0003), and no significant difference existed between it and the MGIT 960 liquid cultures. The biphasic cultures's mean time to positivity was significantly shorter than that of the MGIT 960 liquid culture at the intervals 11-20 d (P < .0001) and 21-35 days (P = .0001). Moreover, the biphasic cultures could preliminarily differentiate nontuberculous mycobacteria (NTM) from mycobacterium tuberculosis (MTB), which is a significant advantage in tuberculosis diagnosis. Conclusions: This study highlights the potential of a biphasic culture as a reliable tool for the rapid differential diagnosis of tuberculosis, with a faster detection cycle and a higher sensitivity than conventional methods. The biphasic cultures is a valuable addition to the tuberculosis diagnostic armamentarium and can help improve patients' outcomes by enabling earlier diagnosis and treatments.

Evaluation of a Novel Benchtop Tool for Acceleration of Sample Preparation for MALDI-TOF Mass Spectrometry.

During the past decade, MALDI-TOF mass spectrometry (MS) has become a standard method for identification of bacteria and yeasts. Nonetheless, further optimization of the identification process is important to streamline workflows and save resources. This study evaluated the application of a multipurpose benchtop tool, MBT FAST Shuttle IVD, for accelerated drying of liquid assay components (matrix, formic acid, and/or sample) on a MALDI target. A total of 50 bacterial and fungal isolates were subjected to three different sample preparation procedures prior to the identification by MALDI-TOF MS: direct transfer (DT), extended direct transfer (eDT), and protein extraction (PE). Compared to conventional drying at room temperature, the preparation was performed with standardized heating of the MALDI target on the MBT FAST Shuttle. During DT, eDT, and PE, 56.7% (P < 0.001), 56.8% (P < 0.001), and 52.8% (P < 0.001) of time for matrix drying were saved by using the MBT FAST Shuttle, respectively. Applying the MBT FAST Shuttle, 57.5% (P < 0.001) of time for drying of formic acid were saved for eDT and 57.5% (P < 0.001) of time for sample drying were saved for PE. A significant improvement of the identification rates and scores was observed with MBT FAST Shuttle for eDT (P = 0.001) and PE (P = 0.008) methods, while the effect on identification quality for DT was not statistically significant (P = 0.16). In conclusion, the use of the MBT FAST Shuttle shortened the drying time of assay components by about a half for all preparation methods. Moreover, positive effect on identification success was observed.

Evaluation of a new rapid immunochromatographic assay for the detection of GES-producing Gram-negative bacteria.

BACKGROUND: As carbapenemase-producing Enterobacterales are increasingly reported worldwide, their rapid detection is crucial to reduce their spread and prevent infections and outbreaks. Lateral flow immunoassays (LFIAs) have become major tools for the detection of carbapenemases. However, as for most commercially available assays, only the five main carbapenemases are targeted. OBJECTIVES: Here, we have developed and evaluated an LFIA prototype for the rapid and reliable detection of the increasingly identified GES-type ß-lactamases. METHODS: The GES LFIA was validated on 103 well-characterized Gram-negative isolates expressing various ß-lactamases grown on Mueller-Hinton (MH) agar, chromogenic, and chromogenic/selective media. RESULTS: The limit of detection of the assay was 106 cfu per test with bacteria grown on MH agar plates. GES LFIA accurately detected GES-type ß-lactamases irrespective of the culture media and the bacterial host. The GES LFIA was not able to distinguish between GES-ESBLs and GES-carbapenemases. Because GES enzymes are still rare, their detection as an ESBL or a carbapenemase remains important, especially because extensive use of carbapenems to treat ESBL infections may select for GES variants capable of hydrolysing carbapenems. CONCLUSIONS: The GES LFIA is efficient, rapid and easy to implement in the routine workflow of a clinical microbiology laboratory for the confirmation of GES-type ß-lactamases. Combining it with immunochromatographic assays targeting the five main carbapenemases (KPC, NDM, VIM, IMP and OXA-48) would improve the overall sensitivity for the most frequently encountered carbapenemases and ESBLs, especially in non-fermenters.