Removal of micropollutants from municipal wastewater using different types of activated carbons.
J Environ Manage
; 278(Pt 2): 111302, 2021 Jan 15.
Article
en En
| MEDLINE
| ID: mdl-33152547
ABSTRACT
The water reservoirs are getting polluted due to increasing amounts of micropollutants such as pharmaceuticals, organic polymers and suspended solids. Powdered activated carbon (PAC) has been proved to be a promising solution for the purification of water without having harmful impacts on the environment. Parameters such as PAC dosing, wastewater hardness, the effect of coagulant and flocculant were evaluated in a batch scale study. These parameters were further applied on a pilot plant scale for the performance evaluation of PAC based removal of micropollutants concerning the contact time and PAC dosing with main focus on recirculation of PAC sludge. The obtained optimum dose was 10-20â¯mg/L providing 84.40-91.30% removal efficiency of suspended solid micropollutants (MPs) and this efficiency increased to 88.90-93.00% along with coagulant which further raised by the addition of polymer and recirculation process at batch scale. On pilot plant scale, the concentration in contact reactor and PAC removal effectiveness of dissolved air flotation, lamella separator and sedimentation tank were compared. Constant optimisation resulted in a concentration ranging from 2.70 to 3.40â¯g/L at dosing of PAC 10â¯mg/L, coagulant 2.00â¯mg/L and polymer 0.50â¯mg/L. PAC doses of 10-20â¯mg/L with 15-30â¯min contact time proved best for above 70-80% elimination. The recirculation system has also proved an efficient technique because the PAC's adsorption capacity was practically completely used. Small PAC dosages yielded high micropollutants elimination.
Palabras clave
Texto completo:
1
Colección:
01-internacional
Banco de datos:
MEDLINE
Asunto principal:
Contaminantes Químicos del Agua
/
Purificación del Agua
Idioma:
En
Revista:
J Environ Manage
Año:
2021
Tipo del documento:
Article