Characterization of commercial thermoelectric modules for precision heat flux measurement.

ABSTRACT

In this article, we present a cost-effective approach to the precision measurement of heat flux using commercial thermoelectric modules (TEMs). Two different methods of measuring heat flux with TEMs are investigated, namely, passive mode based on the Seebeck effect and active mode based on the Peltier effect. For both modes, a TEM as a heat flux meter is calibrated to show a linear relation between the voltage across the TEM and the heat flux from 0 to ∼450 W m-2. While both modes exhibit sufficiently high sensitivities suitable for low heat flux measurement, active mode is shown to be ∼7 times more sensitive than passive mode. From the speculation on the origin of the measurement uncertainty, we propose a dual TEM scheme by operating the top TEM in passive mode while its bottom temperature maintains constant by the feedback-controlled bottom TEM. The dual TEM scheme can suppress the sensitivity uncertainty up to 3 times when compared to the single-TEM passive mode by stabilizing the bottom temperature. The response time of a 15 × 15 mm2 TEM is measured to be 8.9 ± 1.0 s for heating and 10.8 ± 0.7 s for cooling, which is slower than commercial heat flux meters but still fast enough to measure heat flux with a time resolution on the order of 10 s. We believe that the obtained results can facilitate the use of a commercial TEM for heat flux measurement in various thermal experiments.