Optical Tunneling Mediated Sub-Skin-Depth High Emissivity Tungsten Radiators.

Tailoring the spectrum of thermal radiation at high temperatures is a central issue in the study of thermal radiation harnessed energy resources. Although bulk metals with periodic cavities incorporated into their surfaces provide high emissivity, they require a complicated micron metal etch, thereby precluding reliable, continuous operation. Here, we report thermally stable, highly emissive, ultrathin (<20 nm) tungsten (W) radiators that were prepared in a scalable and cost-effective route. Alumina/W/alumina multiwalled, submicron cavity arrays were fabricated sequentially using nanoimprinting lithography, thin film deposition, and calcination processes. To highlight the practical importance of high-temperature radiators, we developed a thermophotovoltaic (TPV) system equipped with fabricated W radiators and low-bandgap GaSb photovoltaic cells. The TPV system produced electric power reliably during repeated temperature cycling between 500 and 1200 K; the power density at 1200 K was fixed to be approximately 1.0 W/cm2. The temperature-dependent electric power was quantitatively reproduced using a one-dimensional energy conversion model. The symmetric configuration of alumina/W/alumina multiwall together with the presence of a void inside each cavity alleviated thermal stress, which was responsible for the stable TPV performance. The short-current-density (JSC) of developed TPV system was augmented significantly by decreasing the W thickness below its skin depth. A 17 nm thick W radiator yielded a 32% enhancement in JSC compared to a 123 nm thick W radiator. Electromagnetic analysis indicated that subskin-depth W cavity arrays led to suppressed surface reflection due to the mitigated screening effect of free electrons, thereby enhancing the absorption of light within each W wall. Such optical tunneling-mediated absorption or radiation was valid for any metal material and morphology (e.g., planar or patterned).