First derivative synchronous spectrofluorimetric method for the simultaneous determination of tramadol and celecoxib in their dosage forms and human plasma.

One of the most common features of many different clinical conditions is pain; hence, there is a crucial need for eliminating or reducing it to a tolerable level to retrieve physical, psychological and social functioning. A first derivative synchronous spectrofluorimetry technique is proposed for the simultaneous determination of celecoxib and tramadol HCl, a recent coformulation authorized for treating acute pain in adults. The method includes using synchronous spectrofluorimetry at ∆λ = 80 nm where tramadol HCl was determined using first derivative technique at λ = 230.2 nm, while celecoxib was determined at λ = 288.24 nm. The proposed method was successfully applied to their co-formulated dosage forms in addition to spiked human plasma and validated in agreement with the guidelines of the International Council for Harmonization of Technical Requirements for Pharmaceuticals for Human Use (ICH). The linear ranges were found to be 0.50-5.0 and 0.15-0.50, the limits of detection to be 0.088 and 0.011 and the limits of quantification to be 0.266 and 0.032 µg/ml for celecoxib and tramadol, respectively. Statistical analysis revealed no significant difference when compared with previously reported methods as evidenced by the values of the variance ratio F-test and Student t-test. The proposed method was successfully applied to commercial dosage forms and spiked human samples. Moreover, the greenness of the proposed method was investigated based on the analytical eco-scale approach, with the results showing an excellent green scale with a score of 95.

Greenness-by-design approach for developing novel UV spectrophotometric methodologies resolving a quaternary overlapping mixture.

Greenness-by-design (GbD) is an approach that integrates green chemistry principles into the method development stage of analytical processes, aiming to reduce their environmental impact. In this work, we applied GbD to a novel univariate double divisor corrected amplitude (DDCA) method that can resolve a quaternary pharmaceutical mixture in a fixed-dose polypill product. We also used a genetic algorithm as a chemometric modeling technique to select the informative variables for the analysis of the overlapping mixture. This resulted in more accurate and efficient predictive models. We used a computational approach to study the effect of solvents on the spectral resolution of the mixture and to minimize the spectral interferences caused by the solvent, thus achieving spectral resolution with minimal analytical effort and ecological footprint. The validated methods showed wide linear concentration ranges for the four components (1-30 µg/mL for losartan, 2.5-30 µg/mL for atorvastatin and aspirin, and 2.5-35 µg/mL for atenolol) and achieved high scores on the hexagon and spider charts, demonstrating their eco-friendliness.

Analysis of Terpenes in Cannabis sativa L. Using GC/MS: Method Development, Validation, and Application.

Terpenes are the major components of the essential oils present in various Cannabis sativa L. varieties. These compounds are responsible for the distinctive aromas and flavors. Besides the quantification of the cannabinoids, determination of the terpenes in C. sativa strains could be of importance for the plant selection process. At the University of Mississippi, a GC-MS method has been developed and validated for the quantification of terpenes in cannabis plant material, viz., α-pinene, ß-pinene, ß-myrcene, limonene, terpinolene, linalool, α-terpineol, ß-caryophyllene, α-humulene, and caryophyllene oxide. The method was optimized and fully validated according to AOAC (Association of Official Analytical Chemists) guidelines against reference standards of selected terpenes. Samples were prepared by extraction of the plant material with ethyl acetate containing n-tridecane solution (100 µg/mL) as the internal standard. The concentration-response relationship for all analyzed terpenes using the developed method was linear with r2 values > 0.99. The average recoveries for all terpenes in spiked indoor cultivated samples were between 95.0 - 105.7%, with the exception of terpinolene (67 - 70%). The measured repeatability and intermediate precisions (% relative standard deviation) in all varieties ranged from 0.32 to 8.47%. The limit of detection and limit of quantitation for all targeted terpenes were determined to be 0.25 and 0.75 µg/mL, respectively. The proposed method is highly selective, reliable, and accurate and has been applied to the simultaneous determination of these major terpenes in the C. sativa biomass produced by our facility at the University of Mississippi as well as in confiscated marijuana samples.

Determination of Acid and Neutral Cannabinoids in Extracts of Different Strains of Cannabis sativa Using GC-FID.

Cannabis (Cannabis sativa L.) is an annual herbaceous plant that belongs to the family Cannabaceae. Trans-Δ9-tetrahydrocannabinol (Δ9-THC) and cannabidiol (CBD) are the two major phytocannabinoids accounting for over 40% of the cannabis plant extracts, depending on the variety. At the University of Mississippi, different strains of C. sativa, with different concentration ratios of CBD and Δ9-THC, have been tissue cultured via micropropagation and cultivated. A GC-FID method has been developed and validated for the qualitative and quantitative analysis of acid and neutral cannabinoids in C. sativa extracts. The method involves trimethyl silyl derivatization of the extracts. These cannabinoids include tetrahydrocannabivarian, CBD, cannabichromene, trans-Δ8-tetrahydrocannabinol, Δ9-THC, cannabigerol, cannabinol, cannabidiolic acid, cannabigerolic acid, and Δ9-tetrahydrocannabinolic acid-A. The concentration-response relationship of the method indicated a linear relationship between the concentration and peak area ratio with R2 > 0.999 for all 10 cannabinoids. The precision and accuracy of the method were found to be ≤ 15% and ± 5%, respectively. The limit of detection range was 0.11 - 0.19 µg/mL, and the limit of quantitation was 0.34 - 0.56 µg/mL for all 10 cannabinoids. The developed method is simple, sensitive, reproducible, and suitable for the detection and quantitation of acidic and neutral cannabinoids in different extracts of cannabis varieties. The method was applied to the analysis of these cannabinoids in different parts of the micropropagated cannabis plants (buds, leaves, roots, and stems).

Comparison between Two Linear Supervised Learning Machines' Methods with Principle Component Based Methods for the Spectrofluorimetric Determination of Agomelatine and Its Degradants.

Four accurate, sensitive and reliable stability indicating chemometric methods were developed for the quantitative determination of Agomelatine (AGM) whether in pure form or in pharmaceutical formulations. Two supervised learning machines' methods; linear artificial neural networks (PC-linANN) preceded by principle component analysis and linear support vector regression (linSVR), were compared with two principle component based methods; principle component regression (PCR) as well as partial least squares (PLS) for the spectrofluorimetric determination of AGM and its degradants. The results showed the benefits behind using linear learning machines' methods and the inherent merits of their algorithms in handling overlapped noisy spectral data especially during the challenging determination of AGM alkaline and acidic degradants (DG1 and DG2). Relative mean squared error of prediction (RMSEP) for the proposed models in the determination of AGM were 1.68, 1.72, 0.68 and 0.22 for PCR, PLS, SVR and PC-linANN; respectively. The results showed the superiority of supervised learning machines' methods over principle component based methods. Besides, the results suggested that linANN is the method of choice for determination of components in low amounts with similar overlapped spectra and narrow linearity range. Comparison between the proposed chemometric models and a reported HPLC method revealed the comparable performance and quantification power of the proposed models.

Optimization of a Solid-Phase Extraction Coupled with a High-Performance Liquid Chromatography and Diode Array Ultraviolet Detection Method for Monitoring of Different Antibiotic Class Residues in Water Samples.

BACKGROUND: The increased use of cephalosporin antibiotics in the last few years as well as the detection of their residues in wastewater treatment plants and hospital wastewater poses a risk for infiltration of their residues into environmental water samples. OBJECTIVE: A simplified, sensitive, and convenient solid-phase extraction (SPE) procedure coupled with either HPLC or fast HPLC methods with diode array detection was developed and validated to screen the residues of six different cephalosporin antibiotics: cefoperazone, cefipime, ceftazedime, ceftriaxone, cefdinir, and cefotaxime, along with amoxicillin, levofloxacin, and ciprofloxacin in water samples. METHODS: An HPLC-diode array detector (HPLC-DAD) method and a fast HPLC method, based on a core-shell stationary phase, were developed for the fast screening of the antibiotic compounds. In addition, the SPE step was optimized to enable the extraction of the studied drugs with high accuracy of the recovered amounts of residues. RESULTS: The method sensitivity was enhanced by the coupling of SPE with HPLC-DAD and fast HPLC to achieve low LODs; from 0.2 to 3.8 ng/mL and from 0.65 to 12.2 ng/mL, respectively. The developed methods were augmented by LC-MS/MS determination for confirmation of identity and quantity of any positively identified sample. The method was applied to the analysis of water samples collected from a rural site. In Addition, an example application of cleaning validation of cefotaxime-contaminated stainless-steel surfaces was provided. CONCLUSION: The method's simplicity and high sensitivity encourage its application in monitoring of antibiotic residues in different types of water samples such as environmental samples and samples from cleaning validation activities. HIGHLIGHTS: HPLC-DAD and fast HPLC methods were developed for separation of nine different antibiotics. The combination with the SPE procedure achieved low detection limits; from 0.2 to 3.8 ng/mL for SPE-HPLC-DAD and from 0.65 to 12.2 ng/mL for SPE-fast HPLC.

Eco-Friendly UV-Spectrophotometric Methods Employing Magnetic Nano-Composite Polymer for the Extraction and Analysis of Sexual Boosters in Adulterated Food Products: Application of Computer-Aided Design.

BACKGROUND: Solid phase extraction (SPE) techniques, based on computationally designed magnetic-based multi-targeting molecular imprinted polymer (MT-MIP), combined with UV spectrophotometric approaches provide advantages in the examination of counterfeit samples. OBJECTIVE: The current work describes an innovative and sustainable methodology for the simultaneous determination of tadalafil (TAD) and dapoxetine hydrochloride (DAP) in aphrodisiac counterfeit products (honey and instant coffee) utilizing SPE exploiting MT-MIP. Additionally, an innovative UV spectrophotometric method capable of resolving TAD in its pharmaceutical binary mixtures with DAP was developed. A novel computational approach was implemented to tailor the synthesis and design of the MT-MIP particles. METHODS: We applied a newly developed UV spectrophotometric method which was based on a Fourier self-deconvolution (FSD) method coupled with the isoabsorptive point for determination of TAD and DAP in pharmaceutical dosage form. We also applied an SPE process based on MT-MIP designed particles, assisting in the analysis of both drugs in counterfeit food samples. The SPE process and the UV spectroscopic methodology were assessed regarding their greenness using the pioneering green analytical procedure index (GAPI), analytical greeness including sample preparation (AGREEprep) and AGREE tools. The synthesized MT-MIP particles were characterized by scanning electron microscopy and energy-dispersive x-ray spectroscopy. RESULTS: The suggested spectrophotometric methods revealed a wide linear concentration range of 2-50 µg/mL with lower LODs in the range of 0.604-0.994 µg/mL. Additionally, the suggested method demonstrated the utmost sensitivity and eco-friendliness for their target in its mixed dosage form and counterfeit food products. CONCLUSION: The SPE process and the developed analytical UV spectroscopic methodology were validated as per the ICH guidelines, and were found to be suitable for overseeing some counterfeiting activities in commercially available honey and instant coffee aphrodisiac products. HIGHLIGHTS: An SPE method based on MT-MIP magnetic-based polymer and a UV spectroscopic method were successfully developed for analysis of TAD and DAP in different matrices.

Quantitative Determination of Cannabis Terpenes Using Gas Chromatography-Flame Ionization Detector.

Background: Cannabis has a long history of being credited with centuries of healing powers for millennia. The cannabis plant is a rich source of cannabinoids and terpenes. Each cannabis chemovar exhibits a different flavor and aroma, which are determined by its terpene content. Methods: In this study, a gas chromatography-flame ionization detector method was developed and validated for the determination of the 10 major terpenes in the main three chemovars of Cannabis sativa L. with n-tridecane used as the internal standard following the standard addition method. The 10 major terpenes (monoterpenes and sesquiterpenes) are α-pinene, ß-pinene, ß-myrcene, limonene, terpinolene, linalool, α-terpineol, ß-caryophyllene, α-humulene, and caryophyllene oxide. The method was validated according to Association of Official Analytical Chemists guidelines. Spike recovery studies for all terpenes were carried out on placebo cannabis material and indoor-growing high THC chemovar with authentic standards. Results: The method was linear over the calibration range of 1-100 µg/mL with r2>0.99 for all terpenes. The limit of detection and limit of quantification were calculated to be 0.3 and 1.0 µg/mL, respectively, for all terpenes. The accuracy (%recovery) at all levels ranged from 89% to 104% and 90% to 111% for placebo and indoor-growing high THC chemovar, respectively. The repeatability and intermediate precision of the method were evaluated by the quantification of target terpenes in the three different C. sativa chemovars, resulting in acceptable relative standard deviations (less than 10%). Conclusions: The developed method is simple, sensitive, reproducible, and suitable for the detection and quantification of monoterpenes and sesquiterpenes in C. sativa biomass.

A nanocomposite of silica coated magnetite nanoparticles and aniline-anthranilic acid co-polymeric nanorods with improved stability and selectivity for fluoroquinolones dispersive micro solid phase extraction.

Adsorbents composed of polyaniline nanostructures or their derivatives immobilized on magnetic nanoparticles had gained increasing interest for application in dispersive micro-solid phase extraction. However, reproducible binding between polymeric PANI nanopaterials and magnetic nanomaterials are still a challenging task. Furthermore, other challenges are the enhancement of physical and chemical stability of adsorbent magnetic nanoparticles as well as improvement of polymeric PANI nanoparticles selectivity towards target analytes. This work described the reproducible preparation of a nanocomposite of aniline-anthranilic acid co-polymeric nanorods with silica coated magnetite nanoparticles by physical mixing of its basic components. The prepared nanocomposite had proven stability against chemical and atmospheric attack. The formed nanocomposite in this work had advantages regarding stability and selectivity towards fluoroquinolones as compared with analogues prepared from polyaniline polymers and/or uncoated magnetite nanoparticles. The selectivity of the formed adsorbent was further optimized for microextraction of four fluoroquinolone antibacterial agents. The application of the prepared nanocomposite was exemplified in microextraction of the studied fluoroquinolones from spiked milk samples to enable their detection down to their stated maximum residue limits.

HPLC-UV and UPLC-MS/MS methods for the simultaneous analysis of sildenafil, vardenafil, and tadalafil and their counterfeits dapoxetine, paroxetine, citalopram, tramadol, and yohimbine in aphrodisiac products.

In recent times, the counterfeiting of pharmaceuticals has been considered a serious trouble especially in developing countries that acquire poor inspection programs. Sildenafil, vardenafil and tadalafil (phosphodiesterase type 5 inhibitors) products have gained wide popularity in treating sexual disorders, for which they are subjected to counterfeiting. For this purpose, a simple, rapid, and novel HPLC method with ultraviolet detection has been simply developed for the simultaneous determination of vardenafil, sildenafil, and tadalafil, and their counterfeits (dapoxetine, paroxetine, citalopram, tramadol and yohimbine) in pharmaceutical dosage forms and counterfeit products such as instant coffee and honey. The separation was carried out on a C18 column, with acetonitrile and an aqueous 0.05% formic acid solution as the mobile phase with a gradient program and at a flow rate of 1 mL min-1. UV detection was accurately set at 230 nm. The total run time was 11 min for elution of these eight drugs. A UPLC-MS/MS method was also developed, by which compounds were separated in only 6 min, and it was used as a confirmatory tool for studied compounds by identification of their mass spectra. Proposed methods were validated by following ICH guidelines. Both methods were found to be linear, specific, precise and accurate, and they were efficiently applied to analyze 50 commercial products including honey sachets, instant coffee and pharmaceutical products marketed as aphrodisiacs and suspected to contain PDE5-inhibitors.

Stability study of thymoquinone, carvacrol and thymol using HPLC-UV and LC-ESI-MS.

The aim of this study was to investigate the stability of three major antioxidants of Nigella sativa: thymoquinone (TQ), carvacrol (CR) and thymol (THY), under different stress conditions using HPLC and LC-MS/MS. Forced degradation for each compound was performed under different conditions, including oxidation, hydrolysis, photolysis and thermal decomposition. The results showed that both CR and THY were stable under the studied conditions, whereas TQ was not affected by acidic, basic and oxidative forced conditions but the effect of light and heat was significant. The degradation products of TQ were further investigated and characterized by LC-MS/MS. HPLC-UV method has been fully validated in terms of linearity and range, the limit of detection and quantitation, precision, selectivity, accuracy and robustness. The method was successfully applied to quantitative analysis of the principal antioxidants of Nigella sativa TQ, CR and THY in different phytopharmaceuticals.

Tolerance intervals modeling for design space of a salt assisted liquid-liquid microextraction of trimethoprim and six common sulfonamide antibiotics in environmental water samples.

Sulfonamides and trimethoprim combinations have been used extensively as antimicrobial agents for prevention and treatment of human and animal infections. Although many microextraction methods were developed for monitoring their residues in environmental water, none of these methods applied liquid-liquid microextraction for this purpose. This work presents for the first time a simultaneous Salt Assisted Liquid-Liquid Microextraction SALLME coupled with HPLC-UV for determination of trimethoprim and six common sulfonamide residues (sulfathiazole, sulfadiazine, sulfadmidine, sulfamethoxazole sulfadoxine and sulfaquinoxaline) in water samples. Co-extraction of trimethoprim with sulfonamides was achieved by the addition of perchloric acid as a chaotropic agent to the extraction medium. Quality by Design framework was applied to develop and optimize both of SALLME and HPLC steps to ensure procedure robustness and sensitivity. Tolerance interval modeling of SALLME responses was applied to construct the design space of SALLME procedure. The optimized HPLC system enabled fast, sensitive and robust separation the extracted compounds within four minutes. The method detection limits of the method were in the range of 2.15-7.64 ng.mL-1. These values were far below the guidelines recommended limits (35 and 70 ng.mL-1 for each individual sulfonamide and trimethoprim respectively).

Applications of Fourier transform infrared spectroscopic method for simultaneous quantitation of some hypoglycemic drugs in their binary mixtures.

Cost-effective, green, simple and reliable transmission Fourier-transform infrared (FTIR) spectroscopic method was developed for simultaneous analysis of hypoglycemic drugs in their binary mixtures for the first time. The FTIR method was applied for the determination of vildagliptin (VILD), glimepiride (GLIM) and pioglitazone (PIOG) in binary mixture with metformin (METF). The method was validated according to the International Conference on Harmonization (ICH) guidelines. The obtained results (expressed in peak areas) are linear with concentration in the range of 0.61-20, 0.26-24 and 0.37-4 µg/mg for VILD, PIOG and GLIM, respectively while the linearity ranges for METF were 0.40-200, 0.26-800 and 0.19-1000 µg/mg with VILD, PIOG and GLIM, respectively. The limits of detection (LODs) were 0.20, 0.08 and 0.12 µg/mg for VILD, PIOG and GLIM, respectively while METF LODs were 0.13, 0.08 and 0.06 µg/mg with VILD, PIOG and GLIM, respectively. The FTIR method has been successfully applied for the determination of the cited binary mixtures in its pharmaceutical tablets and the obtained results showed satisfactory % recovery.

HPLC method for the simultaneous determination of atenolol and chlorthalidone in human breast milk.

A high-performance liquid chromatographic method was optimized and validated for the determination of atenolol and chlorthalidone (CT) in human breast milk. The milk samples were extracted and purified using ACN and phosphoric acid for precipitation of proteins followed by removal of ACN and milk fats by extraction with methylene chloride. The samples were applied, after an extraction procedure, to a cyanide column using a mobile phase consisting of ACN/water (35:65 v/v) and buffered at pH 4.0 with flow rate of 1.0 mL/min. Quantitation was achieved with UV detection at 225 nm using guaifenesin as the internal standard. The effectiveness of protein precipitation and clean up procedure were investigated. The method was validated over the range of 0.3-20 microg/mL for atenolol and 0.25-5 microg/mL for CT.

High-performance liquid chromatographic determination of flavoxate hydrochloride and its hydrolysis product.

Liquid chromatographic method was presented for the determination of flavoxate hydrochloride (FX) and its hydrolysis product. The method was based on high-performance liquid chromatographic (HPLC) separation of FX from its hydrolysis product on CN column using a mobile phase consisting of acetonitrile-12 mM ammonium acetate (45:55, vol/vol, pH 4.0) with UV detection at 220 nm and flow rate of 1.5 mL min(-1). The proposed HPLC method for the determination of FX was utilized to investigate the kinetics of acidic hydrolytic process at different temperatures and to calculate its activation energy. In addition, the proposed HPLC method was used for pH-rate profile study of hydrolysis of FX in Britton-Robinson buffer solutions. The 3-methylflavone-8-carboxylic acid ethyl ester, as impurity of flavoxate hydrochloride, can be separated by the proposed HPLC method.

High performance liquid chromatographic determination of 3-methylflavone-8-carboxylic acid, the main active metabolite of flavoxate hydrochloride in human urine.

High performance liquid chromatographic (HPLC) method was presented for the determination of 3-methylflavone-8-carboxylic acid as the main active metabolite of flavoxate hydrochloride (FX) in human urine. The proposed method was based on using CN column with mobile phase consisting of acetonitrile-12 mM ammonium acetate (40:60, v/v) and adjusted to apparent pH 4.0 with flow rate of 1.5 ml min(-1). Quantitation was achieved with UV detection at 220 nm. The proposed method was utilized to the determination of dissolution rate for tablets containing flavoxate hydrochloride. The urinary excretion pattern has been calculated using the proposed method.

Development and Optimization of HPLC Analysis of Metronidazole, Diloxanide, Spiramycin and Cliquinol in Pharmaceutical Dosage Forms Using Experimental Design.

A new simple, sensitive, rapid and accurate gradient reversed-phase high-performance liquid chromatography with photodiode array detector (RP-HPLC-DAD) was developed and validated for simultaneous analysis of Metronidazole (MNZ), Spiramycin (SPY), Diloxanidefuroate (DIX) and Cliquinol (CLQ) using statistical experimental design. Initially, a resolution V fractional factorial design was used in order to screen five independent factors: the column temperature (°C), pH, phosphate buffer concentration (mM), flow rate (ml/min) and the initial fraction of mobile phase B (%). pH, flow rate and initial fraction of mobile phase B were identified as significant, using analysis of variance. The optimum conditions of separation determined with the aid of central composite design were: (1) initial mobile phase concentration: phosphate buffer/methanol (50/50, v/v), (2) phosphate buffer concentration (50 mM), (3) pH (4.72), (4) column temperature 30°C and (5) mobile phase flow rate (0.8 ml min-1). Excellent linearity was observed for all of the standard calibration curves, and the correlation coefficients were above 0.9999. Limits of detection for all of the analyzed compounds ranged between 0.02 and 0.11 µg ml-1; limits of quantitation ranged between 0.06 and 0.33 µg ml-1 The proposed method showed good prediction ability. The optimized method was validated according to ICH guidelines. Three commercially available tablets were analyzed showing good % recovery and %RSD.

Three-dimensional desirability spaces for quality-by-design-based HPLC development.

In this study, three-dimensional desirability spaces were introduced as a graphical representation method of design space. This was illustrated in the context of application of quality-by-design concepts on development of a stability indicating gradient reversed-phase high-performance liquid chromatography method for the determination of vinpocetine and α-tocopheryl acetate in a capsule dosage form. A mechanistic retention model to optimize gradient time, initial organic solvent concentration and ternary solvent ratio was constructed for each compound from six experimental runs. Then, desirability function of each optimized criterion and subsequently the global desirability function were calculated throughout the knowledge space. The three-dimensional desirability spaces were plotted as zones exceeding a threshold value of desirability index in space defined by the three optimized method parameters. Probabilistic mapping of desirability index aided selection of design space within the potential desirability subspaces. Three-dimensional desirability spaces offered better visualization and potential design spaces for the method as a function of three method parameters with ability to assign priorities to this critical quality as compared with the corresponding resolution spaces.

Development of a fast high performance liquid chromatographic screening system for eight antidiabetic drugs by an improved methodology of in-silico robustness simulation.

Robustness of RP-HPLC methods is a crucial method quality attribute which has gained an increasing interest throughout the efforts to apply quality by design concepts in analytical methodology. Improvement to design space modeling approaches to represent method robustness was the goal of many previous works. Modeling of design spaces regarding to method robustness fulfils quality by design essence of ensuring method validity throughout the design space. The current work aimed to describe an improvement to robustness modeling of design spaces in context of RP-HPLC method development for screening of eight antidiabetic drugs. The described improvement consisted of in-silico simulation of practical robustness testing procedures thus had the advantage of modeling design spaces with higher confidence in estimated of method robustness. The proposed in-silico robustness test was performed as a full factorial design of simulated method conditions deliberate shifts for each predicted point in knowledge space with modeling error propagation. Design space was then calculated as zones exceeding a threshold probability to pass the simulated robustness testing. Potential design spaces were mapped for three different stationary phases as a function of gradient elution parameters, pH and ternary solvent ratio. A robust and fast separation for the eight compounds within less than 6 min was selected and confirmed through experimental robustness testing. The effectiveness of this approach regarding definition of design spaces with ensured robustness and desired objectives was demonstrated.

Stability-Indicating Methods for Determination of Flubendazole and Its Degradants.

The resolution of flubendazole (FLB) and its degradants has been accomplished by using liquid chromatography (LC) using an octadecylsilane column and a mobile phase that consists of methanol and (0.1%) formic acid (75:25, v/v). Identification of FLB degradants was achieved with positive electron spray spectrometry detection. Furthermore, high-performance thin layer chromatography (HPTLC) separation was carried out using ethyl acetate:formic acid:acetic acid:water (9.5:0.11:0.11:0.28, v/v/v/v) as a mobile phase. Quantitation was achieved using densitometry at 254 nm. FLB was subjected to conditions of hydrolysis, photolysis, oxidation and thermal degradation. The proposed LC method determined that the kinetics of acidic and basic degradation followed a first-order kinetics, with an activation energy of 17.80 and 13.93 kcal mol(-1) for acidic and alkaline degradation processes, respectively. The pH-rate profiles of degradation of FLB in Britton-Robinson buffer solutions within the pH range (2-12) were studied. The developed methods were validated within the corresponding linear ranges of 3-30 µg mL(-1) with detection limits of 0.11 and 0.13 µg mL(-1) for FLB and DG1, respectively, for the high-performance liquid chromatography method and 10-65 and 5-30 µg band(-1) with detection limits of 0.22 and 0.30 µg band(-1) for FLB and DG1, respectively, for the HPTLC method.