Origin of Intense Luminescence from Supramolecular 2D Molecular Crystals.

Luminescence enhancement in 2D molecular crystals (2D crystals) is promising for a variety of optical applications, yet the availability is limited because of unclear mechanism and inefficient design strategy of luminescence control. Herein, the room temperature phosphorescence from micron long molecular thin free-standing 2D crystals of a mono-cyclometalated Ir(III) complex designed at the water surface is reported. A large luminescence enhancement is observed from the 2D crystals at 300 K, which is comparable with the rigidified solution at 77 K suggesting room temperature phosphorescence origin of the luminescence. In situ synchrotron grazing incidence X-ray diffraction measurements determine the constituent centered rectangular unit cells with precise molecular conformation that promotes the formation of 2D crystals. The molecular crystal design leads to a reduced singlet-triplet energy gap (ΔEST ) and mixing of singlet-triplet states by spin-orbit coupling (SOC) for efficient intersystem crossing, which explains the phosphorescence origin at room temperature and luminescence enhancement. The supramolecular assembly process provides an elegant design strategy to realize room temperature phosphorescence from 2D crystals by rigid intermolecular interactions.

Hierarchical heterostructure of Ag-nanoparticle decorated fullerene nanorods (Ag-FNRs) as an effective single particle freestanding SERS substrate.

A hierarchical heterostructure composed of silver nanoparticles (Ag-NPs: average diameter ∼10 nm) on fullerene nanorods (FNRs: average length ∼11 µm and average diameter ∼200 nm) was fabricated using a simple solution route. It was used as an effective single particle freestanding surface enhanced Raman scattering (SERS) substrate for the detection of target molecules (Rhodamine 6G: R6G). FNRs were formed ultra-rapidly (formation process completed in a few seconds) at a liquid-liquid interface of methanol and C60/mesitylene solution then Ag-NPs were grown directly on the surfaces of the FNRs by treatment with a solution of silver nitrate in ethanol. This unique hierarchical heterostructure allows efficient adsorption of target molecules also acting as an effective SERS substrate capable of detecting the adsorbed R6G molecules in the nanomolar concentration range. In this study, SERS spectra are acquired on an isolated single Ag-FNR for the detection of the absorbed molecule rather than from a bulk, large area film composed of silver/gold nanoparticles as used in conventional methods. Thus, this work provides a new approach for the design and fabrication of freestanding SERS substrates for molecular detection applications.

Self-Powered Sensors and Flexible Triboelectric Nanogenerator for Powering Portable Electronics.

We report on a flexible triboelectric nanogenerator (FTENG) designed using polydimethylsiloxane (PDMS) and aluminium (Al) combinations to convert ambient mechanical energy into electrical outputs. An open-circuit output voltage of ~40 V and short-circuit current density of ~63.6 mA m-2 with power density 0.62 W m-2 was easily obtained from the FTENG. The harvested mechanical energy is used for lighting ~100 light emitting diodes and to operate seven segment display enabling prospects for carbon-emission free environment friendly source for powering portable electronic devices. We have shown the capability of using the FTENG as self-powered weight and pressure sensors. Additionally, flexible design of the FTENG extends its application scope for self-powered tactile sensing in electronic skin for robotic application. The FTENG is simply designed, cost-effective, scalable and high-throughput for possible uses in flexible electronics, self-powered systems and body sensor networks.

Carbon Nanosheets by Morphology-Retained Carbonization of Two-Dimensional Assembled Anisotropic Carbon Nanorings.

Two-dimensional (2D) carbon nanomaterials possessing promising physical and chemical properties find applications in high-performance energy storage devices and catalysts. However, large-scale fabrication of 2D carbon nanostructures is based on a few specific carbon templates or precursors and poses a formidable challenge. Now a new bottom-up method for carbon nanosheet fabrication using a newly designed anisotropic carbon nanoring molecule, CPPhen, is presented. CPPhen was self-assembled at a dynamic air-water interface with a vortex motion to afford molecular nanosheets, which were then carbonized under inert gas flow. Their nanosheet morphologies were retained after carbonization, which has never been seen for low-molecular weight compounds. Furthermore, adding pyridine as a nitrogen dopant in the self-assembly step successfully afforded nitrogen-doped carbon nanosheets containing mainly pyridinic nitrogen species.

Induced Aggregation of AIE-Active Mono-Cyclometalated Ir(III) Complex into Supramolecular Branched Wires for Light-Emitting Diodes.

Aggregation-induced emission (AIE) is commonly observed in irregular bulk form. Herein, unique aggregation properties of an AIE-active complex into branched supramolecular wires are reported for the first time. Mono-cyclometalated Ir(III) complex shows in-plane J-aggregation at the air-water interface owing to the restriction of intramolecular vibration of bidentate phenylpyridinato and intramolecular rotations of monodentate triphenylphosphine ligands at air-water interface. As a consequence, a large enhancement of luminescence comparable to the solid state is obtained from the monolayers of supramolecular wires. This unique feature is utilized for the fabrication of light-emitting diodes with low threshold voltage using supramolecular wires as active layer. This study opens up the need of ordered assembly of AIE complexes to achieve optimal luminescence characteristics.

Mechanism of versatile catalytic activities of quaternary CuZnFeS nanocrystals designed by a rapid synthesis route.

Quaternary alloyed nanocrystals (NCs) composed of earth abundant, environment friendly elements are of interest for energy-harvesting applications. These complex NCs are useful as catalysts for the degradation of multiple refractory organic pollutants as well as nitro-organic reduction at a rapid rate. Here, a remarkably fast (∼30 s) and facile synthesis of crystalline quaternary chalcopyrite copper-zinc-iron-sulfide (CZIS) NCs is reported. These NCs show excellent catalytic properties by degrading a number of refractory organic dyes and converting nitro-compounds at a rapid rate. The valence and conduction band information of the newly designed NCs are extracted using scanning tunneling spectroscopy and ultraviolet photoelectron spectroscopy, which reveal energy levels suitable for performing redox chemistry by generating reactive radicals establishing NCs as efficient catalyst with multiple uses. Rapid synthesis of high quality phase-controlled CZIS NCs with robust catalytic activities could be useful for organic waste treatment.

Self-oriented ß-crystalline phase in the polyvinylidene fluoride ferroelectric and piezo-sensitive ultrathin Langmuir-Schaefer film.

We report on the direct observation of ferroelectric switching and piezoelectric behaviour in ultrathin polyvinylidene fluoride (PVDF) films prepared by horizontal Langmuir-Schaefer (LS) technique. We have prepared pure ß-phase by just increasing the number of LS layers without using additional non-ferroelectric assisting agents. Edge-on oriented CH2-CF2 units of PVDF at the air-water interface enable self-orientation of ferroelectric dipoles by means of the hydrogen bonding network. Such restricted conformation of PVDF at the air-water interface results in an increased net dipole moment with the number of LS layers. The film's ferroelectric switching and piezoelectric sensitivity are demonstrated by hysteretic polarization switching loops and butterfly-loops, respectively. Successful circular domain writing on ultrathin LS film, down to 5 monolayers of PVDF, is demonstrated. The achievement of pure ß-phase of PVDF at room temperature without using any assisting agents may be promising for non-volatile memory and piezoelectric-based, ultrathin smart sensor devices.

Efficient solid-state light-emitting CuCdS nanocrystals synthesized in air.

Semiconductor nanocrystals (NCs) possess high photoluminescence (PL) typically in the solution phase. In contrary, PL rapidly quenches in the solid state. Efficient solid state luminescence can be achieved by inducing a large Stokes shift. Here we report on a novel synthesis of compositionally controlled CuCdS NCs in air avoiding the usual complexity of using inert atmosphere. These NCs show long-range color tunability over the entire visible range with a remarkable Stokes shift up to about 1.25 eV. Overcoating the NCs leads to a high solid-state PL quantum yield (QY) of ca. 55% measured by using an integrating sphere. Unique charge carrier recombination mechanisms have been recognized from the NCs, which are correlated to the internal NC structure probed by using extended X-ray absorption fine structure (EXAFS) spectroscopy. EXAFS measurements show a Cu-rich surface and Cd-rich interior with 46% Cu(I) being randomly distributed within 84% of the NC volume creating additional transition states for PL. Color-tunable solid-state luminescence remains stable in air enabling fabrication of light-emitting diodes (LEDs).

Aligned 1-D nanorods of a π-gelator exhibit molecular orientation and excitation energy transport different from entangled fiber networks.

Linear π-gelators self-assemble into entangled fibers in which the molecules are arranged perpendicular to the fiber long axis. However, orientation of gelator molecules in a direction parallel to the long axes of the one-dimensional (1-D) structures remains challenging. Herein we demonstrate that, at the air-water interface, an oligo(p-phenylenevinylene)-derived π-gelator forms aligned nanorods of 340 ± 120 nm length and 34 ± 5 nm width, in which the gelator molecules are reoriented parallel to the long axis of the rods. The orientation change of the molecules results in distinct excited-state properties upon local photoexcitation, as evidenced by near-field scanning optical microscopy. A detailed understanding of the mechanism by which excitation energy migrates through these 1-D molecular assemblies might help in the design of supramolecular structures with improved charge-transport properties.

Modulation of glyceraldehyde-3-phosphate dehydrogenase activity by surface functionalized quantum dots.

Enzymatic regulation is a fast and reliable diagnosis tool via identification and design of inhibitors for modulation of enzyme function. Previous reports on quantum dots (QDs)-enzyme interactions reveal a protein-surface recognition ability leading to promising applications in protein stabilization, protein delivery, bio-sensing and detection. However, the direct use of QDs to control enzyme inhibition has never been revealed to date. Here we show that a series of biocompatible surface-functionalized metal-chalcogenide QDs can be used as potent inhibitors for malignant cells through the modulation of enzyme activity, while normal cells remain unaffected. The in vitro activity of glyceraldehyde-3-phosphate dehydrogenase (GAPDH), an enzyme involved critically in the glycolysis of cancer cells, is inactivated selectively in a controlled way by the QDs at a significantly low concentration (nM). Cumulative kinetic studies delineate that the QDs undergo both reversible and irreversible inhibition mechanisms owing to the site-specific interactions, enabling control over the inhibition kinetics. These complementary loss-of-function probes may offer a novel route for rapid clinical diagnosis of malignant cells and biomedical applications.

A bottom-up approach toward fabrication of ultrathin PbS sheets.

Two-dimensional (2D) sheets are currently in the spotlight of nanotechnology owing to high-performance device fabrication possibilities. Building a free-standing quantum sheet with controlled morphology is challenging when large planar geometry and ultranarrow thickness are simultaneously concerned. Coalescence of nanowires into large single-crystalline sheet is a promising approach leading to large, molecularly thick 2D sheets with controlled planar morphology. Here we report on a bottom-up approach to fabricate high-quality ultrathin 2D single crystalline sheets with well-defined rectangular morphology via collective coalescence of PbS nanowires. The ultrathin sheets are strictly rectangular with 1.8 nm thickness, 200-250 nm width, and 3-20 µm length. The sheets show high electrical conductivity at room and cryogenic temperatures upon device fabrication. Density functional theory (DFT) calculations reveal that a single row of delocalized orbitals of a nanowire is gradually converted into several parallel conduction channels upon sheet formation, which enable superior in-plane carrier conduction.

Fabrication of water-resistant fluorescent ink using the near-unity photoluminescence quantum yield of CsPbBr3 doped with NiBr2.

Doping with transition and alkaline earth metal ions into all-inorganic perovskite nanocrystals (NCs) has attracted attention recently for tuning the photoluminescence quantum yield (PLQY). We report on the hot injection synthesis of nickel ion-doped CsPbBr3 NCs with near-unity PLQYs. Nickel ions were successfully incorporated into the octahedral environment of CsPbBr3 NCs, replacing the lead ions. The introduction of nickel ions into CsPbBr3 NCs substantially eliminates intrinsic defects and halide vacancies for improved structural order and near-unity PLQYs. Benefiting from these unique properties, nickel ion-doped CsPbBr3 NCs were dispersed in a polymer to prepare an efficient fluorescent ink. The fluorescent ink shows excellent thermal and water stability under harsh environmental conditions. Moreover, the usefulness of the fluorescent ink for security purposes was demonstrated by designing and recognizing a fluorescent QR code. This study reveals that doped CsPbBr3 NCs can be used to prepare efficient water-resistant fluorescent ink for anti-counterfeiting applications, widening the usefulness of doped all-inorganic perovskite NCs.

Stereochemically Active Lone Pair Leads to Birefringence in the Vacancy Ordered Cs3Sb2Cl9 Perovskite Single Crystals.

Stereochemically active lone pair (SCALP) cations are attractive units for realizing optical anisotropy. Antimony(III) chloride perovskites with the SCALP have remained largely unknown to date. We synthesized a new vacancy ordered Cs3Sb2Cl9 perovskite single crystals with SbCl6 octahedral linkage containing the SCALP. Remarkably, all-inorganic halide perovskite Cs3Sb2Cl9 single crystals exhibit an exceptional birefringence of 0.12 ± 0.01 at 550 nm. The SCALP brings a large local structural distortion of the SbCl6 octahedra promoting birefringence optical responses in Cs3Sb2Cl9 single crystals. Theoretical calculations reveal that the considerable hybridization of Sb 5s and 5p with Cl 3p states largely contribute to the SCALP. Furthermore, the change in the Sb-Cl-Sb bond angle creates distortion in the SbCl6 octahedral arrangement in the apical and equatorial directions within the crystal structure incorporating the required anisotropy for the birefringence. This work explores pristine inorganic halide perovskite single crystals as a potential birefringent material with prospects in integrated optical devices.

Improved mechanical stability of acetoxypropyl cellulose upon blending with ultranarrow PbS nanowires in Langmuir monolayer matrix.

Cellulose and cellulose derivatives have long been used as membrane fabrication. Langmuir monolayer behavior, which naturally mimics membranes, of acetoxypropyl cellulose (APC) and lead sulfide (PbS) nanowire mixtures at different volume ratios is reported. Surface pressure (π)-area (A) isotherms of APC and PbS nanowires mixtures at different volume ratios show a gradual decrease in the monolayer area with increasing volume fraction of PbS nanowires. Change of surface potential with monolayer area at different volume ratios also reveals a gradual increase in the surface potential indicating incorporation of PbS nanowires within APC matrix. The compressibility and elastic constants measurements reveal an enhancement of the elasticity upon incorporation of PbS nanowires up to certain volume fractions. An enhancement in stability of the blend is observed upon PbS nanowire incorporation to the APC matrix. Rheological measurements also support the robustness of the mixture of APC and PbS nanowires in 3D bulk phase. Such robust ultrathin films of cellulose based-nanowire blend obtained by means of the Langmuir technique may lead to novel routes for designing cellulosic-based thin films and membranes.

Alkyl imidazolium ionic-liquid-mediated formation of gold particle superstructures.

The development of new methodologies for controlling the organization of quantum materials in multiple dimensions is crucial to the advancement of device fabrication. By using a self-assembly route using selected imidazolium ionic liquids bearing long alkyl chains (C(n)Imida, n = 8, 10, 12) as ligands, we have achieved a tunable assembly of quantum-sized gold nanoparticles. The initial stabilizer of the gold nanoparticles was partially or wholly substituted depending on the concentration and alkyl chain length. π-π interactions between imidazolium rings also promote the generation of spatially controlled aggregates from the nanometer to micrometer size regimes. In particular, in the case of an imidazolium ionic liquid with decyl chains, gold particles assemble into a core-shell spherical superstructure induced by the aggregation of imidazolium ionic liquid molecules during ligand exchange. Conceptually, the assemblies of nanoparticles mimic biological systems and provide strategies for the organization of single-component nanomaterials into functional assemblies for potential applications. Our approach is general and can be applied to other types of nanomaterials for facile manipulation of the assembly processes, permitting an exploration of physicochemical properties as well as technological applications.

Colloidal semiconductor nanocrystals: from bottom-up nanoarchitectonics to energy harvesting applications.

Colloidal semiconductor nanocrystals (NCs) have been extensively investigated owing to their unique properties induced by the quantum confinement effect. The advent of colloidal synthesis routes led to the design of stable colloidal NCs with uniform size, shape, and composition. Metal oxides, phosphides, and chalcogenides (ZnE, CdE, PbE, where E = S, Se, or Te) are few of the most important monocomponent semiconductor NCs, which show excellent optoelectronic properties. The ability to build quantum confined heterostructures comprising two or more semiconductor NCs offer greater customization and tunability of properties compared to their monocomponent counterparts. More recently, the halide perovskite NCs showed exceptional optoelectronic properties for energy generation and harvesting applications. Numerous applications including photovoltaic, photodetectors, light emitting devices, catalysis, photochemical devices, and solar driven fuel cells have demonstrated using these NCs in the recent past. Overall, semiconductor NCs prepared via the colloidal synthesis route offer immense potential to become an alternative to the presently available device applications. This feature article will explore the progress of NCs syntheses with outstanding potential to control the shape and spatial dimensionality required for photovoltaic, light emitting diode, and photocatalytic applications. We also attempt to address the challenges associated with achieving high efficiency devices with the NCs and possible solutions including interface engineering, packing control, encapsulation chemistry, and device architecture engineering.

Effect of point defects and impurities on the electronic transport of Au tipped ultranarrow PbS nanorods.

Electronic transport through single nanowire/nanorod directly probes the fundamental limits of semiconductor device miniaturization. Point defects or impurity centers form easily during the growth of nanorods/nanowires which may strongly affect the electronic transport efficiencies. Existing models of electronic transport are often unable to determine the role of defects and impurities at the nanoscale because there are significant differences between nanostructures and bulk materials arising from unique geometries and confinement. The effect of defect and impurities on the conductance of a model ultranarrow PbS rod was modeled using density functional theory. It was observed that the introduction of defects and Au impurities modified the orbital energies of PbS nanorods and reduced the conductance compared to the defect-free rod. The conductance for the nanorods with defects and impurities were limited by the number of available conduction channels required for efficient electronic conduction.

Structure and rheology of charge-free reverse micelles in aromatic liquid phenyloctane.

Reverse micelles formulation requires an inclusion of water or other polar molecules in the binary mixture of ionic surfactant and oil and generally exhibit spheroid geometry with a small aggregation number. Here, we report structure and rheology of charge-free (nonionic) reverse micelles in surfactant/oil systems. We have systematically investigated intrinsic parameters for the shape, size, and internal cross section structure control of such micelles using small-angle X-ray scattering (SAXS) and the rheometry. We found that diglycerol monomyristate (C14G2) when added into an aromatic organic liquid phenyloctane, spontaneously self-assembles into spheroid micelles with maximum diameter ca. 6.7 nm. Decrease in surfactant chain length favors globular-to-rod type transition and micellar aggregation number (N(agg)) increases significantly. On the other hand, increase in surfactant weight fraction induces one-dimensional (1-D) micellar growth; N(agg) increases in parallel to the surfactant concentration. Reverse micelles shrink with the rise of temperature, which is close to the rod-to-sphere type transition. However, water causes a significant micellar growth; N(agg) increases drastically, which shows that water not only increase reverse micellar size but also increases the number of surfactant molecules per micelle. All these microstructure transitions could be understood in terms of the modification of the critical packing parameter (cpp). The SAXS results are very well supported by the geometrical model fittings and rheometry.

Structural characterizations of diglycerol monomyristate reverse micelles in aromatic solvent ethylbenzene.

Using small-angle X-ray scattering (SAXS) we have investigated the shape and size of diglycerol monomyristate (designated as C14G2) nonionic surfactant reverse micelles in aromatic solvent ethylbenzene as a function of surfactant concentration, temperature, and water. When C14G2 is added into ethylbenzene globular type reverse micelles with maximum core diameter ca. 4.5 nm are formed under ambient conditions. The micellar structure (shape and size) did not change with the surfactant concentration. However, an increase in temperature decreased the micellar size due to an increase in the critical packing parameter (cpp). Surfactant becomes more lipophilic upon heating and the micellar curvature tends to become more negative at higher temperature. Addition of a small amount of water caused a significant micellar growth. For instance, incorporation of 0.3% water in the 5% C14G2/ethylbenzene system resulted in the formation of 2.1 time bigger micelles with a small water pool in the micellar core. Besides the micellar shape is modified into an ellipsoidal prolate, whose scenario can be understood in terms of hydration of the surfactant's headgroup. Hydration decreases the cpp and favors micellar growth. An increase of temperature of a water incorporated system decreased the micellar size due to dehydration, which is equivalent to rod-to-sphere type transition.

Size selective excitonic transition energies in strongly confined CdSe quantum dots.

We report on the synthesis of CdSe nanocrystal quantum dots (QDs) of different radii (R). Size dependent optical properties like increase in the confinement energy with decreasing radius for different excitonic transitions are studied. Different excitonic transitions are calculated from the second derivative of UV-vis absorption spectra of as synthesized CdSe QDs. The transitions are assigned to specific states by calculating the transition energies using effective mass approximation. A close matching of the transition energies with the experiment suggesting that the second derivative of the absorption spectra could provide a direct knowledge of the electronic transition for the direct band gap semiconductor quantum dots.