A laboratory study of the scouting ability of two reciprocating glide path instruments in mesial root canals of extracted mandibular molars.

AIM: To evaluate in a laboratory setting the performance of two reciprocating glide path systems, WaveOne Gold Glider (WO) and R-Pilot (RP), to create a glide path in mesial root canals of mandibular molars and to assess the torsional resistance of instruments after performing the glide path. METHODOLOGY: A total of 60 mesial root canals of extracted human mandibular molars were divided into two groups (n = 30) according to the glide path system to be used. The data from the volume of each canal, acquired by microcomputed tomography (micro-CT), were validated statistically for the anatomical pairing of the groups. Preparation time, frequency in gaining apical patency, plastic deformation rate of instruments, and canal transportation and centring ability were recorded and compared statistically. The torsional fatigue of the instruments after use was also evaluated. Data were analysed using Fisher's exact test and Mann-Whitney U-test with a 5% significance level. RESULTS: No significant differences were found between groups regarding the time required to perform the glide path, the frequency distributions of the canals classified as patent and the instruments with plastic deformation after use (P > 0.05). No significant differences were found between groups regarding the degree of canal transportation and centring ability at the cervical, middle and apical thirds (P > 0.05). The RP groups had significantly greater maximum torsional strength values compared with the WO groups (P < 0.05). The used WO group had greater angular deflection to fracture when compared to the new WO group (P < 0.05). A significant difference was also found in the percentage of loss of angular deflection in a comparison of the WO group with the RP group (P < 0.05). CONCLUSIONS: The WO and RP instruments performed the same in terms of preparation time, plastic deformation, gaining apical patency, degree of canal transportation and centring ability. The RP instruments had greater torsional strength, less angular deflection and lower percentage of loss in angular deflection than the WO. The used WO group had the greatest angular deflection values.

Effect of larger apical size on the quality of preparation in curved canals using reciprocating instruments with different heat thermal treatments.

AIM: To evaluate the influence of larger apical canal enlargement in curved canals using reciprocating systems subjected to various heat treatments. METHODOLOGY: Ninety mandibular premolars with root curvatures ranging from 20° to 30° were selected and scanned by microcomputed tomography (micro-CT) before and after root canal preparation with reciprocating systems (n = 30): Reciproc Blue (RB size 25, .08 taper and size 40, .06 taper; VDW, Munich, Germany), WaveOne Gold (WOG size 25, .07 taper and size 35, .06 taper; Dentsply Sirona, Ballaigues, Switzerland) and ProDesign R (PDR size 25, .06 taper and size 35, .05 taper; Easy Dental Equipment, Belo Horizonte, Brazil). Canal transportation, untouched areas, and apical and total root canal volumes were measured. Statistical analysis was performed with the nonparametric Kruskal-Wallis and Dunn's tests and a significance level set at 5%. RESULTS: The between-group comparison revealed no significant difference in untouched areas, canal transportation, and apical root canal volume among the groups (P > 0.05). However, WOG size 35, .06 taper was associated with a significant increase in the percentage of total canal volume in comparison to the PDR size 35, .05 taper (P < 0.05). The within-group comparison revealed a significant decrease in untouched areas, increase in apical and total root canal volume for all groups when using a larger instrument (P < 0.05). There was no significant difference in transportation among the groups and when a larger apical preparation was created (P > 0.05). CONCLUSIONS: Larger apical enlargement of curved canals was associated with a decrease in untouched areas, an increase in root canal volume and maintenance of canal trajectory. In addition, all systems were safe and provided similar root canal shapes.

The ability of three nickel-titanium mechanized systems to negotiate and shape MB2 canals in extracted maxillary first molars: a micro-computed tomographic study.

AIM: To evaluate the influence of three engine-driven NiTi file systems manufactured from different NiTi alloys for the preparation of second mesiobuccal (MB2) canals in extracted maxillary first molars using a micro-computed tomographic (micro-CT) scanner. METHODOLOGY: Thirty maxillary molars with two canals in the mesiobuccal root were selected and randomly divided into three groups (n = 10): Reciproc [REC; size 25, .08 taper; VDW, Munich, Germany], ProDesign R [PDR; size 25, .06 taper; Easy, Belo Horizonte, Brazil] and Mtwo [MO; size 25, .06 taper; VDW, Munich, Germany]. Before and after root canal preparation of the MB2 canal, the teeth were scanned using a micro-CT to evaluate canal transportation, centring ability, dentine thickness and volume change. The working time to achieve working length was also evaluated. All parameters were compared statistically using the Kruskal-Wallis and Dunn test for multiple comparisons, with a significance level of 5%. RESULTS: There was no significant difference amongst the groups regarding canal transportation and centring ability (P > 0.05). However, the PDR size 25, .06 taper group had significantly lower canal volume and volume of dentine removal compared with a MO size 25, .06 taper and REC size 25, .08 taper (P < 0.05). A root perforation was detected in MO size 25, .06 taper and REC size 25, .08 taper groups, respectively. Regarding the working time, the PDR size 25, .06 taper required a significantly longer time to achieve working length than MO size 25, .06 taper and REC size 25, .08 taper (P < 0.05). CONCLUSIONS: All NiTi systems had similar canal transportation, centring ability and increase in apical volume after preparation of MB2 canals. However, the PDR size 25, .06 taper had less volume of dentine removal, absence of root canal perforation and required a longer time to accomplish the root canal preparation.

Evaluation of apical transportation and centring ability of five thermally treated NiTi rotary systems.

AIM: To evaluate apical transportation and centring ability during root canal preparation in mesial root canals of mandibular molars associated with ProTaper Gold (PTG), ProDesign S (PDS), Hyflex CM (HCM), Hyflex EDM and ProDesign Logic (PDL). METHODOLOGY: Sixty mandibular first molars with two separate canals in the mesial root were selected after root anatomy pairing by microcomputed tomography (microCT). The teeth were randomly divided into five groups (n = 24); the root canal volume was calculated to ensure sample homogeneity. All the root canals were prepared up to size 25 in accordance with the instructions of each rotary system manufacturer. After root canal preparation, the teeth were scanned by microCT to analyse apical transportation, root canal centralization and the pre- and post-preparation root canal volume at the apical and cervical levels. Kruskal-Wallis and Dunn tests were used for comparisons amongst groups for transportation values. For volume changes, the parametric ANOVA and Tukey's tests were used RESULTS: There were no significant differences in apical transportation amongst the rotary systems (P > 0.05). All the systems created apical transportation; values ranging from 0.031 mm (PDL) to 0.072 mm (PTG), and enlargements between 39% (HCM) and 91.1% (PDS) were observed. In relative to cervical transportation, significant differences were observed amongst the systems (P < 0.05). Mean transportation values between 0.07 mm (HCM) and 0.172 mm (PTG) were found, with enlargements between 35.4% (HCM) and 51.5% (PDS). CONCLUSION: All the thermally treated systems resulted in similar apical transportation. In the cervical region, the Hyflex CM and Prodesign Logic systems were associated with more centred preparations.

Torsional fatigue resistance of pathfinding instruments manufactured from several nickel-titanium alloys.

AIM: To evaluate the torsional properties of pathfinding nickel-titanium (NiTi) rotary instruments manufactured from several NiTi alloys, ProGlider (M-wire), Hyflex GPF (conventional NiTi Wire and controlled memory wire), Logic (conventional NiTi wire and controlled memory wire) and Mtwo (conventional NiTi wire). METHODOLOGY: A total of 56 NiTi instruments from Glidepath rotary systems (n = 8) were used: Logic (size 25, .01 taper), Logic CM (size 25, .01 taper), ProGlider (size 16, .02 taper), Hyflex GPF (size 15, .01 taper), Hyflex GPF CM (size 15, .02 taper; size 20, .02 taper) and Mtwo (size 10, .04 taper). The torsion tests were performed based on ISO 3630-1 (1992). Three millimetres of each instrument tip was clamped to a small load cell by a lever arm linked to the torsion axis. Data were analysed using a one-way analysis of variance (anova) and Tukey test with a significance level at a = 5%. RESULTS: The Logic size 25, .01 taper had significantly higher torsional strength values (P < 0.05). The ProGlider was significantly different when compared with Hyflex GPF size 15, .01 taper and size 15, .02 taper (P < 0.05). The Logic CM size 25, .01 taper had significantly higher torsional strength than Hyflex GPF size 15, .01 taper and size 15, .02 taper (P < 0.05). No difference was found amongst Mtwo size 10, .04 taper and Hyflex GPF groups (size 15, .01 taper; size 15, .02 taper; size 20, .02 taper). In relation to the angle of rotation, Logic CM size 25, .01 taper and Hyflex GPF size 15, .01 taper had the highest angle values (P < 0.05). The ProGlider had the lowest angle values in comparison with all the groups (P < 0.05) followed by Mtwo size 10, .04 taper. The Logic size 25, .01 taper had significantly higher angle of rotation values than ProGlider and Mtwo size 10, .04 taper (P < 0.05). CONCLUSION: The Logic size 25, .01 taper instrument made of conventional NiTi alloy had the highest torsional strength of all instruments tested. In addition, the ProGlider instrument manufactured from M-Wire alloy had the lowest angle of rotation to fracture in comparison with the other instruments.

Effect of finishing instrumentation using NiTi hand files on volume, surface area and uninstrumented surfaces in C-shaped root canal systems.

AIM: To assess the effect of 90°-oscillatory instrumentation with hand files on several morphological parameters (volume, surface area and uninstrumented surface) in C-shaped root canals after instrumentation using a single-file reciprocation system (Reciproc; VDW, Munich, Germany) and a Self-Adjusting File System (SAF; ReDent Nova, Ra'anana, Israel). METHODOLOGY: Twenty mandibular second molars with C-shaped canals and C1 canal configurations were divided into two groups (n = 10) and instrumented with Reciproc and SAF instruments. A size 30 NiTi hand K-file attached to a 90°-oscillatory motion handpiece was used as final instrumentation in both groups. The specimens were scanned using micro-computed tomography after all procedures. Volume, surface area increase and uninstrumented root canal surface were analysed using CTAn software (Bruker-microCT, Kontich, Belgium). Also, the uninstrumented root canal surface was calculated for each canal third. All values were compared between groups using the Mann-Whitney test and within groups using the Wilcoxon's signed-rank test. RESULTS: Instrumentation with Reciproc significantly increased canal volume compared with instrumentation with SAF. Additionally, the canal volumes were significantly increased after 90°-oscillatory instrumentation (between and within group comparison; (P < 0.05)). Regarding the increase in surface area after all instrumentation protocols, statistical analysis only revealed significant differences in the within groups comparison (P < 0.05). Reciproc and SAF instrumentation yielded an uninstrumented root canal surface of 28% and 34%, respectively, which was not significantly different (P > 0.05). Final oscillatory instrumentation significantly reduced the uninstrumented root canal surface from 28% to 9% (Reciproc) and from 34% to 15% (SAF; P < 0.05). The apical and middle thirds exhibited larger uninstrumented root canal surfaces after the first instrumentation that was significantly reduced after oscillatory instrumentation (P < 0.05). CONCLUSIONS: The Reciproc and SAF system were associated with similar morphological parameters after instrumentation of mandibular second molars with C-shaped canals except for a higher canal volume increase in the Reciproc group compared to the SAF. Furthermore, the final use of 90°-oscillatory instrumentation using NiTi hand files significantly decreased the uninstrumented canal walls that remained after Reciproc and SAF instrumentation.

Comparison of three retreatment techniques with ultrasonic activation in flattened canals using micro-computed tomography and scanning electron microscopy.

AIM: To use micro-CT to quantitatively evaluate the amount of residual filling material after using several techniques to remove root fillings with and without ultrasonic activation and to analyse the cleanliness of the root canal walls and dentine tubules with scanning electron microscopy (SEM). METHODOLOGY: The root canals of one hundred and eight human mandibular incisors were selected and instrumented with rotary files using the BioRace system up to file size 40, .04 taper. After instrumentation, the teeth were filled using a hybrid technique with gutta-percha and sealer then divided into three groups according to the method used for removing the root filling: G1-Reciproc (using only instrument R50), G2-ProTaper Universal retreatment system and G3-Manual (hand files and Gates-Glidden burs). All groups were divided into two subgroups depending on whether ultrasonic agitation was used with the irrigants. Micro-CT scans were taken before and after removal of the filling material to detect residual material in the canal. After micro-CT analysis, the roots were cut in half, imaged by SEM and scored based on the amount of surface covered by root filling remnants. The data were analysed statistically using a significance level of 5%. RESULTS: All groups had retained material in the root canals after instrumentation. The Reciproc method was associated with less retained material than the ProTaper and Manual methods. Ultrasonic activation significantly reduced the amount of residual root filling in all groups (P < 0.05). CONCLUSION: None of the instrumentation methods were able to completely remove root filling material. Ultrasonic activation improved the removal of root filling material in all groups.

[Primary intestinal parasitic fibroid, an incidental finding during gynecological laparoscopic surgery]. / Mioma parasitario intestinal primario como hallazgo durante la cirugía laparoscópica ginecológica.

Background: Uterine fibroids are the most frequent solid pelvic benign tumors in women. Their most common location is the uterine corpus, cervix and broad ligament but they can also be found in other areas, less commonly as extragenital locations and/or in a parasitic way. Clinical case: A 40 years old patient, who consulted for menorrhagia and dysmenorrhea on long evolution. On physical examination, the enlarged uterus, inflamated, hard consistency and normal mobility was identified. The sonographic features and location suggested a fibroid nodule type II (Wamsteker classification), which deformed the endometrial cavity. It was decided to perform the surgery and during the procedure the enlarged uterus, deformed at the expense of a localized fundal formation, like a intramural fibroid. By mobilizing the intestinal loops and change the position of the patient (Trendelenburg) a solid tumor, cranially separated from the internal genitals it was observed. In reviewing the insertion site, it was visualized that remained attached to antimesial of the jejunum. Total hysterectomy was performed with monopolar and bipolar energy, and vascular sealant. The postoperative was favorable, without complication. The pathological study reported a primary leiomyoma of the small intestine, while in the uterus of multiple myomas was confirmed. Conclusión: The parasitic fibroids are those located separately from the uterus that receive vascular irrigation from another organ or abdominopelvic structure. They are a very rare pathology. The diagnosis has made as an accidental event, during an abdominal surgery or during the differential diagnosis of a abdominopelvic tumor. The therapeutical choice depends on the clinical presentation, the location of the fibroid and the reproductive desires of the patient, most commonly recomending their surgycal removal.

Clinical Pathway for Patients with Acute or Chronic Urticaria: A Consensus Statement of the Andalusian Section of the Spanish Academy of Dermatology and Venereology (AEDV). / Proceso de atención al paciente con urticaria aguda y crónica. Documento de consenso de la sección territorial andaluza de la Academia Española de Dermatología y Venereología.

Attention has been focused on new ways to understand and manage urticaria ever since the recent addition of novel drugs to the therapeutic arsenal, the updating of clinical practice guidelines, and the publication of pathophysiologic insights. The Andalusian Section of the Spanish Academy of Dermatology and Venereology (AEDV) has developed a clinical pathway that defines quality-of-care characteristics and makes recommendations on decision-making affecting patients with urticaria. We present a patient-centered approach to care, in which the patient's clinical pathway through the health care system includes links between primary and hospital care to ensure continuity-a key feature of quality.

Process of Care for Patients With Benign Cysts and Tumors: Consensus Document of the Andalusian Regional Section of the Spanish Academy of Dermatology and Venereology (AEDV). / Proceso de atención a las personas con lesiones quísticas y tumorales benignas. Documento de consenso de la sección territorial andaluza de la Academia Española de Dermatología Médico-Quirúrgica y Venereología.

Benign skin lesions are a common reason for visits to primary care physicians and dermatologists. However, access to diagnosis and treatment for these lesions varies considerably between users, primarily because no explicit or standardized criteria for dealing with these patients have been defined. Principally with a view to reducing this variability in the care of patients with benign cysts or tumors, the Andalusian Regional Section of the Spanish Academy of Dermatology and Venereology (AEDV) has created a Process of Care document that describes a clinical pathway and quality-of-care characteristics for each action. This report also makes recommendations for decision-making with respect to lesions of this type.

Sequenom MassARRAY approach in the arrhythmogenic right ventricular cardiomyopathy post-mortem setting: clinical and forensic implications.

Arrhythmogenic right ventricular cardiomyopathy (ARVC) is a rare cardiac disease characterized by myocardial fibrofatty replacement, which can lead to sudden death. Previous studies have described a reduction of plakoglobin (PKG) protein at the level of intercalated disks as the hallmark of ARVC. The main objective of this study was to investigate the involvement of desmosome mutations in the histological phenotype of ARVC. We performed a genetic analysis of ARVC cases, and histological characterization of ARVC heart tissue samples. We genetically analyzed 48 ARVC cases distributed into two groups: 42 human tissue heart samples with conclusive diagnoses of ARVC after post-mortem examination; and six DNA samples from peripheral blood of living patients who were clinically diagnosed. Sequenom MassARRAY analysis revealed three ARVC-associated variants in three patients in 42 tissue samples (7.14 %). Three individuals carried one single pathogenic mutation, p.R811S _PKP2, p.S824L_DSC2, and p.T526M_PKP2 in postmortem samples. In the living patients group, Sequenom MassARRAY revealed no mutation, however, later Sanger sequencing analysis identified three ARVC mutations in 2/6 patients not included in the Sequenom design. In post-mortem tissue samples we performed immunohistochemical labeling for desmosomal proteins and Connexin 43. This study revealed that PKP2 carriers present either absent or clearly reduced PKG immunolabeling, while the DSC2 carrier showed PKG immunolabeling similar to control samples. Immunolabeling for Cx43 did not show any differences compared to controls. The present Sequenom MassARRAY design is a useful tool for post-mortem genetic diagnosis of ARVC. Plakoglobin reduction occurs at intercalated disks, while other desmosome proteins and Cx43 remain unaltered.

Effect of ultrasonic agitation on marginal adaptation, intratubular penetration and bonding strength of calcium-silicate-based endodontic sealers: A laboratory study.

The effect of ultrasonic activation (UA) on marginal adaptation, intratubular penetration and bond strength provided by three calcium silicate-based sealers was evaluated. Ninety-six distobuccal root canals of maxillary molars were randomly divided into 8 groups (n = 12) according to the sealer and UA application: EndoSequence BC sealer (ESBC), Sealer Plus BC (SPBC) and Bio-C Sealer (BCS), using AH Plus (AH) as a control group. The specimens were sectioned at 2, 4 and 6 mm from the apex. The data were statistically analysed using Kruskall-Wallis, Dunn, Mann-Whitney and chi-squared tests. UA improved the marginal adaptation of ESBC (6 mm), SPBC (all levels), BCS (2/4 mm) and AH (4 mm) (p < 0.05); the bond strength of SBPC (2 mm) and BCS (6 mm) were also improved (p < 0.05). The UA of endodontic silicate-based sealers improved the marginal adaptation in all levels and the bond strength of SBPC and BCS sealer.

A Review and Follow-Up of Uterine Smooth Muscle Tumours of Uncertain Malignant Potential (STUMP): A Case Series and Literature Review.

OBJECTIVES: to analyse the clinical-pathological characteristics, treatment, and evolution of uterine smooth muscle tumours with uncertain malignant potential (STUMP) diagnosed in the Salamanca University Hospital with the implementation of the 2014 WHO criteria. MATERIALS AND METHODS: a retrospective descriptive study of patients diagnosed with STUMP from January 2015 to March 2023 at the Salamanca University Hospital. Demographic data, preoperative clinical data, treatment, complications, therapeutic results, anatomopathological findings and recurrence time were obtained. RESULTS: a total of four patients were identified and included in the study. The mean age at diagnosis was 48 years (range 36-67). The surgical indications were abnormal uterine bleeding, compressive symptoms, and the growth of a pelvic mass suspected to be a degenerated myoma from the residual cervix after a subtotal hysterectomy 6 years earlier. In all cases, a laparotomic procedure was performed. A total hysterectomy, sub-total hysterectomy, and the excision of the cervix with STUMP localization were accomplished in two, one, and one patient, respectively. The mean diameter of the tumour pieces was 13 cm (range 8-17 cm), with a mean volume of 816 cc (range 234-1467 cc). The mean follow-up was 47 months, with no recurrence to date. CONCLUSIONS: STUMPs are a heterogeneous group of tumours with a difficult-to-predict clinical evolution. In most cases, their diagnosis is histological after performing surgery for suspected leiomyoma. Due to their low incidence, there are no specific guidelines for their treatment and control. However, considering their potential risk of recurrence and metastasis, it is advisable to maintain six-monthly controls for 5 years and then annual controls for 5 years more.

Reproductive Health Practices in Spanish Women Who Underwent Voluntary Termination of Pregnancy.

Background: The incidence of Voluntary Termination of Pregnancy (VTP) is an important indicator of unplanned pregnancies and the differences in the functioning of contraceptive services and the effectiveness of their use. Its analysis is essential for monitoring the well-being of women and their partners. Our aim was to analyse the socio-demographic profile of women who request voluntary termination of pregnancy in the province of Salamanca, as well as their satisfaction with the intervention and its influence on their contraceptive methods. Methods: An intervention study (before-after) designed without a control group, including all women requesting a voluntary termination of pregnancy through the Salamanca Public Health System. Socio-demographic and reproductive health variables were used. After the termination of pregnancy, a satisfaction survey and analysis of consequences were carried out. Results: A total of 176 surveys were obtained. Women who underwent VTP in Salamanca were between 20 and 25 years old, had secondary education but were still studying or working, lived alone and had no children. The most commonly used contraceptive method was the condom (55%), followed by the pill (25%). The most frequent reason for termination of pregnancy was economic (47.7%). The abortion entailed a significant change in contraception. Whereas before the abortion only 34% used a hormonal method, 66% were willing to use one afterwards (p = 0.006). Conclusion: Reproductive health education needs to be improved so that couples use reliable contraceptive methods appropriately. Although women are generally satisfied with the care received during abortion, they would prefer better accessibility to the procedure and more comprehensive information about the process from a neutral stance.

Engineering platforms for directed evolution of Laccase from Pycnoporus cinnabarinus.

While the Pycnoporus cinnabarinus laccase (PcL) is one of the most promising high-redox-potential enzymes for environmental biocatalysis, its practical use has to date remained limited due to the lack of directed evolution platforms with which to improve its features. Here, we describe the construction of a PcL fusion gene and the optimization of conditions to induce its functional expression in Saccharomyces cerevisiae, facilitating its directed evolution and semirational engineering. The native PcL signal peptide was replaced by the α-factor preproleader, and this construct was subjected to six rounds of evolution coupled to a multiscreening assay based on the oxidation of natural and synthetic redox mediators at more neutral pHs. The laccase total activity was enhanced 8,000-fold: the evolved α-factor preproleader improved secretion levels 40-fold, and several mutations in mature laccase provided a 13.7-fold increase in k(cat). While the pH activity profile was shifted to more neutral values, the thermostability and the broad substrate specificity of PcL were retained. Evolved variants were highly secreted by Aspergillus niger (∼23 mg/liter), which addresses the potential use of this combined-expression system for protein engineering. The mapping of mutations onto the PcL crystal structure shed new light on the oxidation of phenolic and nonphenolic substrates. Furthermore, some mutations arising in the evolved preproleader highlighted its potential for heterologous expression of fungal laccases in yeast (S. cerevisiae).

[Epidemic outbreak of Pseudomonas aeruginosa carbepenem-resistant producing metallo-beta-lactamase]. / Detección de un brote epidémico por Pseudomonas aeruginosa multirresistente productora de metalo-beta-lactamasa.

OBJECTIVE: To describe the nosocomial outbreak of multiresistant Pseudomonas aeruginosa producing metallo-beta-lactamase (MBL) in Cartagena (Murcia, Spain). MATERIAL AND METHODS: In May 2009, six consecutive isolations of multiresistant Pseudomonas aeruginosa were detected. These were characterized by their profile of resistance to imipenem and cephalosporins and sensibility to aztreonam, this suggesting the production of carbapenemases. The isolations were screened for MBL and a PCR for the detection of the VIM gene was performed. Secondary, all of the isolations having the same characteristics in the year 2009 were analyzed retrospectively in order to establish the possibility of an endemic infection. RESULTS: The molecular typing of the isolates revealed two clones in Pulsed Field Gel Electrophoresis (PFGE), the most frequent (Type 1) being represented by 4 isolates. All of them came from patients who were in the Intensive Care Unit. All (100%) of the isolates of the outbreak were considered to be multiresistant. PCR confirmed the presence of the VIM gene related with the production of MBL in 100% of the isolates corresponding to pulsotype 1. CONCLUSIONS: We detected the existence of an outbreak of carbapenem-resistant Pseudomonas aeruginosa producing metallo-beta-lactamase. Am evident therapeutic problem as well as a problem of nosocomial infection was considered. The isolation means should be maximized and routine controls performed for the presence of MBL given its elevated prevalence in our setting.

Shaping ability of hand, rotary and reciprocating files in primary teeth: a micro-CT study in vitro.

PURPOSE: Compare canal transportation and dentin removal using micro computed tomography (micro-CT) and measure instrumentation time in the root canal preparation of primary molars using K-files, ProDesign Logic and Reciproc files. METHODS: A representative sample of 81 root canals of primary molars was randomised into three groups: K-files (#15-40), ProDesign Logic (#25) and Reciproc (R25). A single-trained operator prepared all root canals. A standardised micro-CT evaluation was performed before and after instrumentation using the CTan® program. Instrumentation time was also recorded. Statistical analysis involved one-way ANOVA, Tukey's post hoc test, Kruskal-Wallis test and Dunn's test, considering a 5% level of significance. RESULTS: Reciproc led to more canal transportation than K-files and ProDesign Logic (p < 0.001) in middle third, whereas K-files led to the most canal transportation in the apical third (p = 0.017). ProDesign Logic and Reciproc removed less dentin on the opposite side of the root curvature in the apical third compared to K-files (p = 0.008). Instrumentation time was better with ProDesign Logic and Reciproc than K-files (p < 0.001). CONCLUSION: ProDesign Logic demonstrated good results with regard to canal transportation and required less instrumentation time in primary molars. Reciproc and K-files led to the most canal transportation in the middle and apical third, respectively.