RESUMEN
Gene delivery is a complex process with several challenges when attempting to incorporate genetic material efficiently and safely into target cells. Some of the key challenges include not only efficient cellular uptake and endosomal escape to ensure that the genetic material can exert its effect but also minimizing the toxicity of the delivery system, which is vital for safe gene delivery. Of importance, if gene delivery systems are intended for biomedical applications or clinical use, they must be scalable and easy and affordable to manufacture to meet the demand. Here, we show an efficient gene delivery method using a combination of carbon dots coated by PEI through electrostatic binding to easily generate cationic carbon dots. We show a biofunctional approach to generate optimal cationic carbon dots (CCDs) that can be scaled up to meet specific transfection demands. CCDs improve cell viability and increase transfection efficiency four times over the standard of PEI polyplexes. Generated CCDs enabled the challenging transfection protocol to produce retroviral vectors via cell cotransfection of three different plasmids into packing cells, showing not only high efficiency but also functionality of the gene delivery, tested as the capacity to produce infective retroviral particles.
RESUMEN
The mode of action toward gastric cancer cells of brominated Coelenteramine, an analogue of a metabolic product of a marine bioluminescent reaction, was investigated by synchrotron radiation-based Fourier Transform Infrared spectrocopy (FTIR). This method revealed that the anticancer activity of brominated Coelenteramine is closely connected with cellular lipids, by affecting their organization and composition. More specifically, there is an increasing extent of oxidative stress, which results in changes in membrane polarity, lipid chain packing and lipid composition. However, this effect was not observed in a noncancer cell line, helping to explain its selectivity profile. Thus, synchrotron radiation-based FTIR helped to identify the potential of this Coelenteramine analogue in targeting membrane lipids, while proving to be a powerful technique to probe the mechanism of anticancer drugs.
Asunto(s)
Neoplasias , Sincrotrones , Humanos , Espectroscopía Infrarroja por Transformada de Fourier/métodos , Estrés Oxidativo , LípidosRESUMEN
In this work, we have studied the photodissociation of the protonated derivatives of N-nitrosodimethylamine [(CH3)2N-NO] with the CASPT2 method. It is found that only one of the four possible protonated species of the dialkylnitrosamine compound absorbs in the visible region at 453 nm, that is, N-nitrosoammonium ion [(CH3)2NH-NO]+. This species is also the only one whose first singlet excited state is dissociative to directly yield the aminium radical cation [(CH3)2NHN·]+ and nitric oxide. In addition, we have studied the intramolecular proton migration reaction {[(CH3)2N-NOH]+ â [(CH3)2NH-NO]+} both in the ground and excited state (ESIPT/GSIPT); our results indicate that this process is not accessible neither in the ground nor in the first excited state. Furthermore, as a first approximation, MP2/HF calculations on the nitrosamine-acid complex indicate that in acidic solutions of aprotic solvents, only [(CH3)2NH-NO]+ is formed.
RESUMEN
In this work, the decomposition of a prototypical azide, isopropyl azide, both in the ground and excited states, has been investigated through the use of multiconfigurational CASSCF and MS-CASPT2 electronic structure approaches. Particular emphasis has been placed on the thermal reaction starting at the S0 ground state surface. It has been found that the azide thermally decomposes via a stepwise mechanism, whose rate-determining step is the formation of isopropyl nitrene, which is, in turn, the first step of the global mechanism. After that, the nitrene isomerizes to the corresponding imine derivative. Two routes are possible for such a decomposition: (i) a spin-allowed path involving a transition state; and (ii) a spin-forbidden one via a S0/T0 intersystem crossing. Both intermediates have been determined and characterised. Their associated relative energies have been found to be quite similar, 45.75 and 45.52 kcal mol-1, respectively. To complete this study, the kinetics of the singlet and triplet channels are modeled with the MESMER (Master Equation Solver for Multi-Energy Well Reactions) code by applying the RRKM and Landau-Zener (with WKB tunnelling correction) theories, respectively. It is found that the canonical rate-coefficients of the singlet path are 2-orders of magnitude higher than the rate-coefficients of the forbidden reaction. In addition, the concerted mechanism has been investigated that would lead to the formation of the imine derivative and nitrogen extrusion in the first step of the decomposition. After a careful analysis of CASSCF calculations with different active spaces and their comparison with single electronic configuration methods (MP2 and B3LYP), the concerted mechanism is discarded.
RESUMEN
The electronic structure of nitrobenzene (C6H5NO2) has been studied by means of the complete active space self-consistent field (CASSCF) and multi-state second-order perturbation (MS-CASPT2) methods. To this end, an active space of 20 electrons distributed in 17 orbitals has been selected to construct the reference wave function. In this work, we have calculated the vertical excitation energies and the energy barrier for the dissociation of the molecule on the ground state into phenyl and nitrogen dioxide. After applying the corresponding vibrational corrections to the electronic energies, it is demonstrated that the MS-CASPT2//CASSCF values obtained in this work yield an excellent agreement between calculated and experimental data. In addition, other active spaces of lower size have been applied to the system in order to check the active space dependence in the results.
RESUMEN
This work studies the photochemical and thermal decompositions of azidoacetonitrile (N3 CH2 CN) from both the experimental and theoretical points of view. The data of the photochemical experiments are taken from the literature, while the thermal decomposition have been carried out by us. In addition, we have performed ab initio calculations of the multiconfigurational type [complete active space self-consistent field (CASSCF) and the multistate multireference perturbation theory (MS-CASPT2)]. It is found that the first step of both type of decompositions is N2 elimination and formation of closed shell singlet nitrene. Afterwards, the nitrene tends to rapidly rearrange into formimidoyl cyanide (HNCHCN). As both reactions progress, the imine isomerizes into formimidoyl isocyanide (HNCHNC). The photoisomerization of the imine takes places thorough a conical intersection, while the same reaction on the ground electronic state occurs via a conventional transition state. The last step of the global reaction is decomposition of the imines into HCN and CNH. In photochemical conditions, the conjunction of the imines and its dissociation products (HCN and CNH) yields adenine.
RESUMEN
UV photodecomposition of azidomethyl methyl sulfide (AMMS) yields a transient S-methylthiaziridine which rapidly evolves to S-methyl-N-sulfenylmethanimine at 10 K. This species was detected by infrared matrix isolation spectroscopy. The mechanism of the photoreaction of AMMS has been investigated by a combined approach, using low-temperature matrix isolation FTIR spectroscopy in conjunction with two theoretical methods, namely, complete active space self-consistent field and multiconfigurational second-order perturbation. The key step of the reaction is governed by a S2/S1 conical intersection localized in the neighborhood of the singlet nitrene minimum which is formed in the first reaction step of the photolysis, that is, N2 elimination from AMMS. Full assignment of the observed infrared spectra of AMMS has been carried out based on comparison with density functional theory and second-order perturbation Møller-Plesset methods.
RESUMEN
Carbon dots have attracted great attention from the research community given their very attractive luminescent properties. However, the recent discovery that some of these properties may result from fluorescent impurities originating from the synthesis process, and not from the carbon dots themselves, constitute a significant setback to our knowledge of these materials. Herein, we proceeded to the study of carbon dots generated from citric acid and urea via a microwave-assisted synthesis, focusing on their analysis by AFM, HR-TEM, XPS, FT-IR, ESI-MS, UV-Vis and fluorescence spectroscopy. We have found that this synthesis process does generate molecular fluorophores that can mask the luminescence of the carbon dots. More importantly, our data demonstrates that when present in the same solution, the carbon dots and these fluorophores do not behave as separated species with individual emission. Instead, they interact to produce a hybrid luminescence, which excited state properties and reactivity are different from the properties of the individual species. These results indicate the possibility for the development of hybrid materials composed by carbon dots and related molecular fluorophores with new and improved properties.
RESUMEN
It is described a simple, rapid and efficient methodology to characterise and separate gold nanoprisms and nanooctahedra by capillary electrophoresis. This technique is suitable to distinguish between morphologies and it can be used as a powerful separation tool after a customised synthesis of both structures. This synthesis was carried out by amending two parameters, temperature and pH, and a sharp decrease was found in nanotriangles when temperature was increased from 70 up to 95°C. However, when the synthesis was performed at a given temperature, an increase in pH did not promote an important change in isolation of any structure until pH = 9.5, critical in the final morphology of the nanoparticle. Gold nanoprisms and nanooctahedra were successfully separated by capillary electrophoresis according to differences in charge-to-mass ratio of the morphologies. Final particle morphology was confirmed by transmission electron microscopy analysis. Under optimal working conditions, a mixture containing both shapes of gold nanoparticles was initially injected and two major peaks were obtained for each structure. Capillary electrophoresis allowed to study pH and temperature influence on both morphologies. It was inferred that the ratio between triangles and octahedra decreased to a great extent when increasing both temperature and pH.
Asunto(s)
Electroforesis Capilar , Oro , Nanopartículas del Metal/análisis , Electroforesis Capilar/métodos , Nanopartículas del Metal/química , Nanotecnología/métodosRESUMEN
Nanoparticle-based nanocarriers represent a viable alternative to conventional direct administration in cancer cells. This advanced approach employs the use of nanotechnology to transport therapeutic agents directly to cancer cells, thereby reducing the risk of damage to healthy cells and enhancing the efficacy of treatment. By approving nanoparticle-based nanocarriers, the potential for targeted, effective treatment is greatly increased. The so-called carbon-based nanoparticles, or carbon dots, have been hydrothermally prepared and initiated by a polymerization process. We synthesized and characterized nanoparticles of 2-acrylamido-2-methylpropanesulfonic acid, which showed biocompatibility with glioblastoma cells, and further, we tested them as a carrier for the drug riluzole. The obtained nanoparticles have been extensively characterized by techniques to obtain the exact composition of their surface by using Fourier transform infrared (FTIR), X-ray photoelectron spectroscopy (XPS), and nuclear magnetic resonance (NMR) spectroscopy, as well as cryo-transmission electron microscopy. We found that the surface of the synthesized nanoparticles (NPs) is covered mainly by sulfonated, carboxylic, and substituted amide groups. These functional groups make them suitable as carriers for drug delivery in cancer cells. Specifically, we have successfully utilized the NPs as a delivery system for the drug riluzole, which has shown efficacy in treating glioblastoma cancer cells. The effect of nanoparticles as carriers for the riluzole system on glioblastoma cells was studied using live-cell synchrotron-based FTIR microspectroscopy to monitor in situ biochemical changes. After applying nanoparticles as nanocarriers, we have observed changes in all biomacromolecules, including the nucleic acids and protein conformation. These findings provide a strong foundation for further exploration into the development of targeted treatments for glioblastoma.
RESUMEN
The literature data emphasize that nanoparticles might improve the beneficial effects of near-infrared light (NIR) on wound healing. This study investigates the mechanisms of the synergistic wound healing potential of NIR light and silver metal-organic frameworks combined with nitrogen- and sulfur-doped carbon dots (AgMOFsN-CDs and AgMOFsS-CDs, respectively), which was conducted by testing the fibroblasts viability, scratch assays, biochemical analysis, and synchrotron-based Fourier transform infrared (SR-FTIR) cell spectroscopy and imaging. Our findings reveal that the combined treatment of AgMOFsN-CDs and NIR light significantly increases cell viability to nearly 150% and promotes cell proliferation, with reduced interleukin-1 levels, suggesting an anti-inflammatory response. SR-FTIR spectroscopy shows this combined treatment results in unique protein alterations, including increased α-helix structures and reduced cross-ß. Additionally, protein synthesis was enhanced upon the combined treatment. The likely mechanism behind the observed changes is the charge-specific interaction of N-CDs from the AgMOFsN-CDs with proteins, enhanced by NIR light due to the nanocomposite's optical characteristics. Remarkably, the complete wound closure in the in vitro scratch assay was achieved exclusively with the combined NIR and AgMOFsN-CDs treatment, demonstrating the promising application of combined AgMOFsN-CDs with NIR light photodynamic therapy in regenerative nanomedicine and tissue engineering.
RESUMEN
The development of biobased polymeric materials for wastewater purification has become a demand due to the growing need for water free of hazardous metal ions for safe purposes. The organic components of the OLLW including carbohydrates, phenolics, aromatic acids and others are cost-effective and sustainable choices for this application. This work focuses on a method for turning the organic components of liquid waste from the olive industry (OILW) into a foam-based value-added polymer that has several metal ion binding sites. The process of making the target polymers involved reacting the components of the OILW with hexamethylene diisocyante and 1,4-phnyelene diisocynate to create the polymeric materials LHMIDIC and LPDIC that are in foam forms with urethane linkages, respectively. The adsorption competence of the polymeric foams toward Pb(II) was evaluated as a function of various parameters including adsorbent dose, pH, temperature, initial ion concentration and time. The optimum parameters values that led to a quantitative removal of Pb(II) were identified. The obtained thermodynamic parameters showed that the adsorption by the two foams was spontaneous at room temperature. The isothermal and kinetic values showed that the adsorption by synthesized foams follows a second order kinetic and obeys the Langmuir isothermal model. The foams showed a high tendency for removing multi metal ions present in a real sample of wastewater. The original nature of the starting material used in making the foam, cost and the obtained results showed the potential of using the foam in a large-scale plants of wastewater purification.
RESUMEN
The reprogramming of human somatic cells to induced pluripotent cells (iPSCs) has become a milestone and a paradigm shift in the field of regenerative medicine and human disease modeling including drug testing and genome editing. However, the molecular processes occurring during reprogramming and affecting the pluripotent state acquired remain largely unknown. Of interest, different pluripotent states have been described depending on the reprogramming factors used and the oocyte has emerged as a valuable source of information for candidate factors. The present study investigates the molecular changes occurring in somatic cells during reprogramming with either canonical (OSK) or oocyte-based (AOX15) combinations using synchrotron-radiation Fourier transform infrared (SR FTIR) spectroscopy. The data acquired by SR FTIR indicates different representation and conformation of biological relevant macromolecules (lipids, nucleic acids, carbohydrates and proteins) depending on the reprogramming combination used and at different stages during the reprogramming process. Association analysis based on cells spectra suggest that pluripotency acquisition trajectories converge at late intermediate stages while they diverge at early stages. Our results suggest that OSK and AOX15 reprogramming operates through differential mechanisms affecting nucleic acids reorganization and day 10 comes out as a candidate hinge point to further study the molecular pathways involved in the reprogramming process. This study indicates that SR FTIR approach contribute unpaired information to distinguish pluripotent states and to decipher pluripotency acquisition roadmaps and landmarks that will enable advanced biomedical applications of iPSCs.
Asunto(s)
Células Madre Pluripotentes Inducidas , Ácidos Nucleicos , Humanos , Reprogramación Celular , Células Madre Pluripotentes Inducidas/metabolismo , Sincrotrones , Espectroscopía Infrarroja por Transformada de Fourier , OocitosRESUMEN
Carbon dots (CDs) are carbon-based nanoparticles with very attractive luminescence features, which simplicity and flexibility of their fabrication can lead to an endless number of CDs with distinct properties and applications. High fluorescence quantum yields (QYFL) are generally a necessary feature for various applications of CDs. One commonly employed strategy to improve the fluorescence properties of CDs is heteroatom-doping using precursors containing desired heteroatoms (with focus on N-doping). In this work, we report the synthesis and systematic investigation of an array of N-doped CDs, obtained from the dry heating of solid mixtures of glucose and urea in different molar ratios with two main objectives: to study the role of stoichiometry in the optical properties and composition of CDs and to investigate the formation of possible alkaline-responsive nanoparticles and the potential of this procedure for obtaining CDs with higher synthesis yields. We have characterized the optical properties of this diverse array of glucose and urea-based CDs using both UV-Vis and fluorescence spectroscopies. In addition, we have also examined the CDs by using high-resolution transmission electron microscopy (HR-TEM) and X-Ray photoelectron (XPS) spectroscopy, as well as by assessing the thermal stability of the nanoparticles. We have found that this fabrication process generates two types of CDs, one readily soluble in water and other only soluble at basic pH. The latter was characterized by higher synthesis yields, and lower QYFL and thermal stability, when compared with those of the former. Furthermore, the stoichiometry of the N-dopant does not appear to be correlated with the QYFL of the obtained CDs. This study provides novel information that should be useful for the future rational development of CDs with higher QYFL and synthesis yields.
Asunto(s)
Luminiscencia , Puntos Cuánticos , Carbono/química , Puntos Cuánticos/química , Nitrógeno/química , Colorantes Fluorescentes/química , Espectrometría de Fluorescencia , Concentración de Iones de HidrógenoRESUMEN
This work reports two methods developed for the separation and determination of the enantiomers of the new alkaloid malacitanine (MLC) and the determination of the enantiomeric purity in mixtures. First, the isomers were separated using a Chirex 3020 (250 mm × 4.6 mm, 5 µm) chiral column with a mobile phase of cyclohexane-1,2-dichloroethane-ethanol-trifluoroacetic acid (64:30:6:0.6, v/v/v/v) at a flow rate of 1 mL/min and fluorimetric detection. Obtained retention times were 12.4 and 15.9 min (+ and -) with a resolution Rs of 1.13. Relative standard deviations (RSDs) were 2.5 and 2.4% at the 0.5-µg level (four determinations). Second, a nonenantioselective procedure for the determination of enantiomeric purity of MLC using a Lichrospher ® Si-60 (250 mm × 5 mm, 5 µm) normal phase with a mobile phase of 100% ethanol at a flow rate of 0.9 mL/min coupled to two detectors in series, fluorimetric and polarimetric. RSD of 3.3% was obtained. Calculated enantiomeric purity by chiral chromatography gave 48.6% (-)-MLC in the near racemic product. Using polarimetric signal of the nonseparated enantiomers and comparing the slopes of the calibration curves (enantiomers) from the racemic product gave 47.8% (-)-MLC content. A study of accuracy of (-)-MLC gave recoveries from 98.3 to 100.7%.
Asunto(s)
Alcaloides/química , Cromatografía Líquida de Alta Presión/métodos , Fluorometría/métodos , Alcaloides/aislamiento & purificación , EstereoisomerismoRESUMEN
BACKGROUND: Cellulose polymers with multidentate chelating functionalities that have high efficiency for toxic metal ions present in water were designed, synthesized, and analyzed. The synthesis was carried out by reacting microcrystalline cellulose extracted from the solid waste of the olive industry with tert-Butyl acetoacetate (Cell-AA), produced cellulose with ß-ketoester functionality was then reacted with aniline and the amino acid glycine to produce Cell-ß-AN and Cell-ß-GL, respectively. RESULTS: The adsorption efficiency of the three polymers toward Pb(II) and various toxic metal ions present in sewage was evaluated as a function of adsorbent dose, time, temperature, pH value, and initial ion concentration to determine optimum adsorption conditions. The three polymers showed excellent efficiency toward about 20 metal ions present in a sewage sample collected from the sewer. The adsorption process follows the Langmuir adsorption isotherm model with a second-order of adsorption rate, the calculated qe values (2.675, 15.252, 20.856 mg/g) were close to the experimental qe values (2.133, 13.91, 18.786 mg/g) for the three polymers Cell-AA, Cell-ß-AG and Cell-ß-AN, respectively. Molecular Dynamic (MD) and Monte Carlo (MC) simulations were performed on the three polymers complexed with Pb(II). CONCLUSION: The waste material of the olive industry was used as a precursor for making the target cellulose polymers with ß-Amino Ester Pendant Group. The polymer was characterized by SEM, proton NMR, TGA, and FT-IR spectroscopy. The efficacy of adsorption was quantitative for metal ions present in a real sample of wastewater and the efficiency didn't drop even after 7 cycles of use. The results indicate the existence of strong complexation. The thermodynamic study results showed a spontaneous bonding between of Pb(II) and the polymers pendant groups expressed by the negative value of the Gibbs free energy.
RESUMEN
In the last decade, targeting membrane lipids in cancer cells has been a promising approach that deserves attention in the field of anticancer drug development. To get a comprehensive understanding of the effect of the drug [Ru(η5-Cp)(PPh3)2CN] (RuCN) on cell lipidic components, we combine complementary analytical approaches, matrix-assisted laser desorption and ionization time-of-flight mass spectrometry (MALDI TOF MS) and synchrotron radiation-based Fourier transform infrared (SR-FTIR) spectroscopy. Techniques are used for screening the effect of potential metallodrug, RuCN, without and with drug carriers (carbon dots (CDs) and nitrogen-doped carbon dots (N-CDs)) on the lipids of the human ovarian cancer cell line A2780. MALDI TOF MS results revealed that the lysis of ovarian cancer membrane lipids is promoted by RuCN and not by drug carriers (CDs and N-CDs). Furthermore, SR-FTIR results strongly suggested that the phospholipids of cancer cells undergo oxidative stress after the treatment with RuCN that was accompanied by the disordering of the fatty acid chains. On the other hand, using (N-)CDs as RuCN nanocarriers prevented the oxidative stress caused by RuCN but did not prevent the disordering of the fatty acid chain packing. Finally, we demonstrated that RuCN and RuCN/(N-)CDs alter the hydration of the membrane surface in the membrane-water interface region.
RESUMEN
CdSe quantum dots nanoparticles were coated with the thiolated (DiAminoButane based dendrimer) DAB dendrimer of fifth generation (S-DAB5) and embedded in a highly hydrophilic regenerated cellulose (RC) film by simple dip-coating method (immersion in QD-dendrimer aqueous solution) as a way to get a flexible nano-engineered film (RC-4/CdSe-QDs@S-DAB5) with high transparency and photoluminescence properties for different applications. Optical changes in the RC film associated with QDs inclusion were determined by spectroscopic ellipsometry (SE) measurements, which provide information on changes caused in the refraction index and the extinction coefficients of the film, as well as by light transmittance/reflectance curves and photoluminescence (PL) spectra. Impedance spectroscopy (IS) and other typical physicochemical techniques for material characterization (TEM, SEM and XPS) have also been used in order to have more complete information on film characteristics. A comparison of RC-4/CdSe-QDs@S-DAB5 film optical characteristics with those exhibited by other RC-modified films depending on the type of dendrimer was also carried out.
RESUMEN
This work analyzes chemical surface and optical characteristics of a commercial nanoporous alumina structure (NPAS) as a result of surface coverage by different imidazolium-based ionic liquids (1-butyl-3-metylimidazolium hexafluorophosphate, 3-methyl-1-octylimidazolium hexafluorophosphate, or 1-ethyl-3-methylimidazolium tetrafluoroborate). Optical characteristics of the IL/NPAS samples were determined by photoluminescence (at different excitation wavelengths (from 300 nm to 400 nm), ellipsometry spectroscopy, and light transmittance/reflectance measurements for a range of wavelengths that provide information on modifications related to both visible and near-infrared regions. Chemical surface characterization of the three IL/NPAS samples was performed by X-ray photoelectron spectroscopy (XPS), which indicates almost total support coverage by the ILs. The IL/NPAS analyzed samples exhibit different photoluminescence behavior, high transparency (<85%), and a reflection maximum at wavelength ~380 nm, with slight differences depending on the IL, while the refractive index values are rather similar to those shown by the ILs. Moreover, the illuminated I−V curves (under standard conditions) of the IL/NPAS samples were also measured for determining the efficiency energy conversion to estimate their possible application as solar cells. On the other hand, a computational quantum mechanical modeling method (DFT) was used to establish the most stable bond between the ILs and the NPAS support.
RESUMEN
Carbon dots (CDs) and N-carbon dots (N-CDs) loaded with Ru-complex (CDs@RuCN, N-CDs@RuCN, respectively) were investigated as media imposing biochemical changes induced by UV illumination of ovarian cancer, A2780, and osteosarcoma, CAL72, cells. Synchrotron radiation-based Fourier Transform Infrared Spectroscopy was performed, and the spectra were subjected to a Principal Component Analysis. The CDs@RuCN and N-CDs@RuCN effects on cancer cells were analyzed by the theoretical modelling of the stability of the composite systems and a protein database search. Moreover, a detailed evaluation of surface and optical properties of CDs@RuCN and N-CDs@RuCN was carried out. Results demonstrated selective action of the CDs@RuCN and N-CDs@RuCN-based photodynamic therapy, with N-CDs@RuCN being the most active in inducing changes in A2780 and CDs@RuCN in CAL72 cells. We assume that different surface charges of nanoparticles led to direct interactions of N-CDs@RuCN with a Wnt signalling pathway in A2780 and those of CDs@RuCN with PI3-K/Akt in CAL72 cells and that further biochemical changes occurred upon light illumination.