RESUMEN
We present an acoustically actuated microfluidic mixer, which can operate at flowrates reaching 8 ml min-1, providing a 50-fold improvement in throughput compared to previously demonstrated acoustofluidic approaches. The device consists of a robust silicon based micro-mechanical oscillator, sandwiched between two polymeric channels which guide the fluids in and out of the system. The chip is actuated by application of an oscillatory electrical signal onto a piezoelectric disk coupled to the substrate by adhesive. At the optimal frequency, this acoustofluidic system can homogenise two fluids with a relative mixing efficiency of 91%, within 4.1 ms from first contact. The micromixer has been used to synthesize two different systems: Budesonide nanodrugs with an average diameter of 80 ± 22 nm, and DNA nanoparticles with an average diameter of 63.3 ± 24.7 nm.
RESUMEN
To harness light-matter interactions at the nano-/micro-scale, better tools for control must be developed. Here, it is shown that by applying an external electric and/or magnetic field, ablation of Si and glass under ultra-short (sub-1 ps) laser pulse irradiation can be controlled via the Lorentz force F = e E + e [ v × B ] , where v is velocity of charge e, E is the applied electrical bias and B is the magnetic flux density. The external electric E-field was applied during laser ablation using suspended micro-electrodes above a glass substrate with an air gap for the incident laser beam. The counter-facing Al-electrodes on Si surface were used to study debris formation patterns on Si. Debris was deposited preferentially towards the negative electrode in the case of glass and Si ablation. Also, an external magnetic field was applied during laser ablation of Si in different geometries and is shown to affect ripple formation.