Prominin-1 controls stem cell activation by orchestrating ciliary dynamics.

Proper temporal and spatial activation of stem cells relies on highly coordinated cell signaling. The primary cilium is the sensory organelle that is responsible for transmitting extracellular signals into a cell. Primary cilium size, architecture, and assembly-disassembly dynamics are under rigid cell cycle-dependent control. Using mouse incisor tooth epithelia as a model, we show that ciliary dynamics in stem cells require the proper functions of a cholesterol-binding membrane glycoprotein, Prominin-1 (Prom1/CD133), which controls sequential recruitment of ciliary membrane components, histone deacetylase, and transcription factors. Nuclear translocation of Prom1 and these molecules is particularly evident in transit amplifying cells, the immediate derivatives of stem cells. The absence of Prom1 impairs ciliary dynamics and abolishes the growth stimulation effects of sonic hedgehog (SHH) treatment, resulting in the disruption of stem cell quiescence maintenance and activation. We propose that Prom1 is a key regulator ensuring appropriate response of stem cells to extracellular signals, with important implications for development, regeneration, and diseases.

Time-and cost-effective 3-dimensional-printing workflow to rehabilitate worn dentitions: A clinical report.

Current restorative methods of restoring worn or eroded dentition present drawbacks that may deter dentists or patients from pursuing complete mouth rehabilitation. A novel additive manufacturing approach using 3D-printed definitive composite resin restorations is described as a less technique-sensitive and more cost-effective alternative. These restorations are straightforward to repair, modify, or replace.

Effect of light-curing time and direction on microhardness of a light-cured resin composite to cement CAD-CAM restorations.

PURPOSE: To evaluate the effect of light-curing exposure time and location on polymerization of a restorative bulk-fill resin composite to lute endocrowns. METHODS: A light-cured restorative bulk-fill resin composite (Filtek One Bulk Fill) was submitted to direct light-curing by a high-power LED light-curing unit for 20 seconds as the positive control group (n= 10). Five more groups (n= 10) were light-cured in a natural tooth mold from two sites (labial and lingual) through a nanohybrid resin composite CAD-CAM restoration (Lava Ultimate A2 LT), for different irradiation times: 90 seconds per site, 40 seconds per site, 30 seconds per site, 20 seconds per site and 10 seconds per site. Vickers microhardness measurements were made at two different depths and test/control ratios were calculated. Ratios of 0.8 were considered as an adequate level of curing. A quantile regression was run to identify the minimally sufficient time of light-curing, and a two-way ANOVA was used to compare the results to previous findings and evaluate the effect of curing location. RESULTS: Analysis showed that 40 seconds x 2 is the minimal irradiation time that presents a test/control ratio above 0.8. Quantile regressions showed that the required irradiation time to reach a test/control ratio of 0.8 at a confidence level of 95% is 41.5 seconds and 39.2 seconds at 200 µm and 500 µm depths in the luting agent, respectively. There was no statistically significant difference between microhardness of the two depths except for the irradiation time of 10 seconds. The two-site to three-site light curing comparison showed no statistically significant difference except for the 90-second time. CLINICAL SIGNIFICANCE: Systematic light-curing through the labial, lingual and occlusal surfaces of thick indirect restorations is not always required for sufficient polymerization and can even waste valuable clinical time especially in the case of multiple restorations luted with resin composites.

Efficiency of 3D-printed composite resin restorations compared with subtractive materials: Evaluation of fatigue behavior, cost, and time of production.

STATEMENT OF PROBLEM: Three-dimensionally (3D)-printed composite resins have been marketed as materials for definitive restorations. However, limited information is available regarding the stability of the adhesive interface and the efficiency of 3D-printed composite resins. PURPOSE: The purpose of this in vitro study was to evaluate the integrity of the marginal adhesive interface before and after thermal and mechanical fatigue of an initial formulation of a 3D-printed composite resin and to evaluate the efficiency of this manufacturing method. MATERIAL AND METHODS: Freshly extracted molars were prepared for onlays and adhesively restored with either 3D-printed composite resin (VarseoSmile Crown Plus) (Group 3D), milled composite resin (Tetric CAD) (Group MCOMP), milled PMMA (Telio CAD) (Group PMMA), and milled lithium disilicate (IPS e.max CAD) (Group EM). Marginal analysis was performed under a scanning electron microscope before and after fatigue by thermomechanical cyclic loading, and initial and terminal percentages of continuous margin (%CM) were compared. The time required for the production of each type of restoration was recorded, and the production costs were also compared. RESULTS: Before aging, 3D, MCOMP, and EM presented comparable values of %CM (69.8%, 75.9%, and 63.1%, respectively) that were statistically significantly higher (P<.05) than those of PMMA (45.1%). After aging, 3D and EM had comparable results (44.7% and 43.7%, respectively), which were lower than those of the MCOMP group (68.5%) but higher than those of the PMMA group (20.5%). Regarding time efficiency, 3D printing took less time than MCOMP or PMMA if more than 8 restorations were fabricated. For the production costs, 3D printing was 5.5, 8.7, and 10.2 times less expensive than PMMA, MCOMP, and EM, respectively. The initial equipment cost was also lower for the additive manufacturing method. However, 3D printing did not always considerably reduce waste. CONCLUSIONS: In terms of marginal adaptation, the evaluated initial formulation of a 3D-printed composite resin behaved similarly to other well-established definitive restoration materials and better than milled PMMA, both before and after fatigue. Three-dimensionally printed resins present advantages in terms of equipment and consumable costs, even for a single restoration, but also for production time when more than 8 restorations were fabricated.

Fracture strength of non-invasively reinforced MOD cavities on endodontically treated teeth.

The purpose of this in-vitro study was to evaluate the fracture resistance and failure mode of non-invasively reinforced endodontically treated mandibular molars. Sixty freshly extracted defect-free mandibular molars were divided into four experimental groups with extensive MOD cavities on endodontically treated teeth with different restoration types and one control group with intact teeth (n = 12). The groups were as follows: "Normal": direct resin composite; "Ring": glass fiber-reinforced strip (Dentapreg) wrapped around buccal and lingual walls followed by direct resin composite; "Inlay": indirect CAD/CAM resin composite inlay; "Onlay": indirect CAD/CAM resin composite onlay; "Intact": Intact teeth (Control). Tetric EvoCeram and Adhese Universal (Ivoclar Vivadent) were used for direct restorations and Tetric CAD (Ivoclar Vivadent) adhesively luted with Adhese Universal and Variolink Esthetic LC (Ivoclar Vivadent) were used for indirect restorations. All teeth were submitted to thermo-mechanical cyclic loading. All samples were then submitted to a compressive load until fracture. Fracture load was noted and teeth were analyzed to classify the failure mode as either catastrophic (C) or non-catastrophic (NC). No statistically significant difference was found between fracture strength of the five groups when all specimens were considered (p = 0.1461). Intact group showed the lowest percentage of catastrophic failures (41.67%). Ring group presents less catastrophic failures (75%) than Normal group (83.34%), and failures of indirect restorations-Inlay and Onlay-were almost all catastrophic (91.67% and 100%, respectively).

Influence of mechanical and chemical degradation on surface gloss of direct and CAD-CAM resin composite materials.

PURPOSE: To compare the gloss retention of four resin based materials, two direct resin composites (Tetric EvoCeram and Filtek Supreme) and two indirect resin composite CAD-CAM blocks (Tetric CAD and Lava Ultimate). METHODS: 36 samples of 1 mm thickness were readied of each test material and manually polished with polishing discs (Sof-Lex) up to the finest grit size. Three gloss measurements per sample were taken (one every 120 degrees of sample rotation) by means of a glossmeter (Novo-Curve) for a total of 60 values obtained per tested material. Samples of each material were then randomly divided into three equal groups and aged with 75% alcohol (Group 1), amine fluoride gel (Elmex gelée) (Group 2) or mechanical brushing (Group 3). Another set of gloss measurements was performed on all samples after 1 hour of aging. Gloss values were statistically evaluated by means of repeated measures ANOVA and Fisher's LSD post-hoc tests. RESULTS: Gloss retention values ranged from 59.0 (Tetric EvoCeram) to 70.9 (Lava Ultimate) for alcohol, from 59.3 (Filtek Supreme) to 67.5 (Lava Ultimate) for Elmex gelèe and from 33.3 (Tetric EvoCeram) to 53.4 (Lava Ultimate) for mechanical brushing. Statistical analysis revealed: (1) significant difference between intial and final gloss values for all materials and groups; (2) significant difference between final gloss values of all the materials in the alcohol group; (3) significant difference between final gloss values of Lava Ultimate and all the other materials in the Elmex gelèe group; (4) significant difference between final gloss values of Lava Ultimate and Tetric CAD with the other tested materials in the brushing group. CLINICAL SIGNIFICANCE: Direct resin composites in general are widely used, and CAD-CAM resin composite materials are becoming progressively more accessible. Making the choice between direct and indirect techniques is still a challenge, and understanding the advantages of CAD-CAM resin composites in the form of higher gloss retention, which translates into higher durability of esthetics, may be one the parameters facilitating the decision.

Effect of light-curing time on microhardness of a restorative bulk-fill resin composite to lute CAD-CAM resin composite endocrowns.

PURPOSE: To evaluate the minimal irradiation time to reach a sufficient polymerization of a photopolymerizable restorative bulk-fill resin composite to lute endocrowns. METHODS: A photopolymerizable restorative bulk-fill resin composite (Filtek One Bulk Fill) was submitted to direct light-curing by a high power LED light-curing unit for 20 seconds as the positive control group (n = 10). Five more test groups (n= 10) were light-cured in a natural tooth mold from three sites (buccal, palatal and occlusal) under a 9.5 mm thick nanohybrid resin composite CAD-CAM endocrown (Lava Ultimate A2 LT), for different irradiation times: 90 seconds per site, 40 seconds per site, 30 seconds per site, 20 seconds per site and 10 seconds per site. Vickers microhardness measurements were made at two different depths and test/control ratios were calculated. Ratios of 0.8 were considered as an adequate level of curing. RESULTS: Analysis shows that 30 seconds x 3 was the minimal irradiation time that presented a test/control ratio above 0.8. Quantile regressions showed that the required irradiation time to reach a test/control ratio of 0.8 at a confidence level of 95% was 38 seconds and 37 seconds for 200 µm and 500 µm, respectively. There was no statistically significant difference between microhardness of the two depths except for the irradiation time of 10 seconds. A 120-second (40 seconds per buccal, palatal and occlusal site) light-curing of photopolymerizable bulk-fill resin composite to lute a resin composite CAD-CAM endocrown restoration can be considered sufficient to reach adequate polymerization.

Staining susceptibility of resin composite materials.

PURPOSE: To evaluate the color stability of three resin-based materials continuously exposed to various staining agents. METHODS: 144 disc-shaped specimens were made of each of the three tested composites (Essentia, Brillant, Inspiro). Half of them were 1 mm thick, the other half 1.2 mm thick. The thicker group was then polished up to 4,000 grit and reduced to 1 mm thickness, also. All specimens, after 24-hour dry storage in an incubator, received an initial color measurement by means of a calibrated reflectance spectrophotometer (SpectroShade). Specimens were then divided into six groups (n=6) and immersed in five staining solutions or artificial saliva (control). All specimens were kept in an incubator at 37°C for 28 days. Staining solutions (red wine, curry mixed in water, curry mixed in oil, tea and coffee) were changed every 7th day to avoid bacteria or yeast contamination. After 28 days of storage, spectrophotometric measurements were repeated and L*a*b* scores once more recorded to determine the color (ΔE00) changes. RESULTS: All tested materials showed significant color changes after 28 days staining immersion. ΔE00 of polished samples varied from 1.1 (Essentia/distilled water measured over a white background as well as Essentia, Inspiro/distilled water measured over a black background) to 32.5 (Inspiro/wine measured over a white background). CLINICAL SIGNIFICANCE: Staining of restorative materials seems to be dependent on the composition of the product itself. Unpolished samples were more prone to staining than the polished ones.

What should we expect from Switzerland's compulsory dental insurance reform?

BACKGROUND: A vast and heated debate is arising in Switzerland as a result of some recent citizens' initiatives aimed at introducing compulsory dental health care insurance. The Grand Conseils of the Vaud, Geneva, and Neuchâtel cantons recently approved three public initiatives and their citizens are expected to vote on the proposal in 2018. The process of collecting signatures has begun in several other cantons and the discussion has now moved to a national level. DISCUSSION: At present, there is no scientific research that can help policy-makers and citizens to understand the main economic implications of such reform. We attempt to fill this gap by analysing three critical issues: the level and determinants of unmet needs for dental care in Switzerland; the protection of vulnerable individuals; and the economic sustainability of reform. RESULTS AND SHORT CONCLUSIONS: The results show that income is not a unique determinant of barriers to access to dental care but rather, cultural and socio-demographic factors impact the perceived level of unmet dental care needs. The reform might only partially, if at all, improve the equity of the current system. In addition, the results show that the 1% wage-based contribution that the reform promoters suggest should finance the insurance is inadequate to provide full and free dental care to Swiss residents, but is merely sufficient to guarantee basic preventive care, whereas this could be provided by dental hygienists for less.

Correction to: Color stability of different composite resins after polishing.

In the original publication of the article, the author's name "Prof. René Daher" was inadvertently missed in the author group. This has been updated in this erratum. Also, the original article has been corrected.

Color stability of different composite resins after polishing.

The goals of the present study were to evaluate, in vitro, the staining of different composite resins submitted to different common beverages, and to compare the staining effect of each of these solutions. A total of 288 specimens were randomly divided into six groups and immersed for 4 weeks in five staining solutions represented by red wine, orange juice, coke, tea and coffee or in artificial saliva as a control group. When analyzed over a black background, mean ΔE00 values varied from 0.8 for Venus Diamond, Saremco Microhybrid and ELS in saliva and Estelite Posterior in coke to 37.6 for Filtek Supreme in red wine. When analyzed over a white background, mean ΔE00 values varied from 0.5 for Saremco Microhybrid in saliva to 51.1 for Filtek Supreme in red wine. All materials showed significant changes in color after 4 weeks of immersion in staining solutions. Significant differences were found between the tested composite resins and also between the staining solutions.

In-office bleaching efficacy on stain removal from CAD/CAM and direct resin composite materials.

OBJECTIVE: To evaluate the efficacy of in-office bleaching on stain removal from stained resin composite and ceramic computer-assisted design/computer-assisted manufacturing (CAD/CAM) blocks and direct resin composites. METHODS: Forty disk-shaped samples were fabricated from each of nine materials: six CAD/CAM (VITABLOCS Mark II, Paradigm MZ100, Exp Vita Hybrid Ceramic, VITA ENAMIC, Exp Kerr, and LAVA Ultimate) and three direct resin composites (Filtek Supreme, Venus Diamond, and Filtek Silorane). Samples were randomly divided into five groups (n = 8), each stained with a particular staining solution. Using a calibrated spectrophotometer and a black background, L*a*b* values were assessed before and after 120 days of staining. Samples were subjected to in-office bleaching using 40% hydrogen peroxide gel for one hour. At subsequent assessment, color change (ΔE) was calculated as the difference between L*a*b* values. Both ANOVA and the Duncan test were used to identify differences between groups (α = 0.05). RESULTS: Bleaching resulted in significant differences in ΔE values for all materials (P < .001). Bleaching efficacy was highly influenced by material composition and staining solution. Residual color values after bleaching for ceramic and hybrid ceramics ranged from -0.49 to 2.35, within the clinically acceptable maximum of 3.3. Values after bleaching for resin-based CAD/CAM ranged from -0.7 to 7.08 while direct resin composites values ranged from -1.47 to 25.13. Coffee left the greatest residual color on all materials. CONCLUSIONS: Based on material nature, 40% hydrogen peroxide bleaching can remove staining. The new resin-based CAD/CAM blocks showed promising results in terms of color stability. CLINICAL SIGNIFICANCE: Bleaching using 40% hydrogen peroxide can be an effective method to remove stains from dental restorations. In this way, restoration replacement as a result of discoloration may no longer be necessary.

Protection Against Discolouration by Two Over-the Counter Desensitising Products.

PURPOSE: To determine in vitro the protection potential against discolouration of two OTC (over-the-counter) desensitising products on enamel and dentin in comparison to a standard toothpaste and water by means of a spectrophotometer. MATERIALS AND METHODS: A total of 96 samples of bovine enamel-dentin complex and 48 of bovine dentin were alternatively immersed in red wine, tea, coffee or water after having been treated by a sodium monofluorophosphate- and calcium phosphate-based product (Curodont Protect), an amine fluoride-based toothpaste (Elmex Red), a stannous chloride-based toothpaste (Elmex Protection Erosion) or distilled water (negative control). Initial (T0) and final colour (T1, after 4 weeks of immersion in staining solutions) of each specimen were assessed by a spectrophotometer. Statistical analysis was done by means of repeated measures ANOVA followed by Fisher's LSD post-hoc test. Differences between T0 and T1 were considered stastistically significant at p ≤ 0.05. RESULTS: When enamel samples were measured over a black background, ΔE00 values (T0-T1) varied from 2.2 (SD 0.7) for amine fluoride-based product/water to 53.9 (SD 7.6) for amine fluoride-based-product/red wine. When dentin samples were measured over a black background, ΔE00 values (T0-T1) varied from 5.4 (SD 0.9) stannous chloride based product/water to 61.6 (SD 3.7) amine fluoride-based product/red wine. CONCLUSION: Specifically, the application of the sodium monofluorophosphate was able to statistically significantly (p ≤ 0.05) reduce discolouration induced by the staining solutions tested only on the enamel-dentin complex, while distilled water and the stannous fluoride-based product were able to statistically significantly (p ≤ 0.05) reduce discolouration induced by the staining solutions tested in pure dentin samples.

Insomnia in adult attention-deficit/hyperactivity disorder: A comparison with borderline personality disorder population in a clinical setting and control participants.

OBJECTIVES: Many adults with attention-deficit/hyperactivity disorder (ADHD) report sleeping difficulties. The relationship between sleep and ADHD is poorly understood, and shows discrepancies between subjective and objective measures. In order to determine the specificity of sleep-associated symptoms in ADHD, subjective sleep assessments among ADHD adult patients were compared with control subjects and with individuals suffering from borderline personality disorder (BPD). METHODS: 129 outpatients with ADHD, 70 with BPD (including 17 patients with BPD and ADHD comorbidity), and 65 control participants were assessed for sleep quality, insomnia, and sleepiness, using the Pittsburgh Sleep Quality Index (PSQI), the Insomnia Severity Index (ISI), and the Epworth Sleepiness Scale (ESS). RESULTS: ADHD- and BPD-sufferers achieved higher insomnia and lower sleep quality scores than control subjects. Clinical groups did not differ in terms of sleep quality, although insomnia was more severe among BPD patients. Depression scores explained most of sleep symptoms, but even when controlling for depression, ADHD sufferers showed higher sleep latency. Inattentive symptoms were associated with somnolence, while hyperactive/impulsive symptoms were associated with insomnia and lower sleep efficiency. CONCLUSION: Sleep-related symptoms associated with ADHD were partly explained by non-specific factors, especially depression symptoms. In a dimensional perspective, hyperactive and inattentive symptoms were associated with specific sleep symptoms.

In vivo and in vitro spectrophotometric evaluation of upper central incisors before and after extraction.

OBJECTIVES: This in vivo and in vitro study investigated the influence of pulpal vitality on the optical properties of teeth over a 1-month period. MATERIALS AND METHODS: We monitored two specific areas (2-mm-thick pure enamel and 3-mm-thick enamel-dentine complex) in 10 teeth against two backgrounds (white and black) using a calibrated reflectance spectrophotometer at the following time points: before extraction (T0); immediately after extraction (T1); at 1-day post-extraction (T2); at 1-week post-extraction (T3); and 1-month post-extraction (T4). We recorded tooth colour based on the Commission Internationale d'Eclairage L*a*b* model and translucency and analysed these characteristics over time using analysis of variance. RESULTS: The 2-mm-thick pure enamel area showed significant changes (p > 0.05) in L*, a* and b* values between before and 1 month after extraction (T0-T4). Translucency was detectable between (T0-T3) and (T0-T4). The 3-mm-thick enamel-dentine complex also exhibited significant differences (p > 0.05) in L*, a* and b* values within (T0-T4). Translucency value changes significantly (p > 0.05) within the first day (T0-T2) and (T0-T3). CIEDE 2000 DE values revealed no statistically significant differences (p < 0.05) in colour between the T0 L*a*b* measures and all the subsequent measures at times T1, T2, T3 and T4. CONCLUSIONS: Within the limitations of this study, we conclude that the optical characteristics (i.e. colour and translucency) of teeth change after extraction. CLINICAL RELEVANCE: The results help understanding the precise moment when the colour of extracted tooth changes to identify optimum time to use a tooth for scientific investigation and determine whether it is necessary to extract pulp tissue beforehand.

Stain susceptibility of composite and ceramic CAD/CAM blocks versus direct resin composites with different resinous matrices.

To evaluate the stain susceptibility of CAD/CAM blocks and direct composite after long term exposure to various staining agents. 40 disk-shaped samples were fabricated from each of nine materials; six CAD/CAM (Vitablocs Mark II, Paradigm MZ100, Experimental Vita Hybrid Ceramic, Vita Enamic, Experimental Kerr and Lava Ultimate) and three direct composites (Filtek Supreme, Venus Diamond and Filtek Silorane). Samples were randomly divided into five groups (n = 8) according to different staining solutions (distilled water, tea, red wine, coffee and artificial saliva). Initial L*a*b* values were assessed using a calibrated digital spectrophotometer. Specimens were immersed in staining solutions and stored in an incubator at 37 °C for 120 days. L*a*b* values were assessed again and color change (∆E) was calculated as difference between recorded L*a*b* values. ANOVA, and Duncan test were used to identify differences between groups (α = 0.05). Significant differences in ∆E values were detected between materials (p = 0.000). Among all staining solutions, the highest ∆E value was observed with red wine. The new CAD/CAM blocks (Vita Enamic, Vita Hybrid Ceramic and Lava Ultimate) showed the highest resistance to staining compared to the MZ100 composite resin blocks. Filtek Silorane, a direct composite, showed high stain resistance values compared to CAD/CAM materials and other direct composites. Ceramic and composite CAD/CAM blocks had lower staining susceptibility than methacrylate based direct composite. Staining susceptibility of the new resin based CAD/CAM materials Vita Enamic and Lava Ultimate was comparable to feldspathic ceramic blocks (Vitablocs Mark II). Filtek Silorane showed promising results that were comparable to some CAD/CAM blocks.

Personality profiles in adults with attention deficit hyperactivity disorder (ADHD).

BACKGROUND: Previous studies suggested that the presence of ADHD in children and young adolescents may affect the development of personality. Whether or not the persistence of ADHD in adult life is associated with distinct personality patterns is still matter for debate. To address this issue, we compared the profiles of the Temperament and Character Inventory (TCI) that assesses personality dimensions in 119 adults ADHD and 403 controls. METHODS: ANCOVA were used to examine group differences (controls vs. ADHD and ADHD inattentive type vs. ADHD combined + hyperactive/impulsive types) in Temperaments and Characters. Partial correlation coefficients were used to assess correlation between TCI and expression and severity of symptoms of ADHD. RESULTS: High novelty seeking (NS), harm avoidance (HA) and self-transcendence (ST) scores as well as low self-directedness (SD) and cooperativeness (C) scores were associated with ADHD diagnosis. Low SD was the strongest personality trait associated with adult ADHD. Cases with the ADHD inattentive type showed higher HA and lower SD scores compared to the combined and hyperactive/impulsive types. High HA scores correlated with inattention symptoms whereas high NS and ST scores were related to hyperactive symptoms. Finally low SD and high NS were associated with increased ADHD severity. CONCLUSIONS: Distinct temperaments were associated with inattentive versus hyperactive/impulsive symptoms supporting the heterogeneous nature of the disorder.

The influence of stratification on color and appearance of resin composites.

The aim of this in vitro study was to determine the influence of the order of composite layers' stratification on resin composites color and appearance when restoring an anterior composite tooth on the 3D color coordinates L*a*b* by use of a spectrophotometer. A total of 192 discs samples made of two different commercial available composite materials (Miris 2 and HRI) of enamel (E) and dentin (D) shade, each with a 1 mm thickness, were divided into 6 configurations. The superposition of 4 samples for a total of 16 specimens per group determined the investigated configurations. All groups showed significant (p < 0.05) differences between them except groups E1DDE and EDDE1 which represent the same order of stratification, measured from the buccal side and from the palatal side. Perceptible differences were detected between all groups except for E1DDE, EDDE1 and EDDD, independent of the background (white or black). The realization of the palatal layer with dentin composite shade did not change the final outcome within the limit of a total 4 mm thickness in comparison to the palatal layer with enamel composite shade.

Silorane, ormocer, methacrylate and compomer long-term staining susceptibility using ΔE and ΔE 00 colour-difference formulas.

The aim of this study was to evaluate the staining susceptibility of a silorane (Filtek Silorane), an ormocer (Ceram X Duo), a methacrylate (Tetric EvoCeram) and a compomer (Dyract) exposed on the long term to various staining agents by using ΔE and ΔE 00 colour-difference formulas. Thirty-six disc-shaped specimens were made of each of the four chemically different materials, randomly divided in six groups (n = 6) and immersed in five staining solutions (red wine, juice, coke, tea and coffee) or stored dry (control) in an incubator at 37 °C for 99 days. Spectrophotometric measurements by means of a spectrophotometer (Spectroshade Handy Dental, MHT) were repeated over a white (L* = 92.6, a* = -1.2, b* = 2.9) and black (L* = 1.6, a* = 1.2, b* = -1.0) background made of plasticized paper, in order to determine the colour changes according to ΔE, ΔE 00 and translucency formulas. Statistical analysis was performed by means of factorial Anova, Fisher's LSD test (post hoc) and a Spearman rank correlation between ΔE and ΔE 00. When analysed over a white background, mean ΔE 00 values were highly significantly different and varied from 0.8 (Ceram X Duo/air) to 20.9 (Ceram X Duo/red wine). When analysed over a black background, mean ΔE 00 values were highly significantly different and varied from 1.0 (Ceram X Duo and Tetric/air) to 25.2 (Ceram X Duo/red wine). Differences in translucency varied from 0.3 (Ceram X Duo/air) to 21.1 (Ceram X Duo/juice). The correlation between ΔE and ΔE 00 over a white background was 0.9928, while over a black background, it was 0.9886.

Evaluation of the Effect of Different Surface Treatments on Luting CAD/CAM Composite Resin Overlay Workpieces.

PURPOSE: To evaluate the effect of different surface treatments on luting CAD/CAM composite resin workpieces. MATERIALS AND METHODS: One-hundred eight (108) composite CAD/CAM block sections (Lava Ultimate) 3 mm in thickness were polished up to 4000 grit and then randomly assigned to 6 experimental groups according to the applied surface treatment (no treatment, sodium bicarbonate [NaHCO3], glycine, alumina [Al2O3], CoJet, and SilJet). After standardized sandblasting procedures, 2 block sections from each group were randomly chosen for the qualitative SEM evaluation of the sandblasted surfaces. The remaining 96 CAD/CAM block sections were luted in pairs using a bonding agent (Single Bond) and a restorative composite resin (Filtek Ultimate). Specimens were aged for 2 weeks in 37°C water with 3000 thermal cycles (5°C/55°C), the microtensile test was performed (n = 30), and the values were statistically analyzed with ANOVA and Tukey's HSD post-hoc test (p = 0.05). RESULTS: The qualitative SEM evaluation of the sandblasted surfaces showed that sodium bicarbonate and glycine had almost no conditioning effect on the CAD/CAM composite resin. In contrast, aluminum oxide, CoJet, and SilJet had a profound conditioning effect on the CAD/CAM composite resin. No treatment, sodium bicarbonate, and glycine specimens were debonded after thermal stressing (0 MPa), while aluminum oxide, CoJet, and SilJet showed high microtensile values (Al2O3: 104.45 ± 18.76 MPa; CoJet: 105.55 ± 11.88 MPa; SilJet: 105.02 ± 20.84 MPa), which were not statistically significantly different from each other. CONCLUSION: Aluminum oxide-based sandblasting powders are the best choice for the surface treatment of CAD/ CAM workpieces.