Prioritizing water availability study settings to address geogenic contaminants and related societal factors.

Water availability for human and ecological uses depends on both water quantity and water quality. The U.S. Geological Survey (USGS) is developing strategies for prioritizing regional-scale and watershed basin-scale studies of water availability across the nation. Previous USGS ranking processes for basin-scale studies incorporated primarily water quantity factors but are now considering additional water quality factors. This study presents a ranking based on the potential impacts of geogenic constituents on water quality and consideration of societal factors related to water quality. High-concentration geogenic constituents, including trace elements and radionuclides, are among the most prevalent contaminants limiting water availability in the USA and globally. Geogenic constituents commonly occur in groundwater because of subsurface water-rock interactions, and their distributions are controlled by complex geochemical processes. Geogenic constituent mobility can also be affected by human activities (e.g., mining, energy production, irrigation, and pumping). Societal factors and relations to drinking water sources and water quality information are often overlooked when evaluating research priorities. Sociodemographic characteristics, data gaps resulting from historical data-collection disparities, and infrastructure condition/age are examples of factors to consider regarding environmental justice. This paper presents approaches for ranking and prioritizing potential basin-scale study areas across the contiguous USA by considering a suite of conventional physical and geochemical variables related to geogenic constituents, with and without considering variables related to societal factors. Simultaneous consideration of societal and conventional factors could provide decision makers with more diverse, interdisciplinary tools to increase equity and reduce bias in prioritizing focused research areas and future water availability studies.

Exploring the Potential of Electrospray-Orbitrap for Stable Isotope Analysis Using Nitrate as a Model.

Widely used isotope ratio mass spectrometers have limited capabilities to measure metabolites, drugs, or small polyatomic ions without the loss of structural isotopic information. A new approach has recently been introduced that uses electrospray ionization Orbitrap to measure multidimensional isotope signatures of intact polar compounds. Using nitrate as a model compound, this study aims to establish performance metrics for comparisons with conventional IRMS at the natural abundance level. We present a framework on how to convert isotopolog intensities to δ values that are commonly used in the isotope geochemistry community. The quantification of seven nitrate isotopologs provides multiple pathways for obtaining the primary N and O δ values including non-mass-dependent O isotope variations, as well as opportunities to explore nonrandom isotopic distributions (i.e., clumping effects) within molecular nitrate. Using automation and the adaptation of measurement principles that are specific to isotope ratio analysis, nitrate δ15NAIR, δ18OVSMOW, and δ17OVSMOW were measured with a long-term precision of 0.4‰ or better for isotopic reference materials and purified nitrate from environmental samples. In addition, we demonstrate promising results for unpurified environmental samples in liquid form. With these new developments, this study connects the two largely disparate mass spectrometry fields of bioanalytical MS and isotope ratio MS, thus providing a route to measure new isotopic signatures in diverse organic and inorganic solutes.

The influence of sample matrix on the accuracy of nitrite N and O isotope ratio analyses with the azide method.

RATIONALE: The isotope ratios of nitrogen (15 N/14 N) and oxygen (18 O/16 O) in nitrite (NO2 - ) can be measured by conversion of the nitrite into nitrous oxide (N2 O) with azide, followed by mass spectrometric analysis of N2 O by gas chromatography isotope ratio mass spectrometry (GC/IRMS). While applying this method to brackish samples, we noticed that the N and O isotope ratio measurements of NO2 - are highly sensitive to sample salinity and to the pH at which samples are preserved. METHODS: We investigated the influence of sample salinity and sample preservation pH on the N and O isotope ratios of the N2 O produced from the reaction of NO2 - with azide. The N2 O isotope ratios were measured by GC/IRMS. RESULTS: Under the experimental reaction conditions, the conversion of NO2 - into N2 O was less complete in lower salinity solutions, resulting in respective N and O isotopic offsets of +2.5‰ and -14.0‰ compared with seawater solutions. Differences in salinity were also associated with differences in the fraction of O atoms exchanged between NO2 - and water during the reaction. Similarly, aqueous NO2 - samples preserved at elevated pH values resulted in the incomplete conversion of NO2 - into N2 O by azide, and consequent pH-dependent isotopic offsets, as well as differences in the fraction of O atoms exchanged with water. The addition of sodium chloride to the reaction matrix of samples and standards largely mitigated salinity-dependent isotopic offsets in the N2 O product, and nearly homogenized the fraction of O atom exchange among samples of different salinity. A test of the hypobromite-azide method to measure N isotope ratios of ammonium by conversion into NO2 - then N2 O revealed no influence of sample salinity on the N isotope ratios of the N2 O product. CONCLUSIONS: We outline recommendations to mitigate potential matrix effects among samples and standards, to improve the accuracy of N and O isotope ratios in NO2 - measured with the azide method.

Constraining the Oxygen Isotopic Composition of Nitrate Produced by Nitrification.

Measurements of the stable isotope ratios of nitrogen (15N/14N) and oxygen (18O/16O) in nitrate (NO3-) enable identification of sources, dispersal, and fate of natural and contaminant NO3- in aquatic environments. The 18O/16O of NO3- produced by nitrification is often assumed to reflect the proportional contribution of oxygen atom sources, water, and molecular oxygen, in a 2:1 ratio. Culture and seawater incubations, however, indicate oxygen isotopic equilibration between nitrite (NO2-) and water, and kinetic isotope effects for oxygen atom incorporation, which modulate the NO3- 18O/16O produced during nitrification. To investigate the influence of kinetic and equilibrium effects on the isotopic composition of NO3- produced from the nitrification of ammonia (NH3), we incubated streamwater supplemented with ammonium (NH4+) and increments of 18O-enriched water. Resulting NO3- 18O/16O ratios showed (1) a disproportionate sensitivity to the 18O/16O ratio of water, mediated by isotopic equilibration between water and NO2-, as well as (2) kinetic isotope discrimination during O atom incorporation from molecular oxygen and water. Empirically, the NO3- 18O/16O ratios thus produced fortuitously converge near the 18O/16O ratio of water. More elevated NO3- 18O/16O values commonly reported in soils and oxic groundwater may thus derive from processes additional to nitrification, including NO3- reduction.