Effect of scan substrates on accuracy of 7 intraoral digital impression systems using human maxilla model.

OBJECTIVE: This study aimed to determine how the accuracy of digital impressions was affected by four common dental substrates using seven prevalent IOS systems to scan the complete arch of a human maxilla. SETTING AND SAMPLE POPULATION: The Department of Oral Rehabilitation at the Medical University of South Carolina. A single cadaver maxilla. MATERIALS AND METHODS: Seven digital intraoral impression systems were used to scan a freshly harvested human maxilla. The maxilla contained several teeth restored with amalgam and composite, as well as unrestored teeth characterized by enamel. Also, three teeth were prepared for full coverage restorations to expose natural dentin. An industrial grade metrology software program that allowed 3D overlay and dimensional computation compared deviations of the complete arch and its substrates on the test model from the reference model. RESULTS: Substrates were significantly different from each other when considering scan data as a whole, as well as when comparing IOS devices individually. Only PlanScan failed to reveal trueness differences between the different substrates, while only Emerald revealed precision differences between the substrates. CONCLUSIONS: Substrate type does impact the overall accuracy of intraoral scans with dentin being the most accurate and enamel being the least accurate. The four substrates scanned impacted the trueness of all IOS devices.

Evaluation of the trueness and precision of complete arch digital impressions on a human maxilla using seven different intraoral digital impression systems and a laboratory scanner.

OBJECTIVES: An impression accuracy study using a cadaver maxilla was performed using both prepared and intact teeth as well as palatal tissue. MATERIALS AND METHODS: Three crown preparations were performed on a cadaver maxilla. Seven different digital impression systems along with polyvinylsiloxane impressions were used to create digital models of the maxilla. Three-dimensional (3D) files of the experimental models were compared to a master model. The 3D files were overlaid and analyzed using a comparison software to create color coded figures that were measured for deviations between the master and experimental models. RESULTS: For scanning tooth structure, only the Planscan was significantly less accurate than the rest of impression techniques. No significant differences in accuracy were found between models created using digital impressions and those created from traditional vinyl polysiloxane impressions with cross arch deviations ranging from 18 to 39 µm for each. CONCLUSIONS: Impressions taken using all digital impression systems, save for the Planscan, were able to accurately replicate the tissues of a complete arch human maxilla. CLINICAL SIGNIFICANCE: Studies examining accuracy of digital impression systems have generally been performed on materials other than dental tissues. Optically, materials such as plastic and metal have properties different from enamel and dentin. This study evaluates accuracy of digital impression systems on human dentin, enamel, and soft tissues.

A three dimensional nerve map of human bladder trigone.

AIM: Central efferent and afferent neural pathways to and from the human urinary bladder are well-characterized, but the location and arborization of these nerves as they traverse the serosa, muscularis, and urothelial layers are not clearly defined. The purpose of this study was to create a three dimensional map of the innervation of the human bladder trigone from the extrinsic perivesical adventitial nerve trunks to the urothelium. METHODS: A male and a female human bladder were harvested from fresh frozen cadavers and fixed in formalin. The bladder neck and trigone region were serially sectioned (5 µm) and every 20th slide was stained (S100), scanned and aligned to create 3D maps. RESULTS: Nerve penetration into the detrusor muscle occurs with the highest frequency at the bladder neck and interureteric ridge. Nerves traveling parallel to the bladder lumen do so in the adventitia, beyond the outer border of detrusor. In females, the depth of these nerve bands is uniform at 0.7-1.7 cm below the luminal surface, the outer limits of which include the anterior vaginal wall. In the male, depth is more variable owing to detrusor hypertrophy with the minimum depth of nerves approximately 0.5 cm near the interureteric ridge and over 1 cm near the bladder neck. CONCLUSIONS: Myelinated neural pathways traversing in the human bladder in the region of the trigone have a discreet regional density. This 3D map of trigonal innervation may provide guidance to more precisely direct therapies for urinary incontinence or pelvic pain. Neurourol. Urodynam. 36:1015-1019, 2017. © 2016 Wiley Periodicals, Inc.

Sexual dimorphisms in three-dimensional masticatory muscle attachment morphometry regulates temporomandibular joint mechanics.

Temporomandibular joint (TMJ) disorders disproportionally affect females, with female to male prevalence varying from 3:1 to 8:1. Sexual dimorphisms in masticatory muscle attachment morphometry and association with craniofacial size, critical for understanding sex-differences in TMJ function, have not been reported. The objective of this study was to determine sex-specific differences in three-dimensional (3D) TMJ muscle attachment morphometry and craniofacial sizes and their impact on TMJ mechanics. Human cadaveric TMJ muscle attachment morphometry and craniofacial anthropometry (10Males; 11Females) were determined by previously developed 3D digitization and imaging-based methods. Sex-differences in muscle attachment morphometry and craniofacial anthropometry, and their correlation were determined, respectively using multivariate general linear and linear regression statistical models. Subject-specific musculoskeletal models of the mandible were developed to determine effects of sexual dimorphisms in mandibular size and TMJ muscle attachment morphometry on joint loading during static biting. There were significant sex-differences in craniofacial size (p = 0.024) and TMJ muscle attachment morphometry (p < 0.001). TMJ muscle attachment morphometry was significantly correlated with craniofacial size. TMJ contact forces estimated from biomechanical models were significantly, 23% on average (p < 0.001), greater for females compared to those for males when generating the same bite forces. There were significant linear correlations between TMJ contact force and both 3D mandibular length (R2 = 0.48, p < 0.001) and muscle force moment arm ratio (R2 = 0.68, p < 0.001). Sexual dimorphisms in masticatory muscle morphology and craniofacial sizes play critical roles in subject-specific TMJ biomechanics. Sex-specific differences in the TMJ mechanical environment should be further investigated concerning mechanical fatigue of TMJ discs associated with TMJ disorders.

Anatomic Customization of Root-Analog Dental Implants With Cone-Beam CT and CAD/CAM Fabrication: A Cadaver-Based Pilot Evaluation.

Existing root-analog dental implant systems have no standardized protocols regarding retentive design, surface manipulation, or prosthetic attachment design relative to the site's unique anatomy. Historically, existing systems made those design choices arbitrarily. For this report, strategies were developed that deliberately reference the adjacent anatomy, implant and restorable path of draw, and bone density for implant and retentive design. For proof of concept, dentate arches from human cadavers were scanned using cone-beam computed tomography and then digitally modeled. Teeth of interest were virtually extracted and manipulated via computer-aided design to generate root-analog implants from zirconium. We created a stepwise protocol for analyzing and developing the implant sites, implant design and retention, and prosthetic emergence and connection all from the pre-op cone-beam data. Root-analog implants were placed at the time of extraction and examined radiographically and mechanically concerning ideal fit and stability. This study provides proof of concept that retentive root-analog implants can be produced from cone-beam data while improving fit, retention, safety, esthetics, and restorability when compared to the existing protocols. These advancements may provide the critical steps necessary for clinical relevance and success of immediately placed root-analog implants. Additional studies are necessary to validate the model prior to clinical trial.

Three-dimensional temporomandibular joint muscle attachment morphometry and its impacts on musculoskeletal modeling.

In musculoskeletal models of the human temporomandibular joint (TMJ), muscles are typically represented by force vectors that connect approximate muscle origin and insertion centroids (centroid-to-centroid force vectors). This simplification assumes equivalent moment arms and muscle lengths for all fibers within a muscle even with complex geometry and may result in inaccurate estimations of muscle force and joint loading. The objectives of this study were to quantify the three-dimensional (3D) human TMJ muscle attachment morphometry and examine its impact on TMJ mechanics. 3D muscle attachment surfaces of temporalis, masseter, lateral pterygoid, and medial pterygoid muscles of human cadaveric heads were generated by co-registering measured attachment boundaries with underlying skull models created from cone-beam computerized tomography (CBCT) images. A bounding box technique was used to quantify 3D muscle attachment size, shape, location, and orientation. Musculoskeletal models of the mandible were then developed and validated to assess the impact of 3D muscle attachment morphometry on joint loading during jaw maximal open-close. The 3D morphometry revealed that muscle lengths and moment arms of temporalis and masseter muscles varied substantially among muscle fibers. The values calculated from the centroid-to-centroid model were significantly different from those calculated using the 'Distributed model', which considered crucial 3D muscle attachment morphometry. Consequently, joint loading was underestimated by more than 50% in the centroid-to-centroid model. Therefore, it is necessary to consider 3D muscle attachment morphometry, especially for muscles with broad attachments, in TMJ musculoskeletal models to precisely quantify the joint mechanical environment critical for understanding TMJ function and mechanobiology.

Electrical Conductivity Method to Determine Sexual Dimorphisms in Human Temporomandibular Disc Fixed Charge Density.

To investigate potential mechanisms associated with the increased prevalence of temporomandibular joint (TMJ) disorders among women, the study objective was to determine sex-dependent and region-dependent differences in fixed charge density (FCD) using an electrical conductivity method. Seventeen TMJ discs were harvested from nine males (77 ± 4 years) and eight females (86 ± 4 years). Specimens were prepared from the anterior band, posterior band, intermediate zone, medial disc and lateral disc. FCD was determined using an electrical conductivity method, assessing differences among disc regions and between sexes. Statistical modeling showed significant effects for donor sex (p = 0.002), with cross-region FCD for male discs 0.051 ± 0.018 milliequivalent moles per gram (mEq/g) wet tissue and 0.043 ± 0.020 mEq/g wet tissue for female discs. FCD was significantly higher for male discs compared to female discs in the posterior band, with FCD 0.063 ± 0.015 mEq/g wet tissue for male discs and 0.032 ± 0.020 mEq/g wet tissue for female discs (p = 0.050). These results indicate FCD contributes approximately 20% towards TMJ disc compressive modulus, through osmotic swelling pressure regulation. Additionally, FCD regulates critical extracellular ionic/osmotic and nutrient environments. Sexual dimorphisms in TMJ disc FCD, and resulting differences in extracellular ionic/osmotic and nutrient environments, could result in altered mechano-electro-chemical environments between males and females and requires further study.

Tensile biomechanical properties of human temporomandibular joint disc: Effects of direction, region and sex.

Approximately 30% of temporomandibular joint (TMJ) disorders include degenerative changes to the articular disc, with sex-specific differences in prevalence and severity. Limited tensile biomechanical properties of human TMJ discs have been reported. Stress relaxation tests were conducted on TMJ disc specimens harvested bilaterally from six males and six females (68.9±7.9 years), with step-strain increments of 5%, 10%, 15%, 20% and 30%, at 1% strain-per-second. Stress versus strain plots were constructed, and Young׳s Modulus, Instantaneous Modulus and Relaxed Modulus were determined. The effects of direction, region, and sex were examined. Regional effects were significant (p<0.01) for Young׳s Modulus and Instantaneous Modulus. Anteroposteriorly, the central region was significantly stiffer than medial and lateral regions. Mediolaterally, the posterior region was significantly stiffer than central and anterior regions. In the central region, anteroposteriorly directed specimens were significantly stiffer compared to mediolateral specimens (p<0.04). TMJ disc stiffness, indicated by Young׳s Modulus and Instantaneous Modulus, was higher in directions corresponding to high fiber alignment. Additionally, human TMJ discs were stiffer for females compared to males, with higher Young׳s Modulus and Instantaneous Modulus, and female TMJ discs relaxed less. However, sex effects were not statistically significant. Using second-harmonic generation microscopy, regional collagen fiber organization was identified as a potentially significant factor in determining the biomechanical properties for any combination of direction and region. These findings establish structure-function relationships between collagen fiber direction and organization with biomechanical response to tensile loading, and may provide insights into the prevalence of TMJ disorders among women.

Lecture recording system in anatomy: possible benefit to auditory learners.

The literature reports that using Learning Recording Systems (LRS) is usually well received by students but that the pedagogical value of LRS in academic settings remains somewhat unclear. The primary aim of the current study is to document students' perceptions, actual pattern of usage, and impact of use of LRS on students' grade in a dental gross and neuroanatomy course. Other aims are to determine if students' learning preference correlated with final grades and to see if other factors like gender, age, overall academic score on the Dental Aptitude Test (DAT), lecture levels of difficulty, type of lecture, category of lecture, or teaching faculty could explain the impact, if any, of the use of LRS on the course final grade. No significant correlation was detected between the final grades and the variables studied except for a significant but modest correlation between final grades and the number of times the students accessed the lecture recordings (r=0.33 with P=0.01). Also, after adjusting for gender, age, learning style, and academic DAT, a significant interaction between auditory and average usage time was found for final grade (P=0.03). Students who classified themselves as auditory and who used the LRS on average for fewer than 10 minutes per access, scored an average final grade of 16.43 % higher than the nonauditory students using the LRS for the same amount of time per access. Based on these findings, implications for teaching are discussed and recommendations for use of LRS are proposed.

Effect of mechanical strain on solute diffusion in human TMJ discs: an electrical conductivity study.

This study investigated the effect of mechanical strain on solute diffusion in human TMJ discs (mean cadaver age 77.8) using the electrical conductivity method. The electrical conductivity, as well as small ion diffusivity, of male and female TMJ discs was determined under three compressive strains. In the male group, the average disc electrical conductivity (mean ± SD) at 0% strain was 5.14 ± 0.97 mS/cm, decreased to 4.50 ± 0.91 mS/cm (-12.3%) at 10% strain, and 3.93 ± 0.81 mS/cm (-23.5%) at 20% compressive strain. Correspondingly, the average disc relative ion diffusivity at 0% strain was 0.44 ± 0.08, decreased to 0.40 ± 0.08 (-8.9%) at 10% strain, and 0.36 ± 0.08 (-16.7%) at 20% compressive strain. In the female group, the average disc electrical conductivity at 0% strain was 5.84 ± 0.59 mS/cm, decreased to 5.01 ± 0.50 mS/cm (-14.2%) at 10% strain, and 4.33 ± 0.46 mS/cm (-25.8%) at 20% compressive strain. Correspondingly, the average disc relative ion diffusivity at 0% strain was 0.49 ± 0.05, decreased to 0.43 ± 0.04 (-11.3%) at 10% strain, and 0.39 ± 0.04 (-19.9%) at 20% compressive strain. The results indicated that mechanical strain significantly impeded solute diffusion through the disc. This mechanical strain effect was larger in the female than in the male human TMJ disc. This study may provide new insights into TMJ pathophysiology.

The region-dependent biphasic viscoelastic properties of human temporomandibular joint discs under confined compression.

The objective of this study was to determine the biphasic viscoelastic properties of human temporomandibular joint (TMJ) discs, correlate these properties with disc biochemical composition, and examine the relationship between these properties and disc dynamic behavior in confined compression. The equilibrium aggregate modulus (H(A)), hydraulic permeability (k), and dynamic modulus were examined between five disc regions. Biochemical assays were conducted to quantify the amount of water, collagen, and glycosaminoglycan (GAG) content in each region. The creep tests showed that the average equilibrium moduli of the intermediate, lateral, and medial regions were significantly higher than for the anterior and posterior regions (69.75+/-11.47kPa compared to 22.0+/-5.15kPa). Permeability showed the inverse trend with the largest values in the anterior and posterior regions (8.51+/-1.36x10(-15)m(4)/Ns compared with 3.75+/-0.72x10(-15)m(4)/Ns). Discs were 74.5% water by wet weight, 62% collagen, and 3.2% GAG by dry weight. Regional variations were only observed for water content which likely results in the regional variation in biphasic mechanical properties. The dynamic modulus of samples during confined compression is related to the aggregate modulus and hydraulic permeability of the tissue. The anterior and posterior regions displayed lower complex moduli over all frequencies (0.01-3Hz) with average moduli of 171.8-609.3kPa compared with 454.6-1613.0kPa for the 3 central regions. The region of the TMJ disc with higher aggregate modulus and lower permeability had higher dynamic modulus. Our results suggested that fluid pressurization plays a significant role in the load support of the TMJ disc under dynamic loading conditions.

Evaluation of a lecture recording system in a medical curriculum.

Recently, the Medical University of South Carolina adopted a lecture recording system (LRS). A retrospective study of LRS was implemented to document the students' perceptions, pattern of usage, and impact on the students' grades in three basic sciences courses (Cell Biology/Histology, Physiology, and Neurosciences). The number of accesses and length of viewings of the recordings were recorded per week for each student and correlated with the grades in each of the three courses. Attendance records were not available. The results showed considerable variability in the use of the LRS by both faculty and students during the entire semester and across all three courses, including week to week variations. Data indicated that 30% of the students did not use the LRS at all with 41% of the students using it very little (less than 10 times for a total of 131 recordings). Specific patterns of usage were identified for each of the three courses throughout the semester, with an increase in access prior or during examination weeks. However, the statistical analysis showed that there was no correlation between the final grades and the usage of LRS. Finally, a survey of the students' perception showed that 74% agreed/strongly agreed that the recordings were useful with 6% disagreeing/strongly disagreeing and 11% undecided. This study showed that the use of LRS might be a viable alternative for students unable to attend lecture due to circumstances such as illness but that more research is needed to truly understand the best pedagogical use of LRS.