Exploring Cr and molten salt interfacial interactions for molten salt applications.

Molten salts play an important role in various energy-related applications such as high-temperature heat transfer fluids and reaction media. However, the extreme molten salt environment causes the degradation of materials, raising safety and sustainability challenges. A fundamental understanding of material-molten salt interfacial evolution is needed. This work studies the transformation of metallic Cr in molten 50/50 mol% KCl-MgCl2via multi-modal in situ synchrotron X-ray nano-tomography, diffraction and spectroscopy combined with density functional theory (DFT) and ab initio molecular dynamics (AIMD) simulations. Notably, in addition to the dissolution of Cr in the molten salt to form porous structures, a δ-A15 Cr phase was found to gradually form as a result of the metal-salt interaction. This phase change of Cr is associated with a change in the coordination environment of Cr at the interface. DFT and AIMD simulations provide a basis for understanding the enhanced stability of δ-A15 Cr vs. bcc Cr, by revealing their competitive phase thermodynamics at elevated temperatures and probing the interfacial behavior of the molten salt at relevant facets. This study provides critical insights into the morphological and chemical evolution of metal-molten salt interfaces. The combination of multimodal synchrotron analysis and atomic simulation also offers an opportunity to explore a broader range of systems critical to energy applications.

Electrochemically Dealloyed 3D Porous Copper Nanostructure as Anode Current Collector of Li-Metal Batteries.

The commercialization of high-energy Li-metal batteries is impeded by Li dendrites formed during electrochemical cycling and the safety hazards it causes. Here, a novel porous copper current collector that can effectively mitigate the dendritic growth of Li is reported. This porous Cu foil is fabricated via a simple two-step electrochemical process, where Cu-Zn alloy is electrodeposited on commercial copper foil and then Zn is electrochemically dissolved to form a 3D porous structure of Cu. The 3D porous Cu layers on average have a thickness of ≈14 um and porosity of ≈72%. This current collector can effectively suppress Li dendrites in cells cycled with a high areal capacity of 10 mAh cm-2 and under a high current density of 10 mA cm-2 . This electrochemical fabrication method is facile and scalable for mass production. Results of advanced in situ synchrotron X-ray diffraction reveal the phase evolution of the electrochemical deposition and dealloying processes.

The interplay between thermodynamics and kinetics in the solid-state synthesis of layered oxides.

In the synthesis of inorganic materials, reactions often yield non-equilibrium kinetic byproducts instead of the thermodynamic equilibrium phase. Understanding the competition between thermodynamics and kinetics is a fundamental step towards the rational synthesis of target materials. Here, we use in situ synchrotron X-ray diffraction to investigate the multistage crystallization pathways of the important two-layer (P2) sodium oxides Na0.67MO2 (M = Co, Mn). We observe a series of fast non-equilibrium phase transformations through metastable three-layer O3, O3' and P3 phases before formation of the equilibrium two-layer P2 polymorph. We present a theoretical framework to rationalize the observed phase progression, demonstrating that even though P2 is the equilibrium phase, compositionally unconstrained reactions between powder precursors favour the formation of non-equilibrium three-layered intermediates. These insights can guide the choice of precursors and parameters employed in the solid-state synthesis of ceramic materials, and constitutes a step forward in unravelling the complex interplay between thermodynamics and kinetics during materials synthesis.

The Role of Water and Hydroxyl Groups in the Structures of Stetindite and Coffinite, MSiO4 (M = Ce, U).

Orthosilicates adopt the zircon structure types (I41/amd), consisting of isolated SiO4 tetrahedra joined by A-site metal cations, such as Ce and U. They are of significant interest in the fields of geochemistry, mineralogy, nuclear waste form development, and material science. Stetindite (CeSiO4) and coffinite (USiO4) can be formed under hydrothermal conditions despite both being thermodynamically metastable. Water has been hypothesized to play a significant role in stabilizing and forming these orthosilicate phases, though little experimental evidence exists. To understand the effects of hydration or hydroxylation on these orthosilicates, in situ high-temperature synchrotron and laboratory-based X-ray diffraction was conducted from 25 to ∼850 °C. Stetindite maintains its I41/amd symmetry with increasing temperature but exhibits a discontinuous expansion along the a-axis during heating, presumably due to the removal of water confined in the [001] channels, which shrink against thermal expansion along the a-axis. Additional in situ high-temperature Raman and Fourier transform infrared spectroscopy also confirmed the presence of the confined water. Coffinite was also found to expand nonlinearly up to 600 °C and then thermally decompose into a mixture of UO2 and SiO2. A combination of dehydration and dehydroxylation is proposed for explaining the thermal behavior of coffinite synthesized hydrothermally. Additionally, we investigated high-temperature structures of two coffinite-thorite solid solutions, uranothorite (UxTh1-xSiO4), which displayed complex variations in composition during heating that was attributed to the negative enthalpy of mixing. Lastly, for the first time, the coefficients of thermal expansion of CeSiO4, USiO4, U0.46Th0.54SiO4, and U0.9Th0.1SiO4 were determined to be αV = 14.49 × 10-6, 14.29 × 10-6, 17.21 × 10-6, and 17.23 × 10-6 °C-1, respectively.

Combined computational and experimental investigation of the La2CuO4-x S x (0 ≤ x ≤ 4) quaternary system.

The lack of a mechanistic framework for chemical reactions forming inorganic extended solids presents a challenge to accelerated materials discovery. We demonstrate here a combined computational and experimental methodology to tackle this problem, in which in situ X-ray diffraction measurements monitor solid-state reactions and deduce reaction pathways, while theoretical computations rationalize reaction energetics. The method has been applied to the La2CuO4-x S x (0 ≤ x ≤ 4) quaternary system, following an earlier prediction that enhanced superconductivity could be found in these new lanthanum copper(II) oxysulfide compounds. In situ diffraction measurements show that reactants containing Cu(II) and S(2-) ions undergo redox reactions, leaving their ions in oxidation states that are incompatible with forming the desired new compounds. Computations of the reaction energies confirm that the observed synthetic pathways are indeed favored over those that would hypothetically form the suggested compounds. The consistency between computation and experiment in the La2CuO4-x S x system suggests a role for predictive theory: to identify and to explicate new synthetic routes for forming predicted compounds.

Kinetic Limitations in Single-Crystal High-Nickel Cathodes.

High-nickel cathodes attract immense interest for use in lithium-ion batteries to boost Li-storage capacity while reducing cost. For overcoming the intergranular-cracking issue in polycrystals, single-crystals are considered an appealing alternative, but aggravating concerns on compromising the ionic transport and kinetic properties. We report here a quantitative assessment of redox reaction in single-crystal LiNi0.8 Mn0.1 Co0.1 O2 using operando hard X-ray microscopy/spectroscopy, revealing a strong dependence of redox kinetics on the state of charge (SOC). Specifically, the redox is sluggish at low SOC but increases rapidly as SOC increases, both in bulk electrodes and individual particles. The observation is corroborated by transport measurements and finite-element simulation, indicating that the sluggish kinetics in single-crystals is governed by ionic transport at low SOC and may be alleviated through synergistic interaction with polycrystals integrated into a same electrode.

Li15P4S16Cl3, a Lithium Chlorothiophosphate as a Solid-State Ionic Conductor.

Tremendous efforts have been devoted to the design of solid Li+ electrolytes and the development of all-solid-state batteries. Compared with conventional Li-ion batteries, which use flammable liquid organic electrolytes, all-solid-state batteries show significant advantages in safety. In this work, a novel lithium chlorothiophosphate compound, Li15P4S16Cl3, is discovered. The crystal structure and electrochemical properties are investigated. Li15P4S16Cl3 can be synthesized as a pure phase via a facile solid-state reaction by heating a ball-milled mixture of Li2S, P2S5, and LiCl at 360 °C. The crystal structure of Li15P4S16Cl3 was refined against neutron and synchrotron powder X-ray diffraction data, revealing that it crystallizes in the space group I4̅3d. The Li+ transport in Li15P4S16Cl3 was also investigated by multiple solid-state NMR methods, including variable-temperature NMR line-shape analysis, NMR relaxometry, and pulsed-field-gradient NMR. Li15P4S16Cl3 shows good thermodynamic stability and can be synthesized at relatively low temperature. Although it exhibits a low ionic conductivity at room temperature, it can serve as a new motif crystal structure for the design and development of new solid-state electrolytes.

Lithium-Doping Stabilized High-Performance P2-Na0.66Li0.18Fe0.12Mn0.7O2 Cathode for Sodium Ion Batteries.

While sodium-ion batteries (SIBs) hold great promise for large-scale electric energy storage and low speed electric vehicles, the poor capacity retention of the cathode is one of the bottlenecks in the development of SIBs. Following a strategy of using lithium doping in the transition-metal layer to stabilize the desodiated structure, we have designed and successfully synthesized a novel layered oxide cathode P2-Na0.66Li0.18Fe0.12Mn0.7O2, which demonstrated a high  capacity of 190 mAh g-1 and a remarkably high capacity retention of ∼87% after 80 cycles within a wide voltage range of 1.5-4.5 V. The outstanding stability is attributed to the reversible migration of lithium during cycling and the elimination of the detrimental P2-O2 phase transition, revealed by ex situ and in situ X-ray diffraction and solid-state nuclear magnetic resonance spectroscopy.

Guiding Synthesis of Polymorphs of Materials Using Nanometric Phase Diagrams.

Conventionally, phase diagrams serve as road maps for the design and synthesis of materials. However, bulk phase diagrams are often not as predictive for the synthesis of nanometric materials, mainly due to the increased significance of surface energy. The change of surface energy can drastically alter the total energy of the nanocrystals and thus yields a polymorph or metastable phase different from the stable phase in bulk, providing a means for controlling the synthesis of metastable phases. To achieve a theoretical and systematical understanding on the polymorphism of nanomaterials, metallic cobalt was chosen as a model system, where the two polymorphs, fcc and hcp phases, can be tuned with 100% selectivity in a solvothermal reaction. Advanced in situ synchrotron X-ray diffraction (XRD) technique and density functional theory (DFT) calculations were complementarily employed to reveal the size- and surface-dependent polymorphism at nanometer scale. The nanometric phase diagram provides a general predictive approach to guide the synthesis of metastable materials.

Cationic Ordering Coupled to Reconstruction of Basic Building Units during Synthesis of High-Ni Layered Oxides.

Metal (M) oxides are one of the most interesting and widely used solids, and many of their properties can be directly correlated to the local structural ordering within basic building units (BBUs). One particular example is the high-Ni transition metal layered oxides, potential cathode materials for Li-ion batteries whose electrochemical activity is largely determined by the cationic ordering in octahedra (e.g., the BBUs in such systems). Yet to be firmly established is how the BBUs are inherited from precursors and subsequently evolve into the desired ordering during synthesis. Herein, a multimodal in situ X-ray characterization approach is employed to investigate the synthesis process in preparing LiNi0.77Mn0.13Co0.10O2 from its hydroxide counterpart, at scales varying from the long-range to local individual octahedral units. Real-time observation corroborated by first-principles calculations reveals a topotactic transformation throughout the entire process, during which the layered framework is retained; however, due to preferential oxidation of Co and Mn over Ni, significant changes happen locally within NiO6 octahedra. Specifically, oxygen loss and the associated symmetry breaking occur in NiO6; as a consequence, Ni2+ ions become highly mobile and tend to mix with Li, causing high cationic disordering upon formation of the layered oxides. Only through high-temperature heat treatment, Ni is further oxidized, thereby inducing symmetry reconstruction and, concomitantly, cationic ordering within NiO6 octahedra. Findings from this study shed light on designing high-Ni layered oxide cathodes and, more broadly, various functional materials through synthetic control of the constituent BBUs.

Isotropic Low Thermal Expansion over a Wide Temperature Range in Ti1- xZr xF3+ x (0.1 ≤ x ≤ 0.5) Solid Solutions.

TiF3 exhibits a rhombohedral to ReO3-type cubic phase transformation at ∼340 K. Here we report that, by introducing ZrF4 into TiF3, the cubic phase is stabilized at least down to 123 K in the Ti1- xZr xF3+ x compounds. All compounds exhibit low thermal expansion (LTE) between 123 and 623 K, and a nearly zero thermal expansion (ZTE) was obtained in Ti0.7Zr0.3F3.3 (αL = 0.91 ppm/K). The analysis of pair distribution function reveals that the cation-centered octahedra are partially changed to pentagonal bipyramids in Ti1- xZr xF3+ x due to the excess fluorines relative to the case of TiF3. Therefore, the cooperative rotation of the polyhedra tends to be restricted, and the cubic phase is thus stabilized. The restrained polyhedral rotations compete against the lattice softening caused by the introduction of Zr4+, giving rise to the LTE. Our present strategy is applicable to other rhombohedral metal trifluorides for the design of new isotropic ZTE materials.

Seeker-Azimuth Determination with Gyro Rotor and Optoelectronic Sensors.

This paper presents an approach to seeker-azimuth determination using the gyro rotor and optoelectronic sensors. In the proposed method, the gyro rotor is designed with a set of black and white right spherical triangle patterns on its surface. Two pairs of optoelectronic sensors are located symmetrically around the gyro rotor. When there is an azimuth, the stripe width covering the black and white patterns changes. The optoelectronic sensors then capture the reflected optical signals from the different black and white pattern stripes on the gyro rotor and produce the duty ratio signal. The functional relationship between the measured duty ratio and the azimuth information is numerically derived, and, based on this relationship, the azimuth is determined from the measured duty ratio. Experimental results show that the proposed approach produces a large azimuth range and high measurement accuracy with the linearity error of less than 0.005.

In Situ Tracking Kinetic Pathways of Li+/Na+ Substitution during Ion-Exchange Synthesis of LixNa1.5-xVOPO4F0.5.

Ion exchange is a ubiquitous phenomenon central to wide industrial applications, ranging from traditional (bio)chemical separation to the emerging chimie douce synthesis of materials with metastable structure for batteries and other energy applications. The exchange process is complex, involving substitution and transport of different ions under non-equilibrium conditions, and thus difficult to probe, leaving a gap in mechanistic understanding of kinetic exchange pathways toward final products. Herein, we report in situ tracking kinetic pathways of Li+/Na+ substitution during solvothermal ion-exchange synthesis of LixNa1.5-xVOPO4F0.5 (0 ≤ x ≤ 1.5), a promising multi-Li polyanionic cathode for batteries. The real-time observation, corroborated by first-principles calculations, reveals a selective replacement of Na+ by Li+, leading to peculiar Na+/Li+/vacancy orderings in the intermediates. Contradicting the traditional belief of facile topotactic substitution via solid solution reaction, an abrupt two-phase transformation occurs and predominantly governs the kinetics of ion exchange and transport in the 1D polyanionic framework, consequently leading to significant difference of Li stoichiometry and electrochemical properties in the exchanged products. The findings may help to pave the way for rational design of ion exchange synthesis for making new materials.

In Situ Neutron Diffraction Studies of the Ion Exchange Synthesis Mechanism of Li2Mg2P3O9N: Evidence for a Hidden Phase Transition.

Motivated by predictions made using a bond valence sum difference map (BVS-DM) analysis, the novel Li-ion conductor Li2Mg2P3O9N was synthesized by ion exchange from a Na2Mg2P3O9N precursor. Impedance spectroscopy measurements indicate that Li2Mg2P3O9N has a room temperature Li-ion conductivity of about 10-6 S/cm (comparable to LiPON), which is 6 orders of magnitude higher than the extrapolated Na-ion conductivity of Na2Mg2P3O9N at this temperature. The structure of Li2Mg2P3O9N was determined from ex situ synchrotron and time-of-flight neutron diffraction data to retain the P213 space group, though with a cubic lattice parameter of a = 9.11176(8) Å that is significantly smaller than the a = 9.2439(1) Å of Na2Mg2P3O9N. The two Li-ion sites are found to be very substantially displaced (∼0.5 Å) relative to the analogous Na sites in the precursor phase. The non-molten salt ion exchange method used to prepare Li2Mg2P3O9N produces a minimal background in powder diffraction experiments, and was therefore exploited for the first time to follow a Li+/Na+ ion exchange reaction using in situ powder neutron diffraction. Lattice parameter changes during ion exchange suggest that the reaction proceeds through a Na2-xLixMg2P3O9N solid solution (stage 1) followed by a two-phase reaction (stage 2) to form Li2Mg2P3O9N. However, full Rietveld refinements of the in situ neutron diffraction data indicate that the actual transformation mechanism is more complex and instead involves two thermodynamically distinct solid solutions in which the Li exclusively occupies the Li1 site at low Li contents (stage 1a) and then migrates to the Li3 site at higher Li contents (stage 1b), a crossover driven by the different signs of the local volume change at these sites. In addition to highlighting the importance of obtaining full structural data in situ throughout the ion exchange process, these results provide insights into the general question of what constitutes a thermodynamic phase.

Explore the Effects of Microstructural Defects on Voltage Fade of Li- and Mn-Rich Cathodes.

Li- and Mn-rich (LMR) cathode materials have been considered as promising candidates for energy storage applications due to high energy density. However, these materials suffer from a serious problem of voltage fade. Oxygen loss and the layered-to-spinel phase transition are two major contributors of such voltage fade. In this paper, using a combination of X-ray diffraction (XRD), pair distribution function (PDF), X-ray absorption (XAS) techniques, and aberration-corrected scanning transmission electron microscopy (STEM), we studied the effects of micro structural defects, especially the grain boundaries, on the oxygen loss and layered-to-spinel phase transition through prelithiation of a model compound Li2Ru0.5Mn0.5O3. It is found that the nanosized micro structural defects, especially the large amount of grain boundaries created by the prelithiation can greatly accelerate the oxygen loss and voltage fade. Defects (such as nanosized grain boundaries) and oxygen release form a positive feedback loop, promote each other during cycling, and accelerate the two major voltage fade contributors: the transition metal reduction and layered-to-spinel phase transition. These results clearly demonstrate the important relationships among the oxygen loss, microstructural defects and voltage fade. The importance of maintaining good crystallinity and protecting the surface of LMR material are also suggested.

Quantification of Honeycomb Number-Type Stacking Faults: Application to Na3Ni2BiO6 Cathodes for Na-Ion Batteries.

Ordered and disordered samples of honeycomb-lattice Na3Ni2BiO6 were investigated as cathodes for Na-ion batteries, and it was determined that the ordered sample exhibits better electrochemical performance, with a specific capacity of 104 mA h/g delivered at plateaus of 3.5 and 3.2 V (vs Na(+)/Na) with minimal capacity fade during extended cycling. Advanced imaging and diffraction investigations showed that the primary difference between the ordered and disordered samples is the amount of number-type stacking faults associated with the three possible centering choices for each honeycomb layer. A labeling scheme for assigning the number position of honeycomb layers is described, and it is shown that the translational shift vectors between layers provide the simplest method for classifying different repeat patterns. It is demonstrated that the number position of honeycomb layers can be directly determined in high-angle annular dark-field scanning transmission electron microscopy (STEM-HAADF) imaging studies. By the use of fault models derived from STEM studies, it is shown that both the sharp, symmetric subcell peaks and the broad, asymmetric superstructure peaks in powder diffraction patterns can be quantitatively modeled. About 20% of the layers in the ordered monoclinic sample are faulted in a nonrandom manner, while the disordered sample stacking is not fully random but instead contains about 4% monoclinic order. Furthermore, it is shown that the ordered sample has a series of higher-order superstructure peaks associated with 6-, 9-, 12-, and 15-layer periods whose existence is transiently driven by the presence of long-range strain that is an inherent consequence of the synthesis mechanism revealed through the present diffraction and imaging studies. This strain is closely associated with a monoclinic shear that can be directly calculated from cell lattice parameters and is strongly correlated with the degree of ordering in the samples. The present results are broadly applicable to other honeycomb-lattice systems, including Li2MnO3 and related Li-excess cathode compositions.

Direct visualization of the Jahn-Teller effect coupled to Na ordering in Na5/8MnO2.

The cooperative Jahn-Teller effect (CJTE) refers to the correlation of distortions arising from individual Jahn-Teller centres in complex compounds. The effect usually induces strong coupling between the static or dynamic charge, orbital and magnetic ordering, which has been related to many important phenomena such as colossal magnetoresistance and superconductivity. Here we report a Na5/8MnO2 superstructure with a pronounced static CJTE that is coupled to an unusual Na vacancy ordering. We visualize this coupled distortion and Na ordering down to the atomic scale. The Mn planes are periodically distorted by a charge modulation on the Mn stripes, which in turn drives an unusually large displacement of some Na ions through long-ranged Na-O-Mn(3+)-O-Na interactions into a highly distorted octahedral site. At lower temperatures, magnetic order appears, in which Mn atomic stripes with different magnetic couplings are interwoven with each other. Our work demonstrates the strong interaction between alkali ordering, displacement, and electronic and magnetic structure, and underlines the important role that structural details play in determining electronic behaviour.

A size-dependent sodium storage mechanism in Li4Ti5O12 investigated by a novel characterization technique combining in situ X-ray diffraction and chemical sodiation.

A novel characterization technique using the combination of chemical sodiation and synchrotron based in situ X-ray diffraction (XRD) has been detailed illustrated. The power of this novel technique was demonstrated in elucidating the structure evolution of Li4Ti5O12 upon sodium insertion. The sodium insertion behavior into Li4Ti5O12 is strongly size dependent. A solid solution reaction behavior in a wide range has been revealed during sodium insertion into the nanosized Li4Ti5O12 (~44 nm), which is quite different from the well-known two-phase reaction of Li4Ti5O12/Li7Ti5O12 system during lithium insertion, and also has not been fully addressed in the literature so far. On the basis of this in situ experiment, the apparent Na(+) ion diffusion coefficient (DNa+) of Li4Ti5O12 was estimated in the magnitude of 10(-16) cm(2) s(-1), close to the values estimated by electrochemical method, but 5 order of magnitudes smaller than the Li(+) ion diffusion coefficient (D(Li+) ~10(-11) cm(2) s(-1)), indicating a sluggish Na(+) ion diffusion kinetics in Li4Ti5O12 comparing with that of Li(+) ion. Nanosizing the Li4Ti5O12 will be critical to make it a suitable anode material for sodium-ion batteries. The application of this novel in situ chemical sodiation method reported in this work provides a facile way and a new opportunity for in situ structure investigations of various sodium-ion battery materials and other systems.

High-Entropy Spinel Oxide Ferrites for Battery Applications.

Four different high-entropy spinel oxide ferrite (HESO) electrode materials containing 5-6 distinct metals were synthesized by a simple, rapid combustion synthesis process and evaluated as conversion anode materials in lithium half-cells. All showed markedly superior electrochemical performance compared to conventional spinel ferrites such as Fe3O4 and MgFe2O4, having capacities that could be maintained above 600 mAh g-1 for 150 cycles, in most cases. X-ray absorption spectroscopy (XAS) results on pristine, discharged, and charged electrodes show that Fe, Co, Ni, and Cu are reduced to the elemental state during the first discharge (lithiation), while Mn is only slightly reduced. Upon recharge (delithiation), Fe is reoxidized to an average oxidation state of about 2.6+, while Co, Ni, and Cu are not reoxidized. The ability of Fe to be oxidized past 2+ accounts for the high capacities observed in these materials, while the presence of metallic elements after the initial lithiation provides an electronically conductive network that aids in charge transfer.

In Situ Insights into Cathode Calcination for Predictive Synthesis: Kinetic Crystallization of LiNiO2 from Hydroxides.

Calcination is a solid-state synthesis process widely deployed in battery cathode manufacturing. However, its inherent complexity associated with elusive intermediates hinders the predictive synthesis of high-performance cathode materials. Here, correlative in situ X-ray absorption/scattering spectroscopy is used to investigate the calcination of nickel-based cathodes, focusing specifically on the archetypal LiNiO2 from Ni(OH)2. Combining in situ observation with data-driven analysis reveals concurrent lithiation and dehydration of Ni(OH)2 and consequently, the low-temperature crystallization of layered LiNiO2 alongside lithiated rocksalts. Following early nucleation, LiNiO2 undergoes sluggish crystallization and structural ordering while depleting rocksalts; ultimately, it turns into a structurally-ordered layered phase upon full lithiation but remains small in size. Subsequent high-temperature sintering induces rapid crystal growth, accompanied by undesired delithiation and structural degradation. These observations are further corroborated by mesoscale modeling, emphasizing that, even though calcination is thermally driven and favors transformation towards thermodynamically equilibrium phases, the actual phase propagation and crystallization can be kinetically tuned via lithiation, providing freedom for structural and morphological control during cathode calcination.